In this paper a Verigin problem with kinetic condition is considered. The existence and uniqueness of a classical solution locally in time of this problem are obtained.
In this paper, we prove the existence theorems of locbal or global classical solutions to Stefan problems with various kinetic conditions at the free boundary.
An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting ...An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of（NH_4）_2SO_4/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric-differential thermal analysis was used for（NH_4）_2SO_4 and zinc mixed in a molar ratio of 1.4：1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle-Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained.展开更多
The effects of the reaction temperature, the crosslinking degree of the matrix, the pore-forming agent and the initial concentration of PVA on the kinetic properties of the complex-resins were investigated. The ion-ex...The effects of the reaction temperature, the crosslinking degree of the matrix, the pore-forming agent and the initial concentration of PVA on the kinetic properties of the complex-resins were investigated. The ion-exchange rate of the complex-resin for L-lysine chlorate was three-fold that of 001×8 resin and two-fold that of D61 resin.展开更多
The gas-kinetic theory based flux splitting method has been successfully proposed for solving one-and two-dimensional ideal magnetohydrodynamics by Xu et al. [J.Comput.Phys.,1999;2000],respectively.This paper extends ...The gas-kinetic theory based flux splitting method has been successfully proposed for solving one-and two-dimensional ideal magnetohydrodynamics by Xu et al. [J.Comput.Phys.,1999;2000],respectively.This paper extends the kinetic method to solve three-dimensional ideal magnetohydrodynamics equations,where an adaptive parameter 17 is used to control the numerical dissipation in the flux splitting method. Several numerical examples are given to demonstrate that the proposed method can achieve high numerical accuracy and resolve strong discontinuous waves in three dimensional ideal MHD problems.展开更多
Geomaterials are known to be non-associated materials. Granular soils therefore exhibit a variety of failure modes, with diffuse or localized kinematical patterns. In fact, the notion of failure itself can be confusin...Geomaterials are known to be non-associated materials. Granular soils therefore exhibit a variety of failure modes, with diffuse or localized kinematical patterns. In fact, the notion of failure itself can be confusing with regard to granular soils, because it is not associated with an obvious phenomenology. In this study, we built a proper framework, using the second-order work theory, to describe some failure modes in geomaterials based on energy conservation. The occurrence of failure is defined by an abrupt increase in kinetic energy. The increase in kinetic energy from an equilibrium state, under incremental loading, is shown to be equal to the difference between the external second-order work,involving the external loading parameters, and the internal second-order work, involving the constitutive properties of the material. When a stress limit state is reached, a certain stress component passes through a maximum value and then may decrease. Under such a condition, if a certain additional external loading is applied, the system fails, sharply increasing the strain rate. The internal stress is no longer able to balance the external stress, leading to a dynamic response of the specimen. As an illustration, the theoretical framework was applied to the well-known undrained triaxial test for loose soils. The influence of the loading control mode was clearly highlighted. It is shown that the plastic limit theory appears to be a particular case of this more general second-order work theory. When the plastic limit condition is met, the internal second-order work is nil. A class of incremental external loadings causes the kinetic energy to increase dramatically, leading to the sudden collapse of the specimen, as observed in laboratory.展开更多
文摘In this paper a Verigin problem with kinetic condition is considered. The existence and uniqueness of a classical solution locally in time of this problem are obtained.
文摘In this paper, we prove the existence theorems of locbal or global classical solutions to Stefan problems with various kinetic conditions at the free boundary.
基金financially supported by the National Natural Science Foundation of China(Nos.51204054 and 51574084)the Fundamental Research Funds for the Central Universities of China(No.N150204009)the National Basic Research Priorities Program of China(No.2014CB643405)
文摘An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of（NH_4）_2SO_4/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric-differential thermal analysis was used for（NH_4）_2SO_4 and zinc mixed in a molar ratio of 1.4：1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle-Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained.
基金Supported by the Tianjin scientific youth fund for 21th centrury
文摘The effects of the reaction temperature, the crosslinking degree of the matrix, the pore-forming agent and the initial concentration of PVA on the kinetic properties of the complex-resins were investigated. The ion-exchange rate of the complex-resin for L-lysine chlorate was three-fold that of 001×8 resin and two-fold that of D61 resin.
基金supported by the National Basic Research Program under the Grant 2005CB321703the National Natural Science Foundation of China(No.10925101 and No.10828101)+4 种基金the Doctoral Program of the Education Ministry of China(No.20070001036)the Program for New Century Excellent Talents in University(No.NCET-07-0022)supported by Hong Kong Research Grant Council 621709National Natural Science Foundation of China(Project No.10928205)National Key Basic Research Program(2009CB724101)
文摘The gas-kinetic theory based flux splitting method has been successfully proposed for solving one-and two-dimensional ideal magnetohydrodynamics by Xu et al. [J.Comput.Phys.,1999;2000],respectively.This paper extends the kinetic method to solve three-dimensional ideal magnetohydrodynamics equations,where an adaptive parameter 17 is used to control the numerical dissipation in the flux splitting method. Several numerical examples are given to demonstrate that the proposed method can achieve high numerical accuracy and resolve strong discontinuous waves in three dimensional ideal MHD problems.
基金the French Research Network Me Ge (Multiscale and Multiphysics Couplings in Geo-environmental Mechanics GDR CNRS 3176/2340, 2008e2015) for having supported this work
文摘Geomaterials are known to be non-associated materials. Granular soils therefore exhibit a variety of failure modes, with diffuse or localized kinematical patterns. In fact, the notion of failure itself can be confusing with regard to granular soils, because it is not associated with an obvious phenomenology. In this study, we built a proper framework, using the second-order work theory, to describe some failure modes in geomaterials based on energy conservation. The occurrence of failure is defined by an abrupt increase in kinetic energy. The increase in kinetic energy from an equilibrium state, under incremental loading, is shown to be equal to the difference between the external second-order work,involving the external loading parameters, and the internal second-order work, involving the constitutive properties of the material. When a stress limit state is reached, a certain stress component passes through a maximum value and then may decrease. Under such a condition, if a certain additional external loading is applied, the system fails, sharply increasing the strain rate. The internal stress is no longer able to balance the external stress, leading to a dynamic response of the specimen. As an illustration, the theoretical framework was applied to the well-known undrained triaxial test for loose soils. The influence of the loading control mode was clearly highlighted. It is shown that the plastic limit theory appears to be a particular case of this more general second-order work theory. When the plastic limit condition is met, the internal second-order work is nil. A class of incremental external loadings causes the kinetic energy to increase dramatically, leading to the sudden collapse of the specimen, as observed in laboratory.
