Efficient degradation of dye pollutants in wastewater via photocatalysis using a magnetic zinc oxide/graphene/iron oxide-based catalyst

In this paper, we present a proof-of-concept study of the enhancement of photocatalytic activity via a combined strategy of fabricating a visible-light responsive ternary heterostructure and improving overall photostability by incorporating magnetic zinc oxide/graphene/iron oxide (ZGF). A solvothermal approach was used to synthesize the catalyst. X-ray diffraction (XRD), scanning electron microscopic, energy dispersive X-ray, transmission electron microscopic, vibrating sample magnetometric, and ultraviolet–visible diffuse reflectance spectroscopic techniques were used to characterize the synthesized samples. The obtained optimal Zn(NO_(3))_(2) concentration, temperature, and heating duration were 0.10 mol/L, 600℃, and 1 h, respectively. The XRD pattern revealed the presence of peaks corresponding to zinc oxide, graphene, and iron oxide, indicating that the ZGF catalyst was effectively synthesized. Furthermore, when the developed ZGF was used for methylene blue dye degradation, the optimum irradiation time, dye concentration, catalyst dosage, irradiation intensity, and solution pH were 90 min, 10 mg/L, 0.03 g/L, 100 W, and 8.0, respectively. Therefore, the synthesized ZGF system could be used as a catalyst to degrade dyes in wastewater samples. This hybrid nanocomposite consisting of zinc oxide, graphene, and iron oxide could also be used as an effective photocatalytic degrader for various dye pollutants.

An amorphous manganese iron oxide hollow nanocube cathode for aqueous zinc ion batteries

Aqueous zinc ion batteries(ZIBs) are attracting considerable attentions for practical energy storage because of their low cost and high safety.Nevertheless,the traditional manganese oxide cathode materials suffer from the low intrinsic electronic conductivity,sluggish ions diffusion kinetics,and structural collapse,hindering their large-scale application.Herein,we successfully developed a latent amorphous Mn_(1.8)Fe_(1.2)O_(4) hollow nanocube(a-H-MnFeO) cathode material derived from Prussian blue analogue precursor.The amorphous nature endows the cathode with lower diffusion barrier and narrower band gap compared with crystalline counterpart,resulting in the superior Zn^(2+) ions and electrons transport kinetics.Hollow structure can furnish abundant surface sites and suppress the structural collapse during the repeated charge/discharge processes.By virtue of the multiple advantageous features,the a-H-MnFeO cathode exhibits exceptional electrochemical performance,in terms of high capacity,excellent rate capability,and prolonged cycle life.This strategy will pave the way for the structural design of emerging cathode materials.

Recent Progress in Superparamagnetic Iron Oxide Nanoparticles

Superparamagnetic iron oxide nanoparticles(SPIONs)have immeasurable potentials in many fields such as nanobiotechnology and biomedical engineering because of their superparamagnetic properties and small particle size.This review introduces the methods for SPIONs synthesis,including co-precipitation,thermal decomposition,microemulsion and hydrothermal reaction,and surface modification of SPIONs with organometallic and inorganic metals,surface modification for targeted drug delivery,and the use of SPIONs as a contrast agent.In addition,this article also provides an overview of recent progress in SPIONs for the treatment of glioma,lung cancer and breast cancer.

Preparation of Sulphur-containing Aromatic Amines by Reduction of the Corresponding Aromatic Nitro Compounds with Hydrazine Hydrate over Iron Oxide Hydroxide Catalyst

Sulphur-containing aromatic nitro compounds were rapidly reduced to the corresponding amines in high yields by employing hydrazine hydrate as a hydrogen donor in the presence of iron oxide hydroxide catalyst. It was worth noting that the catalyst exhibited extremely high activity. The reduction could be completed within 20-50 min and the yields were up to 97-99 %.

Relationship Between Iron Oxides and Surface Charge Characteristics in Soils

The relationship between iron oxides and surface charge characteristics in variable charge soils ( latosol and red earth ) was studied in following three ways. ( 1 ) Remove free iron oxides ( Fed ) and amorphous iron oxides ( Feo ) from the soils with sodium dithionite and acid ammonium oxalate solution respectively. ( 2 ) Add 2% glucose ( on the basis of air-dry soil weight ) to soils and incubate under submerged condition to activate iron oxides, and then the mixtures are dehydrated and air-dried to age iron oxides. ( 3 ) Precipitate various crystalline forms of iron oxides onto kaolinite. The results showed that free iron oxides ( Fed ) were the chief carrier of variable positive charges. Of which crystalline iron oxides ( Fed-Feo ) presented mainly as discrete particles in the soils and could only play a role of the carrier of positive charges, and did little influence on negative charges. Whereas the amorphous iron oxides ( Feo ) , which presented mainly as a coating with a large specific surface area, not only had positive charges, but also blocked the negative charge sites in soils. Submerged incubation activated iron oxides in the soils, and increased the amount of amorphous iron oxides and the degree of activation of iron oxide, which resulted in the increase of positive and negative charges of soils. Dehydration and air-dry aged iron oxides in soils and decreased the amount of amorphous iron oxides and the degree of activation of iron oxide, and also led to the decrease of positive and negative charges. Both the submerged incubation and the dehydration and air-dry had no significant influence on net charges. Precipitation of iron oxides onto kaolinite markedly increased positive charges and decreased negative charges. Amorphous iron oxide having a larger surface area contributed more positive charge sites and blocked more negative charge sites in kaolinite than crystalline goethite.

Chitosan—The Application of a Natural Polymer against Iron Hydroxide Deposition

As a consequence of mining, heavy metal ions can be exposed to the environment hence contaminate ground water and surface water amongst others. The natural polymer chitosan was proved to be an excellent adsorber material for the effective removal of iron and sulfate ions in batch as well as in column experiments. The adsorption behavior of iron ions, as well as sulfate ions was investigated by utilizing chitosan flakes as a natural adsorbent. The removal was studied using adsorbance measurements, SEM and SEM-EDX. The adsorption capacity of chitosan was determined at different times. The received adsorption capacities for iron ions were very promising with a maximum adsorption capacity of 85 mg/g and a rate of separation of 100%. The maximum adsorption capacity obtained for sulfate ions was 188.8 mg/g and a rate of 80%.

Magnetic labeling of primary murine monocytes using very small superparamagnetic iron oxide nanoparticles

Due to their very small size,nanoparticles can interact with all cells in the central nervous system.One of the most promising nanoparticle subgroups are very small superparamagnetic iron oxide nanoparticles(VSOP)that are citrate coated for electrostatic stabilization.To determine their influence on murine blood-derived monocytes,which easily enter the injured central nervous system,we applied VSOP and carboxydextran-coated superparamagnetic iron oxide nanoparticles(Resovist).We assessed their impact on the viability,cytokine,and chemokine secretion,as well as iron uptake of murine blood-derived monocytes.We found that(1)the monocytes accumulated VSOP and Resovist,(2)this uptake seemed to be nanoparticle-and time-dependent,(3)the decrease of monocytes viability was treatment-related,(4)VSOP and Resovist incubation did not alter cytokine homeostasis,and(5)overall a 6-hour treatment with 0.75 mM VSOP-R1 was probably sufficient to effectively label monocytes for future experiments.Since homeostasis is not altered,it is safe to label blood-derived monocles with VSOP.VSOP labeled monocytes can be used to study injured central nervous system sites further,for example with drug-carrying VSOP.

Preparation of Superparamagnetic Dextran-coated Iron Oxide Nanoparticles used as a Novel Gene Carrier into Human Bladder Cancer Cells'

Objective: Application of magnetic nanoparticles as gene carrier in gene therapy has developed quickly. This study was designed to investigate the preparation of superparamagnetic dextran-coated iron oxide nanoparticles (SDION) and the feasibility of SDION used as a novel gene carrier for plasmid DNA in vitro. Methods: SDION were prepared by chemical coprecipitation and separated by gel filtration on Sephacryl S-300HR, characterized by TEM, laser scattering system and Vibrating Sample Magnetometer Signal Processor. The green fluorescent protein (pGFP-C2) plasmid DNA was used as target gene. SDION-pGFP-C2 conjugate compounds were produced by means of oxidoreduction reaction. The connection ratio of SDION and pGFP-C2 DNA was analyzed and evaluated by agarose electrophoresis and the concentration of pGFP-C2 in supernatant was measured. Using liposome as control, the transfection efficiency of SDION and liposome was respectively evaluated under fluorescence microscope in vitro. Results: The diameter of SDION ranges from 3 nm to 8 nm, the effective diameter was 59.2 nm and the saturation magnetization was 0.23 emu/g. After SDION were reasonably oxidized, SDION could connect with pGFP-C2 to a high degree. The transfection efficiency of SDION as gene carrier was higher than that of liposome. Conclusion: The successes in connecting SDION with pGFP-C2 plasmid by means of oxidoreduction reaction and in transferring pGFP-C2 gene into human bladder cancer BIU-87 cells in vitro provided the experimental evidence for the feasibility of SDION used as a novel gene carrier.

Reduction kinetics of iron oxide pellets with H_2 and CO mixtures

Reduction of hematite pellets using H2-CO mixtures with a wide range of H2/CO by molar （1：0, 3：1, 1：1, 1：3, and 0：1） at different reducing temperatures （1073, 1173, and 1273 K） was conducted in a program reducing furnace. Based on an unreacted core model, the effective diffusion coefficient and reaction rate constant in several cases were determined, and then the rate-control step and transition were analyzed. In the results, the effective diffusion coefficient and reaction rate constant increase with the rise in temperature or hydrogen content. Reduction of iron oxide pellets using an H2-CO mixture is a compound control system; the reaction rate is dominated by chemical reaction at the very beginning, competition during the reduction process subsequently, and internal gas diffusion at the end. At low hydrogen content, increasing temperature takes the transition point of the rate-control step to a high reduction degree, but at high hydrogen content, the effect of temperature on the transition point weakens.

Ceramsite Containing Iron Oxide and its Use as Functional Aggregate in Microwave Absorbing Cement-based Materials

Electromagnetic（EM） wave absorbing cement-based composite has promising applications in protecting civil and military buildings from electromagnetic interferences. A new idea of preparing EM wave absorbing cement-based composite is proposed by using ceramsite containing iron oxide as EM wave absorbing functional aggregate. The ceramsite was synthesized by adding 10 wt% Fe3O4 into clay and sintering at 1 200 ℃, which shows obvious dielectric and magnetic loss properties for electromagnetic wave. The maximum reflection loss（RL） of the concrete specimens prepared with the ceramsite is between-10.2--10.7 dB（corresponding to absorption greater than 90% EM energy） in the bandwidth of 8-18 GHz. In addition, the compressive strength at 28 days age of the concrete is 46 MPa, showing the potentiality of being used as structural components in buildings.

Study on Kinetics of Iron Oxide Reduction by Hydrogen

Kinetics parameters of iron oxide reduction by hydrogen were evaluated by the isothermal method in a differential micro-packed bed. Influence of external diffusion, internal diffusion and heat transfer on the intrinsic reaction rate was investigated and the conditions free of internal and external diffusion resistance have been determined. In the experiments, in order to correctly evaluate the intrinsic kinetics parameters for reducing Fe203 to Fe3O4, the reaction temperatures were set between 440 ℃ and 490 ℃. However, in order to distinguish the reduction of Fe304 to FeO from that of FeO to Fe, the reaction temperature in the experiment was set to be greater than 570 ℃. Intrinsic kinetics of iron oxide reduction by hydrogen was established and the newly established kinetic models were validated by the experimental data.

Characterization of Iron Oxide Generated in Ruthner Plant of Pickling Unit in Mobarakeh Steel Complex

Reducing the chloride content in regenerated iron oxides (RIO) from steel-pickling acid waste economically treated by Ruthner process is the most critical issue for the development of RIO as a useful raw material resource. In this paper, the results of a new method for characterization and modification of RIO produced in Mobarakeh Steel Complex were reported.

Staged reaction kinetics and characteristics of iron oxide direct reduction by carbon

Staged reduction kinetics and characteristics of iron oxide direct reduction by carbon were studied in this work. The characteristics were investigated by simultaneous thermogravimetric analysis, X-ray diffraction（XRD）, and quadrupole mass spectrometry. The kinetics parameters of the reduction stages were obtained by isoconversional（model-free） methods. Three stages in the reduction are Fe2O3→Fe3O4, Fe3O4→Fe O, and Fe O→Fe, which start at 912 K, 1255 K, and 1397 K, respectively. The CO content in the evolved gas is lower than the CO2content in the Fe2O3→Fe3O4stage but is substantially greater than the CO2 contents in the Fe3O4→Fe O and Fe O→Fe stages, where gasification starts at approximately 1205 K. The activation energy（E） of the three stages are 126–309 k J/mol, 628 k J/mol, and 648 k J/mol, respectively. The restrictive step of the total reduction is Fe O→Fe. If the rate of the total reduction is to be improved, the rate of the Fe O→Fe reduction should be improved first. The activation energy of the first stage is much lower than those of the latter two stages because of carbon gasification. Carbon gasification and FexOy reduction by CO, which are the restrictive step in the last two stages, require further study.

Effects of Catalyst and Additive Containing Li, Na, or Ca on Reduction of Iron Oxide/Carbon Composite Pellets

The catalyst containing 0.69% (mass fraction) of Li+, Na+, or Ca2+ were synthesized, and the catalytic effect on the reduction of iron oxide/carbon composite pellets were investigated by comparing with that of additive at 850 degreesC. The effect of the catalyst was greater than that of the additive, it can be considered that catalyst promoted the formation of iron nucleus early on reduction processes of iron oxide/carbon composite pellets. In addition, both effects of catalyst and additive increased after added carbon powder into the pellets, but the extent of increase decreased when the carbon powder exceeded a suitable content (about 4%), this amount is less than that of carbon needed theoretically on the reduction from hematite to iron.

Dissolution kinetics of iron oxides in clay in oxalic acid solutions

Clay samples containing 8.15% iron oxides and 27.49% alumina were leached in oxalic acid. Leaching experiments were per-formed in aqueous solutions of oxalic acid of 0.2-2 mol/L at 40-80 C for up to 90 min. The mixed kinetic mechanism, i.e., t/τ=[（1 2X/3） （1 X）2/3 ]＋b[ 1 （1 X）1/3], seemed to be the most appropriate one to fit the kinetic data of leaching iron oxides contained in clay in the aqueous oxalic acid solutions. The Arrhenius activation energy for leaching in the 1.8 mol/L oxalic acid was found to be 41.035 kJ/mol.

Column adsorption of Cu(Ⅱ) by polymer-supported nano-iron oxides in the presence of sulfate: Experimental and mathematical modeling

Polymer-supported hydrous iron oxides(HFOs) are promising for heavy metals removal from aqueous systems.The ubiquitous inorganic ligands, e.g., sulfate, are expected to exert considerable impacts on pollutants removal by these hybrid sorbents. Herein, we obtained a hybrid sorbent HFO-PS by encapsulating nanosized HFO into macroporous polystyrene(PS) resin. Both batch and column sorption experiments of Cu(Ⅱ) by HFO-PS were carried out in the presence of sulfate. Obviously, the presence of sulfate is favorable for Cu(Ⅱ) sorption onto HFO-PS.The performances of column Cu(Ⅱ) removal were fitted and predicted with Adams–Bohart, Clark, Thomas and BDST models. Thomas model is suggested best-fit to predict the breakthrough curves. Besides, a linear correlation is observed between breakthrough time and column length based on BDST model, which might be useful for predicting the breakthrough time for Cu(Ⅱ) removal by HFO-PS.

Highly Efficient Labeling of Human Lung Cancer Cells Using Cationic Poly-L-lysine-Assisted Magnetic Iron Oxide Nanoparticles

Cell labeling with magnetic iron oxide nanoparticles(IONPs)is increasingly a routine approach in the cellbased cancer treatment.However,cell labeling with magnetic IONPs and their leading effects on the biological properties of human lung carcinoma cells remain scarcely reported.Therefore,in the present study the magnetic c-Fe2O3nanoparticles(MNPs)were firstly synthesized and surface-modified with cationic poly-L-lysine(PLL)to construct the PLL-MNPs,which were then used to magnetically label human A549 lung cancer cells.Cell viability and proliferation were evaluated with propidium iodide/fluorescein diacetate double staining and standard 3-(4,5-dimethylthiazol-2-diphenyl-tetrazolium)bromide assay,and the cytoskeleton was immunocytochemically stained.The cell cycle of the PLL-MNPlabeled A549 lung cancer cells was analyzed using flow cytometry.Apoptotic cells were fluorescently analyzed with nuclear-specific staining after the PLL-MNP labeling.The results showed that the constructed PLL-MNPs efficiently magnetically labeled A549 lung cancer cells and that,at low concentrations,labeling did not affect cellular viability,proliferation capability,cell cycle,and apoptosis.Furthermore,the cytoskeleton in the treated cells was detected intact in comparison with the untreated counterparts.However,the results also showed that at high concentration(400 lg m L-1),the PLL-MNPs would slightly impair cell viability,proliferation,cell cycle,and apoptosis and disrupt the cytoskeleton in the treated A549 lung cancer cells.Therefore,the present results indicated that the PLL-MNPs at adequate concentrations can be efficiently used for labeling A549 lung cancer cells and could be considered as a feasible approach for magnetic targeted anti-cancer drug/gene delivery,targeted diagnosis,and therapy in lung cancer treatment.

Effect of Calcium Oxide Additive on the Performance of Iron Oxide Sorbent for High-Temperature Coal Gas Desulfurization

The effect of calcium oxide additive in iron oxide sorbent for hot gas desulfurization was investigated by XRD and TPR techniques.XRD characterization showed that CaO was highly dispersed after the calcination of sorbents.Calcium sulfate formed in the desulfurization was decomposed and regenerated to CaO by reacting with CO before the next sulfidation process.Calcium participated in every sulfidation/regeneration cycle and contributed to the enhancement of sulfur capacity.The TPR results showed that the reduction temperature of the sorbent increased with the increase of the content of calcium.Calcium played a role of retarding reduction.Therefore,the addition of calcium oxide additive will benefit the utilization of iron oxide sorbent in strongly reducing atmospheres.

Tailoring the surface structures of iron oxide nanorods to support Au nanoparticles for CO oxidation

Iron oxide supported Au nanomaterials are one of the most studied catalysts for low-temperature CO oxidation.Catalytic performance not only critically depends on the size of the supported Au nanoparticles(NPs)but also strongly on the chemical nature of the iron oxide.In this study,Au NPs supported on iron oxide nanorods with different surface properties throughβ-FeOOH annealing,at varying temperatures,were synthesized,and applied in the CO oxidation.Detailed characterizations of the interactions between Au NPs and iron oxides were obtained by X-ray diffraction,transmission electron microscopy(TEM),and X-ray photoelectron spectroscopy.The results indicate that the surface hydroxyl group on the Au/FeOOH catalyst,before calcination(Au/FeOOH-fresh),could facilitate the oxygen adsorption and dissociation on positively charged Au,thereby contributing to the low-temperature CO oxidation reactivity.After calcination at 200℃,under air exposure,the chemical state of the supported Au NP on varied iron oxides partly changed from metal cation to Au0,along with the disappearance of the surface OH species.Au/FeOOH with the highest Au0 content exhibits the highest activity in CO oxidation,among the as-synthesized catalysts.Furthermore,good durability in CO oxidation was achieved over the Au/FeOOH catalyst for 12 h without observable deactivation.In addition,the advanced identical-location TEM method was applied to the gas phase reaction to probe the structure evolution of the Au/iron oxide series of the catalysts and support structure.A Au NP size-dependent Ostwald ripening process mediated by the transport of Au(CO)x mobile species under certain reaction conditions is proposed,which offers a new insight into the validity of the structure-performance relationship.

In Vitro Targeted Magnetic Delivery and Tracking of Superparamagnetic Iron Oxide Particles Labeled Stem Cells for Articular Cartilage Defect Repair

To assess a novel cell manipulation technique of tissue engineering with respect to its ability to augment superparamagnetic iron oxide particles （SPIO） labeled mesenchymal stem cells （MSCs） density at a localized cartilage defect site in an in vitro phantom by applying magnetic force. Meanwhile, non-invasive imaging techniques were use to track SPIO-labeled MSCs by magnetic resonance imaging （MRI）. Human bone marrow MSCs were cultured and labeled with SPIO. Fresh degenerated human osteochondral fragments were obtained during total knee arthroplasty and a cartilage defect was created at the center. Then, the osteochondral fragments were attached to the sidewalls of culture flasks filled with phosphate-buffered saline （PBS） to mimic the human joint cavity. The SPIO-labeled MSCs were injected into the culture flasks in the presence of a 0.57 Tesla （T） magnetic force. Before and 90 min after cell targeting, the specimens underwent T2-weighted turbo spin-echo （SET2WI） sequence of 3.0 T MRI. MRI results were compared with histological findings. Macroscopic observation showed that SPIO-labeled MSCs were steered to the target region of cartilage defect. MRI revealed significant changes in signal intensity （P0.01）. HE staining exibited that a great number of MSCs formed a three-dimensional （3D） cell ＂sheet＂ structure at the chondral defect site. It was concluded that 0.57 T magnetic force permits spatial delivery of magnetically labeled MSCs to the target region in vitro. High-field MRI can serve as an very sensitive non-invasive technique for the visualization of SPIO-labeled MSCs.