An approach to estimate tree height using PolInSAR data constructed by the Sentinel-1 dual-pol SAR data and RVoG model

We estimate tree heights using polarimetric interferometric synthetic aperture radar(PolInSAR)data constructed by the dual-polarization(dual-pol)SAR data and random volume over the ground(RVoG)model.Considering the Sentinel-1 SAR dual-pol(SVV,vertically transmitted and vertically received and SVH,vertically transmitted and horizontally received)configuration,one notes that S_(HH),the horizontally transmitted and horizontally received scattering element,is unavailable.The S_(HH)data were constructed using the SVH data,and polarimetric SAR(PolSAR)data were obtained.The proposed approach was first verified in simulation with satisfactory results.It was next applied to construct PolInSAR data by a pair of dual-pol Sentinel-1A data at Duke Forest,North Carolina,USA.According to local observations and forest descriptions,the range of estimated tree heights was overall reasonable.Comparing the heights with the ICESat-2 tree heights at 23 sampling locations,relative errors of 5 points were within±30%.Errors of 8 points ranged from 30%to 40%,but errors of the remaining 10 points were>40%.The results should be encouraged as error reduction is possible.For instance,the construction of PolSAR data should not be limited to using SVH,and a combination of SVH and SVV should be explored.Also,an ensemble of tree heights derived from multiple PolInSAR data can be considered since tree heights do not vary much with time frame in months or one season.

Exploration of the Construction and Path Selection of the Deep Integration Model of Industry-Education in Universities

Against the backdrop of continuous development in the field of education,universities are encouraged to innovate their talent cultivation systems and objectives.The deep integration of industry and education has emerged as an effective strategy,aligning with the basic requirements of the new engineering education initiative and exerting a positive impact on socioeconomic development.However,an analysis of the current state of industry-education integration in universities reveals several issues that require optimization,affecting the ultimate effectiveness of integration.To optimize this phenomenon and achieve high-quality development,universities need to further explore the construction of a deep integration model of industry and education,adhering to corresponding principles to form a comprehensive system.On this basis,pathways for deep industry-education integration can be summarized.

A Building Information Modeling-Life Cycle Cost Analysis Integrated Model to Enhance Decisions Related to the Selection of Construction Methods at the Conceptual Design Stage of Buildings

Life Cycle Cost Analysis (LCCA) provides a systematic approach to assess the total cost associated with owning, operating, and maintaining assets throughout their entire life. BIM empowers architects and designers to perform real-time evaluations to explore various design options. However, when integrated with LCCA, BIM provides a comprehensive economic perspective that helps stakeholders understand the long-term financial implications of design decisions. This study presents a methodology for developing a model that seamlessly integrates BIM and LCCA during the conceptual design stage of buildings. This integration allows for a comprehensive evaluation and analysis of the design process, ensuring that the development aligns with the principles of low carbon emissions by employing modular construction, 3D concrete printing methods, and different building design alternatives. The model considers the initial construction costs in addition to all the long-term operational, maintenance, and salvage values. It combines various tools and data through different modules, including energy analysis, Life Cycle Assessment (LCA), and Life Cycle Cost Analysis (LCCA) to execute a comprehensive assessment of the financial implications of a specific design option throughout the lifecycle of building projects. The development of the said model and its implementation involves the creation of a new plug-in for the BIM tool (i.e., Autodesk Revit) to enhance its functionalities and capabilities in forecasting the life-cycle costs of buildings in addition to generating associated cash flows, creating scenarios, and sensitivity analyses in an automatic manner. This model empowers designers to evaluate and justify their initial investments while designing and selecting potential construction methods for buildings, and enabling stakeholders to make informed decisions by assessing different design alternatives based on long-term financial considerations during the early stages of design.

基于改进24Model-ISM-SNA建筑工人不安全行为关联路径研究

建筑施工现场环境复杂,为有效控制不安全行为发生,基于行为安全“2-4”模型对360份具有代表性的建筑安全事故调查报告进行分析,提取出22个不安全行为的主要影响因素。利用灰色关联分析方法(GRA)改进的集成ISM-SNA模型,将不安全行为风险因素划分为表层、过渡层与深层,然后对风险因素进行可视化分析、中心度分析及凝聚子群分析,揭示了各致因因素间的关联关系和传导路径。结果表明,建筑工人不安全行为影响因素可划分成7级3阶的多级递阶结构,安全意识、现场监管、外部环境是建筑工人不安全行为的关键影响因素,同时现场监管和隐患排查到位能有效降低不安全行为的发生。

Safety Risk Assessment of Overturning Construction of Towering Structure Based on Cloud Matter–Element Coupled Model

Rapid urbanization has led to a surge in the number of towering structures,and overturning is widely used because it can better accommodate the construction of shaped structures such as variable sections.The complexity of the construction process makes the construction risk have certain randomness,so this paper proposes a cloudbased coupled matter-element model to address the ambiguity and randomness in the safety risk assessment of overturning construction of towering structures.In the pretended model,the digital eigenvalues of the cloud model are used to replace the eigenvalues in the matter–element basic element,and calculate the cloud correlation of the risk assessment metrics through the correlation algorithm of the cloud model to build the computational model.Meanwhile,the improved hierarchical analysis method based on the cloud model is used to determine the weight of the index.The comprehensive evaluation scores of the evaluation event are then obtained through the weighted average method,and the safety risk level is determined accordingly.Through empirical analysis,(1)the improved hierarchical analysis method based on the cloud model can incorporate the data of multiple decisionmakers into the calculation formula to determine theweights,which makes the assessment resultsmore credible;(2)the evaluation results of the cloud-basedmatter-element coupledmodelmethod are basically consistent with those of the other two commonly used methods,and the confidence factor is less than 0.05,indicating that the cloudbased physical element coupled model method is reasonable and practical for towering structure overturning;(3)the cloud-based coupled element model method,which confirms the reliability of risk level by performing Spearman correlation on comprehensive assessment scores,can provide more comprehensive information of instances compared with other methods,and more comprehensively reflects the fuzzy uncertainty relationship between assessment indexes,which makes the assessment results more realistic,scientific and reliable.

Enhanced Constructability Using 4D Plus Modelling in Brownfield Sites

In the oil and gas industry, operations in greenfield sites are straightforward. However, there are increased risks, such as damage to existing facilities, unknown site conditions, and other complexities in brownfield sites. In addition to these physical risks, task scheduling is also complex, as vessels need to be replaced during a turnaround. To mitigate the risks of site conditions and realize a truncated schedule for Saudi Aramco’s operations, 3D laser scanning was combined with 3D modeling, clash detection, and time. This integrated approach minimized the shutdown period, which resulted in cost savings, heightened safety, and enhanced stakeholder communications.

Research on Welding Quality Traceability Model of Offshore Platform Block Construction Process

Quality traceability plays an essential role in assembling and welding offshore platform blocks.The improvement of the welding quality traceability system is conducive to improving the durability of the offshore platform and the process level of the offshore industry.Currently,qualitymanagement remains in the era of primary information,and there is a lack of effective tracking and recording of welding quality data.When welding defects are encountered,it is difficult to rapidly and accurately determine the root cause of the problem from various complexities and scattered quality data.In this paper,a composite welding quality traceability model for offshore platform block construction process is proposed,it contains the quality early-warning method based on long short-term memory and quality data backtracking query optimization algorithm.By fulfilling the training of the early-warning model and the implementation of the query optimization algorithm,the quality traceability model has the ability to assist enterprises in realizing the rapid identification and positioning of quality problems.Furthermore,the model and the quality traceability algorithm are checked by cases in actual working conditions.Verification analyses suggest that the proposed early-warningmodel for welding quality and the algorithmfor optimizing backtracking requests are effective and can be applied to the actual construction process.

3D Model Construction and Ecological Environment Investigation on a Regional Scale Using UAV Remote Sensing

The acquisition of digital regional-scale information and ecological environmental data has high requirements for structural texture,spatial res-olution,and multiple parameter categories,which is challenging to achieve using satellite remote sensing.Considering the convenient,facilitative,and flexible characteristics of UAV(unmanned air vehicle)remote sensing tech-nology,this study selects a campus as a typical research area and uses the Pegasus D2000 equipped with a D-MSPC2000 multi-spectral camera and a CAM3000 aerial camera to acquire oblique images and multi-spectral data.Using professional software,including Context Capture,ENVI,and ArcGIS,a 3D(three-dimensional)campus model,a digital orthophoto map,and multi-spectral remote sensing map drawing are realized,and the geometric accuracy of typical feature selection is evaluated.Based on a quantitative remote sensing model,the campus ecological environment assessment is performed from the perspectives of vegetation and water body.The results presented in this study could be of great significance to the scientific management and sustainable development of regional natural resources.

Prediction of Total Output Value of Construction Industry in Jiangxi Province Based on Grey Prediction Model

In order to realize the accurate prediction of the total output value of construction industry in the future,the grey prediction model is used to compare the measured value with the predicted value from 2012 to 2021,and based on the existing data,the total output value of construction industry in Jiangxi Province in the next five years is predicted.The results show that the grey prediction model has a good prediction effect,and the error between the predicted value and the measured value is within 14%,which provides a basis for policy adjustment and resource optimization.

Constructing Teaching Model for Training English Guides of Stone Inscription Relics

A teaching model based on constructivism is proposed in this paper. The model contains five teaching steps, e.g. interpretation teaching, questioning- dialogue, knowledge and skills teaching, discussion- collaboration and field training. Practice proves that it can effectively improve the training efficiency of the training of English guides of stone inscription relics and enhance their interpretation quality and English skills.

Scheme of Constructing CGE Model of China's Direct Grain Subsidy Policy

This paper introduces the model of China's direct grain subsidy policy, adopts computable general equilibrium (CGE) theory, and advances the scheme of constructing the model of China's direct grain subsidy policy. On the basis of some assumptions, such as conforming to the complete competition of market, inexistence of move of capital and labor forces among countries, unchanged exchange rate and incomplete substitution, and the main body of behavior comprising representative households, producers, local government and central government, the model established in this paper includes production module and demand module. Moreover, the model takes into account equilibrium structure, the definition of profiting and macro condition for closure, the related coefficients this CGE model needs include Armingtion substitution elasticity of intermediate composite product, investment composite product and consumption composite product between import and domestic production; substitution elasticity among production factors; conversion elasticity of total sales between domestic absorption and export; elasticity of residents' expenditure; elasticity of price; elasticity of export demand; the relative share of all sectors in capital stock. This paper also points out the advantages and limitations of CGE model in analyzing direct grain subsidy policy.

A Case Study in Complex Concrete Construction in Australia:A Hybrid Approach of Hand and Machine

This paper describes and provides a critique of the design and implementation of the“scoops”-a set of bespoke multifunctioning architectural free-form elements that are a highlight of the new Soheil Abedian School of Architecture at Bond University,Australia,by the office of Sir Peter Cook and Gavin Robotham,CRAB(Cook Robotham Architecture Bureau,London).The development includes the transfer of analogue design processes into digital 3d modeling,which is then analyzed and rationalized via an exchange with consultants and procurement contractors.The complexity of the concrete works necessitated the use of digital fabrication to make their implementation affordable and within time constraints,with said complexity creating a variety of challenges for many aspects of the entire delivery team.The 3d model played a critical role in communicating intent and accuracy at all stages.The use of site-based craftsmanship combined with computer aided design and fabrication overlapped to realize the project.

Cultivating Interdisciplinary Talents of Foreign Language by Constructing“EGP+ESP”Teaching Model

English for Specific Purposes(ESP) is an inevitable trend for reform of college English teaching. The paper is on the basis of theories on ESP teaching. Based on extensive investigation, it analyzes the main problems in current college English teaching which is EGP-oriented(English for General Purpose) and the necessity of teaching model"EGP + ESP"is demonstrated in this paper. Moreover, it discusses specific measures on how to conduct teaching reform on the combination of"EGP and ESP"from five aspects including faculty construction, selection of teaching materials, curriculum design, teaching model, evaluation system in order to change students' general dissatisfaction for college English teaching and achieve the goal to cultivate interdisciplinary talents of foreign language for society.

Self-Constructing Neural Network Modeling and Control of an AGV

Tracking precision of pre-planned trajectories is essential for an auto-guided vehicle (AGV). The purpose of this paper is to design a self-constructing wavelet neural network (SCWNN) method for dynamical modeling and control of a 2-DOF AGV. In control systems of AGVs, kinematical models have been preferred in recent research documents. However, in this paper, to enhance the trajectory tracking performance through including the AGV’s inertial effects in the control system, a learned dynamical model is replaced to the kinematical kind. As the base of a control system, the mathematical models are not preferred due to modeling uncertainties and exogenous inputs. Therefore, adaptive dynamic and control models of AGV are proposed using a four-layer SCWNN system comprising of the input, wavelet, product, and output layers. By use of the SCWNN, a robust controller against uncertainties is developed, which yields the perfect convergence of AGV to reference trajectories. Owing to the adaptive structure, the number of nodes in the layers is adjusted in online and thus the computational burden of the neural network methods is decreased. Using software simulations, the tracking performance of the proposed control system is assessed.

基于24model的建筑施工机械伤害事故脆弱性分析

为预防建筑施工机械伤害事故,本研究采用事故致因2-4模型(24model)和复杂网络理论(CN)对施工机械事故进行分析整理。首先采用24model梳理86起典型机械事故报告中各层次事故的致因,对伤害事故中的安全管理体系、习惯性行为、不安全动作和不安全物态进行定性分析;随后根据复杂网络理论构建风险要素网络模型,通过网络攻击的手段找到导致事故的关键要素。研究结果表明:未经允许冒险作业、无相关施工资质、作业环境恶劣是事故关键致因。通过对关键节点的防控,可有效提升建筑施工安全水平。

Near-surface velocity model construction based on a Monte-Carlo scheme

In tomographic statics seismic data processing, it 1s crucial to cletermme an optimum base for a near-surface model. In this paper, we consider near-surface model base determination as a global optimum problem. Given information from uphole shooting and the first-arrival times from a surface seismic survey, we present a near-surface velocity model construction method based on a Monte-Carlo sampling scheme using a layered equivalent medium assumption. Compared with traditional least-squares first-arrival tomography, this scheme can delineate a clearer, weathering-layer base, resulting in a better implementation of damming correction. Examples using synthetic and field data are used to demonstrate the effectiveness of the proposed scheme.

Construction of Risk Assessment Application Model of Epidemic Disease in Large-scale Pig Farms

The application model of epidemic disease assessment technology for Web-based large-scale pig farm was expounded from the identification of epidemic disease risk factors, construction of risk assessment model and development of risk assessment system. The assessed pig farm uploaded the epidemic disease risk data information through on-line answering evaluating questionnaire to get the immediate evaluation report. The model could enhance the risk communication between pig farm veterinarian, manager and veterinary experts to help farm system understand and find disease risk factors, assess and report the potential high risk items of the pig farm in the three systems of engineering epidemic disease prevention technology, biological safety and immune monitoring, and promote the improvement and perfection of epidemic disease prevention and control measures.

Permanent deformation and prediction model of construction and demolition waste under repeated loading

This study aims to reveal the macroscopic permanent deformation(PD)behavior and the internal structural evolution of construction and demolition waste(CDW)under loading.Firstly,the initial matric suction of CDW was measured by the filter paper method.Secondly,the PD of CDW with different humidity and stress states was investigated by repeated load triaxial tests,and a comprehensive prediction model was established.Finally,the discrete element method was performed to analyze the internal structural evolution of CDW during deformation.These results showed that the VAN-GENUCHTEN model could describe the soil-water characteristic curve of CDW well.The PD increases with the increase of the deviator stress and the number of cyclic loading,but the opposite trend was observed when the initial matric suction and confining pressure increased.The proposed model in this study provides a satisfactory prediction of PD.The discrete element method could accurately simulate the macroscopic PD of CDW,and the shear force,interlock force and sliding content increase with the increase of deviator stress during the deformation.The research could provide useful reference for the deformation stability analysis of CDW under cyclic loading.

Construction and visualization of 3D vacant place model

The method of building 3D model was discussed at first. Aiming at the feature of mine vacant place,a method to build the 3D vacant place model based on multi TIN (triangular irregular network) was put forward, and the data structure and visualization of vacant place were discussed. Then some crucial technologies of realizing function in 3D-GIS were proposed. In addition,the software about special 3D mapping and assaying was introduced.

Modeling on Residence Time Distribution in Subsurface Flow Constructed Wetlands by Multi Flow Dispersion Model

As an important design factor for constructed wetlands,hydraulic retention time and its distribution will affect the treatment performance.Instantaneously injected sodium chloride tracers were used to obtain residence time distributions of the lab scale subsurface flow constructed wetland.Considering the presence of trailing and multiple peaks of the tracer breakthrough curve,the multi flow dispersion model(MFDM)was used to fit the experimental tracer breakthrough curves.According to the residual sum of squares and comparison between the experimental values and simulated values of the tracer concentration,MFDM could fit the residence time distribution(RTD)curve satisfactorily,the results of which also reflected the layered structure of wetland cells,thus to give reference for application of MFDM to the same kind of subsurface flow constructed wetlands.