Machine Learning-based Inverse Model for Few-Mode Fiber Designs

The medium for next-generation communication is considered as fiber for fast,secure communication and switching capability.Mode division and space division multiplexing provide an excellent switching capability with high data transmission rate.In this work,the authors have approached an inverse modeling technique using regression-based machine learning to design a weakly coupled few-mode fiber for facilitating mode division multiplexing.The technique is adapted to predict the accurate profile parameters for the proposed few-mode fiber to obtain the maximum number of modes.It is for a three-ring-core few-mode fiber for guiding five,ten,fifteen,and twenty modes.Three types of regression models namely ordinary least-square linear multi-output regression,k-nearest neighbors of multi-output regression,and ID3 algorithm-based decision trees for multi-output regression are used for predicting the multiple profile parameters.It is observed that the ID3-based decision tree for multioutput regression is the robust,highly-accurate machine learning model for fast modeling of FMFs.The proposed fiber claims to be an efficient candidate for the next-generation 5G and 6G backhaul networks using mode division multiplexing.

Nonlinear inverse modeling of sensor based on back-propagation fuzzy logical system

Objective To correct the nonlinear error of sensor output,a new approach to sensor inverse modeling based on Back-Propagation Fuzzy Logical System(BP FS) is presented.Methods The BP FS is a computationally efficient nonlinear universal approximator,which is capable of implementing complex nonlinear mapping from its input pattern space to the output with fast convergence speed.Results The neuro-fuzzy hybrid system,i.e.BP FS,is then applied to construct nonlinear inverse model of pressure sensor.The experimental results show that the proposed inverse modeling method automatically compensates the associated nonlinear error in pressure estimation,and thus the performance of pressure sensor is significantly improved.Conclusion The proposed method can be widely used in nonlinearity correction of various kinds of sensors to compensate the effects of nonlinearity and temperature on sensor output.

Similarity measure of sedimentary successions and its application in inverse stratigraphic modeling

This paper presents a unique and formal method of quantifying the similarity or distance between sedimentary facies successions from measured sections in outcrop or drilled wells and demonstrates its first application in inverse stratigraphic modeling. A sedimentary facies succession is represented with a string of symbols, or facies codes in its natural vertical order, in which each symbol brings with it one attribute such as thickness for the facies. These strings are called attributed strings. A similarity measure is defined between the attributed strings based on a syntactic pattern-recognition technique. A dynamic programming algorithm is used to calculate the similarity. Inverse stratigraphic modeling aims to generate quantitative 3D facies models based on forward stratigraphic modeling that honors observed datasets. One of the key techniques in inverse stratigraphic modeling is how to quantify the similarity or distance between simulated and observed sedimentary facies successions at data locations in order for the forward model to condition the simulation results to the observed dataset such as measured sections or drilled wells. This quantification technique comparing sedimentary successions is demonstrated in the form of a cost function based on the defined distance in our inverse stratigraphic modeling implemented with forward modeling optimization.

Retrieval of leaf biochemical properties by inversed PROSPECT model and hyperspectral indices:an application to Populus euphratica polymorphic leaves

Leaf biochemical properties have been widely assessed using hyperspectral reflectance information by inversion of PROSPECT model or by using hyperspectral indices, but few studies have focused on arid ecosystems. As a dominant species of riparian ecosystems in arid lands, Populus euphratica Oliv. is an unusual tree species with polymorphic leaves along the vertical profile of canopy corresponding to different growth stages. In this study, we evaluated both the inversed PROSPECT model and hyperspectral indices for estimating biochemical properties of P. euphratica leaves. Both the shapes and biochemical properties of P. euphratica leaves were found to change with the heights from ground surface. The results indicated that the model inversion calibrated for each leaf shape performed much better than the model calibrated for all leaf shapes, and also better than hyperspectral indices. Similar results were obtained for estimations of equivalent water thickness （EWT） and leaf mass per area （LMA）. Hyperspectral indices identified in this study for estimating these leaf properties had root mean square error （RMSE） and R2 values between those obtained with the two calibration strategies using the inversed PROSPECT model. Hence, the inversed PROSPECT model can be applied to estimate leaf biochemical properties in arid ecosystems, but the calibration to the model requires special attention.

Inverse Calculation of Wave-Absorbing Structure Dimensions Based on Extended ANFIS Model

A new wave energy dissipation structure is proposed, aiming to optimize the dimensions of the structure and make the reflection of the structure maintain a low level within the scope of the known frequency band. An optimal extended ANFIS model combined with the wave reflection coefficient analysis for the estimation of the structure dimensions is established. In the premise of lower wave reflection coefficient, the specific sizes of the structure are obtained inversely, and the contribution of each related parameter on the structural reflection performance is analyzed. The main influencing factors are determined. It is found that the optimal dimensions of the proposed structure exist, which make the wave absorbing performance of the structure reach a perfect status under a wide wave frequency band.

Model fitting of the seasonal population dynamics of the soybean aphid, Aphis glycines Matsumura, in the field

The soybean aphid, Aphis glycines Matsumura(Hemiptera: Aphididae), is one of the greatest threats to soybean production, and both trend analysis and periodic analysis of its population dynamics are important for integrated pest management(IPM). Based on systematically investigating soybean aphid populations in the field from 2018 to 2020, this study adopted the inverse logistic model for the first time, and combined it with the classical logistic model to describe the changes in seasonal population abundance from colonization to extinction in the field. Then, the increasing and decreasing phases of the population fluctuation were divided by calculating the inflection points of the models, which exhibited distinct seasonal trends of the soybean aphid populations in each year. In addition, multifactor logistic models were then established for the first time, in which the abundance of soybean aphids in the field changed with time and relevant environmental conditions. This model enabled the prediction of instantaneous aphid abundance at a given time based on relevant meteorological data. Taken as a whole, the successful approaches implemented in this study could be used to build a theoretical framework for practical IPM strategies for controlling soybean aphids.

Inverse Learning Control of Nonlinear Systems Using Support Vector Machines

An inverse learning control scheme using the support vector machine (SVM) for regression was proposed. The inverse learning approach is originally researched in the neural networks. Compared with neural networks, SVMs overcome the problems of local minimum and curse of dimensionality. Additionally, the good generalization performance of SVMs increases the robustness of control system. The method of designing SVM inverse learning controller was presented. The proposed method is demonstrated on tracking problems and the performance is satisfactory.

Model predictive inverse method for recovering boundary conditions of two-dimensional ablation

A model predictive inverse method (MPIM) is presented to estimate the time- and space-dependent heat flux onthe ablated boundary and the ablation velocity of the two-dimensional ablation system. For the method, first of all, therelationship between the heat flux and the temperatures of the measurement points inside the ablation material is establishedby the predictive model based on an influence relationship matrix. Meanwhile, the estimation task is formulated as aninverse heat transfer problem (IHTP) with consideration of ablation, which is described by an objective function of thetemperatures at the measurement point. Then, the rolling optimization is used to solve the IHTP to online estimate theunknown heat flux on the ablated boundary. Furthermore, the movement law of the ablated boundary is reconstructedaccording to the estimation of the boundary heat flux. The effects of the temperature measurement errors, the numberof future time steps, and the arrangement of the measurement points on the estimation results are analyzed in numericalexperiments. On the basis of the numerical results, the effectiveness of the presented method is clarified.

Nonlinear direct data-driven control for UAV formation flight system

This paper proposes the nonlinear direct data-driven control from theoretical analysis and practical engineering,i.e.,unmanned aerial vehicle(UAV)formation flight system.Firstly,from the theoretical point of view,consider one nonlinear closedloop system with a nonlinear plant and nonlinear feed-forward controller simultaneously.To avoid the complex identification process for that nonlinear plant,a nonlinear direct data-driven control strategy is proposed to design that nonlinear feed-forward controller only through the input-output measured data sequence directly,whose detailed explicit forms are model inverse method and approximated analysis method.Secondly,from the practical point of view,after reviewing the UAV formation flight system,nonlinear direct data-driven control is applied in designing the formation controller,so that the followers can track the leader’s desired trajectory during one small time instant only through solving one data fitting problem.Since most natural phenomena have nonlinear properties,the direct method must be the better one.Corresponding system identification and control algorithms are required to be proposed for those nonlinear systems,and the direct nonlinear controller design is the purpose of this paper.

Dynamic ocean inverse modeling based on differentiable rendering

Learning and inferring underlying motion patterns of captured 2D scenes and then re-creating dynamic evolution consistent with the real-world natural phenomena have high appeal for graphics and animation.To bridge the technical gap between virtual and real environments,we focus on the inverse modeling and reconstruction of visually consistent and property-verifiable oceans,taking advantage of deep learning and differentiable physics to learn geometry and constitute waves in a self-supervised manner.First,we infer hierarchical geometry using two networks,which are optimized via the differentiable renderer.We extract wave components from the sequence of inferred geometry through a network equipped with a differentiable ocean model.Then,ocean dynamics can be evolved using the reconstructed wave components.Through extensive experiments,we verify that our new method yields satisfactory results for both geometry reconstruction and wave estimation.Moreover,the new framework has the inverse modeling potential to facilitate a host of graphics applications,such as the rapid production of physically accurate scene animation and editing guided by real ocean scenes.

Improving the Accuracy of Vegetation Index Retrieval for Biomass by Combining Ground-UAV Hyperspectral Data-A New Method for Inner Mongolia Typical Grasslands

Grassland biomass is an important parameter of grassland ecosystems.The complexity of the grassland canopy vegetation spectrum makes the long-term assessment of grassland growth a challenge.Few studies have explored the original spectral information of typical grasslands in Inner Mongolia and examined the influence of spectral information on aboveground biomass(AGB)estimation.In order to improve the accuracy of vegetation index inversion of grassland AGB,this study combined ground and Unmanned Aerial Vehicle(UAV)remote sensing technology and screened sensitive bands through ground hyperspectral data transformation and correlation analysis.The narrow band vegetation indices were calculated,and ground and airborne hyperspectral inversion models were established.Finally,the accuracy of the model was verified.The results showed that:(1)The vegetation indices constructed based on the ASD FieldSpec 4 and the UAV were significantly correlated with the dry and fresh weight of AGB.(2)The comparison between measured R^(2) with the prediction R^(2) indicated that the accuracy of the model was the best when using the Soil-Adjusted Vegetation Index(SAVI)as the independent variable in the analysis of AGB(fresh weight/dry weight)and four narrow-band vegetation indices.The SAVI vegetation index showed better applicability for biomass monitoring in typical grassland areas of Inner Mongolia.(3)The obtained ground and airborne hyperspectral data with the optimal vegetation index suggested that the dry weight of AGB has the best fitting effect with airborne hyperspectral data,where y=17.962e^(4.672x),the fitting R^(2) was 0.542,the prediction R^(2)was 0.424,and RMSE and REE were 57.03 and 0.65,respectively.Therefore,established vegetation indices by screening sensitive bands through hyperspectral feature analysis can significantly improve the inversion accuracy of typical grassland biomass in Inner Mongolia.Compared with ground monitoring,airborne hyperspectral monitoring better reflects the inversion of actual surface biomass.It provides a reliable modeling framework for grassland AGB monitoring and scientific and technological support for grazing management.

A Hybrid Compensation Scheme for the Input Rate-Dependent Hysteresis of the Piezoelectric Ceramic Actuators

A hybrid compensation scheme for piezoelectric ceramic actuators(PEAs)is proposed.In the hybrid compensation scheme,the input rate-dependent hysteresis characteristics of the PEAs are compensated.The feedforward controller is a novel input rate-dependent neural network hysteresis inverse model,while the feedback controller is a proportion integration differentiation(PID)controller.In the proposed inverse model,an input ratedependent auxiliary inverse operator(RAIO)and output of the hysteresis construct the expanded input space(EIS)of the inverse model which transforms the hysteresis inverse with multi-valued mapping into single-valued mapping,and the wiping-out,rate-dependent and continuous properties of the RAIO are analyzed in theories.Based on the EIS method,a hysteresis neural network inverse model,namely the dynamic back propagation neural network(DBPNN)model,is established.Moreover,a hybrid compensation scheme for the PEAs is designed to compensate for the hysteresis.Finally,the proposed method,the conventional PID controller and the hybrid controller with the modified input rate-dependent Prandtl-Ishlinskii(MRPI)model are all applied in the experimental platform.Experimental results show that the proposed method has obvious superiorities in the performance of the system.

Experimental Research on Quantitative Inversion Models of Suspended Sediment Concentration Using Remote Sensing Technology

Research on quantitative models of suspended sediment concentration （SSC） using remote sensing technology is very important to understand the scouting and siltation variation in harbors and water channels. Based onlaboratory study of the relationship between different suspended sediment concentrations and reflectance spectra measured synchronously, quantitative inversion models of SSC based on single factor, band ratio and sediment parameter were developed, which provides an effective method to retrieve the SSC from satellite images. Results show that the bl （430-500nm） and b3 （670-735nm） are the optimal wavelengths for the estimation of lower SSC and the b4 （780-835nm） is the optimal wavelength to estimate the higher SSC. Furthermore the band ratio B2/B3 can be used to simulate the variation of lower SSC better and the B4/B1 to estimate the higher SSC accurately. Also the inversion models developed by sediment parameters of higher and lower SSCs can get a relatively higher accuracy than the single factor and band ratio models.

Seismic traveltime inversion of 3D velocity model with triangulated interfaces

Seismic traveltime tomographic inversion has played an important role in detecting the internal structure of the solid earth. We use a set of blocks to approximate geologically complex media that cannot be well described by layered models or cells. The geological body is described as an aggregate of arbitrarily shaped blocks,which are separated by triangulated interfaces. We can describe the media as homogenous or heterogeneous in each block. We define the velocities at the given rectangle grid points for each block,and the heterogeneous velocities in each block can be calculated by a linear interpolation algorithm. The parameters of the velocity grid positions are independent of the model parameterization,which is advantageous in the joint inversion of the velocities and the node depths of an interface. We implement a segmentally iterative ray tracer to calculate traveltimes in the 3D heterogeneous block models.The damped least squares method is employed in seismic traveltime inversion,which includes the partial derivatives of traveltime with respect to the depths of nodes in the triangulated interfaces and velocities defined in rectangular grids. The numerical tests indicate that the node depths of a triangulated interface and homogeneous velocity distributions can be well inverted in a stratified model.

A case study of the consistency problem in the inverse estimation

Inverse technique is a widely used method in oceanography, but it has a problem that the retrieved solutions often violate model prior assumptions. To tune the model has consistent solutions, an iteration approach, which successively utilizes the posterior statistics for next round inverse estimation, is introduced and tested from a real case study. It is found that the consistency may become elusive as the determinants of solution and noise covariance matrices become zero in the iteration process. However, after several steps of such operation, the difference between posterior statistics and the model prior ones can be gradually reduced.

Predictive Inverse Neurocontrol:an experimental case study

To increase predictive behaviors of neural network dynamic model, an experimental case study of a new approach to systems controller design is presented. The experiment is based on neural networks inverse plant model. Special rules for network training are developed. Such system is close to model-based predictive control, but needs much less computational resources. The approach advantages are shown by the control of laboratory complex plants.

Geochemical Modeling and Statistical Analysis for Groundwater Evolution Assessment in Wadi Qasab, Sohag, Eastern Desert, Egypt

Qasab basin is one of the most promising areas for the sustainable development in the Eastern Desert fringes of the Nile Valley, Egypt. The integration between statistical analysis, stable isotopes as well as geochemical modeling tools delineated the geochemical possesses affecting groundwater quality and detected the main recharge source in Qasab basin. The most of groundwater samples are brackish (88%), while the minority (12%) of the samples are fresh. The electrical conductivity of groundwater ranged from 1135 to 10,030 μS/cm. The statistical analysis and hydrochemical diagrams suggest that the groundwater quality is mainly controlled by several intermixed processes (rock weathering and agricultural activities). The mineralization of the Pleistocene groundwater is regulated by the rock weathering source, evaporation processes and reverse cation exchange. The isotopic signatures (δ2H and δ18O) represent two groundwater groups. The first group, is enriched with the isotopic signature of δ18O, which ranges from 0.9‰ to 5.5‰. This group is mostly affected by the recent meteoric recharge from the surface water leakage. The second group, is relatively depleted with the isotopic signature of δ18O, reflecting a palaeo recharge source of colder climate. The δ18O‰ varies from -10.1‰ to -6.4‰, indicating upward leakage of the Nubian sandstone aquifer through deep seated faults. The inverse geochemical model reflects that the salinity source of the groundwater samples is due to the leaching and dissolution processes of carbonate, sulphate and chloride minerals from the aquifer matrix. This study can demonstrate the hydrochemistry assessment guide to support sustainable development in Qasab basin to ensure that adequate groundwater management can play to reduce poverty and support socioeconomic development.

Estimation of the water–oil–gas relative permeability curve from immiscible WAG coreflood experiments using the cubic B-spline model

Immiscible water-alternating-gas（WAG） flooding is an EOR technique that has proven successful for water drive reservoirs due to its ability to improve displacement and sweep efficiency.Nevertheless,considering the complicated phase behavior and various multiphase flow characteristics,gas tends to break through early in production wells in heterogeneous formations because of overriding,fingering,and channeling,which may result in unfavorable recovery performance.On the basis of phase behavior studies,minimum miscibility pressure measurements,and immiscible WAG coreflood experiments,the cubic B-spline model（CBM） was employed to describe the three-phase relative permeability curve.Using the Levenberg-Marquardt algorithm to adjust the vector of unknown model parameters of the CBM sequentially,optimization of production performance including pressure drop,water cut,and the cumulative gas-oil ratio was performed.A novel numerical inversion method was established for estimation of the water-oil-gas relative permeability curve during the immiscible WAG process.Based on the quantitative characterization of major recovery mechanisms,the proposed method was validated by interpreting coreflood data of the immiscible WAG experiment.The proposed method is reliable and can meet engineering requirements.It provides a basic calculation theory for implicit estimation of oil-water-gas relative permeability curve.

Genetic Algorithm-Based Estimation of Nonlinear Transducer

This paper describes an innovative, genetic algorithm based inverse model of nonlinear transducer. In the inverse modeling, using a genetic algorithm, the unknown coefficients of the model are estimated accurately. The simulation results indicate that this technique provides greater flexibility and suitability than the existing methods. It is very easy to modify the nonlinear transducer on line. Thus the method improves the transducer's accuracy. With the help of genetic algorithm (GA), the model coefficients' training are less likely to be trapped in local minima than traditional gradient based search algorithms.

Estimating emissions of HCFC-22 and CFC-11 in China by atmospheric observations and inverse modeling

This paper presents the estimation of Chinese emissions of HCFC-22 and CFC-11 in 2009 by an inverse modeling method based on in-situ measurement data from the Shangdianzi Global Atmosphere Watch (GAW) Regional Station (SDZ) and atmospheric transport simulations. After inversion (a-posteriori) estimates of the Chinese emissions in 2009 increased by 6.6% for HCFC-22 from 91.7 (± 83.6) to 98.3 (± 47.4) kt/yr and by 22.5% for CFC-11 from 13 (±12.6) to 15.8 (±7.2) kt/yr compared to an a-priori emission. While the model simulation with a-priori emissions already captured the main features of the observed variability at the measurement site, the model performance (in terms of correlation and mean-square-error) improved using a-posteriori emissions. The inversion reduced the root-mean-square (RMS) error by 4% and 10% for HCFC-22 and CFC-11, respectively.