Study on the Effectiveness of Circulation Well for Remediation of Benzene and Toluene Contaminated Silt Sand Aquifer

In order to investigate the remediation effect of groundwater circulation well on benzene and toluene contaminated silt sand aquifer,a simulation remediation experiment was conducted in the laboratory using a two-dimensional simulation tank.The results showed that in the silt sand aquifer,the concentrations of benzene and toluene decreased from 179.210 mg/L and 327.520 mg/L to below the detection limit after 24 h of operation of the circulation well.The closer to the circulation well in the horizontal direction,the faster the removal efficiency of benzene and toluene.The study has shown that circulating wells have good remediation effects on both benzene-and toluene-contaminated chalk sand aquifers.

Enabling tandem oxidation of benzene to benzenediol over integrated neighboring V-Cu oxides in mesoporous silica

The direct tandem oxidation synthesis of benzenediol from benzene could simplify or even avoid the separation and purification of reaction intermediates, which is promising but challenged because of the further required immediate consecutive activation of intermediate phenol. In this work, a synergistic benzene tandem-oxidation catalyst that V-Cu bimetallic oxides modified nanoporous silica(VCu-NS)was constructed via a facile assembly strategy which involves addictive negative anion citric acid mediating the intercalation of metal-citric acid chelate in mesopore of silica and subsequent thermal calcination inducing dual-metal active site formation. Such a tactic could make amorphous VOxspecies well covered on the surface of mesopore, and ultrafine copper oxide particles surrounded and neighbored by highly dispersed VOxwith strong interplay in mesopore, which was comprehensively confirmed by various characterizations. Benefiting from the unique V-Cu neighboring effect, the desorption of formed phenol over the catalytic site might be restricted therefore easily further activated by the formed reactive oxidative species, 3VCu-NS shows synergetic tandem-oxidation catalytic activities for benzene towards benzenediol with a selectivity of 57%. The result allows optimal 3VCu-NS to be a promising catalyst for benzenediol synthesis from benzene.

Understanding the interfacial behaviors of benzene alkylation with butene using chloroaluminate ionic liquid catalyst: A molecular dynamics simulation

To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl chain length and different anions were investigated using molecular dynamics(MD) simulations. The results indicate that ILs can obviously improve the interfacial width, solubility and diffusion of reactants compared to H_(2)SO_(4). The longer alkyl chains of cations present a density enrichment at the interface and protrude into the binary reactants phase. Furthermore, the ILs consisting of 1-octyl-3-methylimidazolium cations([Omim]^(+)) and the stronger acidity heptachlorodialuminate anions([Al_(2)Cl_(7)]^(-)) are more beneficial to promote the interfacial width and facilitate the dissolution and diffusion of benzene in both the IL bulk and the interfacial region in comparison to the ones with shorter alkyl chains cations and weaker acidity anions. The information gives us a better guideline for the design of ILs for benzene alkylation.

Vanadium supported on graphitic carbon nitride as a heterogeneous catalyst for the direct oxidation of benzene to phenol

A series of graphitic carbon nitride supported vanadium catalysts（xV/g-C3N4） with different vanadium contents（x/%） were prepared by impregnation.XRD,FT-IR,TEM,TG-DTG,nitrogen adsorption and XPS characterizations were conducted which revealed a strong interaction between the vanadium species and g-C3N4 support.8V/g-C3N4 exhibited the highest activity and showed stable recyclability in the benzene hydroxylation reaction with a benzene conversion of 24.6%and phenol selectivity of 99.2%under the optimized conditions.The excellent catalytic performance of xV/g-C3N4 was due to the integration of vanadium species with high catalytic activity and the g-C3N4support in their interaction with the benzene substrate.

Benzene and Toluene Levels Measured with DOAS During Vehicular Restrictions in Beijing

Measurements of atmospheric benzene and toluene were carried out continuously using dif- ferential optical absorption spectroscopy from August 7 to August 28 in Beijing during the period of vehicular restrictions. The correlations between traffic flows and totals of benzene and toluene were studied during the period of vehicular traffic restrictions from August 17 to August 20 and non-traffic restrictions on August 16 and August 21. The correlation coef- ficient was 0.8 between benzene and toluene. And the calculated daily mean value ratios of benzene to toluene were 0.43-0.50. During the period of vehicular restrictions, traffic flows were reduced about 11.8% and the levels of benzene and toluene were reduced by 11.4% and 12.8%, respectively. The vehicle emissions were recognized as the major sources for atmospheric benzene and toluene in Beijing.

Effect of Excited-state Substituent Constant on the UV Spectra of 1,4-disubstituted Benzenes

A correlation equation between the UV absorption wavenumbers of 1,4-disubstituted benzenes and the excited-state substituent constant was obtained. For 80 sorts of 1,4- disubstituted benzenes, the correlation coefficient was 0.9805, and the standard deviation was only 672.27 cm^-1. The results imply that the excited-state substituent constant can be used productively for research on UV energy of 1,4-disubstituted benzenes. The present method provides a new avenue to study the UV absorption spectra of aromatic systems with the excited-state substituent constant, and it is helpful to understand the effect of substituent electrostatic effects on the chemical and physical properties of conjugated compounds with multiple substituents in excited state.

Photoionization Mass Spectrometric and Kinetic Modeling of Low-pressure Pyrolysis of Benzene

Pyrolysis of benzene at 30 Torr was studied from 1360 K to 1820 K in this work. Synchrotron vacuum ultraviolet photoionization mass spectrometry was employed to detect the pyroly- sis products such as radicals, isomers and polycyclic aromatic hydrocarbons, and measure their mole fraction profiles versus temperature. A low-pressure pyrolysis model of benzene was developed and validated by the experimental results. Rate of production analysis was performed to reveal the major reaction networks in both fuel decomposition and aromatic growth processes. It is concluded that benzene is mainly decomposed via H-abstraction reaction to produce phenyl and partly decomposed via unimolecular decomposition reac- tions to produce propargyl or phenyl. The decomposition process stops at the formation of acetylene and polyyne species like diacetylene and 1,3,5-hexatriyne due to their high thermal stabilities. Besides, the aromatic growth process in the low-pressure pyrolysis of benzene is concluded to initiate from benzene and phenyl, and is controlled by the even carbon growth mechanism due to the inhibited formation of C5 and C7 species which play important roles in the odd carbon growth mechanism.

配合物Benzene-I_2结构的从头算研究

采用分子轨道从头算方法,对苯用6-311+G 基组,对碘分子用相对论的有效核实势(RECP5s25p5),以及用密度函数方法(B3LYP),计算了配合物Benzene I2可能构形(7种)的结构,总能量和振动频率。经过筛选,同属Cs点群的两种结构是Benzene I2的稳定结构。自然键轨道(NBO)分析表明,配合物Benzene I2主要是由于苯环的π电子和碘分子的最低空轨道(LUMO)σ 轨道之间的相互作用形成的。本文还给出了这两种结构的势能曲线,并且用含四项Morse函数和一项C6R-6的势能函数进行曲线拟合,给出了相应的拟合参数。

Production of Benzene from Lignin through Current Enhanced Catalytic Conversion

The directional production of benzene is achieved by the current-enhanced catalytic conversion of lignin. The synergistic effect between catalyst and current promotes the depolymerization of lignin and the selective recombinant of the functional groups in the aromatic monomers. A high benzene yield of 175 gbenzene/kglignin was obtained with an excellent selectivity of 92.9 C-mol%. The process potentially provides a promising route for the production of basic petrochemical materials or high value-added chemicals using renewable biomass.

Assessment of Some Density Functional Theory Methods and Force Field Models in Describing Various Interaction Modes of Benzene Dimer

Benzene dimer （bz2） is the simplest prototype of the π-π interactions. Such interactions are ubiquitous in diverse areas of science and molecular engineering. In the present work, we have made assessment on some modern density functional methods including B97-D, BLYP-D3, M06-2X, XYG3, and force field models including CHARMM, AMBER, MM3, AMOEBA on six important interaction modes of bz2. Our results not only highlight the usefulness of these cost-effective methods, which can be used as economic substitutes of the expensive CCSD（T） for complex real-world systems, but also indicate their weakness in the description of the π-π interactions, which points to the future direction for further improvements.

Benzene alkylation with methanol over phosphate modified hierarchical porous ZSM-5 with tailored acidity

The acidity and acid distribution of hierarchical porous ZSM-5 were tailored via phosphate modification. The catalytic results showed that both benzene conversion and selectivity of toluene and xylene increased with the presence of appropriate amount of phosphorus. Meanwhile, side reactions such as methanol to olefins related with the formation of by-product ethylbenzene formation and isomerization of xylene to meta-xylene were suppressed efficiently. The acid strength and sites amount of Br?nsted acid of the catalyst were crucial for improving benzene conversion and yield of xylene, whereas passivation of external surface acid sites played an important role in breaking thermodynamic equilibrium distribution of xylene isomers.

Alkylation Activity of Benzene with Syngas over Cu-based Catalysts

A series of Cu-based catalysts were developed for alkylation of benzene with syngas. The catalyst samples were prepared by the impregnation method, and were characterized by XRD, XRF, NH3-TPD, and TEM and evaluated in a fixed bed reactor. The optimized reaction temperature of Cu/Al2O3/ZSM-5 catalyst was 350 ℃, while higher contents of copper were conducive to alkylation of benzene with syngas. The new medium strength acid centers in the catalyst created by Cu were beneficial to alkylation. Hydrogenation reaction of CO was executed on the metal centers without dissociation, Dimethyl ether(DME) was the major intermediate over Cu-based catalysts. Higher selectivity of methylation and lower selectivity of heavy aromatics were confirmed after the second metal(Zn, Mn, or V) was added to the copper catalyst. Cu was partly covered by Zn in the Cu-Zn/Al2O3/ZSM-5 catalyst leading to low dispersion and low activity of copper. Cu-Mn/Al2O3/ZSM-5 catalyst possessed the best yield of methylation product. Cu-Mn composite oxides were probably formed in fresh catalyst, which blocked the sintering of Cu in the reaction process. The loading of Cu decreased dramatically after the introduction of V, while causing an increase of the amount of medium strength acid centers at the same time. V prevented the sintering of copper particles during the reducing process and had a promoting effect on the activity of Cu.

Highly selective ethylbenzene production through alkylation of dilute ethylene with gas phase-liquid phase benzene and transalkylation feed

A novel industrial process was designed for the highly selective production of ethylbenzene. It comprised of a reactor vessel, vapor phase ethylene feed stream, benzene and transalkylation feed stream. Especially the product stream containing ethylbenzene was used to heat the reactor vessel, which consisted of an alkylation section, an upper heat exchange section, and a bottom heat exchange section. In such a novel reactor, vapor phase benzene and liquid phase benzene were coexisted due to the heat produced by isothermal reaction between the upper heat exchange section and the bottom heat exchange section. The process was demonstrated by the thermodynamic analysis and experimental results. In fact, during the 1010 hour-life-test of gas phase ethene with gas phase-liquid phase benzene alkylation reaction, the ethene conversion was above 95%, and the ethylbenzene selectivity was above 83% （only benzene feed） and even higher than 99% （benzene plus transalkylation feed）. At the same time, the xylene content in the ethylbenzene was less than 100 ppm when the reaction was carried out under the reaction conditions of 140-185℃ of temperature, 1.6-2.1 MPa of pressure, 3.0-5.5 of benzene/ethylene mole ratio, 4-6 v% of transalkylation feed/（benzene＋transalkylation feed）, 0.19-0.27 h^-1 of ethene space velocity, and 1000 g of 3998 catalyst loaded. Thus, compared with the conventional ethylbenzene synthesis route, the transalkylation reactor could be omitted in this novel industrial process.

Deactivation mechanism of beta-zeolite catalyst for synthesis of cumene by benzene alkylation with isopropanol

The alkylation of benzene with isopropanol over beta-zeolite is a more cost-effective solution to cumene production. During the benzene alkylation cycles, the cumene selectivity slowly increased, while the benzene conversion presented the sharp decrease due to catalyst deactivation. The deactivation mechanism of betazeolite catalyst was investigated by characterizing the fresh and used catalysts. The XRD, SEM and TEM results show that the crystalline and particle size of the beta-zeolite catalyst almost remained stable during the alkylation cycles. The drop in catalytic activity and benzene conversion could be explained by the TG, BET,NH_3-TPD and GC–MS results. The organic matters mainly consisted of ethylbenzene, p-xylene and 1-ethyl-3-(1-methyl) benzene produced in the benzene alkylation deposited in the catalyst, which strongly reduced the specific surface area of beta-zeolite catalyst. Moreover, during the reaction cycles, the amount of acidity also significantly decreased. As a result, the catalyst deactivation occurred. To maintain the catalytic performance,the catalyst regeneration was carried out by using ethanol rinse and calcination. The deactivated catalyst could be effectively regenerated by the calcination method and the good catalytic performance was obtained.

Studies on the Mechanism of the Direct Synthesis of Styrene form Benzene and Ethylene

The adsorption behavior and description behavior of benzene , ethylene and ethylbenzene over HZSM-5 and Co/HZSM-5 catalysts were studied by means of TPSR (Temperature programmed surface reaction) technique. TPSR results of ben- zene and ethylene co-adsorption show that the maian products are styrene , ethylben- zene, toluene, propane, and butane. In a separate experiment of ethylbenzene ad- sorption, styrene . toluene and benzene are formed due to cracking and dehydro- genation. The mechanism of styrene formation was proposed , i. e. , the reaction was carried out via. the dehydrogenation of mediate species ethylbenzene according to the results of TPSR-MS , activity testing and thermodynamic analysis.

Study of Humidity Effect on Benzene Decomposition by the Dielectric Barrier Discharge Nonthermal Plasma Reactor

The humidity effects on the benzene decomposition process were investigated by the dielectric barrier discharge（DBD） plasma reactor.The results showed that the water vapor played an important role in the benzene oxidation process.It was found that there was an optimum humidity value for the benzene removal efficiency,and at around 60% relative humidity（RH）,the optimum benzene removal efficiency was achieved.At a SIE of 378 J/L,the removal efficiency was 66% at 0% RH,while the removal efficiency reached 75.3% at 60% RH and dropped to 69% at 80% RH.Furthermore,the addition of water inhibited the formation of ozone and NO2 remarkably.Both of the concentrations of ozone and NO2 decreased with increasing of the RH at the same specific input energy.At a SIE of 256 J/L,the concentrations of ozone and NO2 were 5.4 mg/L and 1791 ppm under dry conditions,whereas they were only 3.4 mg/L and 1119 ppm at 63.5%RH,respectively.Finally,the outlet gas after benzene degradation was qualitatively analyzed by FT-IR and GC-MS to determine possible intermediate byproducts.The results suggested that the byproducts in decomposition of benzene primarily consisted of phenol and substitutions of phenol.Based on these byproducts a benzene degradation mechanism was proposed.

Study on the Nanosized Amorphous Ru-Fe-B/ZrO_2 Alloy Catalyst for Benzene Selective Hydrogenation to Cyclohexene

A novel nanosized amorphous Ru-Fe-B/ZrO2 alloy catalyst for benzene selective hydrogenation to cyclohexene was investigated. The superior properties of this catalyst were attributed to the combination of the nanosize and the amorphous character as well as to its textural character. In addition, the concentration of zinc ions, the content of ZrO2 in the slurry, and the pretreatment of the catalyst were found to be effective in improving the activity and the selectivity of the catalyst.

Selective hydrogenation of benzene to cyclohexene on Ru-based catalysts promoted with Mn and Zn

Ru-based catalysts promoted with Mn and Zn were prepared by a co-precipitation method. In liquid-phase hydrogenation of benzene, the Ru-Mn-Zn catalysts exhibited superior catalytic performance to the catalysts promoted with Zn or Mn alone. The optimum Mn/Zn molar ratio was determined to be 0.3. With the addition of 0.5 g NaOH, the Ru-Mn-Zn-0.3 catalyst, which was reduced at 150 ？ C, afforded a cyclohexene selectivity of 81.1% at a benzene conversion of 60.2% at 5 min and a maximum cyclohexene yield of 59.9% at 20 min. Based on characterizations, the excellent performance of Ru-Mn-Zn catalyst was ascribed to the suitable pore structure, the appropriate reducibility and the homogenous chemical environment of the catalyst.

Effect of Lanthanum on Performance of RuB Amorphous Alloy Catalyst for Benzene Selective Hydrogenation

The effect of La on the performance of a supported RuB amorphous alloy catalyst for benzene selective hydrogenation was studied by means of activity and selectivity tests, such as HRTEM, SAED, XPS, and XRD. The results show that the addition of La to RuB amorphous alloy catalyst can evidently increase the activity and improve the thermal stability of RuB amorphous alloy to refrain its crystallization. The promoting effect of La on the activity of RuB amorphous alloy catalyst is because of the high dispersion of the active components.

Selective hydrogenation of benzene to cyclohexene over Ce-promoted Ru catalysts

Ru-Ce catalysts were prepared by a co-precipitation method.The effects of Ce precursors with different valences and Ce contents on the catalytic performance of Ru-Ce catalysts were investigated in the presence of ZnSO4.The Ce species in the catalysts prepared with different valences of the Ce precursors all exist as CeO2 on the Ru surface.The promoter CeO2alone could not improve the selectivity to cyclohexene of Ru catalysts.However,almost all the CeO2 in the catalysts could react with the reaction modifier ZnSO4 to form(Zn(OH)2)3(ZnSO4)(H2O)3 salt.The amount of the chemisorbed salt increased with the CeO2 loading,resulting in the decrease of the activity and the increase of the selectivity to cyclohexene of Ru catalyst.The Ru-Ce catalyst with the optimum Ce/Ru molar ratio of 0.19 gave a maximum cyclohexene yield of 57.4%.Moreover,this catalyst had good stability and excellent reusability.