Comparison of conventional and inverted structures in fullerene-free organic solar cells

A n-type small molecule DC-IDT2E with 4,4,9,9-tetrakis（4-hexylphenyl）-indaceno[1,2-b：5,6-bt]dithiophene as a central building block, furan as rr-bridges, and 1,1 -dicyanomethylene-3-indanone as end acceptor groups, was synthesized and used as an electron acceptor in solution-processed organic solar cells （OSCs）. DC-IDT2F exhibited good thermal stability, broad and strong absorption in 500-850 rim, a narrow bandgap of 1.54 eV, LUMO of-3.88 eV, HOMO of-5.44 eV and an electron mobility of 6.5 × 10-4 cm2/（V.s）. DC-IDT2F-based OSCs with conventional and inverted structures exhibited power conversion efficiencies of 2.26 and 3.08% respec- tively. The effect of vertical phase separation and morphology of the active layer on the device performance in the two structures was studied.

High frequency doubling efficiency THz GaAs Schottky barrier diode based on inverted trapezoidal epitaxial cross-section structure

A high-performance terahertz Schottky barrier diode(SBD)with an inverted trapezoidal epitaxial cross-sectional structure featuring high varactor characteristics and reverse breakdown characteristics is reported in this paper.Inductively coupled plasma dry etching and dissolution wet etching are used to define the profile of the epitaxial layer,by which the voltage-dependent variation trend of the thickness of the metal-semiconductor contact depletion layer is modified.The simulation of the inverted trapezoidal epitaxial cross-section SBD is also conducted to explain the physical mechanism of the electric field and space charge region area.Compared with the normal structure,the grading coefficient M increases from 0.47 to 0.52,and the capacitance modulation ratio(C^(max)/C_(min))increases from 6.70 to 7.61.The inverted trapezoidal epitaxial cross-section structure is a promising approach to improve the variable-capacity ratio by eliminating the accumulation of charge at the Schottky electrode edge.A 190 GHz frequency doubler based on the inverted trapezoidal epitaxial cross-section SBD also shows a doubling efficiency of 35%compared to that 30%of a normal SBD.

Enhancing performance of inverted quantum-dot light-emitting diodes based on a solution-processed hole transport layer via ligand treatment

The performance of inverted quantum-dot light-emitting diodes(QLEDs)based on solution-processed hole transport layers(HTLs)has been limited by the solvent-induced damage to the quantum dot(QD)layer during the spin-coating of the HTL.The lack of compatibility between the HTL’s solvent and the QD layer results in an uneven surface,which negatively impacts the overall device performance.In this work,we develop a novel method to solve this problem by modifying the QD film with 1,8-diaminooctane to improve the resistance of the QD layer for the HTL’s solvent.The uniform QD layer leads the inverted red QLED device to achieve a low turn-on voltage of 1.8 V,a high maximum luminance of 105500 cd/m2,and a remarkable maximum external quantum efficiency of 13.34%.This approach releases the considerable potential of HTL materials selection and offers a promising avenue for the development of high-performance inverted QLEDs.

Non-Fullerene-Based Inverted Organic Photovoltaic Device with Long-Term Stability

In this work,we developed the PM6:Y6-based inverted structure organic photovoltaic(i-OPV)with improved power conversion efficiency(PCE)and long-term stability by resolving the origins of the performance deterioration.The deep defects between the metal oxide-based electron transport layer and bulk-heterojunction photoactive layer interface were responsible for suboptimal PCE and facilitated degradation of devices.While the density of deep traps is increased during the storage of i-OPV,the penetrative oxygen-containing defects additionally generated shallow traps below the band-edge of Y6,causing an additional loss in the open-circuit voltage.The suppression of interfacial defects by chemical modification effectively improved the PCE and long-term stability of i-OPV.The modified i-OPV(mi-OPV)achieved a PCE of 17.42%,which is the highest value among the reported PM6:Y6-based i-OPV devices.Moreover,long-term stability was significantly improved:~90%and~80%retention of its initial PCE after 1200 h of air storage and illumination,respectively.

Exploration discovery and hydrocarbon accumulation characteristics of the Doseo strike-slip and inverted basin, Chad

Several international oil companies had conducted petroleum exploration, but failed to make any commercially viable discoveries in the Doseo Basin for over 30 years. In this article, an integrated analysis, based on the latest seismic and drilling data combined with exploration practice and tectonic, sedimentary as well as petroleum-geological characteristics of the basin, has been conducted with the aim to disclose the key factors of hydrocarbon accumulation and enrichment and then to find the potential petroleum plays. The Doseo Basin in Chad is a Meso-Cenozoic lacustrine rift basin developed on the Precambrian crystalline basement in the Central African Shear Zone. It is a half graben rift controlled by the strike-slip fault at the northern boundary, and can be divided into two sub-basins, an uplift and a slope. The basin experienced two rifting periods in the Cretaceous and was strongly inverted with the erosion thickness of 800–1000 m during the Eocene, and then entered the depression and extinction period. Structurally, a large number of normal faults and strike-slip faults are identified in the basin, and the boundary faults are inverted faults with normal at first. The main structural styles include inverted anticlines, fault noses, complex fault-blocks and flower structures. The Lower Cretaceous is the main sedimentary strata, which are divided into the Mangara Group, Kedeni, Doba and Koumra Formations from bottom to up. Two transgressive-regressive cycles developed in the Lower Cretaceous indicates with mainly lacustrine, fluvial, delta, braided-delta, fan-delta sandstone and mudstone. The effective source rock in the basin is the deep-lacustrine mudstone of the Lower Cretaceous containing the type Ⅰ and type Ⅱ;organic matters. Furthermore, Inverted anticlines and fault-complicated blocks comprise the main trap types and the Kedeni Uplift is the most favorable play, followed by the Northern Steep Slope and Southern Gentle Slope. Lateral sealing capacity of faults controls the hydrocarbon abundance.

MoO_3/Ag/Al/ZnO intermediate layer for inverted tandem polymer solar cells

We report an MoO3/Ag/Al/ZnO intermediate layer connecting two identical bulk heterojunction subcells with a poly（3-hexylthiophene） and [6,6]-phenyl-C61-butyric acid methyl ester （P3HT and PCBM） active layer for inverted tan- dem polymer solar cells. The highly transparent intermediate layer with an optimized thickness realizes an Ohmic contact between the two subcells for effective charge extraction and recombination. A maximum power conversion efficiency of 3.76% is obtained for the tandem cell under 100 mW/cm2 illumination, which is larger than that of a single cell （3.15%）. The open-circuit voltage of the tandem cell （1.18 V） approaches double that of the single cell （0.61 V）.

Spatial configuration engineering of perylenediimide-based non-fullerene electron transport materials for efficient inverted perovskite solar cells

Due to their excellent photoelectron chemical properties and suitable energy level alignment with perovskite,perylene diimide(PDI)derivatives are competitive non-fullerene electron transport material(ETM)candidates for perovskite solar cells(PSCs).However,the conjugated rigid plane structure of PDI units result in PDI-based ETMs tending to form large aggregates,limiting their application and photovoltaic performance.In this study,to restrict aggregation and further enhance the photovoltaic performance of PDI-type ETMs,two PDI-based ETMs,termed PDO-PDI2(dimer)and PDO-PDI3(trimer),were constructed by introducing a phenothiazine 5,5-dioxide(PDO)core building block.The research manifests that the optoelectronic properties and film formation property of PDO-PDI2 and PDO-PDI3 were deeply affected by the molecular spatial configuration.Applied in PSCs,PDO-PDI3 with threedimensional spiral molecular structure,exhibits superior electron extraction and transport properties,further achieving the best PCE of 18.72%and maintaining 93%of its initial efficiency after a 720-h aging test under ambient conditions.

A vivid Au-porous anodic alumina composite film with the inverted taper structure for label-free detection

Localized surface plasmon resonance(LSPR)has been widely used in medical detection because of its time effectiveness,noninvasiveness,high sensitivity,and relatively simple fabrication process.Porous anodic alumina(PAA)can be regarded as a plasma substrate for label-free detection due to its unique two-dimensional structure.In this work,a vivid Au-PAA composite film with the inverted taper structure was developed by multi-step anodic oxidation and pore-widening processes followed by magnetron sputtering with Au nanoparticles(AuNPs).The highly saturated and bright structural color was generated by the synergistic effect of photonic and plasmonic modes.Interestingly,various Au-PAA composite films with structural colors altering from purple to red were obtained via adjusting the height/diameter ratio of PAA.Benefiting from the inverted taper structure,light trap characteristics were effectively enhanced by increasing the incident light and reducing the diffuse light.In addition,a finite difference time domain(FDTD)model was proposed to predict the relationship between the reflectance peak and the height of the composite film,and the simulated data were in good agreement with the experimental results.As a proof of concept,labelfree detections of various reagents(water,ethanol,glycol,glycerol,and glucose),the concentration of glucose(refractive index sensitivity of 376 nm/RIU,RIU:refractive index unit),and thrombin(detection limit of 0.1×10^(-7)mol/L)were realized by the Au-PAA composite film.This vivid Au-PAA composite film provides a very powerful tool for in-situ label-free bio-detection.

Optimizing structure for constructing a highly efficient inverted top-emitting organic light-emitting diode with stable electroluminescent spectra

We demonstrate a highly efficient inverted top-emitting organic light-emitting diode （TOLED） having stable electroluminescent spectra and color coordination with variation of viewing angles by simply tuning the reso- nance wavelength corresponding to the free emission of the emitter. Using a doped fluorescent emitting system, the inverted TOLED exhibits an enhanced maximum current efficiency of 19 cd/A and a power efficiency of 17 lm/W, which are much higher than those （11 cd/A and 5 lm/W） of the counterpart with normal structure, although both TOLEDs behave with similar stable electroluminescent spectra characteristics. The results indicate that we provide a simple and effective method of constructing an excellent inverted TOLED for potentially practical applications.

ITO surface modification for inverted organic photovoltaics

The work function （WF） of indium-tin-oxide （ITO） substrates plays an important role on the inverted organic photovoltaic device performance. And electrode engineering has been a useful method to facilitate carrier extraction or charge collection to enhance organic photovoltaic （OPV） performance. By using self-assembly technique, we have deposited poly（dimethyl diallylammonium chloride） （PDDA） layers onto ITO coated glass substrates. The results indicate that the surface WF of ITO is reduced by about 0.3 eV after PDDA modification, which is attributed to the modulation in electron affinity. In addition, the surface roughness of ITO substrate became smaller after PDDA modification. These modified ITO substrates can be applied to fabricate inverted OPVs, in which ITO works as the cathode to collect electrons. As a result, the photovoltaic performance of inverted OPV is substantially improved, mainly reflecting on the increase of short circuit current density.

Strong Connections and Invertible Weak Entwining Structures

In this paper we obtain a criterion under which the bijectivity of the canonical morphism of a weak Galois extension associated to a weak invertible entwining structure is equivalent to the existence of a strong connection form. Also we obtain an explicit formula for a strong connection under equivariant projective conditions or under coseparability conditions.

Design of Fuzzy Controller for Direct Drive Wind Turbines

Based on the research results of these years,this paper proposes a design of 3MW direct-driven wind generation inverter,and takes much effort in the control algorithm research and MATLAB simulation.Some wonderful results are obtained.All this may provide the reference for practical application.The fuzzy controllers are designed,based on fuzzy logic control theory,which can perfect control of wind generation system with no mathematic model.Models of permanent magnet synchronous generator(PMSG) and dual pulse width modulation(PWM) converter with their controllers are set by MATLAB/Simulink.In addition,experiments are made on the simulation platform of variable speed constant frequency(VSCF) wind power generation system.The behavior of dual PWM converter is demonstrated by simulations and experiment,and the control strategy is valid and correct.