The penetration depth of atomic radicals in tubes with catalytic surface properties

Catalysis of molecular radicals is often performed in interesting experimental configurations.One possible configuration is tubular geometry.The radicals are introduced into the tubes on one side,and stable molecules are exhausted on the other side.The penetration depth of radicals depends on numerous parameters,so it is not always feasible to calculate it.This article presents systematic measurements of the penetration depth of oxygen atoms along tubes made from nickel,cobalt,and copper.The source of O atoms was a surfatron-type microwave plasma.The initial density of O atoms depended on the gas flow and was 0.7×10^(21)m^(-3),2.4×10^(21)m^(-3),and 4.2×10^(21)m^(-3)at the flow rates of 50,300,and 600 sccm,and pressures of 10,35,and 60 Pa,respectively.The gas temperature remained at room temperature throughout the experiments.The dissociation fraction decreased exponentially along the length of the tubes in all cases.The penetration depths for well-oxidized nickel were 1.2,1.7,and 2.4 cm,respectively.For cobalt,they were slightly lower at 1.0,1.3,and 1.6 cm,respectively,while for copper,they were 1.1,1.3,and 1.7 cm,respectively.The results were explained by gas dynamics and heterogeneous surface association.These data are useful in any attempt to estimate the loss of molecular fragments along tubes,which serve as catalysts for the association of various radicals to stable molecules.

The Magnetic Penetration Depth Calculated with the Mechanism of “Close-Shell Inversion”

Meissner effect is one of the two fundamental properties of superconductors, it allows them to actively exclude external magnetic fields from their interior, leaving the field to decay quickly from the surface to the interior within a very thin layer whose thickness is characterized by the penetration depth . Based on the mechanism of “close-shell inversion” for superconductivity proposed earlier, we proceed in this paper to calculate the magnetic penetration depth. It is found that repelling the external magnetic field is just a spontaneous and dynamic response of conduction electrons in superconductors. Calculation results show that the net magnetic field decays exponentially, in consistent with the existing theories and experimental data. .

What types of early gastric cancer are indicated for endoscopic ultrasonography staging of invasion depth?

AIM To clarify the diagnostic efficacy and limitations of endoscopic ultrasonography(EUS) and the characteristics of early gastric cancers(EGCs) that are indications for EUS-based assessment of cancer invasion depth.METHODS We retrospectively investigated the cases of 153 EGC patients who underwent conventional endoscopy(CE) and EUS(20 MHz) before treatment.RESULTS We found that 13.7% were "inconclusive" cases with low-quality EUS images, including all nine of the cases with protruded(0-I)-type EGCs. There was no significant difference in the diagnostic accuracybetween CE and EUS. Two significant independent risk factors for misdiagnosis by EUS were identified-ulcer scarring [UL(+); odds ratio(OR) = 4.49, P = 0.003] and non-indication criteria for endoscopic resection(ER)(OR = 3.02, P = 0.03). In the subgroup analysis, 23.1% of the differentiated-type cancers exhibiting SM massive invasion(SM2) invasion(submucosal invasion ≥ 500 μm) by CE were correctly diagnosed by EUS, and 23.1% of the undifferentiated-type EGCs meeting the expanded-indication criteria for ER were correctly diagnosed by EUS.CONCLUSION There is no need to perform EUS for UL(+) EGCs or 0-I-type EGCs, but EUS may enhance the pretreatment staging of differentiated-type EGCs with SM2 invasion without UL or undifferentiated-type EGCs revealed by CE as meeting the expanded-indication criteria for ER.

Penetration Depth of Torpedo Anchor in Two-Layered Cohesive Soil Bed by Free Fall

The penetration depth of torpedo anchor in two-layered soil bed was experimentally investigated. A total of 177 experimental data were obtained in laboratory by varying the undrained shear strength of the two-layered soil and the thickness of the top soil layer. The geometric parameters of the anchor and the soil properties(the liquid limit, plastic limit, specific gravity, undrained shear strength, density, and water content) were measured. Based on the energy analysis and present test data, an empirical formula to predict the penetration depth of torpedo anchor in two-layered soil bed was proposed. The proposed formula was extensively validated by laboratory and field data of previous researchers. The results were in good agreement with those obtained for two-layered and single-layered soil bed.Finally, a sensitivity analysis on the parameters in the formula was performed.

A simple approach for the estimation of CO_2 penetration depth into a caprock layer

Caprock is a water-saturated formation with a sufficient entry capillary pressure to prevent the upward migration of a buoyant fluid. When the entry capillary pressure of caprock is smaller than the pressure exerted by the buoyant CO2plume, CO2gradually penetrates into the caprock. The CO2penetration depth into a caprock layer can be used to measure the caprock sealing efficiency and becomes the key issue to the assessment of caprock sealing efficiency. On the other hand, our numerical simulations on a caprock layer have revealed that a square root law for time and pore pressure exists for the CO2penetration into the caprock layer. Based on this finding, this study proposes a simple approach to estimate the CO2penetration depth into a caprock layer. This simple approach is initially developed to consider the speed of CO2invading front. It explicitly expresses the penetration depth with pressuring time, pressure difference and pressure magnitude. This simple approach is then used to fit three sets of experimental data and good fittings are observed regardless of pressures, strengths of porous media, and pore fluids(water,hydrochloric acid, and carbonic acid). Finally, theoretical analyses are conducted to explore those factors affecting CO2penetration depth. The effects of capillary pressure, gas sorption induced swelling, and fluid property are then included in this simple approach. These results show that this simple approach can predict the penetration depth into a caprock layer with sufficient accuracy, even if complicated interactions in penetration process are not explicitly expressed in this simple formula.

Ballistic model for the prediction of penetration depth and residual velocity in adobe:A new interpretation of the ballistic resistance of earthen masonry

In this paper, a new one-dimensional phenomenological model is developed for the assessment of the ballistic performance of Adobe. Adobe is a masonry largely spread in areas of the world involved in military operations. Addressing fundamental ballistic parameters such as residual velocity or penetration depth for this building technology is necessary. The model follows the hypotheses for the ballistic response of concrete targets to high velocity impacts, provided with a dominant contribution of shear friction typical of soils. The hypotheses at the basis of the model are consistent with all experimental evidence collected by authors on Adobe. Adobe brick and mortar belong to the material class of concrete,whereas the overall mechanical parameters are determined by the internal soil mixture, including the percentage of fibre reinforcement. Despite its relative simplicity, the model is capable of well predicting ballistic test results currently available in literature for Adobe, including the data of an experimental campaign recently performed by the authors on real Adobe walls in the field.

Simulations of the effects of density and temperature profile on SMBI penetration depth based on the HL-2A tokamak configuration

Using the trans-neut module of the BOUT＋＋ code, we study how the fueling penetration depth of supersonic molecular beam injection（SMBI） is affected by plasma density and temperature profiles. The plasma densities and temperatures in L-mode are initialized to be a set of linear profiles with different core plasma densities and temperatures. The plasma profiles are relaxed to a set of steady states with different core plasma densities or temperatures. For a fixed gradient, the steady profiles are characterized by the core plasma density and temperature. The SMBI is investigated based on the final steady profiles with different core plasma densities or temperatures. The simulated results suggest that the SMB injection will be blocked by dense core plasma and high-temperature plasma. Once the core plasma density is set to be N（i0）= 1.4N0（N0= 1 × 10^19m^-3） it produces a deeper penetration depth. When N（i0） is increased from 1.4N0 to 3.9N0 at intervals of 0.8N0, keeping a constant core temperature of T（e0）= 725 eV at the radial position of ψ = 0.65, the penetration depth gradually decreases. Meanwhile, when the density is fixed at N（i0）= 1.4N0 and the core plasma temperature T（e0） is set to 365 eV,the penetration depth increases. The penetration depth decreases as T（e0） is increased from 365 eV to 2759 eV. Sufficiently large N（i0） or T（e0） causes most of the injected molecules to stay in the scrape-off-layer（SOL） region, lowering the fueling efficiency.

RELATIONSHIP BETWEEN PLASMA OPTIC SIGNAL AND PENETRATION DEPTH FOR PARTIAL-PENETRATION LASER WELDING

Through sampling and analyzing of plasma optic signals of 400-600 nm emitted from partial-penetration laser welding processes, how the penetration depth is related to the welding parameter and the plasma optic signal is studied, Under the experimental conditions, the plasma optic signal has good response to variety of the weld penetration, and the signal＇s RMS value increases with the penetration in a quadratic curve mode. The inherent relation between the plasma optic signal and the penetration depth is also analyzed. It is also found that, between the two common parameters of laser power and welding speed, laser power has more influence on penetration while welding speed has more influence on weld width. The research results provide theoretic and practical bases for penetration real-time monitoring or predicting in partial-penetration laser welding,

Photon penetration depth in human brain for light stimulation and treatment:A realistic Monte Carlo simulation study

Light has been clinically utilized as a stimulation in medical treatment,such as Low-level laser therapy and photodynamic thenapy,which has been more and more widely accepted in public.The penetration depth of the treatment light is important for precision treatment and safety control.The isue of light penetration has been highlighted in biomedical optics field for decades.However,quantitative research is sparse and even there are conflicts of view on the capability of near-infrared light penet ration into brain tissue.This study attempts to quantitatively revisit this issue by innovative high-realistic 3D Monte Caro modeling of stimulated light penetnation within high precision Visible Chinese human head.The properties of light,such as its wave-length,ilumination profle and size are concern in this study.We made stra ightforward and quantitative comparisons among the ffects by the light properties(i.e.,wavelengths:660,810 and 980 nn;beam types:Gaussi an and flat beamn;bear dianeters:0,2,4 and 6 cm)which are in the range of light treatment.The findings include about 3%of light dosage within brain tisue;the combination of Gaussian beam and 810nm light make the max imum light penetration(>5cm),which allows light to cross through gray matter into white mater.This study offered us,the first time as we know,quantitative guide for light stimulation parameter optimization in medical treatment.

Clinical significance of type V_I pit pattern subclassification in determining the depth of invasion of colorectal neoplasms

AIM: To clarify whether subclassification of the type VI pit pattern on the basis of magnifying colonoscopy findings is useful in determining the type and depth of invasion of colorectal neoplasms.METHODS: We retrospectively analyzed 272 colorectal neoplasms (117 dysplasias and 155 submucosal invasive carcinomas; 228 patients) with a type V pit pattern [type VI, n = 202; type VN, n = 70 (Kudo and Tsuruta classification system)]. We divided lesions with a type VI pit pattern into two subclasses, mildly irregular lesions and severely irregular lesions, according to the prominent and detailed magnifying colonoscopy findings. We examined the relation between these two subclasses and histology/invasion depth.RESULTS: One hundred and four lesions (51.5%) were judged to be mildly irregular, and 98 lesions (48.5%) were judged to be severely irregular. Ninety-seven (93.3%) mildly irregular lesions showed dysplasias or submucosal invasion of less than 1000 μm (SM < 1000 μm). Fifty-five (56.1%) severely irregular lesions showed submucosal invasion equal to or deeper than 1000 μm (SM ≥ 1000 μm). Mild irregularity was found significantly more often in dysplasias or lesions with SM < 1000 μm than in lesions with SM ≥ 1000 μm (P < 0.01).CONCLUSION: Subclassification of the type VI pit pattern is useful for identifying dysplasias or lesions with SM < 1000 μm.

A STUDY ON PENETRATION DEPTH OF POLARIZATION IMAGING

Optical clearing improves the penetration depth of optical measurements in turbid tissues.Polarization imaging has been demonstrated as a potentially promising tool for detecting cancers in superficial tissues,but its limited depth of detection is a major obstacle to the effective application in clinical diagnosis.In the present paper,detection depths of two polarization imaging methods,i.e.,rotating linear polarization imaging(RLPI)and degree of polarization imaging(DOPI),are examined quantitatively using both experiments and Monte Carlo simulations.The results show that the contrast curves of RLPI and DOPI are different.The characteristic depth of DOPI scales with transport mean free path length,and that of RLPI increases slightly with g.Both characteristic depths of RLPI and DOPI are on the order of transport mean free path length and the former is almost twice as large as the latter.It is expected that they should have different response to optical clearing process in tissues.

Effect of process parameters on depth of penetration and topography of AZ91 magnesium alloy in abrasive water jet cutting

In the present study,the influence of dynamic process parameters such as water pressure,traverse speed and abrasive mass flow rate on depth of penetration and surface topography in high strength AZ91 magnesium alloy were investigated using Abrasive Water Jet(AWJ)cutting technology.Process parameters were varied at 3 levels and influences of each parameter on penetration ability were identified using analysis of variance(ANOVA).Contribution of water pressure and traverse speed on jet penetration found higher compared to abrasive mass flow rate.Profile projector was used to measure depth of penetration.Microstructural features and topography of cut surfaces were examined using Scanning Electron Microscopy(SEM).Micro cutting and ploughing were observed on the top and bottom portion of the cut which were similar to that of modes of deformation in other ductile materials like aluminium and steel.Surface roughness of cut surfaces was measured using Taylor Hobson surface roughness tester.Surface roughness found higher at higher traverse speeds and lower at lower traverse speeds.This study also highlights the suitability of AWJ cutting technology for cutting magnesium and its alloys.

Penetration depth for yaw-inducing bursting layer impacted by projectile

In order to accurately estimate the anti-penetration capacity of yaw-inducing bursting layer with irregular barriers on surface impacted by projectile,the theoretical model of attack angle and angular velocity for projectile impacting on irregular barrier was achieved according to the macroscopic relation of contact force versus contact time,in which the main factors such as the relative geometrical characteristics of projectile and irregular barrier,material property and impact velocity of projectile influencing on yaw-inducing effectiveness were considered.On the basis of considering synthetically the influences of attack angle,impact velocity,impact angle of projectile and uncontrolled free surface of target,the theoretical formulation of penetration depth for bursting layer with irregular barriers on surface impacted by projectile was presented by expressing the stress of an optional point on the nose of projectile according to the relation of stress versus velocity.The theoretical results indicate that in the case of oblique impact embodying effect of attack angle,the penetration depth is reduced with the increase of impact angle,attack angle or angular velocity,and penetration trajectory is also deflected obviously.The effectiveness of angular velocity influencing on penetration depth is increased with impact velocity increasing.The theoretical results are in good agreement with test data for low impact velocity.

Spatial distribution of penetration depth in Taihu Lake (China) during spring and autumn

In the context of remote sensing, sunlight penetration depth is the depth above which 90% of the diffusely reflected irradiance from a water body surface originates. Model algorithms to simulate water quality variables such as chlorophyll a, dissolved organic matter, suspended matter, and Secchi depth are sensitive to the variations of this variable. The penetration depth for Taihu Lake in China, a shallow and turbid lake, was calculated by using a multiple scattering model, and in situ optical measurements were carried out during May and October 2010. The results show that:1) the penetration depth generally increased from west to east during spring and from southeast to northwest during autumn, reflecting the prevailing wind direction and; 2) there was strong dependence of the penetration depth on the concentration of suspended matter.

Penetration depth and concentration distribution for implanted heavy ions with low energies in plant seeds by SEM and EDS

The penetration depth and concentration distribution of implanted ions have been studied for low energy heavy ions implanted in the dry seeds of plant, such as peanut, mung beau, sunflower, wheat and radish seeds, etc. by SEM+EDS. The results .how that the maximum penetration depth is about 12μm for V+ with an energy 200 keV implanted in cotyledon of the peanut, 18pm, spin, 20μm for V2+ with 90 keV implanted in sunflower, wheat, radish seeds, respectively. The penetration depth of implanted Cu2+ with 80 keV is about 90μm in the remainder funicle derivative of the mung beau seeds. The experimental result of the maximum penetration depth of implanted V+ in the peanut seeds was compared with the calculated value of the TRIM95.

Comparison Among Depths of Penetration of Different Targets Subjected to Rigid Projectile Impact

The ratios of depth of penetration (DOP) of different targets under the same penetration condition was investigated according to the dimensionless formula of DOP of different targets penetrated by a non-deformable projectile.Results show that various targets may be equivalent to each other.The applicable range of the equivalence and the feasibility of targets substitution were discussed by integrating the available test data.

Round robin using the depth of penetration test method on an armour grade alumina

The depth of penetration(DOP)method is a well-known ballistic test method for characterisation and ranking of ceramic armour materials.The ceramic tile is bonded to a backing material of semi-infinite thickness,and the penetration depth of the projectile gives a measure of the performance of the ceramic.There is,however,an inherent variability in the results from this test method.In this work,the accuracy and the variability of the DOP method has been investigated in a round robin exercise.Six ballistic test centres took part in the exercise.A test protocol was developed,in which the threat type(projectile and impact conditions)and a procedure on how to prepare the targets were specified.The targets consisted of alumina tiles of two different thicknesses that were bonded to polycarbonate backing cubes.Two different 7.62 mm armour piercing projectiles were employed;one with a hard steel core and one with a tungsten carbide core.The projectiles and the other materials all came from single material batches in order to avoid batch-to-batch variations in material properties.These materials were distributed between the ballistic test centres.The test results of the different ballistic test facilities were collected and compared.There was not a lot of variation between the average DOP values obtained at each laboratory,but the variation in penetration depth between shots was high.The consequence of this variation may be less confidence in the test results,and a statistical method was used to evaluate the required number of tests that are sufficient to obtain an average result with high confidence.In most cases,the required number of tests is much higher than what is practically feasible.This work was conducted as part of the European Defence Agency-project CERAMBALL.

Fuzzy neural networks for control of penetration depthduring GTAW

An intelligent system including both a neural network(NN) and a self adjusting fuzzy controller(FC) for modeling and control of the penetration depth during gas tungsten arc welding(GTAW) process is presented in this paper. The discussion is mainly focused on two parts. One is the modeling of the penetration depth with NN. A visual sensor CCD is used to obtain the image of the molten pool. A neural network model is established to estimate the penetration depth from the welding current, pool width and seam gap. It is demonstrated that the proposed neural network can produce highly complex nonlinear multi variable model of the GTAW process that offer the accurate prediction of welding penetration depth. Another is the control for the penetration depth with FC.A self adjusting fuzzy controller is proposed,which used for controlling the penetration depth.The control parameters are adjusted on line automatically according to the controlling errors of penetration and the errors can be decreased sharply. The effectiveness of the proposed intelligent methods is demonstrated by the real experiments and the improved performance results are obtained.

The integrated intelligent system for welding seam error and penetration depth identification

A integrated intelligent system for seam tracking and penetration control is given. The system received information of welding seam error and penetration depth from only one sensor, then, it realized seam tracking and penetration control simultaneously. This paper introduces constitution of the system, methods of information recognition, design of the neural fuzzy controller and results practically.

Analysis of Penetration Depth of Pipeline on Cohesive Soil Seabed

This paper conducts laboratory tests to investigate detailedly the soil deformation law around the pipeline and its penetration depth under self-gravity. The seabed model is prepared by consolidating saturated soil using vacuum pressure technology, and the pipeline models are specifically designed to possess different radii. Based on the experimental results and digital images, the soil deformation process is analyzed and summarized, a kinematic admissible velocity field is given and an upper bound solution of pipeline penetration depth and soil reaction force is derived and proposed in this paper. In order to verify the accuracy of the upper bound solution deduced in this paper,a comparison is made among some published results and the solution suggested in this paper, the comparison results confirm that the upper bound solution and the soil failure mode are reasonable. Finally two empirical formulas are given in this paper to estimate the soil reaction force of seabed and the penetration depth of pipeline. The empirical formulas are in agreement with the upper bound solution derived in this paper, and the conclusion of this paper could provide some theoretical reference for the further study of the interaction between the pipeline and the soil.