Determination of geological strength index of jointed rock mass based on image processing

The geological strength index(GSI) system,widely used for the design and practice of mining process,is a unique rock mass classification system related to the rock mass strength and deformation parameters based on the generalized Hoek-Brown and Mohr-Coulomb failure criteria.The GSI can be estimated using standard chart and field observations of rock mass blockiness and discontinuity surface conditions.The GSI value gives a numerical representation of the overall geotechnical quality of the rock mass.In this study,we propose a method to determine the GSI quantitatively using photographic images of in situ jointed rock mass with image processing technology,fractal theory and artificial neural network(ANN).We employ the GSI system to characterize the jointed rock mass around the working in a coal mine.The relative error between the proposed value and the given value in the GSI chart is less than 3.6%.

CHANNEL ERROR CORRECTION FOR WIDEBAND SAR-A JOINT MULTIPLE SUBPULSES PROCESSING METHOD

A novel method,referred to as joint multiple subpulses processing,is developed to calibrate the nonideal transfer function of radio frequency front-end and I/Q imbalance in quadrature modulate/demodulate systems simultaneously,which frequently occur in wideband Synthetic Aperture Radar(SAR) systems.Based on the time-frequency relation of the chirp signal and the analyses of the channel errors in wideband SAR,joint multiple subpulses processing method is adopted to separate the image frequency component due to the I/Q channel error.Then,the complete description of the channel error is acquired for building the correction function,which is used to correct the radar raw echo in frequency domain.The validity and capability of this method are demonstrated by the experiments of the channel error correction on the high resolution SAR system with the effective bandwidth of 500 MHz.

Use of Image processing software in Hip Joint surgery

The scope of this project was to investigate the possibility of application of Image Processing Technique in the field of Shaft Alignment process. Misalignment of shaft using image processing software Visionbuilder was calculated. The further purpose of this project was to check whether the image processing technique can be used in bone transplant surgery. The model of the hip was used for the experimentation purpose. Image processing software Visionbuilder was used to match the profiles of the bone before implant and bone after implant.

Microstructures and microhardness for sheets and TIG welded joints of TA15 alloy using friction stir spot processing

Effects of friction stir spot processing(FSSP)on the microstructures and microhardness of tungsten inert gas(TIG)welded TA15titanium alloy joints were investigated.The macro/micro structural observation and microhardness evaluation of the TA15alloy sheets and TA15TIG welded joints were carried out using optical microscope and microhardness tests.The results show that FSSP effectively improves the microstructure and increases the microhardness of the TA15sheets.As for the TIG welded joints,FSSP also effectively improves the microstructure of joints.And the average microhardness value in weld nugget zone is improved significantly,while a small increase of this value in heat affected zone is observed.The hardness in stirring zone is significantly higher than that in the base metal.Two peak values of hardness appear along the width direction in stirring zone.After FSSP,the average hardness of the weld zone of TA15TIG welded joint is significantly higher than that before FSSP.Under the present process parameters,both the surface oxidation in TA15sheets and in TIG welded joints after FSSP are not evident,while the surface forms the bright white layer,which is composed of a great multitude of fine grains.

Laser Shock Processing of Metal Sheet and Welded Joints

In order to study the application of laser shock processing(LSP) as a post weld treatment technology and a strengthening technology, a series experiments and analysis were taken in this paper. The hardness of the laser shock processed zone of Al-Li alloy was measured, and the microstructure and mechanical properties of the welded joints of the Ni-based superalloy GH30 and the Austenitic stainless steel !Crl8Ni9Ti were compared with those without LSP in this paper. The results showed that the size of strengthened zone was similar to that of laser spot and strengthened layer was about 1mm deep, and the high intense dislocations and twins produced in the shocked zone. Plastic strain also gained surface residual compress stress, which is benefit for the fatigue properties of welded zones. In this test , the surface hardness of welding zone of the superalloy GH30 improved obviously and tensile strength increased by 12%, but the improvement of fatigue life was not obvious; Martensite phase is formed in plasma welding !Crl8Ni9Ti, which reduced the effect of strain deformation martensite induced by laser shock processing, but the surface residual compress stress gained by laser shock processing can obviously improve the fatigue life of !Crl8Ni9Ti welded joints.

Rupture process of the 2011 Tohoku earthquake from the joint inversion of teleseismic and GPS data

Teleseismic and GPS data were jointly inverted for the rupture process of the 2011 Tohoku earthquake. The inversion results show that it is a bilateral rupture event with an average rupture velocity less than 2.0 km/s along the fault strike direction. The source rupture process consists of three sub-events, the first oc- curred near the hypocenter and the rest two ruptured along the up-dip direction and broke the sea bed, causing a maximum slip of about 30 m. The large-scale sea bed breakage may account for the tremendous tsunami disaster which resulted in most of the death and missing in this mega earthquake.

Endoscopic joint capsule and articular process excision to treat lumbar facet joint syndrome:A case report

BACKGROUND Lumbar facet joint syndrome(LFJS)is a pain condition arising from lumbar facet joint diseases.Treatments of LFJS includes patient education,oral medication,bed rest,physical therapy,and procedural interventions.For some refractory cases that fail conservative therapies,dorsal ramus medial brunch radiofrequency ablation is warranted.However,as nerve fibers can regenerate,their efficacy is impermanent,and the recurrence rate is relatively high.Considering synovial impingement is a paramount pathogenesis of LFJS,in this case,we removed the culprit hyperplastic articular capsule and the articular process partially through a spinal endoscope.As the culprit hyperplastic joint capsule was excised,it is supposed to generate more prolonged efficacy and a lower recurrence rate than radiofrequency treatment.CASE SUMMARY A 40-year-old female patient was diagnosed with LFJS.She complained of low back pain and right buttock pain for half a year.The patient was placed in the prone position.After disinfection and draping,a 25-cm 18-gauge needle was inserted into the dorsal surface of the right L5 articular process.Subsequently,a guidewire,dilating tubes,and a working cannula was inserted successively.The spinal endoscope was positioned in the working cannula.Under the endoscope,the microvascular tissue,muscle tissue attached on the L5 inferior articular process and S1 superior articular process,as well as the capsule and minor portion of the inferior articular process were removed.After the joint space was clear and no bleeding points existed,the endoscope and working cannula were shifted,and the incision was sutured.After treatment,the symptoms were completely relieved.The patient was pain-free during the follow-up period of 6 mo.CONCLUSION The endoscopic partial joint capsule and articular process excision is an effective procedure for LFJS,especially for cases caused by synovial impingement.

Equivalence of Uniqueness in Law and Joint Uniqueness in Law for SDEs Driven by Poisson Processes

We give an extension result of Watanabe’s characterization for 2-dimensional Poisson processes. By using this result, the equivalence of uniqueness in law and joint uniqueness in law is proved for one-dimensional stochastic differential equations driven by Poisson processes. After that, we give a simplified Engelbert theorem for the stochastic differential equations of this type.

Management and classification of the fracture of lateral process of talus:An overview and literature update

Fracture of the lateral process of the talus(FLPT)is uncommon in clinical practice and can be easily missed or misdiagnosed.In recent years,as researchers from all over the world have further deepened their research on FLPT,there has been a breakthrough in the classification,and the methods and principles of clinical management have changed accordingly;however,there is still no standardized guideline for the diagnosis and management of FLPT,and there have been few relevant literature review articles related to this kind of fracture in the past at least 5 years.In this article,we review the clinical classification,classification-based therapeutic recommendations,and prognosis of FLPT,with the aim of providing a reference for the clinical diagnosis and management of this infrequent fracture.

Estimation of the 2010 Mentawai tsunami earthquake rupture process from joint inversion of teleseismic and strong ground motion data

Joint inversion of teleseismic body-wave data and strong ground motion waveforms was applied to determine the rupture process of the 2010 Mentawai earthquake. To obtain stable solutions, smoothing and non-negative constraints were introduced. A total of 33 teleseismic stations and 5 strong ground motion stations supplied data. The teleseismic and strong ground motion data were separately windowed for 150 s and 250 s and bandpass filtered with frequencies of 0.001e1.0 Hz and 0.005e0.5 Hz, respectively. The finitefault model was established with length and width of 190 km and 70 km, and the initial seismic source parameters were set by referring to centroid moment tensor(CMT) solutions. Joint inversion results indicate that the focal mechanism of this earthquake is thrust fault type, and the strike, dip, and rake angles are generally in accordance with CMT results. The seismic moment was determined as 5.814 1020Nm(Mw7.8) and source duration was about 102 s, which is greater than those of other earthquakes of similar magnitude. The rupture nucleated near the hypocenter and then propagated along the strike direction to the northwest, with a maximum slip of 3.9 m. Large uncertainties regarding the amount of slip retrieved using different inversion methods still exist; however, the conclusion that the majority of slip occurred far from the islands at very shallow depths was found to be robust. The 2010 Mentawai earthquake was categorized as a tsunami earthquake because of the long rupture duration and the generation of a tsunami much larger than was expected for an earthquake of its magnitude.

The joint Laplace transforms for killed diffusion occupation times

The approach of Li and Zhou(2014)is adopted to find the Laplace transform of occupation time over interval(0,a)and joint occupation times over semi-infinite intervals(-∞,a)and(b,∞)for a time-homogeneous diffusion process up to an independent exponential time e_(q)for 0<a<b.The results are expressed in terms of solutions to the differential equations associated with the diffusion generator.Applying these results,we obtain explicit expressions on the Laplace transform of occupation time and joint occupation time for Brownian motion with drift.

Unstable evolution of railway slope under the rainfall-vibration joint action

Understanding the unstable evolution of railway slopes is the premise for preventing slope failure and ensuring the safe operation of trains.However,as two major factors affecting the stability of railway slopes,few scholars have explored the unstable evolution of railway slopes under the joint action of rainfall-vibration.Based on the model test of sandy soil slope,the unstable evolution process of slope under locomotive vibration,rainfall,and rainfall-vibration joint action conditions was simulated in this paper.By comparing and analyzing the variation trends of soil pressure and water content of slope under these conditions,the change laws of pore pressure under the influence of vibration and rainfall were explored.The main control factors affecting the stability of slope structure under the joint action conditions were further defined.Combined with the slope failure phenomena under these three conditions,the causes of slope instability resulting from each leading factor were clarified.Finally,according to the above conclusions,the unstable evolution of the slope under the rainfall-vibration joint action was determined.The test results show that the unstable evolution process of sandy soil slope,under the rainfall-vibration joint action,can be divided into:rainfall erosion cracking,vibration promotion penetrating,and slope instability sliding three stages.In the process of slope unstable evolution,rainfall and vibration play the roles of inducing and promoting slide respectively.In addition,the deep cracks,which are the premise for the formation of the sliding surface,and the violent irregular fluctuation of soil pressure,which reflects the near penetration of the sliding surface,constitute the instability characteristics of the railway slope together.This paper reveals the unstable evolution of sandy soil slopes under the joint action of rainfall-vibration,hoping to provide the theoretical basis for the early warning and prevention technology of railway slopes.

考虑配电网全过程韧性提升的多类型韧性资源分布鲁棒机会约束规划

针对现有配电网韧性提升策略研究侧重于某一阶段、考虑韧性资源单一、刻画线路故障不确定性不全面等问题,提出了考虑配电网全过程韧性提升的多类型韧性资源分布鲁棒机会约束规划方法。首先,构建了基于Wasserstein距离的风场强度与线路故障概率、风机出力阈值之间强耦合下的不确定性模糊集。其次,建立了基于极端灾害时序特性的“预防-应急-抢修”双层三阶段配电网分布鲁棒机会约束规划模型对多类型韧性资源进行联合部署、调度。然后,进一步对模型进行线性化处理,并基于条件风险价值理论(conditional value-at-risk,CVaR)和强对偶理论将所提分布鲁棒模型转化为混合整数二阶锥规划问题。最后,基于算例数字仿真验证了所提方法能够保障强不确定环境下配电网的韧性和供电可靠性。

谱负Lévy过程末离时和占位时的分布研究

利用扰动方法和泊松方法研究谱负Lévy过程末离时T_(0)^(+)与首达时τ_(a)^(+)和过程在[0,τ_(a)^(+))上的占位时的联合分布,以及末离时T_(0)^(-)与首达时τ_(a)^(+)和过程在[0,τ_(a)^(+))上的占位时的联合分布。通过对这些分布的深入理解,可以更好地把握谱负Lévy过程的特性,所获得的结果以尺度函数的形式呈现。

磁法勘探技术在复杂地质构造区矿产资源调查中的应用研究

复杂地质构造区的矿产资源调查中磁异常的形成受多种地质因素影响,磁法勘探的应用面临着高精度测量、数据处理与解译等技术挑战。本文讨论了磁法勘探的基本原理、测量方法和数据处理技术并分析复杂地质构造区的磁异常特征与干扰因素。研究中提出磁法与重力法的联合勘探能提升勘探精度,磁法勘探在定位矿体、估算储量以及揭示地质构造方面具有较高的实际效果。复杂地质条件下磁法勘探仍面临误差来源、磁异常解译难度及数据优化等问题。基于地质背景的反演解译优化方法以及多物理场联合反演技术的创新应用,成为提升磁法勘探精度的有效途径。

深化中英教育合作:人才培养——探索中英合作办学之路(二)

中英合作办学作为高校深度探索和实践“在地国际化”培养模式的主要形式,已成为培养国际化人才的重要途径。从生源情况、培养过程、毕业生质量、学生评价四个层面,即“入口—过程—出口—反馈”,系统分析中英合作办学的人才培养特点与成效具有重要意义。研究发现,中英合作办学在优质教育资源融合、国际化视野拓展、实践能力培养及高水平人才供给等方面具有显著优势。新时期,中英合作办学应继续加强师资队伍建设、优化课程设置、建立现代大学治理体系,以全面实现更高质量的发展。

Cracking process of rock mass models under uniaxial compression

Anisotropic strength and deformability of the rock mass with non-persistent joints are governed by cracking process of the rock bridges. The dependence of cracking process of jointed rock masses on the two important geometrical parameters, joint orientation and joint persistence, was studied systematically by carrying out a series of uniaxial compression tests on gypsum specimens with regularly arranged multiple parallel pre-existing joints. According to crack position, mechanism and temporal sequence, seven types of crack initiations and sixteen types of crack coalescences, were identified. It was observed that both tensile cracks and shear cracks can emanate from the pre-existing joints as well as the matrix. Vertical joints were included and coplanar tensile cracks initiation and coalescence were observed accordingly. For specimen with joint inclination angle ,8=75~, it was found that collinear joints can be linked not only by coplanar shear cracks but also by mixed tensile-shear cracks, and that a pair of them can form a small rotation block. Seven failure modes, including axial cleavage, crushing, crushing and rotation of new blocks, stepped failure, stepped failure and rotation of new blocks, shear failure along a single plane and shear failure along multiple planes, were observed. These modes shift gradually in accordance with the combined variation of joint orientation and joint persistence. It is concluded that cracking process and failure modes are more strongly affected by joint orientation than by joint persistence, especially when joint inclination angle is larger than 45~. Finally, variations of macroscopic mechanical behaviors with the two geometrical parameters, such as patterns of the complete axial stress-axial strain curves, peak strength and elastic modulus, are summarized and their mechanisms are successfully explained according to their different cracking process.

Joint optimization of maintenance inspection and spare provisioning for aircraft deteriorating parts

With the wide application of condition based maintenance(CBM) in aircraft maintenance practice, the joint optimization of maintenance and inventory management, which can take full advantage of CBM and reduce the aircraft operational cost, is receiving increasing attention. In order to optimize the inspection interval, maintenance decision and spare provisioning together for aircraft deteriorating parts, firstly, a joint inventory management strategy is presented, then, a joint optimization of maintenance inspection and spare provisioning for aircraft parts subject to the Wiener degradation process is proposed based on the strategy.Secondly, a combination of the genetic algorithm(GA) and the Monte Carol method is developed to minimize the total cost rate.Finally, a case study is conducted and the proposed joint optimization model is compared with the existing optimization model and the airline real case. The results demonstrate that the proposed model is more beneficial and effective. In addition, the sensitivity analysis of the proposed model shows that the lead time has higher influence on the optimal results than the urgent order cost and the corrective maintenance cost, which is consistent with the actual situation of aircraft maintenance practices and inventory management.

Autonomous process collaboration framework for C4ISR system interoperation

Interoperability plays an important role in the joint command, control, communication, computer, intelligence, surveillance, reconnaissance(C4 ISR) operations. Coordinating and integrating operational processes to fulfill a common mission are challenged by the ever-changing battlefield and hence requires a cross-organizational process management that produces an autonomous, flexible and adaptable architecture for collaborative process evolution. The traditional business process collaboration pattern is based on the predefined "public-view" perspective and cannot meet the requirement of the joint task operations. This paper proposes a flexible visibility control mechanism and a dynamic collaboration framework for modeling and generating collaborative processes. The mechanism allows collaborators to define a set of visibility rules to generate different views of the private processes for different collaborations, which gives a great flexibility for the collaboration initiator to decide on an appropriate collaboration pattern. The framework supports collaborators to dynamically and recursively add a new process or even a new organization to an existing collaboration. Moreover, a formal representation of the processes and a set of generation algorithms are provided to consolidate the proposed theory.

Study on solder joint reliability of ceramic ball grid array component based on design of experiment method

Four process parameters, pad diameter, stencil thickness, ball diameter and stand-off were chosen as four control factors. By using an L25 （5^6 ） orthogonal array the ceramic ball grid array （ CBGA ） solder joints which have 25 different combinations of process parameters were designed. The numerical models of all the 25 CBGA solder joints were developed using the Sugrace Evolver. Utilizing the sugrace coordinate exported from the 25 CBGA solder joints numerical models, the finite element analysis models were set up and the nonlinear finite element analysis of the CBGA solder joints under thermal cycles were pegrormed by ANSYS. The thermal fatigue life of CBGA solder joint was calculated using Coffin-Manson equation. Based on the calculated thermal fatigue life results, the range analysis and the variance analysis were pegrormed. The results show that the fatigue life of CBGA solder joint is affected by the pad diameter, the stencil thickness, the ball diameter and the stand-off in a descending order, the best combination of process parameters results in the longest fatigue life is 0.07 mm stand-off, 0.125 mm stencil thickness of, 0.85 mm ball diameter and 0. 89 mm pad diameter. With 95% confidence the pad diameter has a significant effect on the reliability of CBGA solder joints whereas the stand-off, the stencil thickness and the ball diameter have little effect on the reliability of CBGA solder joints.