Isomorphous Substitution of Metallic Elements for Zeolite Y in the Aqueous Solution

The substitutions of Ti, Fe and Zr into zeolite Y in the aqueous solutions of (NH4)2TiF6, (NH4)3ZrF7 and (NH4)3FeF6 were systematically Investigated. It was found that Ai atoms in the framework can be replaced by some metallic elements and the extent of substitution depends on the M/A1 ratio of the solution. The maximum allowable M/A1 ratio of the aqueous solution Is related with the radius of the M atom and the stability constant of the MFnm- complex. The substituted zeolite samples with crystallinity greater than 80% were characterized by means of XRD, IR, DTA, TPR and NH3-TPD measurements. The incorporation of Ti, Fe and Zr into the zeolite leads to an increase in the unit cell parameter, a lowering of thermal stability and a red shift of the asymmetric stretching frequency. The extent of these changes is apparently related with the ionic radius of the metallic element and the degree of substitution. The results of various characterization methods show that the het-eroatoms are readily Introduced into the zeolite framework by this preparation method. It was also observed that the substitution of heteroatoms may strengthen or weaken the surface acidity of zeolite Y.

Isomorphous Substitution of Aluminium for Gallium in a Framework Gallophosphate

An aluminium-substituted framework gallophosphate with occluded triethylamine was synthesized hydrothermally. 27Al MAS NMR spectroscopy indicates that only the tetrahedral coordinated gallium atoms in the gallophosphate are substituted by aluminium atoms. The substitution leads to an evident decrease in cell volume of the crystal. The differences between the original gallophosphate and the aluminium-substituted one are also found for the IR spectrum and the thermal property.

Aromatization over nanosized Ga-containing ZSM-5 zeolites prepared by different methods:Effect of acidity of active Ga species on the catalytic performance

Nanosized Ga-containing ZSM-5 zeolites were prepared via isomorphous substitution and impregnation followed by characterized using various techniques. The catalytic performance of the zeolites for the aromatization of 1-hexene was investigated. The results indicate that isomorphous substitution promotes the incorporation of Ga heteroatoms into the framework along with the formation of extra-framework GaO;species（[GaO;]a） that have stronger interactions with the negative potential of the framework. In addition, based on the Py-IR results and catalytic performance, the [GaO;]aspecies with stronger Lewis acid sites produced a better synergism with moderate Br?nsted acid sites and thus improved the selectivity to aromatic compounds. However, the impregnation results in the formation of Ga;O;phase and small amounts of GaO;species that are mainly located on the external surface（[GaO;];）, which contribute to weaker Lewis acid sites due to weaker interactions with the zeolite framework. During 1-hexene aromatization, the nanosized Ga isomorphously substituted ZSM-5 zeolite samples（Gax-NZ5） exhibited better catalytic performance compared to the impregnated samples, and the highest aromatic yield（i.e.,65.4 wt%） was achieved over the Ga4.2-NZ5 sample, which contained with the highest Ga content.

Selective reduction of carbon dioxide into amorphous carbon over activated natural magnetite

Natural magnetite formed by the isomorphism substitutions of transition metals,including Fe,Ti,Co,etc.,was activated by mechanical grinding followed by H2 reduction.The temperature-programmed reduction of hydrogen(H2-TPR)and temperature-programmed surface reaction of carbon dioxide(CO2-TPSR)were carried out to investigate the processes of oxygen loss and CO2 reduction.The samples were characterized by X-ray diffraction(XRD),field emission scanning electron microscopy(FE-SEM),and energy-dispersive X-ray spectroscopy(EDS).The results showed that the stability of spinel phases and oxygen-deficient degree significantly increased after natural magnetite was mechanically milled and reduced in H2 atmosphere.Meanwhile,the activity and selectivity of CO2 reduction into carbon were enhanced.The deposited carbon on the activated natural magnetite was confirmed as amorphous.The amount of carbon after CO2 reduction at 300°C for 90 min over the activated natural magnetite was 2.87wt%higher than that over the natural magnetite.

An Experimental Study of the Performance of Isomorphically Zirconium-Substituted Mesoporous Alumina Supported Cobalt Catalysts in Fischer-Tropsch Synthesis

A series of mesoporous alumina (MA) supported cobalt (Co/MA) catalysts with MA isomorphically substituted by zirconium (Zr) were synthesised and evaluated for their performance in the Fischer-Tropsch synthesis. The Zr/(Zr + Al) atomic ratios varied from 1% - 15%. A zirconium-impregnated Co/MA catalyst prepared by wet impregnation with a Zr/(Zr + Al) atomic ratio of 5% was also evaluated to examine Zr incorporation’s effect method. The catalysts synthesised were characterised using N2 adsorption-desorption, X-ray Powder Diffraction (XRD), Transmission Electron Microscopy (TEM), and X-Ray Photoelectron Spectroscopy (XPS). It was found that Zr4+ ions were incorporated into the framework of MA and kept intact up to a Zr/(Zr + Al) atomic ratio of 5%. The cobalt dispersion and reducibility were improved as the Zr/(Zr + Al) atomic ratio increased to 50%. The performance of these catalysts for Fischer-Tropsch synthesis was evaluated using a fixed bed reactor at temperature and pressure of 493 K and 20 bar, respectively. The feed syngas had an H2/CO ratio of 2, diluted with 10% Ar. For isomorphically Zr-substituted Co/MA, the CO conversion and selectivity of diesel (C10 - C20) increased first and then decreased with increasing the Zr/(Zr + Al) atomic ratio. The maximum 38.9% CO conversion and 34.6% diesel (C10 - C20) selectivity were obtained at Zr/(Zr + Al) atomic ratio of 5%. The isomorphic substitution method was better than the wet impregnation method in CO conversion and diesel selectivity.