基于4D-Label-free技术慢性弥漫性轴索损伤大鼠海马组织的蛋白质组学分析

目的筛选慢性弥漫性轴索损伤(DAI)大鼠海马组织差异表达蛋白(DEPs),为探索慢性DAI潜在发病机制以及临床诊断、筛选药物治疗靶点、评估预后等提供实验依据。方法实验动物分为模型组(DAI组,n=20)和对照组(CON组,n=20),采用改良的Marmarou法建立SD大鼠DAI模型,模型建立3周后利用4D-Label-free技术检测慢性DAI组脑海马组织中的蛋白图谱变化,以DAI组/CON组表达量变化倍数(FC)>1.2或<0.83且P<0.05筛选DEPs,运用基因本体(GO)功能注释和京都基因与基因百科全书(KEGG)通路富集分析方法对筛选的DEPs进行生物信息学分析。结果共筛选出92个DEPs,上调52个,下调40个。GO分析结果显示,DEPs主要涉及去磷酸化,ATP合成耦合电子传递,过氧化氢介导的细胞程序性死亡的正向调节及神经递质受体内化等生物过程功能。KEGG通路分析结果提示,DEPs主要参与代谢途径、活性氧、神经变性途径-多种疾病、逆行内源性大麻素信号传导、谷胱甘肽代谢等信号通路。结论通过4D-Label-free技术筛选出了慢性DAI组大鼠海马组织中的DEPs。所筛选出的DEPs及其所富集的生物过程和信号通路为慢性DAI的深入研究提供依据。

基于label-free定量蛋白质组学方法筛选沉默CHAF1B基因后心肌细胞差异表达蛋白及调控网络分析

目的分析沉默染色质装配因子1亚基B(chromatin assembly factor 1 subunit B,CHAF1B)基因后心肌细胞中差异表达蛋白,预测CHAF1B基因调控网络,为寻找促进心肌细胞修复的潜在治疗靶点提供参考。方法采用转染和蛋白质印迹法筛选沉默CHAF1B基因的有效小干扰RNA(small interfering RNA,siRNA)。应用有效siRNA沉默人源心肌AC16细胞CHAF1B基因后,采用细胞活力检测方法检测细胞活力;提取总蛋白质进行定量、还原、烷基化和胰蛋白酶裂解成肽段,利用高效液相串联质谱法鉴定肽段;搜索UniProt蛋白库筛选差异表达的蛋白质进行基因本体(Gene Ontology,GO)富集分析、京都基因与基因组百科全书(Kyoto Encyclopedia of Genes and Genomes,KEGG)通路富集和蛋白质互作网络(protein-protein interaction networks,PPI)分析。结果siRNA有效沉默CHAF1B基因后,心肌细胞存活明显受到抑制;label-free定量蛋白质组学方法鉴定结果显示,共有69个差异表达蛋白质,其中50个表达显著上调(差异倍数≥2,P<0.05),19个表达显著下调(差异倍数≤0.5,P<0.05)。GO分析显示,差异表达蛋白质主要参与大分子复合亚基体、细胞组分生物合成和组装等生物学过程,分布在细胞质和囊泡等区域,发挥蛋白质结合等分子功能。KEGG通路富集和PPI分析显示,差异表达蛋白质参与的信号通路包括蛋白酶体、氨酰tRNA生物合成、胞吞、嘧啶代谢和氨基酸生物合成等10条信号途径;表达显著上调的蛋白质如蛋白酶体亚单位A2和B7、26 S蛋白酶体调节亚单位6B和10B参与蛋白酶体途径,丝氨酸、甘氨酸、谷氨酰胺和赖氨酸tRNA合成酶介导氨酰tRNA生物合成;表达显著下调的蛋白质包括骨架相关蛋白2/3复合体亚单位3和热休克70蛋白1样参与胞吞作用,核糖核苷-二磷酸还原酶大亚基介导嘧啶代谢等通路。实时荧光定量聚合酶链式反应结果证实,转染CHAF1B siRNA后心肌细胞中合成骨架相关蛋白2/3复合体亚单位3的基因ARPC3和氨酰tRNA生物合成关键基因QARS1的mRNA水平均显著降低。结论CHAF1B为心肌细胞存活的关键蛋白质,参与调控心肌细胞的胞吞和氨基酸生物合成等多种生物学过程,参考其调控网络可帮助寻找促进心肌细胞修复的干预环节。

基于Label-free技术的非小细胞肺癌蛋白质差异研究

目的 基于非小细胞肺癌(non-small-cell lung cancer,NSCLC)及与其配对的非癌性邻近组织(non-cancerous adjacent tissues,NATs)的蛋白质组学分析,寻找NSCLC诊断相关蛋白标志物。方法 应用非标记定量蛋白组学(LFP)技术,以NSCLC患者配对的NATs为对照,对5例NSCLC患者进行癌组织蛋白质组学分析。以差异倍数>1.5(上调)或<0.67(下调)且P<0.05为标准筛选差异蛋白。应用String网站和R语言对差异蛋白进行基因本体论(gene ontology,GO)分析、京都基因和基因组百科全书(Kyoto Encyclopedia of Genes and Genomes,KEGG)分析,为进一步研究提供良好基础。结果 本研究发现差异蛋白共644个,其中339个蛋白表达上调,305个蛋白表达下调。PCA结果显示,差异蛋白可明显区分NSCLC与NATs。GO分析结果表明,差异蛋白大多以细胞外泌体的形式存在且主要富集于调节胞外分泌、胞外分泌、骨髓细胞激活参与免疫反应等的生物学过程以及钙粘着蛋白绑定、细胞外基质绑定等的分子功能。KEGG分析结果显示,差异蛋白主要富集在抗坏血酸和醛酸代谢、组氨酸代谢、蛋白质消化吸收、丙酮酸代谢等通路(P<0.05)。结论 NSCLC与NATs存在明显差异,可为发现NSCLC新型标志物提供线索。

基于Label-free技术的高州油茶铝胁迫蛋白质组学研究

【目的】南方地区拥有大面积的酸性红壤,导致土壤中铝元素多以离子的形式溶出,严重抑制油茶的生长及高产。研究采用Label-free技术探究高州油茶在铝胁迫下的蛋白质组学响应,为揭示高州油茶应答铝胁迫的分子响应机制奠定了理论基础。【方法】以高州油茶两年生实生苗为试验材料,测定不同浓度铝处理条件下高州油茶叶片部分代谢指标及抗氧化生理相关指标,同时比较对照组(CK)和4 mmol/L铝处理组(GZ4)差异蛋白质的表达。【结果】生理试验结果表明,不同浓度铝胁迫下油茶幼苗都会发生氧化胁迫导致细胞活性氧(ROS)积累,2 mmol/L铝浓度下油茶叶片通过增加渗透调节物质含量和增强多种抗氧化酶活性以清除细胞活性氧,使细胞免受氧化胁迫的损害;而4 mmol/L铝浓度下叶片丙二醛(MDA)含量和脯氨酸(PRO)含量明显升高,积累的活性氧超出了自身所能清除的范围,叶片可溶性糖含量和可溶性蛋白含量显著减少,抗氧化酶活性均有不同程度减弱,油茶正常的生理功能受到抑制。蛋白质组学数据表明,CK组和GZ4组共鉴定到4282个蛋白质,与CK组相比,GZ4处理组有207个蛋白质的表达丰度显著增加,129个蛋白质的表达丰度显著降低。差异表达蛋白质的通路富集和蛋白质互作网络分析结果表明,4 mmol/L铝胁迫下高州油茶主要通过提高谷胱甘肽代谢,增强细胞清除活性氧和自由基负离子的能力缓解铝胁迫造成的氧化损伤;4 mmol/L铝浓度下高州油茶蛋白质合成和光合作用受到明显抑制,抗氧化酶活性减弱可能与细胞供能能力不足有关。【结论】铝胁迫下高州油茶主要通过能量及碳水化合物代谢、氨基酸合成及代谢、生物碱合成、蛋白质加工、卟啉和叶绿素代谢等代谢途径抵抗铝毒。

Constraints on Characteristics and Distribution of Gas Hydrate and Free Gas Using Broad-Band Processing of Three-Dimensional Seismic Data

Gas hydrate drilling expeditions in the Pearl River Mouth Basin,South China Sea,have identified concentrated gas hydrates with variable thickness.Moreover,free gas and the coexistence of gas hydrate and free gas have been confirmed by logging,coring,and production tests in the foraminifera-rich silty sediments with complex bottom-simulating reflectors(BSRs).The broad-band processing is conducted on conventional three-dimensional(3D)seismic data to improve the image and detection accuracy of gas hydratebearing layers and delineate the saturation and thickness of gas hydrate-and free gas-bearing sediments.Several geophysical attributes extracted along the base of the gas hydrate stability zone are used to demonstrate the variable distribution and the controlling factors for the differential enrichment of gas hydrate.The inverted gas hydrate saturation at the production zone is over 40% with a thickness of 90 m,showing the interbedded distribution with different boundaries between gas hydrate-and free gas-bearing layers.However,the gas hydrate saturation value at the adjacent canyon is 70%,with 30-m-thick patches and linear features.The lithological and fault controls on gas hydrate and free gas distributions are demonstrated by tracing each gas hydrate-bearing layer.Moreover,the BSR depths based on broad-band reprocessed 3D seismic data not only exhibit variations due to small-scale topographic changes caused by seafloor sedimentation and erosion but also show the upward shift of BSR and the blocky distribution of the coexistence of gas hydrate and free gas in the Pearl River Mouth Basin.

GLOBAL SOLUTIONS TO 1D COMPRESSIBLE NAVIER-STOKES/ALLEN-CAHN SYSTEM WITH DENSITY-DEPENDENT VISCOSITY AND FREE-BOUNDARY

This paper is concerned with the Navier-Stokes/Allen-Cahn system,which is used to model the dynamics of immiscible two-phase flows.We consider a 1D free boundary problem and assume that the viscosity coefficient depends on the density in the form ofη(ρ)=ρ^(α).The existence of unique global H^(2m)-solutions(m∈N)to the free boundary problem is proven for when 0<α<1/4.Furthermore,we obtain the global C^(∞)-solutions if the initial data is smooth.

母体产前血清AFP、Freeβ-HCG、uE3检测对筛查胎儿染色体异常的临床价值

目的探讨产前母体血清甲胎蛋白(AFP)、游离β绒毛膜促性腺激素(Free-β-HCG)、雌三醇(uE3)检测对筛查胎儿染色体异常的临床价值。方法选取我院2021年9月—2023年3月100例高风险孕妇进行无创DNA检测,根据染色体状态分为阳性组、阴性组。对比2组孕12周时血清AFP、Freeβ-HCG、uE3及NT值水平,Logistic回归分析血清各指标对胎儿染色体异常的影响因素;ROC分析孕12周时血清各指标联合检测对胎儿染色体异常的预测价值。结果阳性组孕12周时血清AFP、uE3均低于阴性组、血清Freeβ-HCG及NT值均高于阴性组(P<0.05);分析认为孕12周时血清AFP、uE3为胎儿染色体异常的保护因素、Freeβ-HCG及NT值为胎儿染色体异常的危险因素(P<0.05);ROC分析孕12周时检测母体血清AFP、Freeβ-HCG、uE3水平对预测胎儿染色体异常的AUC分别为0.654、0.673、0.664,其联合检测对预测胎儿染色体异常的AUC为0.717。结论产前母体血清AFP、Freeβ-HCG、uE3联合检测在胎儿染色体异常的筛查中均具有较高的预测价值,3者联合检测的预测效能更高,可广泛应用于早期临床筛查中。

Free radicals trigger the closure of open pores in lignin-derived hard carbons toward improved sodium-storage capacity

The chemical activation of various precursors is effective for creating additional closed pores in hard carbons for sodium storage.However,the formation mechanism of closed pores under the influence of pore-forming agents is not well understood.Herein,an effective chemical activation followed by a high-temperature self-healing strategy is employed to generate interconnected closed pores in lignin-derived hard carbon(HCs).By systematic experimental design combined with electron paramagnetic res-onance spectroscopy,it can be found that the content of free radicals in the carbon matrix influences the closure of open pores at high temperatures.Excessively high activation temperature(>700 C)leads to a low free radical concentration,making it difficult to achieve self-healing of open pores at high tempera-tures.By activation at 700°C,a balance between pore making and self-healing is achieved in the final hard carbon.A large number of free radicals triggers rapid growth and aggregation of carbon microcrys-tals,blocking pre-formed open micropores and creating additional interconnected closed pores in as-obtained hard carbons.As a result,the optimized carbon anode(LK-700-1300)delivers a high reversible capacity of 330.8 mA h g^(-1) at 0.03 A g^(-1),which is an increase of 86 mA h g^(-1) compared to the pristine lignin-derived carbon anode(L-700-1300),and exhibits a good rate performance(202.1 mA h g^(-1) at 1 A g^(-1)).This work provides a universal and effective guidance for tuning closed pores of hard carbons from otherprecursors.

Metagenomic analysis revealing the metabolic role of microbial communities in the free amino acid biosynthesis of Monascus rice vinegar during fermentation

Free amino acid(FAA)is the important component of vinegar that infl uences quality perception and consumer acceptance.FAA is one of the major metabolites produced by microorganisms;however,the microbial metabolic network on FAA biosynthesis remains unclear.Through metagenomic analysis,this work aimed to elucidate the roles of microbes in FAA biosynthesis during Monascus rice vinegar fermentation.Taxonomic profiles from functional analyses showed 14 dominant genera with high contributions to the metabolism pathways.The metabolic network for FAA biosynthesis was then constructed,and the microbial distribution in different metabolic pathways was illuminated.The results revealed that 5 functional genera were closely involved in FAA biosynthesis.This study illuminated the metabolic roles of microorganisms in FAA biosynthesis and provided crucial insights into the functional attributes of microbiota in vinegar fermentation.

CONVEXITY OF THE FREE BOUNDARY FOR AN AXISYMMETRIC INCOMPRESSIBLE IMPINGING JET

This paper is devoted to the study of the shape of the free boundary for a threedimensional axisymmetric incompressible impinging jet.To be more precise,we will show that the free boundary is convex to the fluid,provided that the uneven ground is concave to the fluid.

Yolk free egg substitute improves the serum phospholipid profile of mice with metabolic syndrome based on lipidomic analysis

In this study,the impacts of egg consumption on mice model of metabolic syndrome(Met S)were comparatively investigated.Mice were divided into five groups(n=8):normal diet group(ND),high-fat diet group(HFD),HFD with whole egg group(WE),HFD with free-yolk egg substitute group(YFES),and HFD with lovastatin group(Lov).Main biochemical indexes and a non-targeted lipidomic analysis were employed to insight the lipid profile changes in serum.It was revealed that WE could significantly improve serum biochemical indexes by reducing body weight,low-density lipoprotein cholesterol(LDL-C)and total cholesterol(TC),while increasing high-density lipoprotein cholesterol.YFES exhibited remarkably better performance in increasing phosphatidylglycerol and phosphatidic acids,while decreasing phosphatidylinositol than WE.A total of 50 differential lipids biomarkers tightly related to glycerophospholipids metabolism were screened out.Carnitine C18:2 and C12:1,SM(d18:0/12:0),and SM(d18:1/14:1)were significantly upregulated in YFES compared to WE.YFES reduced expression of SREBP-1c and Cpt1a,while did not affect the expression of PPAR-α.Sphingomyelin biomarkers were positively related to the TC(|r|>0.6),while PPAR-αwas negatively correlated with triglyceride and LDL-C levels.To sum up,YFES attenuated HFD-induced Met S by improving the serum phospholipids,which account for its modulation of glycerophospholipid metabolism.

Practical operating flexibility of a bifunctional freestanding membrane for efficient anion exchange membrane water electrolysis across all current ranges

This study explores a symmetric configuration approach in anion exchange membrane(AEM)water electrolysis,focusing on overcoming adaptability challenges in dynamic conditions.Here,a rapid and mild synthesis technique for fabricating fibrous membrane-type catalyst electrodes is developed.Our method leverages the contrasting oxidation states between the sulfur-doped NiFe(OH)2 shell and the metallic Ni core,as revealed by electron energy loss spectroscopy.Theoretical evaluations confirm that the S–NiFe(OH)_(2) active sites optimize free energy for alkaline water electrolysis intermediates.This technique bypasses traditional energy-intensive processes,achieving superior bifunctional activity beyond current benchmarks.The symmetric AEM water electrolyzer demonstrates a current density of 2 A cm^(-2) at 1.78 V at 60℃ in 1 M KOH electrolyte and also sustains ampere-scale water electrolysis below 2.0 V for 140 h even in ambient conditions.These results highlight the system's operational flexibility and structural stability,marking a significant advance-ment in AEM water electrolysis technology.

Lithium-Metal Free Sulfur Battery Based on Waste Biomass Anode and Nano-Sized Li_(2)S Cathode

The realization of a stable lithium-metal free(LiMF)sulfur battery based on amorphous carbon anode and lithium sulfide(Li_(2)S)cathode is here reported.In particular,a biomass waste originating full-cell combining a carbonized brewer's spent grain(CBSG)biochar anode with a Li_(2)S-graphene composite cathode(Li_(2)S70Gr30)is proposed.This design is particularly attractive for applying a cost-effective,high performance,environment friendly,and safe anode material,as an alternative to standard graphite and metallic lithium in emerging battery technologies.The anodic and cathodic materials are characterized in terms of structure,morphology and composition through X-ray diffraction,scanning and transmission electron microscopy,X-ray photoelectron and Raman spectroscopies.Furthermore,an electrochemical characterization comprising galvanostatic cycling,rate capability and cyclic voltammetry tests were carried out both in half-cell and full-cell configurations.The systematic investigation reveals that unlike graphite,the biochar electrode displays good compatibility with the electrolyte typically employed in sulfur batteries.The CBSG/Li_(2)S70Gr30 full-cell demonstrates an initial charge and discharge capacities of 726 and 537 mAh g^(-1),respectively,at 0.05C with a coulombic efficiency of 74%.Moreover,it discloses a reversible capacity of 330 mAh g^(-1)(0.1 C)after over 300 cycles.Based on these achievements,the CBSG/Li_(2)S70Gr30 battery system can be considered as a promising energy storage solution for electric vehicles(EVs),especially when taking into account its easy scalability to an industrial level.

USP19 Stabilizes TAK1 to Regulate High Glucose/Free Fatty Acid-induced Dysfunction in HK-2 Cells

Objective Obesity-induced kidney injury contributes to the development of diabetic nephropathy(DN).Here,we identified the functions of ubiquitin-specific peptidase 19(USP19)in HK-2 cells exposed to a combination of high glucose(HG)and free fatty acid(FFA)and determined its association with TGF-beta-activated kinase 1(TAK1).Methods HK-2 cells were exposed to a combination of HG and FFA.USP19 mRNA expression was detected by quantitative RT-PCR(qRT-PCR),and protein analysis was performed by immunoblotting(IB).Cell growth was assessed by Cell Counting Kit-8(CCK-8)viability and 5-ethynyl-2′-deoxyuridine(EdU)proliferation assays.Cell cycle distribution and apoptosis were detected by flow cytometry.The USP19/TAK1 interaction and ubiquitinated TAK1 levels were assayed by coimmunoprecipitation(Co-IP)assays and IB.Results In HG+FFA-challenged HK-2 cells,USP19 was highly expressed.USP19 knockdown attenuated HG+FFA-triggered growth inhibition and apoptosis promotion in HK-2 cells.Moreover,USP19 knockdown alleviated HG+FFA-mediated PTEN-induced putative kinase 1(PINK1)/Parkin pathway inactivation and increased mitochondrial reactive oxygen species(ROS)generation in HK-2 cells.Mechanistically,USP19 stabilized the TAK1 protein through deubiquitination.Importantly,increased TAK1 expression reversed the USP19 knockdown-mediated phenotypic changes and PINK1/Parkin pathway activation in HG+FFA-challenged HK-2 cells.Conclusion The findings revealed that USP19 plays a crucial role in promoting HK-2 cell dysfunction induced by combined stimulation with HG and FFAs by stabilizing TAK1,providing a potential therapeutic strategy for combating DN.

A novel efficient energy absorber with free inversion of a metal foam-filled circular tube

In this paper, a novel efficient energy absorber with free inversion of a metal foam-filled circular tube(MFFCT) is designed, and the axial compressive behavior of the MFFCT under free inversion is studied analytically and numerically. The theoretical analysis reveals that the energy is mainly dissipated through the radial bending of the metal circular tube, the circumferential expansion of the metal circular tube, and the metal filled-foam compression. The principle of energy conservation is used to derive the theoretical formula for the minimum compressive force of the MFFCT over free inversion under axial loading. Furthermore, the free inversion deformation characteristics of the MFFCT are analyzed numerically. The theoretical steady values are found to be in good agreement with the results of the finite element(FE) analysis. The effects of the average diameter of the metal tube, the wall thickness of the metal tube, and the filled-foam strength on the free inversion deformation of the MFFCT are considered. It is observed that in the steady deformation stage, the load-carrying and energy-absorbing capacities of the MFFCT increase with the increase in the average diameter of the metal tube, the wall thickness of the metal tube, or the filled-foam strength. The specific energy absorption(SEA) of free inversion of the MFFCT is significantly higher than that of the metal tube alone.

Exponential Time Differencing Method for a Reaction-Diffusion System with Free Boundary

For reaction-diffusion equations in irregular domains with moving boundaries,the numerical stability constraints from the reaction and diffusion terms often require very restricted time step sizes,while complex geometries may lead to difficulties in the accuracy when discretizing the high-order derivatives on grid points near the boundary.It is very challenging to design numerical methods that can efficiently and accurately handle both difficulties.Applying an implicit scheme may be able to remove the stability constraints on the time step,however,it usually requires solving a large global system of nonlinear equations for each time step,and the computational cost could be significant.Integration factor(IF)or exponential time differencing(ETD)methods are one of the popular methods for temporal partial differential equations(PDEs)among many other methods.In our paper,we couple ETD methods with an embedded boundary method to solve a system of reaction-diffusion equations with complex geometries.In particular,we rewrite all ETD schemes into a linear combination of specificФ-functions and apply one state-of-the-art algorithm to compute the matrix-vector multiplications,which offers significant computational advantages with adaptive Krylov subspaces.In addition,we extend this method by incorporating the level set method to solve the free boundary problem.The accuracy,stability,and efficiency of the developed method are demonstrated by numerical examples.

Estimation of free core nutation parameters and availability of computing options

The Earth’s Free Core Nutation(FCN) causes Earth tides and forced nutation with frequencies close to the FCN that exhibit resonance effects.High-precision superconducting gravimeter(SG) and very long baseline interferometry(VLBI) provide good observation techniques for detecting the FCN parameters.However,some choices in data processing and solution procedures increase the uncertainty of the FCN parameters.In this study,we analyzed the differences and the effectiveness of weight function and ocean tide corrections in the FCN parameter detection using synthetic data,SG data from thirty-one stations,and the 10 celestial pole offset(CPO) series.The results show that significant discrepancies are caused by different computing options for a single SG station.The stacking method,which results in a variation of0.24-5 sidereal days(SDs) in the FCN period(T) and 10^(3)-10^(4) in the quality factor(Q) due to the selection of the weighting function and the ocean tide model(OTM),can effectively suppress this influence.The statistical analysis results of synthetic data shows that although different weight choices,while adjusting the proportion of diurnal tidal waves involved,do not significantly improve the accuracy of fitted FCN parameters from gravity observations.The study evaluated a series of OTMs using the loading correction efficiency.The fitting of FCN parameters can be improved by selecting the mean of appropriate OTMs based on the evaluation results.Through the estimation of the FCN parameters based on the forced nutation,it was found that the weight function P_(1) is more suitable than others,and different CPO series(after 2009) resulted in a difference of 0.4 SDs in the T and of 103 in the Q.We estimated the FCN parameters for SG(T=430.4±1.5 SDs and Q=1.52×10^(4)±2.5×10^(3)) and for VLBI(T=429.8±0.7 SDs,Q=1.88×10^(4)±2.1×10^(3)).

Method of fabricating artificial rock specimens based on extrusion free forming(EFF)3D printing

Three-dimensional(3D)printing technology has been widely used to create artificial rock samples in rock mechanics.While 3D printing can create complex fractures,the material still lacks sufficient similarity to natural rock.Extrusion free forming(EFF)is a 3D printing technique that uses clay as the printing material and cures the specimens through high-temperature sintering.In this study,we attempted to use the EFF technology to fabricate artificial rock specimens.The results show the physico-mechanical properties of the specimens are significantly affected by the sintering temperature,while the nozzle diameter and layer thickness also have a certain impact.The specimens are primarily composed of SiO_(2),with mineral compositions similar to that of natural rocks.The density,uniaxial compressive strength(UCS),elastic modulus,and tensile strength of the printed specimens fall in the range of 1.65–2.54 g/cm3,16.46–50.49 MPa,2.17–13.35 GPa,and 0.82–17.18 MPa,respectively.It is capable of simulating different types of rocks,especially mudstone,sandstone,limestone,and gneiss.However,the simulation of hard rocks with UCS exceeding 50 MPa still requires validation.

Study on Free-Standing Riser Under Different Working Conditions Based on 3D Co-Rotational Beam Element

When the free standing riser(FSR)is in service in the ocean,its mechanical properties are affected by various factors,including complex ocean current forces,buoyancy of the buoyancy can,and torque caused by the deflection of the upper floating body.These loads have a great influence on the deformation and internal force of the FSR.The static performance of FSR is investigated in this research under various working conditions.The finite element model of FSR is established based on the co-rotational method.The arc length approach is used to solve the model.The load is exerted in increments.The current load on the riser changes with the configuration of the riser.The accuracy of the numerical method is verified by Abaqus software.The calculation time is also compared.Then,the effects of uniform current,actual current and floating body yaw motion on FSR are studied by parameter analysis.Additionally,the influence of the FSR on the ocean current after the failure of part of the buoyancy can chamber is analyzed.The results show that the numerical model based on the co-rotational method can effectively simulate the large rotation and torsion behavior of FSR.This method has high computational efficiency and precision,and this method can quickly improve the efficiency of numerical calculation of static analysis of deep-water riser.The proposed technology may serve as an alternative to the existing proprietary commercial software,which uses a complex graphical user interface.

Investigation of the Interaction Between the Free Surface and A Semi/Shallowly Submerged Underwater Vehicle

The present study aims to investigate the interaction between the free surface and a semi/shallowly submerged underwater vehicle,especially when the submergence depth h is smaller than 0.75D(D:submarine maximum diameter).In this respect,the straight-ahead simulations of the generic SUBOFF underwater vehicle geometry are conducted with constant forward velocities using the Unsteady Reynolds-Averaged Navier-Stokes(URANS)equations with a Shear-Stress Transport(SST)k-ωturbulence model in commercial code Fluent,at submergence depths and Froude numbers ranging from h=0 to h=3.3D and from Fn=0.205 to Fn=0.512,respectively.The numerical models are verified against the existing experimental data.The analysis of the obtained results indicates that in the case of the semi and shallowly submerged underwater vehicle(UV),both the submergence depth and forward velocity have a great effect on the behaviors of hydrodynamic forces acting on the UV.The magnitude of maximum total resistance may reach almost five times the value of resistance exerted on the totally submerged hull.Both the forces acting on the UV and the generated waves when the submergence depth h is smaller than 0.75D are significantly different from those whenr h is larger than 0.75D.The conclusions can be used as reference for future research on near free surface motions of underwater vehicles and the design of small water-plane area twin hull.