Mitigated reaction kinetics between lithium metal anodes and electrolytes by alloying lithium metal with low-content magnesium

Lithium(Li)metal is regarded as a promising anode candidate for high-energy-density rechargeable batteries.Nevertheless,Li metal is highly reactive against electrolytes,leading to rapid decay of active Li metal reservoir.Here,alloying Li metal with low-content magnesium(Mg)is proposed to mitigate the reaction kinetics between Li metal anodes and electrolytes.Mg atoms enter the lattice of Li atoms,forming solid solution due to the low amount(5 wt%)of Mg.Mg atoms mainly concentrate near the surface of Mg-alloyed Li metal anodes.The reactivity of Mg-alloyed Li metal is mitigated kinetically,which results from the electron transfer from Li to Mg atoms due to the electronegativity difference.Based on quantitative experimental analysis,the consumption rate of active Li and electrolytes is decreased by using Mgalloyed Li metal anodes,which increases the cycle life of Li metal batteries under demanding conditions.Further,a pouch cell(1.25 Ah)with Mg-alloyed Li metal anodes delivers an energy density of 340 Wh kg^(-1)and a cycle life of 100 cycles.This work inspires the strategy of modifying Li metal anodes to kinetically mitigate the side reactions with electrolytes.

Copper Indium Sulfide Enables Li-CO_(2)Batteries with Boosted Reaction Kinetics and Cycling Stability

High energy density Li-CO_(2)batteries have attracted much attention owing to the"two birds with one stone"feature in fixing greenhouse gas CO_(2)and providing renewable energy.However,poor reversibility of the discharge product Li_(2)CO_(3)is one of the main problems that limit its application,resulting in poor cycling stability and severe polarization.Herein,copper indium sulfide(CIS),a semiconducting non-precious metal sulfide,is fabricated as cathode catalysts for high-performance Li-CO_(2)batteries.Combined with the synergistic effect of bimetallic valence bonding and coordinated electron transfer,Li-CO_(2)batteries using CIS cathodes exhibit high full specific discharge capacity,excellent rate capability and cycle stability,namely it delivers a high specific full discharge capacity of 8878μAh cm^(-2),runs steadily from 10 to 100μA cm^(-2),and performs a stable long-term cycling behavior(>1050 h)under a high energy efficiency of 84%and a low charge voltage of approximately 3.4 V at 20μA cm^(-2)within 100μAh cm^(-2).In addition,a flexible Li-CO_(2)pouch cell is constructed to reveal the potential of employing CIS to fabricate flexible high energy storage devices in practical applications.This work shows a promising development pathway toward next-generation sustainable energy storage devices.

Insight into pyrolysis of hydrophobic silica aerogels:Kinetics,reaction mechanism and effect on the aerogels

Silica aerogels have promising applications in thermal insulation,but their flammability and reaction mechanisms have rarely been investigated.The pyrolysis kinetics and thermodynamics of hydrophobic silica aerogels under N_(2) environment were studied.The kinetic and thermodynamic parameters were obtained by three model-free methods.Based on the calculated kinetic parameters,the pyrolysis mechanism of silica aerogels was discussed by the master plots method.The results indicate that the reactions of the whole pyrolysis phase can be characterized by a random nuclear model.In addition,FTIR test results show that the volatile products of silica aerogel pyrolysis are mainly hydrocarbons generated by the decomposition of hydrophobic groups(methyl groups)on the surface.Finally,the effects of pyrolysis on the properties of silica aerogels Finally,the effects of pyrolysis on the properties of silica aerogels were investigated based on the analysis results of SEM,specific surface area,pore size distribution,X-ray diffraction,XPS and infrared spectroscopy.

Study on the catalytic degradation of sodium lignosulfonate to aromatic aldehydes over nano-CuO:Process optimization and reaction kinetics

As one of the few renewable aromatic resources,the research of depolymerization of lignin into highvalue chemicals has attracted extensive attention in recent years.Catalytic wet aerobic oxidation(CWAO)is an effective technology to convert lignin like sodium lignosulfonate(SL),a lignin derivative,into aromatic aldehydes such as vanillin and syringaldehyde.However,how to improve the yield of aromatic aldehyde and conversion efficiency is still a challenge,and many operating conditions that significantly affect the yield of these aromatic compounds have rarely been investigated systematically.In this work,we adopted the stirred tank reactor(STR)for the CWAO process with nano-CuO as catalyst to achieve the conversion of SL into vanillin and syringaldehyde.The effect of operating conditions including reaction time,oxygen partial pressure,reaction temperature,SL concentration,rotational speed,catalyst amount,and NaOH concentration on the yield of single phenolic compound was systematically investigated.The results revealed that all these operating conditions exhibit a significant effect on the aromatic aldehyde yield.Therefore,they should be regulated in an optimal value to obtain high yield of these aldehydes.More importantly,the reaction kinetics of the lignin oxidation was explored.This work could provide basic data for the optimization and design of industrial operation of lignin oxidation.

Kinetics of the direct reaction between ozone and phenol by high-gravity intensified heterogeneous catalytic ozonation

In this study,high-gravity intensified heterogeneous catalytic ozonation is utilized for treatment of phenol-containing wastewater,and the kinetics of the direct reaction between ozone and phenol in the presence of excess tertiary butanol(TBA)is investigated.It is revealed that the direct reaction between ozone and phenol in the rotating packed bed(RPB)follows the pseudo-first-order kinetics with a reaction rate constant higher than that in the conventional bubbling reactor(BR).Under different conditions of temperature,initial pH,high-gravity factor,and gaseous ozone concentration,the apparent reaction rate constant varies in the range of 0.0160–0.115 min-1.An empirical power-exponential model is established to characterize the effects of these parameters on the direct reaction between ozone and phenol by high-gravity intensified heterogeneous catalytic ozonation.

Evaluation and application of kinetic models for Cu-catalyzed acetylene hydrochlorination

The development of environmentally friendly catalysts has become a top priority for acetylene hydrochlorination.However,difficulties remain in systematic studies on the applicability of kinetic models for the industrialization of Cu-based catalysts.Therefore,a strategy involving reactor modeling,parameter estimation,and model testing is developed to evaluate the predictive ability of kinetic models.In order to search for reliable and widely applicable reaction kinetic models for Cu-based catalysts,a case study is conducted.Multiple possible kinetic models derived from the power law,adsorption mechanism,and reaction path are sifted through collecting and testing activity data from tens of Cu-based catalysts.Different optimum applicable ranges of these kinetic models are presented.According to the comparative analysis on their applications in various industrial scenarios,this research suggests that kinetic models derived from reaction path exhibits the best extrapolation ability and has the greatest potential for application in the scale-up design of reactors.

Modulation of Electronic States in Bimetallic-doped Nitrogen-Carbon Based Nanoparticles for Enhanced Oxygen Reduction Kinetics

Controlling the local electronic structure of active ingredients to improve the adsorption desorption characteristics of oxygen-containing intermediates over the electrochemical liquid-solid interfaces is a critical challenge in the field of oxygen reduction reaction(ORR)catalysis.Here,we offer a simple approach for modulating the electronic states of metal nanocrystals by bimetal co-doping into carbon-nitrogen substrate,allowing us to modulate the electronic structure of catalytic active centers.To test our strategy,we designed a typical bimetallic nanoparticle catalyst(Fe-Co NP/NC)to flexibly alter the reaction kinetics of ORR.Our results from synchrotron Xray absorption spectroscopy and X-ray photoelectron spectroscopy showed that the co-doping of iron and cobalt could optimize the intrinsic charge distribution of Fe-Co NP/NC catalyst,promoting the oxygen reduction kinetics and ultimately achieving remarkable ORR activity.Consequently,the carefully designed Fe-Co NP/NC exhibits an ultra-high kinetic current density at the operating voltage(71.94 mA/cm^(2)at 0.80 V),and the half-wave potential achieves 0.915 V,which is obviously better than that of the corresponding controls including Fe NP/NC,Co NP/NC.Our findings provide a unique perspective for optimizing the electronic structure of active centers to achieve higher ORR catalytic activity and faster kinetics.

Approaching Ultimate Synthesis Reaction Rate of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

Nickel-rich layered oxide LiNi_(x)Co_(y)MnzO_(2)(NCM,x+y+z=1)is the most promising cathode material for high-energy lithium-ion batteries.However,conventional synthesis methods are limited by the slow heating rate,sluggish reaction dynamics,high energy consumption,and long reaction time.To overcome these chal-lenges,we first employed a high-temperature shock(HTS)strategy for fast synthesis of the NCM,and the approaching ultimate reaction rate of solid phase transition is deeply investigated for the first time.In the HTS process,ultrafast average reaction rate of phase transition from Ni_(0.6)Co_(0.2)Mn_(0.2)(OH)_(2) to Li-containing oxides is 66.7(%s^(-1)),that is,taking only 1.5 s.An ultrahigh heating rate leads to fast reaction kinetics,which induces the rapid phase transition of NCM cathodes.The HTS-synthesized nickel-rich layered oxides perform good cycling performances(94%for NCM523,94%for NCM622,and 80%for NCM811 after 200 cycles at 4.3 V).These findings might also assist to pave the way for preparing effectively Ni-rich layered oxides for lithium-ion batteries.

Kinetics of the Reaction Between Ozone and Cationic Red X-GRL

The ozonation of Cationic Red X-GRL in a semi-batch reactor was studied with variation of the gas flow rate, initial Cationic Red X-GRL concentration, temperature, and pH value. By the evaluation of the liquid mass transfer coefficient, the interfacial area, and the stoichiometric ratio between ozone and Cationic Red X-GRL, the rate constants and the kinetic regime of the reaction between ozone and Cationic Red X-GRL were investigated by applying the experimental data to a model based on the film mass transfer theory. The results obtained support a second order overall reaction, first order with respect to both ozone and dye, and the rate constants were correlated by a modified Arrhenius Equation of temperature and pH value with activation energy of 18.06kJ·mol-1. Hatta number of the reaction was found to be between 0.026 and 0.041, it indicates that the reaction occurs in the liquid bulk, corresponding to the slow kinetic regime.

Effect of montmorillonite on kinetics of polyurethane preparation reaction

The prepolymerization and curing reaction kinetics of polyurethane/montmorillonite have been studied with end group analysis and FTIR respectively. It was found that the prepolymerization and curing reaction followed the 2nd-order kinetics. But the activation energy of prepolymerization increased from 42.7 kJ/mol to 56.5 kJ/rnol after the montmorillonite was added in the reaction system, and activation energy of curing reaction decreased from 64.4 kJ/mol to 17.5 kJ/mol. 2007 Bing Liao. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Thermal Behavior,Nonisothermal Decomposition Reaction Kinetics of Mixed Ester Double-base Gun Propellants

The thermal decomposition behavior and nonisothermal reaction kinetics of the double-base gun propellants containing the mixed ester of triethyleneglycol dinitrate（TEGDN） and nitroglycerin（NG） were investigated by thermogravimetry（TG） and differential thermogravimetry（DTG）, and differential scanning calorimetry（DSC） under the high-pressure dynamic ambience. The results show that the thermal decomposition processes of the mixed nitric ester gun propellants have two mass-loss stages. Nitric ester evaporates and decomposes in the first stage, and nitrocellulose and centralite II（C2） decompose in the second stage. The mass loss, the DTG peak points, and the terminated temperatures of the two stages are changeable with the difference of the mass ratio of TEGDN to NG. There is only one obvious exothermic peak in the DSC curves under the different pressures. With the increase in the furnace pressure, the peak temperature decreases, and the decomposition heat increases. With the increase in the content of TEGDN, the decomposition heat decreases at 0.1 MPa and rises at high pressure. The variety of mass ratio of TEGDN to NG makes few effect on the exothermic peak temperatures in the DSC curves at different pressures. The kinetic equation of the main exothermal decomposition reaction of the gun propellant TG0601 was determined as： dα/dt=1021.59（1-α）3e-2.60×104/T. The reaction mechanism of the process can be classified as chemical reaction. The critical temperatures of the thermal explosion（Tbe and Tbp） obtained from the onset temperature（Te） and the peak temperature（Tp） are 456.46 and 473.40 K, respectively. ΔS≠, ΔH≠, and ΔG≠ of the decomposition reaction are 163.57 J·mol^-1·K^-1, 209.54 kJ·mol^-1, and 133.55 kJ·mol^-1, respectively.

Kinetics and mechanism of titanium hydride powder and aluminum melt reaction

Based on the measurement of the released hydrogen gas pressure （PH2）, the reaction kinetics between TiH2 powder and pure aluminum melt was studied at various temperatures. After cooling the samples, the interface of TiH2 powder and aluminum melt was studied. The results show that the-time curves have three regions; in the first and second regions, the rate of reaction conforms zero and one order, respectively; in the third region, the hydrogen gas pressure remains constant and the rate of reaction reaches zero. The main factors that control the rate of reaction in the first and second regions are the penetration of hydrogen atoms in the titanium lattice and the chemical reaction between molten aluminum and titanium, respectively. According to the main factors that control the rate of reaction, three temperature ranges are considered for the reaction mechanism： （a） 700-750°C, （b） 750-800°C, and （c） 800-1000°C. In the first temperature range, the reaction is mostly under the control of chemical reaction; at the temperature range of 750 to 800°C, the reaction is controlled by the diffusion and chemical reaction; at the third temperature range （800-1000°C）, the dominant controlling mechanism is diffusion.

Empirical correction of kinetic model for polymer thermal reaction process based on first order reaction kinetics

Based on the theory of first-order reaction kinetics,a thermal reaction kinetic model in integral form has been derive.To make the model more applicable,the effects of time and the conversion degree on the reaction rate parameters were considered.Two types of undetermined functions were used to compensate for the intrinsic variation of the reaction rate,and two types of correction methods are provided.The model was explained and verified using published experimental data of different polymer thermal reaction systems,and its effectiveness and wide adaptability were confirmed.For the given kinetic model,only one parameter needs to be determined.The proposed empirical model is expected to be used in the numerical simulation of polymer thermal reaction process.

Synthesis of Toluene-2,4-Bisurea from 2,4-Toluene Diamine and Urea and the Reaction Kinetics

Toluene-2,4-bisurea (TBU) is an important intermediate for urea route to dimethyl toluene-2,4-dicarbamate and the study on TBU synthesis via the reaction of 2,4-toluene diamine (TDA) and urea is of great significance. Firstly, thermodynamic analysis shows that the reaction is exothermic and a high equilibrium conversion of TDA is expected due to its large reaction equilibrium constant. Secondly, under the suitable reaction conditions, 130 °C, 7 h, and molar ratio of TDA/zinc acetate/urea/sulfolane 1/0.05/3.5/10, TDA conversion is 54.3%, and TBU yield and selectivity are 39.8% and 73.3% respectively. Lastly, the synthesis of TBU is a 1st order reaction with respect to TDA and the reaction kinetics model is established. This work will provide useful information for commercializing the urea route to toluene-2,4-dicarbamate (TDC).

Reaction condition optimization and kinetic investigation of roasting zinc oxide ore using (NH_4)_2SO_4

An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of（NH_4）_2SO_4/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric-differential thermal analysis was used for（NH_4）_2SO_4 and zinc mixed in a molar ratio of 1.4：1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle-Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained.

Mechanism and Kinetics Analysis of NO/SO_2/N_2/O_2 Dissociation Reactions in Non-Thermal Plasma

The kinetics mechanism of the dissociation reactions in a NO/SO2/N2/O2 system was investigated in consideration of energetic electrons＇ impacts on a non-thermal plasma. A model was derived from the Boltzmann equation and molecule collision theory to predict the dissociation reaction rate coefficients. Upon comparison with available literature, the model was confirmed to be acceptably accurate in general. Several reaction rate coefficients of the NO/SO2/N2/O2 dissociation system were derived according to the Arrhenius formula. The activation energies of each plasma reaction were calculated by quantum chemistry methods. The relation between the dissociation reaction rate coefficient and electron temperature was established to describe the importance of each reaction and to predict relevant processes of gaseous chemical reactions. The sensitivity of the mechanism of NO/SO2/N2/O2 dissociation reaction in a non-thermal plasma was also analysed.

Decomposition reaction kinetics of Baotou RE concentrate with concentrated sulfuric acid at low temperature

Baotou RE concentrate was decomposed with concentrated sulfuric acid by controlling the roasting temperature below 500℃.Thermogravimetry-differential thermal analysis（TG-DTA） and chemical analytical methods were used to study the thermal decomposition process and the thermal decomposition effect.The Freeman-Carroll method was applied to analyze the TG-DTA curves.The activation energy, reaction order, and reaction frequency factor at different stages were calculated.The Satava method was used to deduce the reaction mechanism and the relative reaction rate during the thermal decomposition process.

Mapping the kinetics of hydrogen evolution reaction on Ag via pseudo-single-crystal scanning electrochemical cell microscopy

Elucidating the structure-activity relationship in electrocatalysis is of fundamental interest for electrochemical energy conversion and storage.However,the heterogeneity in the surface structure of electrocatalysts,including the presence of various facets,poses an analytical challenge in revealing the true structure-activity relationship because the activity is conventionally measured on ensemble,resulting in an averaged activity that cannot be unequivocally associated with a single structural motif.Scanning electrochemical cell microscopy(SECCM)[1]combined with colocalized electron backscatter diffraction(EBSD)offers a direct way to reveal the correlative local electrochemical and structural information.Herein,we measured the hydrogen evolution reaction(HER)activity on Ag and its dependence on the crystal orientation.From the combined EBSD and SECCM mapping,it is found that Ag grains closer to{111}show a higher exchange current density,while those closer to{110}show a lower Tafel slope.The Tafel slope is also found to decrease with the step density increase.The ability to measure the electrocatalytic activity under a high mass-transfer rate allows us to reveal the activity difference at a high current density(up to 200 mA/cm^(2)).The approach reported here can be expanded to other systems to reveal the nature of active sites of electrocatalysis.

Kinetic Studies on Axial Coordination Reaction of Tetraphenylporphinatocobalt（Ⅱ） Chloride

he axial coordination reactions of tetraphenylporphinatocobalt (Ⅲ) chloride(Co TPPC1) with various imidazoles RIm ( HIm . imidazole; Melm , 2-methylimida-zole) were investigated in acetone and dichloromethand solvents at different temper-atures. The reaction mechanisms were proposed and the differences between experi-mental results in the two solvents h ave been interpreted using the proposed mecha-nisms and rate equations for the first time , and the reaction scheme for the axial re-action of the metalloporphyrin has been developed. Hydrogen bonding plays an im-portant role in the reactions. The effects of various imidazoles for these reactionsand the solvents are reported. The comparison between iron and cobalt porphyrinsin the kinetics are discussed.

Chemical Kinetic Aspects of Solid State Reaction Producing Wollastonite from Rice Husk Silica and Limestone

An industrial mineral wollastonite (CaSiO3) was produced under solid state conditions from rice husk silica and limestone. Reaction was carried out at 900'C to 1300'C for 1 h. The product batches were subjected to XRD and chemical analysis techniques specific for wollastonite. Mole fractions of different product batches were calculated on the basis of accumulated data to study the kinetics. Specific rate constants and reaction rate were also found out. Various probable models of mechanism for reaction were considered and testified with the laid down criterion for suggesting the suitable one. The resulting data were treated with Arrhenius equation as well and activation energy was calculated--therefrom. In addition to finding it's value from the slope of Arrhenius curve, an alternate method was also applied for this purpose. Both of the values were observed to be comparable. The activation energy required for performed reaction was found to be almost one third of that reported for synthesizing CaSiO3 by using quartz. This referred to the economical preparation of wollastonite by using rice husk as a source of silica instead of quartz.