Enhanced recovery of high-purity Fe powder from iron-rich electrolytic manganese residue by slurry electrolysis

Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.

An amorphous manganese iron oxide hollow nanocube cathode for aqueous zinc ion batteries

Aqueous zinc ion batteries(ZIBs) are attracting considerable attentions for practical energy storage because of their low cost and high safety.Nevertheless,the traditional manganese oxide cathode materials suffer from the low intrinsic electronic conductivity,sluggish ions diffusion kinetics,and structural collapse,hindering their large-scale application.Herein,we successfully developed a latent amorphous Mn_(1.8)Fe_(1.2)O_(4) hollow nanocube(a-H-MnFeO) cathode material derived from Prussian blue analogue precursor.The amorphous nature endows the cathode with lower diffusion barrier and narrower band gap compared with crystalline counterpart,resulting in the superior Zn^(2+) ions and electrons transport kinetics.Hollow structure can furnish abundant surface sites and suppress the structural collapse during the repeated charge/discharge processes.By virtue of the multiple advantageous features,the a-H-MnFeO cathode exhibits exceptional electrochemical performance,in terms of high capacity,excellent rate capability,and prolonged cycle life.This strategy will pave the way for the structural design of emerging cathode materials.

Effect of arsenic on spatial pattern of radial oxygen loss and iron plaque formation in rice

The effects of different arsenic （As） treatments on spatial pattern of radial oxygen loss （ROL）, iron （Fe） plaque formation and As accumulation in rice were investigated using three rice genotypes, planted under greenhouse conditions. Arsenic was applied to soil at 50 and 100 mg/kg, with untreated soil used as a control having an average As concentration of 8.5 mg/kg. It was demonstrated that the ratio of ROL in root tips to that at the root base slightly decreased with increasing As concentration, suggesting that the spatial ROL patterns in these groups may be shifted from the “tight” barrier towards the “partial” barrier form. Furthermore, increasing As concentration led to a increase in Fe plaque formation on root surfaces. In addition, root As concentrations of genotypes in 50 and 100 mg/kg As treatments were significantly higher than that of control treatment （P〈0.05）. Grain As concentration of genotype Nanyangzhan （with lower ROL） was significantly higher （P〈0.05） than that of genotype CNT87059-3 with higher ROL.

Effect of microbial mediated iron plaque reduction on arsenic mobility in paddy soil

The potential of microbial mediated iron plaque reduction, and associated arsenic （As） mobility were examined by iron reducing bacteria enriched from As contaminated paddy soil. To our knowledge, this is the first time to report the impact of microbial iron plaque reduction on As mobility. Iron reduction occurred during the inoculation of iron reducing enrichment culture in the treatments with iron plaque and ferrihydrite as the electron acceptors, respectively. The Fe（II） concentration with the treatment of anthraquinone-2, 6-disulfonic acid （AQDS） and iron reducing bacteria increased much faster than the control. Arsenic released from iron plaque with the iron reduction, and a significant correlation between Fe（II） and total As in culture was observed. However, compared with control, the increasing rate of As was inhibited by iron reducing bacteria especially in the presence of AQDS. In addition, the concentrations of As（III） and As（V） in abiotic treatments were higher than those in the biotic treatments at day 30. These results indicated that both microbial and chemical reductions of iron plaque caused As release from iron plaque to aqueous phase, however, microbial iron reduction induced the formation of more crystalline iron minerals, leading to As sequestration. In addition, the presence of AQDS in solution can accelerate the iron reduction, the As release from iron plaque and subsequently the As retention in the crystalline iron mineral. Thus, our results suggested that it is possible to remediate As contaminated soils by utilizing iron reducing bacteria and AQDS.

Selective catalytic oxidation of NO over iron and manganese oxides supported on mesoporous silica

The selective catalytic oxidation （SCO） of NO was studied on a catalyst consisting of iron-manganese oxide supported on mesoporous silica （MPS） with different Mn/Fe ratios. Effects of the amount of manganese and iron, oxygen, and calcination temperature on NO conversion were also investigated. It was found that the Mn-Fe/MPS catalyst with a Mn/Fe molar ratio of 1 showed the highest activity at the calcination temperature of 400 °C. The results showed that over this catalyst, NO conversion reached 70% under the condition of 280 °C and a space velocity of 5000 h-1. SO2 and H2O had no adverse impact on the reaction activity when the SCO reaction temperature was above 240 °C. In addition, the SCO activity was suppressed gradually in the presence of SO2 and H2O below 240 °C, and such an effect was reversible after heating treatment.

Effect of Root Surface Iron Plaque on Se Translocation and Uptake by Fe-Deficient Rice

Under anaerobic conditions, ferric hydroxide deposits on the surface of rice roots and affects uptake and translocation of certain nutrients. In the present study, rice plants were cultured in Fe-deficient or sufficient solutions and placed in a medium containing selenium （Se） for 2 h. Then, FeSO4 was added at the various concentrations of 0, 10, 40, or 70 mg L-1 to induce varying levels of iron plaque on the root surfaces and subsequent uptake of Se was monitored. The uptake of Se was inhibited by the iron plaque, with the effect proportional to the amount of plaque induced. The activity of cysteine synthase was decreased with increasing amounts of iron plaque on the roots. This may be the important reason for iron plaque inhibition of Se translocation. At each level of iron plaque, Fe-deficient rice had more Se than Fe-sufficient rice. Furthermore, with plaque induced by 20 mg Fe L-1, plants from Fe-deficient media accumulated more Se than those from Fe-sufficient media, as the Se concentration was increased from 10 to 30 or 50 mg L^-1. We found that phytosiderophores, highly effective iron chelating agents, could desorb selenite from ferrihydrite. Root exudates of the Fe-deficient rice, especially phytosiderophores in the exudates, could enhance Se uptake by rice plants with iron plaque.

Effects of Potassium and Manganese Promoters on Nitrogen-Doped Carbon Nanotube-Supported Iron Catalysts for CO_2 Hydrogenation

Nitrogen-doped carbon nanotubes （NCNTs） were used as a support for iron （Fe） nanoparticles applied in car- bon dioxide （CO_2） hydrogenation at 633 K and 25 bar （1 bar = 10-5 Pa）. The Fe/NCNT catalyst promoted with both potassium （K） and manganese （Mn） showed high performance in CO_2 hydrogenation, reaching 34.9% conversion with a gas hourly space velocity （GHSV） of 3.1 L-（g·h）-1. Product selectivities were high for olefin products and low for short-chain alkanes for the K-promoted catalysts. When Fe/NCNT catalyst was promot- ed with both K and Mn, the catalytic activity was stable for 60 h of reaction time. The structural effect of the Mn promoter was demonstrated by X-ray diffraction （XRD）, temperature-programmed reduction （TPR） with molecular hydrogen （H2）, and in situ X-ray absorption near-edge structure （XANES） analysis. The Mn pro- moter stabilized wtistite （FeO） as an intermediate and lowered the TPR onset temperature. Catalytic ammo- nia （NH_3） decomposition was used as an additional probe reaction for characterizing the promoter effects. The Fe/NCNT catalyst promoted with both K and Mn had the highest catalytic activity, and the Mn-promoted Fe/NCNT catalysts had the highest thermal stability under reducing conditions.

Transformation of Iron and Manganese in Variable Charge Soils Caused by Submergence

Two variable charge soils were submerged after the addition of 30g/kg of organic matter to examine the differences in behavior between iron and manganese with respect to reduction and the distribution of different forms of the reduced elements. The reduction of manganese proceeded almost synchronously with the fall in redox potential, while the reduction of iron showed a remarkable lag behind the Eh change. Once formed,the distribution of water-soluble, exchangeable and precipitated forms of ferrous iron was controlled by PH,CEC of the soil and total concentration of the element. For manganous ions, the proportions of water-soluble and exchangeable forms in total Mn(2+) were larger than those for ferrous ions. The reduction of the two elements led to a mobilization of them, and such effect persisted even after drying of the soil, i.e.,the content of amorphous Fe became higher than that of the original soil.

Soil Manganese and Iron Released due to Calcium Salts:Bioavailability to Pepper (Capsicum frutescens L.)

Releases of manganese and iron ions from an albic soil (Albic-Udic Luvisol), a yellow-red soil (Hap-Udic Ferrisol) and a yellow-brown soil (Arp-Udic Luvisol) induced by calcium salt addition and their bioavailability to pepper (Capsicum frutescens L.) were studied in a pot experiment. Addition of Ca(NO3)2 decreased soil pH and increased both exchangeable and DTPA (diethylenetriamine pentaacetic acid)-extractable Mn and Fe in soils. Meanwhile, total Mn accumulation in the shoots of Capsicum frutescens L. on the salt-treated soils increased significantly (P ＜ 0.01) compared with the control, suggesting that salt addition to soil induced Mn toxicity in Capsicum frutescens L. Although exchangeable and DTPA-extractable Fe increased also in the salt-treated soils, Fe uptake by the shoots of Capsicum frutescens L. decreased. The effect of added salts in soils on dry matter weight of pepper varied with the soil characteristics, showing different buffer capacities of the soils for salt toxicity in an order of yellow-brown soil ＞ albic soil ＞ yellow-red soil. Fe/Mn ratio in shoots of Capsicum frutescens L. decreased with increasing salt addition for all the soils, which was ascribed to the antagonistic effect of Mn on Fe accumulation. The ratio of Fe/Mn in the tissue was a better indicator of the appearance of Mn toxicity symptoms than Mn concentration alone.

Effect of Manganese on As-Cast Microstructure and Hardening Behavior of High Chromium White Cast Iron

The effect of manganese on the as-cast structure and hardening behavior of high chromium white cast iron subjected to sub-critical treatment was studied.The results indicate that the fraction of retained austenite and the manganese distribution in as-cast alloys are controlled by manganese content.The manganese distribution in as-cast alloys is not homogeneous.The manganese content in carbide is higher than that in matrix.Whether the secondary hardening occurs or not and the peak hardness of secondary hardening is controlled by manganese content in retained austenite in as-cast structure.Higher manganese content can cause more retained austenite.The secondary hardening occurs in sub-critical treating process if the fraction of retained austenite is high.

Simultaneous Determination of Iron and Manganese in Water Using Artificial Neural Network Catalytic Spectrophotometric Method

A new analytical method using Back-Propagation (BP) artificial neural network and kinetic spectrophotometry for simultaneous determination of iron and magnesium in tap water, the Yellow River water and seawater is established. By conditional experiments, the optimum analytical conditions and parameters are obtained. Levenberg-Marquart (L-M) algorithm is used for calculation in BP neural network. The topological structure of three-layer BP ANN network architecture is chosen as 15-16-2 (nodes). The initial value of gradient coefficient μ is fixed at 0.001 and the increase factor and reduction factor of μ take the default values of the system. The data are processed by computers with our own programs written in MATLAB 7.0. The relative standard deviation of the calculated results for iron and manganese is 2.30% and 2.67% respectively. The results of standard addition method show that for the tap water, the recoveries of iron and manganese are in the ranges of 98.0%-104.3% and 96.5%-104.5%, and the RSD is in the range of 0.23%-0.98%; for the Yellow River water (Lijin district of Shandong Province), the recoveries of iron and manganese are in the ranges of 96.0%-101.0% and 98.7%-104.2%, and the RSD is in the range of 0.13%-2.52%; for the seawater in Qingdao offshore, the recoveries of iron and manganese are in the ranges of 95.3%-104.8% and 95.3%-104.7%, and the RSD is in the range of 0.14%-2.66%. It is found that 21 common cations and anions do not interfere with the determination of iron and manganese under the optimum experimental conditions. This method exhibits good reproducibility and high accuracy in the determination of iron and manganese and can be used for the simultaneous determination of iron and manganese in tap water and natural water. By using the established ANN- catalytic spectrophotometric method, the iron and manganese concentrations of the surface seawater at 11 sites in Qingdao offshore are determined and the level distribution maps of iron and manganese are drawn.

Study of Manganese Promoter on a Precipitated Iron-Based Catalyst for Fischer-Tropsch Synthesis

The effects of Manganese （Mn） incorporation on a precipitated iron-based Fischer-Tropsch synthesis （FTS） catalyst were investigated using N2 physical adsorption, air differential thermal analysis （DTA）, H2 temperature-programmed reduction （TPR）, and Mǒssbauer spectroscopy. The FTS performances of the catalysts were tested in a slurry phase reactor. The characterization results indicated that Mn increased the surface area of the catalyst, and improved the dispersion of （α-Fe2O3 and reduced its crystallite size as a result of the high dispersion effect of Mn and the Fe-Mn interaction. The Fe-Mn interaction also suppressed the reduction of （α-Fe2O3 to Fe3O4, stabilized the FeO phase, and （or） decreased the carburization degree of the catalysts in the H2 and syngas reduction processes. In addition, incorporated Mn decreased the initial catalyst activity, but improved the catalyst stability because Mn restrained the reoxidation of iron carbides to Fe3O4, and improved further carburization of the catalysts. Manganese suppressed the formation of CH4 and increased the selectivity to light olefins （C2-4^=）, but it had little effect on the selectivities to heavy （C5＋） hydrocarbons. All these results indicated that the strong Fe-Mn interaction suppressed the chemisorptive effect of the Mn as an electronic promoter, to some extent, in the precipitated iron-manganese catalyst system.

Lead and Cadmium Adsorption onto Iron Oxides and Manganese Oxides in the Natural Surface Coatings Collected on Natural Substances in the Songhua River of China

Natural surface coatings collected from natural substances （NSCsNS） were employed to study the roles of the main chemical components （iron oxides, manganese oxides, and other components） in controlling the adsorption of lead（Pb） and cadmium（Cd） in aquatic environments. The selective chemical extraction followed by the adsorption of Pb and Cd experiments and statistical analysis, were used to investigate the adsorption property of each component. Hydroxylamine hydrochloride was used to remove manganese oxides selectively, and sodium dithionite was used to extract iron oxides and manganese oxides. The result indicated that iron oxides and manganese oxides played an important role in the adsorption of Pb and Cd on NSCsNS, and the relative contribution was about two-thirds. The contribution of manganese oxides was the greatest, with a lesser role indicated for other components. The adsorption ability of manganese oxides for Pb and Cd was greater than that of iron oxides or other components for Pb and Cd. The Pb adsorption observed in each component was greater than Cd adsorption.

Study of the Sediments of the Dam of Okpara (Benin): Physico-Chemical Characterization and Speciation of Iron and Manganese

Iron and Manganese contents and parameters including pH, conductivity, and organic matter contents were determined in the sediments of the Okpara dam in Northern Benin. Fifteen samples were collected during a one-month period and analysed in laboratory using the method of sequential extraction of Tessier. The analyses indicated that sediments contained high concentrations in reducible fraction of Iron and relatively high contents of exchangeable fraction, acidhydrolysable fraction and residual fraction of Manganese. The findings of this study confirmed the hypotheses that the meal contents of the sediments were relatively high and varied according to the geochemical phases.

Effect of manganese on the catalytic performance of an iron-manganese bimetallic catalyst for light olefin synthesis

A systematic study was carried out to investigate the promotion effect of manganese on the performance of a coprecipitated iron-manganese bimetallic catalyst for the light olefins synthesis from syngas. The catalyst samples were characterized by N2 physisorption, transmis- sion electron microscopy （TEM）, X-ray photoelectron spectroscopy （XPS）, powder X-ray diffraction （XRD）, Mossbauer spectroscopy, H2- differential thermogravimetric analysis （H2-DTG）, CO temperature-programmed reduction （CO-TPR） and CO2 temperature-programmed des- orption （CO2-TPD）. The Fischer-Tropsch synthesis （FTS） performance of the catalyst was measured at 1.5 MPa, 250 ℃ and syngas with H2/CO ratio of 2.0. The characterization results indicated that the addition of manganese decreases the catalyst crystallite size, and improves the catalyst BET surface area and pore volume. The presence of manganese suppresses the catalyst reduction and carburization in H2, CO and syngas, respectively. The addition of manganese improves the catalytic activity of water-gas shift reaction and suppresses the oxidation of iron carbides in the FTS reaction. The incorporation of manganese improves the catalyst surface basicity and results in a significant improvement in the selectivities to light olefins and heavy hydrocarbons （C5＋）, and furthermore an inhibition of methane formation in FTS. The pure iron catalyst （Mn-00） has the highest initial FTS catalytic activity （65%） and the lowest selectivity （17.35 wt%） to light olefins （C2=-C4=）. The addition of an appropriate amount of manganese can improve the catalyst FTS activity.

Thermodynamic Behavior of Manganese and Phosphorus between Liquid Iron and CaO-MgO-SiO_2-Al_2O_3-Fe_tO-MnO-P_2O_5 Slags

The thermodynamic behavior of manganese and phosphorus between liquid iron and CaO-MgO-SiO2-Al2O3-FetO-MnO-P2O5 ladle slag system was addressed by investigating the thermodynamic equilibria between liquid iron containing Mn and P and the ladle slag at 1873 K. The Mn distribution ratio L-Mn increases with increasing FetO content and decreasing the basicity ((%CaO + %MgO)/(%SiO2 + %Al2O3 + %P2O5)) in slag, while the P distribution ratio Lp seems to be increased as FetO content and the basicity increases. The values of L-Mn and L-p decrease by the addition of Al2O3 into slag. The expression of the dependence of L-Mn and L-p on the basicity and FetO content in slag was obtained.

Effects of Copper and Manganese on Hemocyte Apoptosis and Antagonism of Iron and Zinc in Oreochromis niloticus

This study aimed to investigate the effects of copper and manganese on hemocyte apoptosis and the antagonism of iron and zinc in Oreochromis niloticus The heavy metal contents in fish blood and feed were determined by atomic absorption spectrophotometry, and the hemocyte apoptosis was determined by flow cytometry. A total of 360 tilapias were selected, and they were divided randomly and evenly into 12 groups. In the challenge groups, the tilapias were fed with con stant-level copper sulfate（0, 200 mg/kg） and manganese sulfate（0, 120 mg/kg）; in the antagonism groups, the tilapias were fed with constant-level zinc sulfate（20320 mg/kg） and iron sulfate（150, 350 mg/kg）. After 20-week aquaculture, the hemocyte apoptosis rates in the copper and manganese groups were significantly increased; with the increased addition levels of iron and zinc, the hemocyte apopto sis rates in the iron and zinc groups were significantly reduced, but they were stil higher than that in the control group. In conclusion, excessive copper and manganese can cause apoptosis in hemocytes of O. niloticus. However, the toxic effects of copper and manganese can be antagonized by iron and zinc.

Iron and Manganese in Groundwater of Rrogozhina Aquifer, Western Albania

This paper aims to advance previous studies on the iron and manganese content in groundwater of Rrogozhina aquifer （western Albania） and to show the factors which control the content of both iron and manganese in groundwater of this aquifer. Rrogozhina aquifer represents an important groundwater source of the country whose relevance was highly increased during recent years because of the demographic expansion in this region. This is a typically multi-layered artesian aquifer which consists of sandstone and conglomerate with high heterogeneous permeability. The groundwater mostly belongs to HCO3-Mg-Ca hydrochemical type. The content of soluble iron and manganese in groundwater ranges from 0.004 mg/L to 0.7 mg/L, and from 0.0 mg/L to 1.147 mg/L, respectively. Deeper the groundwater occurs and longer the distance from the recharge zone, higher is the content of Fe2＋ in groundwater due to gradual depletion of Oe in groundwater. The content of iron is higher than that WHO and EU recommended, which were 21% and 25% respectively, while the content of manganese were 17% and 23%, respectively. Abstraction of groundwater with high quantities by deeper wells would be accompanied by increase of dissolved iron and manganese content in groundwater which should be treated （with aeration） in order to decrease the content of these two elements in the water before using it.

Study on iron-manganese catalysts for Fischer-Tropsch synthesis

铁锰催化剂被一起沉淀方法准备。催化剂的描述被使用 X 光衍射(XRD ) 执行，扫描电子显微镜学(SEM ) ，温度程序减小(TPR ) ， N2 吸附解吸附作用大小。从 Fischer-Tropsch 合成的催化表演测试的结果证明铁锰催化剂对催化剂作文和材料来源敏感过度。当 CH4 和 CO2 由使用从铁(II ) 准备的铁锰催化剂减少了时， C24 轻石蜡增加了，这被发现当 CH4 和 CO2 由使用从铁(II ) 准备的铁锰催化剂减少了时硫酸盐(催化剂) 。催化剂的活动和选择处于不同运作的条件被学习。结果证明为 C24 轻石蜡生产的最好的运作的条件在 260 点是 H2/CO=1/1 (GHSV=2400 h1 )

Effect of Manganese Incorporation Manner on an Iron-Based Catalyst for Fischer-Tropsch Synthesis

A systematic study was undertaken to investigate the effects of the manganese incorporation manner on the textural properties, bulk and surface phase compositions, reduction/carburization behaviors, and surface basicity of an iron-based Fischer-Tropsch synthesis （FTS） catalyst. The catalyst samples were characterized by N2 physisorption, X-ray photoelectron spectroscopy （XPS）, H2 （or CO） temperature-programmed reduction （TPR）, CO2 temperature-programmed desorption （TPD）, and M5ssbauer spectroscopy. The FTS performance of the catalysts was studied in a slurry-phase continuously stirred tank reactor （CSTR）. The characterization results indicated that the manganese promoter incorporated by using the coprecipitation method could improve the dispersion of iron oxide, and decrease the size of the iron oxide crystallite. The manganese incorporated with the impregnation method is enriched on the catalyst＇s surface. The manganese promoter added with the impregnation method suppresses the reduction and carburization of the catalyst in H2, CO, and syngas because of the excessive enrichment of manganese on the catalyst surface. The catalyst added manganese using the coprecipitation method has the highest CO conversion （51.9%） and the lowest selectivity for heavy hydrocarbons （C12＋）.