The synthesis of methacrylic acid from biomass-derived itaconic acid is a green route,for it can get rid of the dependence on fossil resource.In order to solve the problems on this route such as use of a preciousmetal...The synthesis of methacrylic acid from biomass-derived itaconic acid is a green route,for it can get rid of the dependence on fossil resource.In order to solve the problems on this route such as use of a preciousmetal catalyst and a corrosive homogeneous alkali,we prepared a series of hydroxyapatite catalysts by an ionic liquid-assisted hydrothermal method and evaluated their catalytic performance.The results showed that the ionic liquid[Bmim]BF_(4) can affect the crystal growth of hydroxyapatite,provide fluoride ion for fluorination of hydroxyapatite,and adjust the surface acidity and basicity,morphology,textural properties,crystallinity,and composition of hydroxyapatite.The[Bmim]BF4 dosage and hydrothermal temperature can affect the fluoride ion concentration in the hydrothermal system,thus changing the degree of fluoridation of hydroxyapatite.High fluoride-ion concentration can lead to the formation of CaF_(2) and thus significantly decrease the catalytic performance of hydroxyapatite.The hydrothermal time mainly affects the growth of hydroxyapatite crystals on the c axis,leading to different catalytic performance.The suitable conditions for the preparation of this fluoridized hydroxyapatite are as follows:a mass ratio of[Bmim]BF4 to calcium salt=0.2:1,a hydrothermal time of 12 h,and a hydrothermal temperature of 130℃.A maximal methacrylic acid yield of 54.7%was obtained using the fluoridized hydroxyapatite under relatively mild reaction conditions(250℃ and 2 MPa of N_(2))in the absence of a precious-metal catalyst and a corrosive homogeneous alkali.展开更多
Methacrylic acid,an important organic chemical,is commercially manufactured starting from fossil feedstock.The decarboxylation of itaconic acid derived for biomass is a green route to the synthesis of methacrylic acid...Methacrylic acid,an important organic chemical,is commercially manufactured starting from fossil feedstock.The decarboxylation of itaconic acid derived for biomass is a green route to the synthesis of methacrylic acid.In view of the problems existing in the researches on this route such as use of noble metal catalyst,harsh reaction conditions and low desired-product yield,we prepared a series of hydroxyapatite catalysts with different Ca/P molar ratios and evaluated their catalytic performance.The results showed that the hydroxyapatite catalyst with a Ca/P molar ratio of 1.58 had the best catalytic activity.The highest yield of MAA up to 61.2%was achieved with basically complete conversion of itaconic acid under the suitable reaction conditions of 1 equivalent of NaOH,2 MPa of N_(2),250℃,and 2 h.On this basis,a reaction network for the decarboxylation of itaconic acid to methacrylic acid catalyzed by hydroxyapatite was established.With the aid of catalyst characterization using X-ray powder diffraction,NH3/CO2 temperature-programmed desorption,N_(2)physisorption,inductively coupled plasma optical emission spectrometry,and scanning electron microscopy,we found that the distribution of surface acid sites and basic sites,crystal growth orientation,texture properties and morphology of hydroxyapatite varied with the Ca/P molar ratio.Furthermore,the change of the crystal growth orientation and its influence on the surface acidity and alkalinity were clarified.展开更多
Poly(aspartic acid-itaconic acid) copolymer was synthesized from aspartic acid(Asp) and itaconic acid(Ita) under microwave irradiation. The effects of microwave power, microwave irradiation time, molar ratio of itacon...Poly(aspartic acid-itaconic acid) copolymer was synthesized from aspartic acid(Asp) and itaconic acid(Ita) under microwave irradiation. The effects of microwave power, microwave irradiation time, molar ratio of itaconic acid and aspartic acid, catalyst type, catalyst and organic solvent content on copolymer yield, and the performance for inhibition of CaCO_3 fouling were investigated. It was found that the product yield achieved a highest record of 95% when the amount of catalyst Na H_2PO_4 was 0.012 mol, the amount of organic solvent propylene carbonate was 16 m L, the molar ratio of Asp/Ita was 3:1, the microwave output power was 1200 W and the irradiation time was 5.5 min. And the product performance for inhibition of calcium carbonate also reached a highest value of 94.38%. Structural characterization of the product showed that the product was the aspartic acid-itaconic acid copolymer.展开更多
Cotton fabric samples are padded with maleic acid (MA) and itaconic acid (IA) finishing bath in the presence of potassium persulfate (K 2S 2O 8), and then dried at different temperatures for different time intervals. ...Cotton fabric samples are padded with maleic acid (MA) and itaconic acid (IA) finishing bath in the presence of potassium persulfate (K 2S 2O 8), and then dried at different temperatures for different time intervals. The portion of unreacted monomers on cotton fabric samples is determined by means of measuring the double bond content. The kinetic data (rate constants, Arrhenius activation energy, frequency factor) of the in-situ polymerization have been calculated.展开更多
The terpolymer of itaconic acid, acrylamide and 2-acrylamido-2-methyl-1-propane sulfonic acid was synthesized through the free-radical polymerization. The IR spectra confirmed that there was no olefinic band, while th...The terpolymer of itaconic acid, acrylamide and 2-acrylamido-2-methyl-1-propane sulfonic acid was synthesized through the free-radical polymerization. The IR spectra confirmed that there was no olefinic band, while the TGA results revealed that the terpolymer was of high thermal stability.展开更多
The reaction mechanism of IA/MA copolymer system andcotton cellulose is conjectured and verified, the two keysteps, such as the formation of cyclic anhydride interme-diates and the building of ester crosslinklng, and ...The reaction mechanism of IA/MA copolymer system andcotton cellulose is conjectured and verified, the two keysteps, such as the formation of cyclic anhydride interme-diates and the building of ester crosslinklng, and the ef-fect of sodium hypophosphite are especially emphasized,by FT - IR spectroscopy and acid- base titration anal-yses. The experiments reveal that carboxylic acids main.ly change to cyclic anhydride in the pre - drying step andSodium Hypophosphite (SHP) has effect on it, but mostester - crosslinkages are built in the curing step and SHPhas effects on both anhydride formation and ester -crosslinking formation.展开更多
基金supported by National Natural Science Foundation of China(21978066)Basic Research Program of Hebei Province for Natural Science Foundation and Key Basic Research Project(18964308D)the Key Program of Natural Science Foundation of Hebei Province(B2020202048).
文摘The synthesis of methacrylic acid from biomass-derived itaconic acid is a green route,for it can get rid of the dependence on fossil resource.In order to solve the problems on this route such as use of a preciousmetal catalyst and a corrosive homogeneous alkali,we prepared a series of hydroxyapatite catalysts by an ionic liquid-assisted hydrothermal method and evaluated their catalytic performance.The results showed that the ionic liquid[Bmim]BF_(4) can affect the crystal growth of hydroxyapatite,provide fluoride ion for fluorination of hydroxyapatite,and adjust the surface acidity and basicity,morphology,textural properties,crystallinity,and composition of hydroxyapatite.The[Bmim]BF4 dosage and hydrothermal temperature can affect the fluoride ion concentration in the hydrothermal system,thus changing the degree of fluoridation of hydroxyapatite.High fluoride-ion concentration can lead to the formation of CaF_(2) and thus significantly decrease the catalytic performance of hydroxyapatite.The hydrothermal time mainly affects the growth of hydroxyapatite crystals on the c axis,leading to different catalytic performance.The suitable conditions for the preparation of this fluoridized hydroxyapatite are as follows:a mass ratio of[Bmim]BF4 to calcium salt=0.2:1,a hydrothermal time of 12 h,and a hydrothermal temperature of 130℃.A maximal methacrylic acid yield of 54.7%was obtained using the fluoridized hydroxyapatite under relatively mild reaction conditions(250℃ and 2 MPa of N_(2))in the absence of a precious-metal catalyst and a corrosive homogeneous alkali.
基金supported by the National Natural Science Foundation of China(Grant No.21978066)Basic Research Program of Hebei Province for Natural Science Foundation and Key Basic Research Project(Grant No.18964308D)the Key Program of Natural Science Foundation of Hebei Province(Grant No.B2020202048).
文摘Methacrylic acid,an important organic chemical,is commercially manufactured starting from fossil feedstock.The decarboxylation of itaconic acid derived for biomass is a green route to the synthesis of methacrylic acid.In view of the problems existing in the researches on this route such as use of noble metal catalyst,harsh reaction conditions and low desired-product yield,we prepared a series of hydroxyapatite catalysts with different Ca/P molar ratios and evaluated their catalytic performance.The results showed that the hydroxyapatite catalyst with a Ca/P molar ratio of 1.58 had the best catalytic activity.The highest yield of MAA up to 61.2%was achieved with basically complete conversion of itaconic acid under the suitable reaction conditions of 1 equivalent of NaOH,2 MPa of N_(2),250℃,and 2 h.On this basis,a reaction network for the decarboxylation of itaconic acid to methacrylic acid catalyzed by hydroxyapatite was established.With the aid of catalyst characterization using X-ray powder diffraction,NH3/CO2 temperature-programmed desorption,N_(2)physisorption,inductively coupled plasma optical emission spectrometry,and scanning electron microscopy,we found that the distribution of surface acid sites and basic sites,crystal growth orientation,texture properties and morphology of hydroxyapatite varied with the Ca/P molar ratio.Furthermore,the change of the crystal growth orientation and its influence on the surface acidity and alkalinity were clarified.
基金supported financially from the National Natural Science Foundation of China (Grant No. 51308211)the State Key Laboratory of Urban Water Resource and Environment (HIT) (Grant No. ES200903)the Fundamental Research Funds for the Central Universities (Grant No. 2015MS63)
文摘Poly(aspartic acid-itaconic acid) copolymer was synthesized from aspartic acid(Asp) and itaconic acid(Ita) under microwave irradiation. The effects of microwave power, microwave irradiation time, molar ratio of itaconic acid and aspartic acid, catalyst type, catalyst and organic solvent content on copolymer yield, and the performance for inhibition of CaCO_3 fouling were investigated. It was found that the product yield achieved a highest record of 95% when the amount of catalyst Na H_2PO_4 was 0.012 mol, the amount of organic solvent propylene carbonate was 16 m L, the molar ratio of Asp/Ita was 3:1, the microwave output power was 1200 W and the irradiation time was 5.5 min. And the product performance for inhibition of calcium carbonate also reached a highest value of 94.38%. Structural characterization of the product showed that the product was the aspartic acid-itaconic acid copolymer.
基金Shanghaimunicipalscienceandtechnologydevelopmentfund (No .0 113110 15 )andShanghaimunicipalkeydisciplineproject
文摘Cotton fabric samples are padded with maleic acid (MA) and itaconic acid (IA) finishing bath in the presence of potassium persulfate (K 2S 2O 8), and then dried at different temperatures for different time intervals. The portion of unreacted monomers on cotton fabric samples is determined by means of measuring the double bond content. The kinetic data (rate constants, Arrhenius activation energy, frequency factor) of the in-situ polymerization have been calculated.
文摘The terpolymer of itaconic acid, acrylamide and 2-acrylamido-2-methyl-1-propane sulfonic acid was synthesized through the free-radical polymerization. The IR spectra confirmed that there was no olefinic band, while the TGA results revealed that the terpolymer was of high thermal stability.
文摘The reaction mechanism of IA/MA copolymer system andcotton cellulose is conjectured and verified, the two keysteps, such as the formation of cyclic anhydride interme-diates and the building of ester crosslinklng, and the ef-fect of sodium hypophosphite are especially emphasized,by FT - IR spectroscopy and acid- base titration anal-yses. The experiments reveal that carboxylic acids main.ly change to cyclic anhydride in the pre - drying step andSodium Hypophosphite (SHP) has effect on it, but mostester - crosslinkages are built in the curing step and SHPhas effects on both anhydride formation and ester -crosslinking formation.
