Nonlinear loads in the power distribution system cause non-sinusoidal currents and voltages with harmonic components.Shunt active filters(SAF) with current controlled voltage source inverters(CCVSI) are usually used t...Nonlinear loads in the power distribution system cause non-sinusoidal currents and voltages with harmonic components.Shunt active filters(SAF) with current controlled voltage source inverters(CCVSI) are usually used to obtain balanced and sinusoidal source currents by injecting compensation currents.However,CCVSI with traditional controllers have a limited transient and steady state performance.In this paper,we propose an adaptive dynamic programming(ADP) controller with online learning capability to improve transient response and harmonics.The proposed controller works alongside existing proportional integral(PI) controllers to efficiently track the reference currents in the d-q domain.It can generate adaptive control actions to compensate the PI controller.The proposed system was simulated under different nonlinear(three-phase full wave rectifier) load conditions.The performance of the proposed approach was compared with the traditional approach.We have also included the simulation results without connecting the traditional PI control based power inverter for reference comparison.The online learning based ADP controller not only reduced average total harmonic distortion by 18.41%,but also outperformed traditional PI controllers during transients.展开更多
Full bridge Zero Voltage Switch PWM converter combines advantages of the PWM control technique and resonant technique. However, Full ZVS is achieved only under large load current because resonant tank of this circu...Full bridge Zero Voltage Switch PWM converter combines advantages of the PWM control technique and resonant technique. However, Full ZVS is achieved only under large load current because resonant tank of this circuit is made up of the parasitic capacitance of the power semiconductors and the leakage inductor of the transformer primary. In this paper two saturable inductors as magnetic switches are added to secondary, so output inductor is always reflected to primary and assists resonant transition. Full ZVS is achieved under lower load current. The above mentioned investigated results are validated by the computerized simulation and hardware circuit experiment.展开更多
An inverter type power source system for robot arc welding is considered. The power source includes several isolated gate bipolar transistor (IGBT) inverter power units. The output current of every individual power un...An inverter type power source system for robot arc welding is considered. The power source includes several isolated gate bipolar transistor (IGBT) inverter power units. The output current of every individual power unit is regulated by an identical single chip microcomputer to enable the whole power source system to work over a wide range of continuous output current with good dynamic properties. This inverter type power source satisfies robotic welding requirements.展开更多
A novel and simple ifrea! control algorithm using digital signal processor （DSP） has been proposed and realized for a three phase shunt active filter （SAF）. The simulation and prototype construction of SAF is cond...A novel and simple ifrea! control algorithm using digital signal processor （DSP） has been proposed and realized for a three phase shunt active filter （SAF）. The simulation and prototype construction of SAF is conducted to compensate the reactive power and harmonics in a distribution system. The major feature of the proposed ifreal algorithm is that it does not require unit vector templates and any transformations for the reference current genera- tion of SAF. This reduces the computational complexity and makes the control flexible and faster. The simulation is conducted in MATLAB/SIMULINK while DSP TMS320LF2407 is employed in the digital implementation of hysteresis current control （HCC） for experimentation. The hardware results correlate with the simulation results in reducing the total harmonic distortion （THD） of the source current and achieving unity power factor.展开更多
文摘Nonlinear loads in the power distribution system cause non-sinusoidal currents and voltages with harmonic components.Shunt active filters(SAF) with current controlled voltage source inverters(CCVSI) are usually used to obtain balanced and sinusoidal source currents by injecting compensation currents.However,CCVSI with traditional controllers have a limited transient and steady state performance.In this paper,we propose an adaptive dynamic programming(ADP) controller with online learning capability to improve transient response and harmonics.The proposed controller works alongside existing proportional integral(PI) controllers to efficiently track the reference currents in the d-q domain.It can generate adaptive control actions to compensate the PI controller.The proposed system was simulated under different nonlinear(three-phase full wave rectifier) load conditions.The performance of the proposed approach was compared with the traditional approach.We have also included the simulation results without connecting the traditional PI control based power inverter for reference comparison.The online learning based ADP controller not only reduced average total harmonic distortion by 18.41%,but also outperformed traditional PI controllers during transients.
文摘Full bridge Zero Voltage Switch PWM converter combines advantages of the PWM control technique and resonant technique. However, Full ZVS is achieved only under large load current because resonant tank of this circuit is made up of the parasitic capacitance of the power semiconductors and the leakage inductor of the transformer primary. In this paper two saturable inductors as magnetic switches are added to secondary, so output inductor is always reflected to primary and assists resonant transition. Full ZVS is achieved under lower load current. The above mentioned investigated results are validated by the computerized simulation and hardware circuit experiment.
文摘An inverter type power source system for robot arc welding is considered. The power source includes several isolated gate bipolar transistor (IGBT) inverter power units. The output current of every individual power unit is regulated by an identical single chip microcomputer to enable the whole power source system to work over a wide range of continuous output current with good dynamic properties. This inverter type power source satisfies robotic welding requirements.
文摘A novel and simple ifrea! control algorithm using digital signal processor （DSP） has been proposed and realized for a three phase shunt active filter （SAF）. The simulation and prototype construction of SAF is conducted to compensate the reactive power and harmonics in a distribution system. The major feature of the proposed ifreal algorithm is that it does not require unit vector templates and any transformations for the reference current genera- tion of SAF. This reduces the computational complexity and makes the control flexible and faster. The simulation is conducted in MATLAB/SIMULINK while DSP TMS320LF2407 is employed in the digital implementation of hysteresis current control （HCC） for experimentation. The hardware results correlate with the simulation results in reducing the total harmonic distortion （THD） of the source current and achieving unity power factor.
