Self-healing hydrogels have attracted tremendous attention in the field of oil and gas drilling and production engineering because of their excellent self-healing performance after physical damage.In this study,a seri...Self-healing hydrogels have attracted tremendous attention in the field of oil and gas drilling and production engineering because of their excellent self-healing performance after physical damage.In this study,a series of double network self-healing(DN_(SA))hydrogels based on hydrophobic association and ionic bond were prepared for plugging pores and fractures in formations in oil and gas drilling and production engineering.The mechanical,rheological,and self-healing properties of the DN_(SA)hydrogels were investigated.Results revealed that the DN_(SA)hydrogels exhibited excellent mechanical properties with a tensile stress of 0.67 MPa and toughness of 7069 kJ/cm^(3) owing to the synergistic effect of the double network.In addition,the DN_(SA)hydrogels exhibited excellent compression resistance,notch insensitivity,and self-healing properties.The DN_(SA)-2 hydrogel was granulated and made into gel particles with different particle sizes and used as a plugging agent.The self-healing mechanism of DN_(SA)-2 hydrogel particles in fractures was explored,and it’s plugging effect on fractures of different widths and porous media of different permeabilities were investigated.Experimental results revealed that the plugging capacity of the DN_(SA)-2 hydrogel particles for a fracture with width of 5 mm and a porous medium with a permeability of 30μm^(2) was 3.45 and 4.21 MPa,respectively,which is significantly higher than those of commonly used plugging agents in the oilfield.The DN_(SA)hydrogels with excellent mechanical and self-healing properties prepared in this study will provide a new approach for applying hydrogels in oil and gas drilling and production engineering.展开更多
Novel Yb_(x)Ce_(1-x)O_(2-0.5x)(x=0-0.8)ceramics,designed by replacing Ce^(4+)with Yb^(3+)ions were prepared by conventional oxide reaction,and the structural stability of the cubic fluorite structure was assessed usin...Novel Yb_(x)Ce_(1-x)O_(2-0.5x)(x=0-0.8)ceramics,designed by replacing Ce^(4+)with Yb^(3+)ions were prepared by conventional oxide reaction,and the structural stability of the cubic fluorite structure was assessed using lattice energy and ionic properties of Ce/Yb-O bonds.The oxygen vacancy caused by unequal substitution,which played a decisive role in bond ionicity and lattice energy,was analyzed experimentally by XPS and also theoretically by first principles.The Yb_(x)Ce_(1-x)O_(2-0.5x) ceramics maintain a stable cubic fluorite structure when x≤0.47,corresponding to the minimum lattice energy of 4142 kJ/mol with the lowest ionicity as ƒ_(i)=87.57%.For microwave dielectric properties,when the Yb_(x)Ce_(1-x)O_(2-0.5x)(x=0-0.4)ceramics are pure phase,the porosity-corrected permittivity is dependent on the bond ionicity.The Q׃ values are related to the lattice energy and grain distribution.The temperature coefficient of resonance frequency has been analyzed using bond valence.When the Yb_(x)Ce_(1-x)O_(2-0.5x)(x=0.5-0.8)ceramics are multiple phases,the microwave dielectric properties are associated with the phase composition and grain growth.展开更多
The article raises the question of how diffusion pairs A/B,A/C,and B/C form in three-component alloys ABC.This issue solves experimentally using the TEM(transmission electron microscopy)method and Ni65Mo20Cr15 alloy.T...The article raises the question of how diffusion pairs A/B,A/C,and B/C form in three-component alloys ABC.This issue solves experimentally using the TEM(transmission electron microscopy)method and Ni65Mo20Cr15 alloy.The quenching of this alloy from a liquid showed that such pairs form in the liquid state of the alloy,and as the quenching temperature decreases,particles of the new phases form inside them.We concluded that not a disordered solid solution after high-temperature quenching“from a region of disordered solid solution at the phase diagrams”is the starting point for the formation of a low-temperature microstructure,but a liquid state,into which the alloy passes during its melting.The author hopes the results got will lead to a reorientation of our ideas about alloys and will change a lot both in the theory of alloys and in the technology of their manufacture.展开更多
The paper discusses the researches that formed the basis of the study of the transition of “ordering-phase separation” and the reasons for such transition occurrence. Experimental results have presented what diffusi...The paper discusses the researches that formed the basis of the study of the transition of “ordering-phase separation” and the reasons for such transition occurrence. Experimental results have presented what diffusion pairs are and how they occur in binary and multicomponent alloys. The paper illustrates that the chemical bonds between atoms are realized on the principle of pair interaction in both solid and liquid states of the alloy. The process of separating a multi-component ABC alloy into diffusion pairs A/B, A/C, and B/C occurs in a liquid solution, where the diffusion mobility of atoms is very high, and the resistance of the environment is relatively low. The driving force of such a process is the chemical attraction between like and unlike atoms, that is, the tendency to phase separation and the tendency to ordering. Quenching the liquid alloy into the water fixes a microstructure consisting of microscopic areas corresponding in composition to one or another diffusion pairs. The paper shows what exactly should be done so that such a branch of science as Materials Science could get rid of the empirical approach when creating new alloys.展开更多
Photo-induced self-healing composites have attracted more and more attention as a kind of materials that can be controlled remotely and accurately in real time.Here,we report a strategy of a photo-responsive system ba...Photo-induced self-healing composites have attracted more and more attention as a kind of materials that can be controlled remotely and accurately in real time.Here,we report a strategy of a photo-responsive system based on hydrogen and ion bonds capable of performing self-healing process by ultraviolet wave-lengths,which is covalently cross-linked zinc-dimethylglyoxime-polyurethane coordination network with triple dynamic bonds.The recombination of hydrogen bond and metal coordination bond produces ef-fective healing performance.The self-healing behavior and temperature dependence of 3D micro-crack is investigated by molecular dynamics simulations to reveal the mechanism of self-healing at molecu-lar level.Moreover,the hybrid of copper-doped zinc oxide not only provides metal coordination bonds to enhance the self-healing rate,but also enhances the photothermal effect and anti-bacterial properties of polyurethane.Importantly,doping of copper generates more defects and forms a space charge layer on the surface of zinc oxide.The defects could trap surface electrons and holes,preventing the recom-bination of photo-induced electron-hole pairs,generating more heat through lattice vibration.Therefore,under ultraviolet light irradiation,the polyurethane can reach 62.7°C for 60 s,and the scratches of the polyurethane can be healed within 30 min and fully healed within 1 h.展开更多
In this study,powders of polyethylene oxide(PEO) and lithium perchlorate(Li Cl O4) were used as the raw materials for producing the ionic conduction polymer PEO–Li Cl O4 with different complex-ratios and used for...In this study,powders of polyethylene oxide(PEO) and lithium perchlorate(Li Cl O4) were used as the raw materials for producing the ionic conduction polymer PEO–Li Cl O4 with different complex-ratios and used for anodic bonding through high energy ball milling method,and meanwhile,X-ray diffraction,differential scanning calorimetry(DSC),ultraviolet absorption spectrum test analysis,and other relevant methods were adopted to research the complexation mechanism of PEO and Li Cl O4 and the impact of the ionic conduction polymer with different complex-ratios on the anodic bonding process under the action of the strong static electric field.The research results showed that the crystallization of PEO could be effectively obstructed with increased addition of Li Cl O4,thus increasing the content of PEO–Li Cl O4 in amorphous area and continuously improving the complexation degree and the room-temperature conductivity thereof,and that the higher room-temperature conductivity enabled PEO–Li Cl O4 to better bond with metallic aluminum and have better bonding quality.As the new encapsulating material,such research results will promote the application of new polymer functional materials in micro-electromechanical system(MEMS) components.展开更多
Dimethyl 4,6-bis(bromomethyl)isophthalate was synthesized by bromomethylation,oxidation,esterification and bromination of 1,3-dimethylbenzene.This was used to initiate the atom transfer radical polymerization of styre...Dimethyl 4,6-bis(bromomethyl)isophthalate was synthesized by bromomethylation,oxidation,esterification and bromination of 1,3-dimethylbenzene.This was used to initiate the atom transfer radical polymerization of styrene successfully.Results showed that the process had some of the good characteristics of controlled/living free radical poly-merization.The molecular weight of the obtained polymer increased linearly with monomer conversion,its molecular weight distribution was very narrow,and a linear relationship between ln([M]0/[M])and polymerization time was found.A well-defined novel structural polystyrene containing two ester groups in the mid-main chain was prepared with con-trolled molecular weight and narrow polydispersity.The structure of the polymer was confirmed by 1H-NMR spectra.After being hydrolyzed,dicarboxy polystyrene was obtained and used to form ionic-bonded supramolecules with 1-dodecanamine as a model of the star-shaped supramolecules.The supramolecules formed were characterized by Fourier transform infrared(FTIR)spectrum.展开更多
The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reli...The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reliability must be complete. However, the discovery of the “ordering-separation” phase transition, which showed that in binary alloys at certain temperatures the sign of the chemical interatomic interaction changes (and, consequently, the microstructure changes), forces us to reconsider our ideas about those areas. Currently, these areas are designated on diagrams as areas of a “disordered solid solution.” This article proposes, using transmission electron microscopy, to study all the so-called solid solution regions, and apply the results obtained to the studied regions of the phase diagram.展开更多
Although bioinspired sacrificial bonds have been demonstrated to be efficient in improving the mechanical properties of polymer materials, the effect of binding energy of a specific dynamic bond on the ultimate mechan...Although bioinspired sacrificial bonds have been demonstrated to be efficient in improving the mechanical properties of polymer materials, the effect of binding energy of a specific dynamic bond on the ultimate mechanical performance of a polymer network with dual-crosslink remains unclear. In this contribution, diamine and sulfur curing package are introduced simultaneously into a sulfonated cis-1,4-polyisoprene to create dually-crosslinked cis-1,4-polyisoprene network with sulfonate-aminium ionic bonds as the sacrificial bonds. Three diamines (primary, secondary and tertiary) with the same spacer between the two nitrogen atoms are used to create the ionic bonds with different binding energies. Although the binding energy of ionic bond does not affect the glass transition temperature of cis-1,4-polyisoprene (IR), it exerts definite influences on strain-induced crystallization and mechanical performance. The capabilities of diamine in dissipating energy, promoting strain-induced crystallization and enhancing the mechanical performance are in the same order of secondary diamine 〉 primary diamine 〉 tertiary diamine. The variations in mechanical performances are correlated to the binding energy of the ionic bond, which is determined by pKa values.展开更多
Polyampholyte gels,which have hierarchical structures,exhibit excellent self-healing properties and have great promise for biomaterials and bioengineering.We investigated the relationship between microscopic structure...Polyampholyte gels,which have hierarchical structures,exhibit excellent self-healing properties and have great promise for biomaterials and bioengineering.We investigated the relationship between microscopic structures and macroscopic viscoelastic properties of polyampholyte gels and found three factors influencing their viscoelastic properties,including the chemical crosslinking bonds,topological entanglements controlled by monomer concentration,and the ionic bonds.Ionic strength plays a major role on the strength of ionic bonds.A crossover point of elastic modulus and loss modulus was observed in the dynamic frequency sweeps at low monomer concentration or low chemical crosslinking density for gels with intermediate strength of ionic bonds.The solid-liquid transition signaled by the crossover point is a typical feature of dynamic associated gels,representing the dynamical association-dissociation of the ionic bonds and full relaxation of the topological entanglements in the gel network.While the crossover point disappears when the ionic bonds are too weak or too strong to form“permanent”bonds.Consistently,in the non-linear yielding measurement,gels with intermediate strength of the ionic bonds are ductile and yield at very large shear strain due to the self-healing properties and the dynamic association-dissociation of the ionic bonds.But the self-healing properties disappear when the ionic bond strength is too weak or too strong.Our work reveals the mechanism of how the dynamic association-dissociation of ionic bonds influences both the linear and non-linear viscoelastic properties of the polyampholyte gels.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52074327 and 51991361)。
文摘Self-healing hydrogels have attracted tremendous attention in the field of oil and gas drilling and production engineering because of their excellent self-healing performance after physical damage.In this study,a series of double network self-healing(DN_(SA))hydrogels based on hydrophobic association and ionic bond were prepared for plugging pores and fractures in formations in oil and gas drilling and production engineering.The mechanical,rheological,and self-healing properties of the DN_(SA)hydrogels were investigated.Results revealed that the DN_(SA)hydrogels exhibited excellent mechanical properties with a tensile stress of 0.67 MPa and toughness of 7069 kJ/cm^(3) owing to the synergistic effect of the double network.In addition,the DN_(SA)hydrogels exhibited excellent compression resistance,notch insensitivity,and self-healing properties.The DN_(SA)-2 hydrogel was granulated and made into gel particles with different particle sizes and used as a plugging agent.The self-healing mechanism of DN_(SA)-2 hydrogel particles in fractures was explored,and it’s plugging effect on fractures of different widths and porous media of different permeabilities were investigated.Experimental results revealed that the plugging capacity of the DN_(SA)-2 hydrogel particles for a fracture with width of 5 mm and a porous medium with a permeability of 30μm^(2) was 3.45 and 4.21 MPa,respectively,which is significantly higher than those of commonly used plugging agents in the oilfield.The DN_(SA)hydrogels with excellent mechanical and self-healing properties prepared in this study will provide a new approach for applying hydrogels in oil and gas drilling and production engineering.
基金the Fundamental Research Funds for the Central Universities(Grant No.2020ZDPYMS12).
文摘Novel Yb_(x)Ce_(1-x)O_(2-0.5x)(x=0-0.8)ceramics,designed by replacing Ce^(4+)with Yb^(3+)ions were prepared by conventional oxide reaction,and the structural stability of the cubic fluorite structure was assessed using lattice energy and ionic properties of Ce/Yb-O bonds.The oxygen vacancy caused by unequal substitution,which played a decisive role in bond ionicity and lattice energy,was analyzed experimentally by XPS and also theoretically by first principles.The Yb_(x)Ce_(1-x)O_(2-0.5x) ceramics maintain a stable cubic fluorite structure when x≤0.47,corresponding to the minimum lattice energy of 4142 kJ/mol with the lowest ionicity as ƒ_(i)=87.57%.For microwave dielectric properties,when the Yb_(x)Ce_(1-x)O_(2-0.5x)(x=0-0.4)ceramics are pure phase,the porosity-corrected permittivity is dependent on the bond ionicity.The Q׃ values are related to the lattice energy and grain distribution.The temperature coefficient of resonance frequency has been analyzed using bond valence.When the Yb_(x)Ce_(1-x)O_(2-0.5x)(x=0.5-0.8)ceramics are multiple phases,the microwave dielectric properties are associated with the phase composition and grain growth.
文摘The article raises the question of how diffusion pairs A/B,A/C,and B/C form in three-component alloys ABC.This issue solves experimentally using the TEM(transmission electron microscopy)method and Ni65Mo20Cr15 alloy.The quenching of this alloy from a liquid showed that such pairs form in the liquid state of the alloy,and as the quenching temperature decreases,particles of the new phases form inside them.We concluded that not a disordered solid solution after high-temperature quenching“from a region of disordered solid solution at the phase diagrams”is the starting point for the formation of a low-temperature microstructure,but a liquid state,into which the alloy passes during its melting.The author hopes the results got will lead to a reorientation of our ideas about alloys and will change a lot both in the theory of alloys and in the technology of their manufacture.
文摘The paper discusses the researches that formed the basis of the study of the transition of “ordering-phase separation” and the reasons for such transition occurrence. Experimental results have presented what diffusion pairs are and how they occur in binary and multicomponent alloys. The paper illustrates that the chemical bonds between atoms are realized on the principle of pair interaction in both solid and liquid states of the alloy. The process of separating a multi-component ABC alloy into diffusion pairs A/B, A/C, and B/C occurs in a liquid solution, where the diffusion mobility of atoms is very high, and the resistance of the environment is relatively low. The driving force of such a process is the chemical attraction between like and unlike atoms, that is, the tendency to phase separation and the tendency to ordering. Quenching the liquid alloy into the water fixes a microstructure consisting of microscopic areas corresponding in composition to one or another diffusion pairs. The paper shows what exactly should be done so that such a branch of science as Materials Science could get rid of the empirical approach when creating new alloys.
基金supported by the National Natu-ral Science Foundation Joint Fund(No.U1806223)the National Natural Science Foundation of China(Nos.51572249,42076039)+1 种基金the Foundation of Key Laboratory of National Defense Science and Technology(No.JS220406)the Natural Science Foundation of Shandong Province(No.ZR2020ME016).
文摘Photo-induced self-healing composites have attracted more and more attention as a kind of materials that can be controlled remotely and accurately in real time.Here,we report a strategy of a photo-responsive system based on hydrogen and ion bonds capable of performing self-healing process by ultraviolet wave-lengths,which is covalently cross-linked zinc-dimethylglyoxime-polyurethane coordination network with triple dynamic bonds.The recombination of hydrogen bond and metal coordination bond produces ef-fective healing performance.The self-healing behavior and temperature dependence of 3D micro-crack is investigated by molecular dynamics simulations to reveal the mechanism of self-healing at molecu-lar level.Moreover,the hybrid of copper-doped zinc oxide not only provides metal coordination bonds to enhance the self-healing rate,but also enhances the photothermal effect and anti-bacterial properties of polyurethane.Importantly,doping of copper generates more defects and forms a space charge layer on the surface of zinc oxide.The defects could trap surface electrons and holes,preventing the recom-bination of photo-induced electron-hole pairs,generating more heat through lattice vibration.Therefore,under ultraviolet light irradiation,the polyurethane can reach 62.7°C for 60 s,and the scratches of the polyurethane can be healed within 30 min and fully healed within 1 h.
基金supported by the National Natural Science Foundation of China (No.51275332)the Natural Science Foundation for Young Scientists of Shanxi Province,China (No.2014021025-2)
文摘In this study,powders of polyethylene oxide(PEO) and lithium perchlorate(Li Cl O4) were used as the raw materials for producing the ionic conduction polymer PEO–Li Cl O4 with different complex-ratios and used for anodic bonding through high energy ball milling method,and meanwhile,X-ray diffraction,differential scanning calorimetry(DSC),ultraviolet absorption spectrum test analysis,and other relevant methods were adopted to research the complexation mechanism of PEO and Li Cl O4 and the impact of the ionic conduction polymer with different complex-ratios on the anodic bonding process under the action of the strong static electric field.The research results showed that the crystallization of PEO could be effectively obstructed with increased addition of Li Cl O4,thus increasing the content of PEO–Li Cl O4 in amorphous area and continuously improving the complexation degree and the room-temperature conductivity thereof,and that the higher room-temperature conductivity enabled PEO–Li Cl O4 to better bond with metallic aluminum and have better bonding quality.As the new encapsulating material,such research results will promote the application of new polymer functional materials in micro-electromechanical system(MEMS) components.
基金supported by the National Natural Science Foundation of China(Grant No.20474059)Specialized Research Fund for the Doctoral Program of Higher Education(Grant No.20040358017).
文摘Dimethyl 4,6-bis(bromomethyl)isophthalate was synthesized by bromomethylation,oxidation,esterification and bromination of 1,3-dimethylbenzene.This was used to initiate the atom transfer radical polymerization of styrene successfully.Results showed that the process had some of the good characteristics of controlled/living free radical poly-merization.The molecular weight of the obtained polymer increased linearly with monomer conversion,its molecular weight distribution was very narrow,and a linear relationship between ln([M]0/[M])and polymerization time was found.A well-defined novel structural polystyrene containing two ester groups in the mid-main chain was prepared with con-trolled molecular weight and narrow polydispersity.The structure of the polymer was confirmed by 1H-NMR spectra.After being hydrolyzed,dicarboxy polystyrene was obtained and used to form ionic-bonded supramolecules with 1-dodecanamine as a model of the star-shaped supramolecules.The supramolecules formed were characterized by Fourier transform infrared(FTIR)spectrum.
文摘The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reliability must be complete. However, the discovery of the “ordering-separation” phase transition, which showed that in binary alloys at certain temperatures the sign of the chemical interatomic interaction changes (and, consequently, the microstructure changes), forces us to reconsider our ideas about those areas. Currently, these areas are designated on diagrams as areas of a “disordered solid solution.” This article proposes, using transmission electron microscopy, to study all the so-called solid solution regions, and apply the results obtained to the studied regions of the phase diagram.
基金financially supported by the National Basic Research Program of China(No.2015CB654700(2015CB654703))the National Natural Science Foundation of China(Nos.51673065,51703064,51473050 and 51333003)Fundamental Research Funds for the Central Universities(No.2017PY006)
文摘Although bioinspired sacrificial bonds have been demonstrated to be efficient in improving the mechanical properties of polymer materials, the effect of binding energy of a specific dynamic bond on the ultimate mechanical performance of a polymer network with dual-crosslink remains unclear. In this contribution, diamine and sulfur curing package are introduced simultaneously into a sulfonated cis-1,4-polyisoprene to create dually-crosslinked cis-1,4-polyisoprene network with sulfonate-aminium ionic bonds as the sacrificial bonds. Three diamines (primary, secondary and tertiary) with the same spacer between the two nitrogen atoms are used to create the ionic bonds with different binding energies. Although the binding energy of ionic bond does not affect the glass transition temperature of cis-1,4-polyisoprene (IR), it exerts definite influences on strain-induced crystallization and mechanical performance. The capabilities of diamine in dissipating energy, promoting strain-induced crystallization and enhancing the mechanical performance are in the same order of secondary diamine 〉 primary diamine 〉 tertiary diamine. The variations in mechanical performances are correlated to the binding energy of the ionic bond, which is determined by pKa values.
基金supported by the National Natural Science Foundation of China(No.22273114)the National Key R&D Program of China(No.2023YFE0124500)+1 种基金the National Key R&D Program of China(No.2023YFC2411203)International Partnership Program of the Chinese Academy of Sciences(No.027GJHZ2022061FN).
文摘Polyampholyte gels,which have hierarchical structures,exhibit excellent self-healing properties and have great promise for biomaterials and bioengineering.We investigated the relationship between microscopic structures and macroscopic viscoelastic properties of polyampholyte gels and found three factors influencing their viscoelastic properties,including the chemical crosslinking bonds,topological entanglements controlled by monomer concentration,and the ionic bonds.Ionic strength plays a major role on the strength of ionic bonds.A crossover point of elastic modulus and loss modulus was observed in the dynamic frequency sweeps at low monomer concentration or low chemical crosslinking density for gels with intermediate strength of ionic bonds.The solid-liquid transition signaled by the crossover point is a typical feature of dynamic associated gels,representing the dynamical association-dissociation of the ionic bonds and full relaxation of the topological entanglements in the gel network.While the crossover point disappears when the ionic bonds are too weak or too strong to form“permanent”bonds.Consistently,in the non-linear yielding measurement,gels with intermediate strength of the ionic bonds are ductile and yield at very large shear strain due to the self-healing properties and the dynamic association-dissociation of the ionic bonds.But the self-healing properties disappear when the ionic bond strength is too weak or too strong.Our work reveals the mechanism of how the dynamic association-dissociation of ionic bonds influences both the linear and non-linear viscoelastic properties of the polyampholyte gels.