Iron ＆ Steel Industry China＇s outputs of crude steel, steel products, coke and ferrous alloys in 2012 were 716.54 million tons （up 3.1% YOY）, 051.86 million tons （up 7.7% YOY）, 443.23 million tons （up 5.2% YOY...Iron ＆ Steel Industry China＇s outputs of crude steel, steel products, coke and ferrous alloys in 2012 were 716.54 million tons （up 3.1% YOY）, 051.86 million tons （up 7.7% YOY）, 443.23 million tons （up 5.2% YOY） and 31.29 million tons （up 15% YOY）,展开更多
This paper establishes a model for the production cost of iron and steel enterprise.The variation rule of the production cost versus the iron/steel ratio for two cases, namely,fixed steel production and a fixed amount...This paper establishes a model for the production cost of iron and steel enterprise.The variation rule of the production cost versus the iron/steel ratio for two cases, namely,fixed steel production and a fixed amount of molten iron,is analyzed,and the concept of a steel scrap threshold price is proposed.According to the analysis results,when the steel scrap unit price exceeds the steel scrap threshold price, an increase in the iron/steel ratio can reduce the production cost,and vice versa.When the gap between the steel scrap unit price and the steel scrap threshold price is relatively large, the impact of the iron/steel ratio on the production cost is more prominent.According to the calculation example,when steel production is fixed （284 358 t/month）and the steel scrap unit price is 263.2 yuan/t more than the steel scrap threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 750 000 yuan （2.63 yuan/t）.When the amount of molten iron is fixed （270 425 t/month）and the steel scrap unit price is 140.7 yuan/t more than the threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 430 000 yuan （1.5 yuan/t）.The results indicate that iron and steel enterprise should adjust the production strategy in time when the scrap price fluctuates, and then the production cost will be reduced.展开更多
A new type of corrosion inhibitor and fog suppressor composed of Nitrogen-containing alkaloid,water-soluble butadiene lower polymer, and inorganic electrolyte has been investigated by gravimetric and electrochemical m...A new type of corrosion inhibitor and fog suppressor composed of Nitrogen-containing alkaloid,water-soluble butadiene lower polymer, and inorganic electrolyte has been investigated by gravimetric and electrochemical method. Effects or this chemicals on pickling rate and hydrogen penetration into iron and steel material in 50～150 g/L HCI or/and H2SO4 solutions at 20～70℃ temperature were examined. The amount of acid fog escaping from the surface of air-liquid was determined by chemical titration. The results indicate that the efficiency of inhibition and suppression depends on film properties by which mean a barrier film on the interface of bare mild steel/solution or an unsolvable liquid membrane as hydrophibic effect.In present work the film-forming mechanism by in situ and chemistry-mechanics effect is also discussed.展开更多
Experimental and computational fluid dynamics (CFD) are investigated through the vortex tube system. The benefit of vortex tube is a counter flow type tube, which has further designed and fabricated for investigation....Experimental and computational fluid dynamics (CFD) are investigated through the vortex tube system. The benefit of vortex tube is a counter flow type tube, which has further designed and fabricated for investigation. The whole set up is consisting of a simple device that can separate a single stream of compressed air into two streams;one is at high temperature and the other is lower temperature following an inlet gas stream. The advantages of this tube are their compactness, safety, and low equipment cost mainly used in cooling and heating applications. This study addressed three-dimensional flows;the domain is using computational fluid dynamics (CFD) method and experimental approach to optimize the direction of RHVT. Through the CFD analysis, the best cold end diameter (dc), number of nozzles, and the best parameters for obtaining the highest hot gas temperature and lowest cold gas temperature were obtained and verified by experimental procedures.展开更多
文摘Iron ＆ Steel Industry China＇s outputs of crude steel, steel products, coke and ferrous alloys in 2012 were 716.54 million tons （up 3.1% YOY）, 051.86 million tons （up 7.7% YOY）, 443.23 million tons （up 5.2% YOY） and 31.29 million tons （up 15% YOY）,
基金The National Key Technology R&D Program during the 12th Five-Year Plan Period(No.2012BAF10B05)
文摘This paper establishes a model for the production cost of iron and steel enterprise.The variation rule of the production cost versus the iron/steel ratio for two cases, namely,fixed steel production and a fixed amount of molten iron,is analyzed,and the concept of a steel scrap threshold price is proposed.According to the analysis results,when the steel scrap unit price exceeds the steel scrap threshold price, an increase in the iron/steel ratio can reduce the production cost,and vice versa.When the gap between the steel scrap unit price and the steel scrap threshold price is relatively large, the impact of the iron/steel ratio on the production cost is more prominent.According to the calculation example,when steel production is fixed （284 358 t/month）and the steel scrap unit price is 263.2 yuan/t more than the steel scrap threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 750 000 yuan （2.63 yuan/t）.When the amount of molten iron is fixed （270 425 t/month）and the steel scrap unit price is 140.7 yuan/t more than the threshold price,an increase of 0.01 in the iron/steel ratio causes a monthly production cost reduction of approximately 430 000 yuan （1.5 yuan/t）.The results indicate that iron and steel enterprise should adjust the production strategy in time when the scrap price fluctuates, and then the production cost will be reduced.
文摘A new type of corrosion inhibitor and fog suppressor composed of Nitrogen-containing alkaloid,water-soluble butadiene lower polymer, and inorganic electrolyte has been investigated by gravimetric and electrochemical method. Effects or this chemicals on pickling rate and hydrogen penetration into iron and steel material in 50～150 g/L HCI or/and H2SO4 solutions at 20～70℃ temperature were examined. The amount of acid fog escaping from the surface of air-liquid was determined by chemical titration. The results indicate that the efficiency of inhibition and suppression depends on film properties by which mean a barrier film on the interface of bare mild steel/solution or an unsolvable liquid membrane as hydrophibic effect.In present work the film-forming mechanism by in situ and chemistry-mechanics effect is also discussed.
文摘Experimental and computational fluid dynamics (CFD) are investigated through the vortex tube system. The benefit of vortex tube is a counter flow type tube, which has further designed and fabricated for investigation. The whole set up is consisting of a simple device that can separate a single stream of compressed air into two streams;one is at high temperature and the other is lower temperature following an inlet gas stream. The advantages of this tube are their compactness, safety, and low equipment cost mainly used in cooling and heating applications. This study addressed three-dimensional flows;the domain is using computational fluid dynamics (CFD) method and experimental approach to optimize the direction of RHVT. Through the CFD analysis, the best cold end diameter (dc), number of nozzles, and the best parameters for obtaining the highest hot gas temperature and lowest cold gas temperature were obtained and verified by experimental procedures.
