The performance of data-driven models relies heavily on the amount and quality of training samples, so it might deteriorate significantly in the regions where samples are scarce. The objective of this paper is to deve...The performance of data-driven models relies heavily on the amount and quality of training samples, so it might deteriorate significantly in the regions where samples are scarce. The objective of this paper is to develop an online SVR model updating strategy to track the change in the process characteristics efficiently with affordable computational burden. This is achieved by adding a new sample that violates the Karush–Kuhn–Tucker conditions of the existing SVR model and by deleting the old sample that has the maximum distance with respect to the newly added sample in feature space. The benefits offered by such an updating strategy are exploited to develop an adaptive model-based control scheme, where model updating and control task perform alternately.The effectiveness of the adaptive controller is demonstrated by simulation study on a continuous stirred tank reactor. The results reveal that the adaptive MPC scheme outperforms its non-adaptive counterpart for largemagnitude set point changes and variations in process parameters.展开更多
Extending the lead time of precipitation nowcasts is vital to improvements in heavy rainfall warning, flood mitigation, and water resource management. Because the TREC vector （tracking radar echo by correlation） rep...Extending the lead time of precipitation nowcasts is vital to improvements in heavy rainfall warning, flood mitigation, and water resource management. Because the TREC vector （tracking radar echo by correlation） represents only the instantaneous trend of precipitation echo motion, the approach using derived echo motion vectors to extrapolate radar reflectivity as a rainfall forecast is not satisfactory if the lead time is beyond 30 minutes. For longer lead times, the effect of ambient winds on echo movement should be considered. In this paper, an extrapolation algorithm that extends forecast lead times up to 3 hours was developed to blend TREC vectors with model-predicted winds. The TREC vectors were derived from radar reflectivity patterns in 3 km height CAPPI （constant altitude plan position indicator） mosaics through a cross-correlation technique. The background steering winds were provided by predictions of the rapid update assimilation model CHAF （cycle of hourly assimilation and forecast）. A similarity index was designed to determine the vertical level at which model winds were applied in the extrapolation process, which occurs via a comparison between model winds and radar vectors. Based on a summer rainfall case study, it is found that the new algorithm provides a better forecast.展开更多
In order to establish the baseline finite element model for structural health monitoring,a new method of model updating was proposed after analyzing the uncertainties of measured data and the error of finite element m...In order to establish the baseline finite element model for structural health monitoring,a new method of model updating was proposed after analyzing the uncertainties of measured data and the error of finite element model.In the new method,the finite element model was replaced by the multi-output support vector regression machine(MSVR).The interval variables of the measured frequency were sampled by Latin hypercube sampling method.The samples of frequency were regarded as the inputs of the trained MSVR.The outputs of MSVR were the target values of design parameters.The steel structure of National Aquatic Center for Beijing Olympic Games was introduced as a case for finite element model updating.The results show that the proposed method can avoid solving the problem of complicated calculation.Both the estimated values and associated uncertainties of the structure parameters can be obtained by the method.The static and dynamic characteristics of the updated finite element model are in good agreement with the measured data.展开更多
Model updating for aircraft in a high temperature environment(HTE)is proposed based on the hierarchical method.With this method,the problem can be decomposed into temperature field updating and dynamic structural upda...Model updating for aircraft in a high temperature environment(HTE)is proposed based on the hierarchical method.With this method,the problem can be decomposed into temperature field updating and dynamic structural updating.In order to improve the estimation accuracy,the model updating problem is turned into a multi-objective optimization problem by constructing the objective function which combined with residues of modal frequency and effective modal mass.Then the metamodeling,support vector regression(SVR)is introduced to improve the optimization efficiency,and the solution can be determined by adaptive weighted-sum method(AWS).Finally,the proposed method is tested on a finite element(FE)model of a reentry vehicle model.The results show that the multi-objective model updating method in HTE can identify the input parameters of the temperature field and structure with good accuracy.展开更多
This paper proposes a novel hypersphere support vector machines （HSVMs） based on generalized multiplicative updates. This algorithm can obtain the boundary of hypersphere containing one class of samples by the descr...This paper proposes a novel hypersphere support vector machines （HSVMs） based on generalized multiplicative updates. This algorithm can obtain the boundary of hypersphere containing one class of samples by the description of the training samples from one class and use this boundary to classify the test samples. The generalized multiplicative updates are applied to solving boundary optimization progranmning. Multiplicative updates available are suited for nonnegative quadratic convex programming. The generalized multiplicative updates are derived to box and sum constrained quadratic programming in this paper. They provide an extremely straightforward way to implement support vector machines （SVMs） where all variables are updated in parallel. The generalized multiplicative updates converge monotonically to the solution of the maximum margin hyperplane. The experiments show the superiority of our new algorithm.展开更多
针对传统电压源逆变器无模型预测电流控制(model-free predictive current control,MFPCC)方法存在电流纹波大、电流梯度更新停滞以及预测性能易受采样扰动影响的问题。该文提出一种计及采样扰动的三矢量MFPCC方法。在一个控制周期应用...针对传统电压源逆变器无模型预测电流控制(model-free predictive current control,MFPCC)方法存在电流纹波大、电流梯度更新停滞以及预测性能易受采样扰动影响的问题。该文提出一种计及采样扰动的三矢量MFPCC方法。在一个控制周期应用3个基本矢量,并根据价值函数计算矢量作用时间,降低了输出电流纹波;其次,通过建立不同矢量作用下的电流梯度方程组,实现电流梯度数据的实时更新,消除了停滞现象;再次,分析采样扰动对MFPCC的影响,采用扩张状态观测器估计采样扰动以补偿预测电流控制,抑制其对输出电流的影响。最后,通过仿真和实验,对所提方法的有效性进行了验证。展开更多
基金Supported by the National Basic Research Program of China(2012CB720500)Postdoctoral Science Foundation of China(2013M541964)Fundamental Research Funds for the Central Universities(13CX05021A)
文摘The performance of data-driven models relies heavily on the amount and quality of training samples, so it might deteriorate significantly in the regions where samples are scarce. The objective of this paper is to develop an online SVR model updating strategy to track the change in the process characteristics efficiently with affordable computational burden. This is achieved by adding a new sample that violates the Karush–Kuhn–Tucker conditions of the existing SVR model and by deleting the old sample that has the maximum distance with respect to the newly added sample in feature space. The benefits offered by such an updating strategy are exploited to develop an adaptive model-based control scheme, where model updating and control task perform alternately.The effectiveness of the adaptive controller is demonstrated by simulation study on a continuous stirred tank reactor. The results reveal that the adaptive MPC scheme outperforms its non-adaptive counterpart for largemagnitude set point changes and variations in process parameters.
基金This study was provided by Natural Science Foundation of Guangdong Province under Grant No. 5001121the China Meteorological Administration under Grant Nos. CMATG2005Y05 and CMATG2008Z10the Guangdong Meteorological Bureau under Grant Nos. 2007A2 and GRMC2007Z03
文摘Extending the lead time of precipitation nowcasts is vital to improvements in heavy rainfall warning, flood mitigation, and water resource management. Because the TREC vector （tracking radar echo by correlation） represents only the instantaneous trend of precipitation echo motion, the approach using derived echo motion vectors to extrapolate radar reflectivity as a rainfall forecast is not satisfactory if the lead time is beyond 30 minutes. For longer lead times, the effect of ambient winds on echo movement should be considered. In this paper, an extrapolation algorithm that extends forecast lead times up to 3 hours was developed to blend TREC vectors with model-predicted winds. The TREC vectors were derived from radar reflectivity patterns in 3 km height CAPPI （constant altitude plan position indicator） mosaics through a cross-correlation technique. The background steering winds were provided by predictions of the rapid update assimilation model CHAF （cycle of hourly assimilation and forecast）. A similarity index was designed to determine the vertical level at which model winds were applied in the extrapolation process, which occurs via a comparison between model winds and radar vectors. Based on a summer rainfall case study, it is found that the new algorithm provides a better forecast.
基金Project(50678052) supported by the National Natural Science Foundation of China
文摘In order to establish the baseline finite element model for structural health monitoring,a new method of model updating was proposed after analyzing the uncertainties of measured data and the error of finite element model.In the new method,the finite element model was replaced by the multi-output support vector regression machine(MSVR).The interval variables of the measured frequency were sampled by Latin hypercube sampling method.The samples of frequency were regarded as the inputs of the trained MSVR.The outputs of MSVR were the target values of design parameters.The steel structure of National Aquatic Center for Beijing Olympic Games was introduced as a case for finite element model updating.The results show that the proposed method can avoid solving the problem of complicated calculation.Both the estimated values and associated uncertainties of the structure parameters can be obtained by the method.The static and dynamic characteristics of the updated finite element model are in good agreement with the measured data.
基金supported by the National Natural Science Foundation of China(No.11472132)the Fundamental Research Funds for Central University (No. NJ20160050)the Fundamental Research Funds for Central University(No.NJ2016098)
文摘Model updating for aircraft in a high temperature environment(HTE)is proposed based on the hierarchical method.With this method,the problem can be decomposed into temperature field updating and dynamic structural updating.In order to improve the estimation accuracy,the model updating problem is turned into a multi-objective optimization problem by constructing the objective function which combined with residues of modal frequency and effective modal mass.Then the metamodeling,support vector regression(SVR)is introduced to improve the optimization efficiency,and the solution can be determined by adaptive weighted-sum method(AWS).Finally,the proposed method is tested on a finite element(FE)model of a reentry vehicle model.The results show that the multi-objective model updating method in HTE can identify the input parameters of the temperature field and structure with good accuracy.
基金Project supported by the National Natural Science Foundation of China (Grant No.60574075)
文摘This paper proposes a novel hypersphere support vector machines （HSVMs） based on generalized multiplicative updates. This algorithm can obtain the boundary of hypersphere containing one class of samples by the description of the training samples from one class and use this boundary to classify the test samples. The generalized multiplicative updates are applied to solving boundary optimization progranmning. Multiplicative updates available are suited for nonnegative quadratic convex programming. The generalized multiplicative updates are derived to box and sum constrained quadratic programming in this paper. They provide an extremely straightforward way to implement support vector machines （SVMs） where all variables are updated in parallel. The generalized multiplicative updates converge monotonically to the solution of the maximum margin hyperplane. The experiments show the superiority of our new algorithm.
文摘针对传统电压源逆变器无模型预测电流控制(model-free predictive current control,MFPCC)方法存在电流纹波大、电流梯度更新停滞以及预测性能易受采样扰动影响的问题。该文提出一种计及采样扰动的三矢量MFPCC方法。在一个控制周期应用3个基本矢量,并根据价值函数计算矢量作用时间,降低了输出电流纹波;其次,通过建立不同矢量作用下的电流梯度方程组,实现电流梯度数据的实时更新,消除了停滞现象;再次,分析采样扰动对MFPCC的影响,采用扩张状态观测器估计采样扰动以补偿预测电流控制,抑制其对输出电流的影响。最后,通过仿真和实验,对所提方法的有效性进行了验证。
