This paper introduces a kind of photoelectric hybridization measuring process.Owing to the characteristics of the compact form of shearing equipment to be analyzed and the connecting rod existing in two directional st...This paper introduces a kind of photoelectric hybridization measuring process.Owing to the characteristics of the compact form of shearing equipment to be analyzed and the connecting rod existing in two directional stress state during operation etc.,it is hard to obtain results by means of single electrical testing process.For this reason,this paper derives a group of calculation formulas of hybridization measuring process through comprehensive discussion of photoelectric analysis and electrical testing theories,thus providing an analytical method for actual measurement of complex engineering problems.展开更多
A modeling method of the support vector machine combined with matrix optics is considered; a complete new measurement model for double-four quadrant photoelectric detector is built. According to the analysis of the re...A modeling method of the support vector machine combined with matrix optics is considered; a complete new measurement model for double-four quadrant photoelectric detector is built. According to the analysis of the received light spot size and its motion with the changes of the defocusing amount of detector photosensitive surface and the detector position attitude in the optical path, a mathematic expression of photoelectrical conversion is given, which can be applicable to random setting position of the detector at any time. Based on least square support vector machine (LS SVM), the mapping relationship among the output signal linear characteristic parameters (zero neighborhood gradient and intercept), the defocusing amount of the detector and the installation position attitude angle is established. Thus, the multiple dimensional high accuracy measuring and adjusting control system can be left out, and adaptive measurement of the detector parameters can be realized. Compared with existed measurement model and method, the presented model has the advantages of more clear physical meaning, closer to work mechanism of detector, acquiring more complete sample data and wiping out the dead spots or bad spots in measurement. And the accuracy of displacement measurement is increased to 3?μm. At the same time, this measurement mode provides a technical shortcut for three-dimensional small angle measurement.展开更多
In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket’s departure ...In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket’s departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.展开更多
Blood pressure is an important physiological parameter to reflect human vital signs.In order to achieve the non-contact dynamic blood pressure acquisition based on ordinary optical camera,a theoretical understanding o...Blood pressure is an important physiological parameter to reflect human vital signs.In order to achieve the non-contact dynamic blood pressure acquisition based on ordinary optical camera,a theoretical understanding of the functional relationship between blood pressure and pulse wave signal conduction time.And through imaging photoelectric plethysmography(IPPG),pulse wave signal conduction time of forehead and hand was obtained with ordinary optical camera.First,the pulse wave conduction time was obtained by recording the video with an ordinary optical camera.Second,real-time blood pressure values were collected.Finally,based on the relationship between blood pressure and pulse wave conduction time,a non-contact blood pressure measurement prediction model was obtained through neural network fitting.So that non-contact blood pressure measurement with optical camera could be completed.The method in this paper has several advantages,such as low requirements on measuring equipment,low cost,and simple operation.It can let people get rid of the discomfort caused by measuring equipment such as cuff and can measure blood pressure at any time.The predicted blood pressure results were compared with an Omron wrist electronic sphygmomanometer.The calculated error of systolic blood pressure is-9.28%~3.16%,and the error of diastolic blood pressure is-9.84~4.35%.展开更多
文摘This paper introduces a kind of photoelectric hybridization measuring process.Owing to the characteristics of the compact form of shearing equipment to be analyzed and the connecting rod existing in two directional stress state during operation etc.,it is hard to obtain results by means of single electrical testing process.For this reason,this paper derives a group of calculation formulas of hybridization measuring process through comprehensive discussion of photoelectric analysis and electrical testing theories,thus providing an analytical method for actual measurement of complex engineering problems.
文摘A modeling method of the support vector machine combined with matrix optics is considered; a complete new measurement model for double-four quadrant photoelectric detector is built. According to the analysis of the received light spot size and its motion with the changes of the defocusing amount of detector photosensitive surface and the detector position attitude in the optical path, a mathematic expression of photoelectrical conversion is given, which can be applicable to random setting position of the detector at any time. Based on least square support vector machine (LS SVM), the mapping relationship among the output signal linear characteristic parameters (zero neighborhood gradient and intercept), the defocusing amount of the detector and the installation position attitude angle is established. Thus, the multiple dimensional high accuracy measuring and adjusting control system can be left out, and adaptive measurement of the detector parameters can be realized. Compared with existed measurement model and method, the presented model has the advantages of more clear physical meaning, closer to work mechanism of detector, acquiring more complete sample data and wiping out the dead spots or bad spots in measurement. And the accuracy of displacement measurement is increased to 3?μm. At the same time, this measurement mode provides a technical shortcut for three-dimensional small angle measurement.
文摘In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket’s departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.
基金The work of this paper is supported by the National Natural Science Foundation of China under Grant No.61572038,the Innovation Project Foundation NCUT.
文摘Blood pressure is an important physiological parameter to reflect human vital signs.In order to achieve the non-contact dynamic blood pressure acquisition based on ordinary optical camera,a theoretical understanding of the functional relationship between blood pressure and pulse wave signal conduction time.And through imaging photoelectric plethysmography(IPPG),pulse wave signal conduction time of forehead and hand was obtained with ordinary optical camera.First,the pulse wave conduction time was obtained by recording the video with an ordinary optical camera.Second,real-time blood pressure values were collected.Finally,based on the relationship between blood pressure and pulse wave conduction time,a non-contact blood pressure measurement prediction model was obtained through neural network fitting.So that non-contact blood pressure measurement with optical camera could be completed.The method in this paper has several advantages,such as low requirements on measuring equipment,low cost,and simple operation.It can let people get rid of the discomfort caused by measuring equipment such as cuff and can measure blood pressure at any time.The predicted blood pressure results were compared with an Omron wrist electronic sphygmomanometer.The calculated error of systolic blood pressure is-9.28%~3.16%,and the error of diastolic blood pressure is-9.84~4.35%.
