Quantitative effect of kerogen type on the hydrocarbon generation potential of Paleogene lacustrine source rocks,Liaohe Western Depression,China

Kerogen types exert a decisive effect on the onset and capacity of hydrocarbon generation of source rocks.Lacustrine source rocks in the Liaohe Western Depression are characterized by thick deposition,high total organic carbon(TOC)content,various kerogen types,and a wide range of thermal maturity.Consequently,their hydrocarbon generation potential and resource estimation can be misinterpreted.In this study,geochemical tests,numerical analysis,hydrocarbon generation kinetics,and basin modeling were integrated to investigate the differential effects of kerogen types on the hydrocarbon generation potential of lacustrine source rocks.Optimized hydrocarbon generation and expulsion(HGE)models of different kerogen types were established quantitatively upon abundant Rock-Eval/TOC/vitrinite reflectance(R_(o))datasets.Three sets of good-excellent source rocks deposited in the fourth(Es4),third(Es3),and first(Es1)members of Paleogene Shahejie Formation,are predominantly types I-II_(1),II_(1)-II_(2),and II-III,respectively.The activation energy of types I-II_(2)kerogen is concentrated(180-230 kcal/mol),whereas that of type III kerogen is widely distributed(150-280 kcal/mol).The original hydrocarbon generation potentials of types I,II_(1),II_(2),and III kerogens are 790,510,270,and 85 mg/g TOC,respectively.The Ro values of the hydrocarbon generation threshold for type I-III source rocks gradually increase from 0.42%to 0.74%,and Ro values of the hydrocarbon expulsion threshold increase from 0.49%to 0.87%.Types I and II_(1)source rocks are characterized by earlier hydrocarbon generation,more rapid hydrocarbon expulsion,and narrower hydrocarbon generation windows than types II_(2)and III source rocks.The kerogen types also affect the HGE history and resource potential.Three types(conventional,tight,and shale oil/gas)and three levels(realistic,expected,and prospective)of hydrocarbon resources of different members in the Liaohe Western Depression are evaluated.Findings suggest that the Es3 member has considerable conventional and unconventional hydrocarbon resources.This study can quantitatively characterize the hydrocarbon generation potential of source rocks with different kerogen types,and facilitate a quick and accurate assessment of hydrocarbon resources,providing strategies for future oil and gas exploration.

The coupling control of biological precursors and environmental factors onβ-carotane enrichment in alkaline lacustrine source rocks:A case study from the Fengcheng formation in the western Junggar Basin,NW China

The organic-rich mudstones and dolostones of the Permian Fengcheng Formation(Fm.)are typically alkaline lacustrine source rocks,which are typified by impressively abundantβ-carotane.Abundant β-carotane has been well acknowledged as an effective indicator of biological sources or depositional environments.However,the specific biological sources of β-carotane and the coupling control of biological sources and environmental factors on the enrichment of β-carotane in the Fengcheng Fm.remains obscure.Based on a comprehensive investigation of the bulk,molecular geochemistry,and organic petrology of sedimentary rocks and the biochemistry of phytoplankton in modern alkaline lakes,we proposed a new understanding of the biological precursors of β-carotane and elucidated the enrichment mechanism of β-carotane in the Fengcheng Fm.The results show that the biological precursors crucially control the enrichment of β-carotane in the Fengcheng Fm.The haloalkaliphilic cyanobacteria are the primary biological sources of β-carotane,which is suggested by a good positive correlation between the 2-methylhopane index,7-+8-methyl heptadecanes/C_(max),C_(29%),and β-carotane/C_(max)in sedimentary rocks and the predominance of cyanobacteria with abundantβ-carotene in modern alkaline lakes.The enrichment of β-carotane requires the reducing condition,and the paleoredox state that affects the enrichment of β-carotane appears to have a threshold.The paleoclimate conditions do not considerably impact the enrichment of β-carotane,but they have some influence on the water's paleosalinity by affecting evaporation and precipitation.While it does not directly affect the enrichment of β-carotane in the Fengcheng Fm.,paleosalinity does have an impact on the cyanobacterial precursor supply and the preservation conditions.

Investigation of the Petrological and Geochemical Characteristics of Siderite in the Early Cretaceous Sandstone of Lacustrine Sedimentary Sequence in the Erlian Basin from Northeastern China

Siderite is a prevalent authigenic mineral in siliciclastic rocks, which usually occurred in eodiagensis period and could be used as an indicator of sedimentary environment. Some siderite precipitated in burial depth with geochemical information of basin fluid evolution. The crystal morphology, geochemical composition, and isotope values are influenced by physical and geochemical environment of precipitation. In this study, samples from the Early Cretaceous of Erlian basin in the northwestern China were collected, and mineralogy, bulk and in-situ geochemistry, C and O isotopes were analyzed to comprehensively investigate the sedimentary and diagenetic environment that the sediments experienced. Six lithofaices with three types of crystal habits were recognized in the siderite-rich sandstone, bundle crystal in spherical forms, blocky rhombs in intergranular pore and cleavage of muscovite, and micro bundle and mosaic crystals aggregates in nodular. The siderite growth proceeds through micro bundle and mosaic crystals to bundle siderite aggregates and then into blocky rhombs. The crystal evolution is also reflected by geochemical composition. The micro bundle and mosaic crystals are Casiderite. The spheritic shaped bundle aggregates are Ca-Mn-siderite. The blocky rhomb siderite shows gray part and bight part with Ca, Mg and Mn varies. Increase of Ca in block rhomb siderite suggests burial and mesodiagenesis, the high content of Mn may have linkage with eogenetic effects. The relatively positive and slightly negative δ13C value indicates meteoric water domination and influence of organic matter evolution in shallow buried time. The narrow ranges negative δ18O value suggest a small span of temperature of siderite formation.

Effect of petroleum chemical fraction and residual oil content in saline lacustrine organic-rich shale: A case study from the Paleogene Dongpu Depression of North China

Halite and gypsum minerals in saline shale make the retention mechanism and chemical fractionation of residual oil unique. The Dongpu Depression in North China is a typically saline lacustrine basin with developing halite and gypsum. The effect of gypsum minerals on residual oil content and chemical fractionation remains unclear. In this study, shale samples with different gypsum contents were used in organic geochemical experiments, showing that the high total organic matter (TOC) content and type II kerogen leads to a high residual oil content, as shown by high values of volatile hydrocarbon (S1) and extractable organic matter (EOM). XRD and FE-SEM result indicate that the existence of gypsum in saline shale contributes to an enhanced pore space and a higher residual oil content in comparison to non-gypsum shale. Additionally, the increase in the gypsum mineral content leads to an increase in the saturated hydrocarbon percentage and a decrease in polar components percentage (resins and asphaltene). Furthermore, thermal simulation experiments on low-mature saline shale show that the percentage of saturated hydrocarbons in the residual oil is high and remains stable and that the storage space is mainly mesoporous (> 20 nm) in the oil expulsion stage. However, the saturated hydrocarbons percentage decreases rapidly, and oil exists in mesopores (> 20 nm and < 5 nm) in the gas expulsion stage. In general, gypsum is conducive to the development of pore space, the adsorption of hydrocarbons and the occurrence of saturated hydrocarbon, leading to large quantities of residual oil. The data in this paper should prove to be reliable for shale oil exploration in saline lacustrine basins.

Subaqueous volcanic eruptive facies,facies model and its reservoir significance in a continental lacustrine basin:A case from the Cretaceous in Chaganhua area of southern Songliao Basin,NE China

The conventional lithofacies and facies model of subaerial and marine pyroclastic rocks cannot reflect the characteristics of subaqueous volcanic edifice in lacustrine basins.In order to solve this problem,the lithofacies of subaqueous eruptive pyroclastic rocks is discussed and the facies model is established by taking the tuff cone of Cretaceous Huoshiling Formation in the Chaganhua area of the Changling fault depression,Songliao Basin as the research object.The results indicate that the subaqueous eruptive pyroclastic rocks in the Songliao Basin can be divided into two facies and four subfacies.The two facies are the subaqueous explosive facies and the volcanic sedimentary facies that is formed during the eruption interval.The subaqueous explosive facies can be further divided into three subfacies:gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies.The volcanic sedimentary facies consists of pyroclastic sedimentary rocks containing terrigenous clast subfacies.A typical facies model of the tuff cone that is formed by subaqueous eruptions in the Songliao Basin was established.The tuff cone is generally composed of multiple subaqueous eruption depositional units and can be divided into two facies associations:near-source facies association and far-source facies association.The complete vertical succession of one depositional unit of the near-source facies association is composed of pyroclastic sedimentary rocks containing terrigenous clast subfacies,gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies from bottom to top.The depositional unit of the far-source facies association is dominated by the subaqueous fallout subfacies and contains several thin interlayered deposits of the water-laid density current subfacies.The gas-supported hot pyroclastic flow subfacies and the pyroclastic sedimentary rocks containing terrigenous clast subfacies are favorable subaqueous eruptive facies for reservoirs in continental lacustrine basins.

Hydrocarbon generation and organic matter enrichment of limestone in a lacustrine mixed sedimentary environment: A case study of the Jurassic Da'anzhai member in the central Sichuan Basin, SW China

The hydrocarbon generation effectiveness of lacustrine limestone has been gradually proven. The Da'anzhai Member limestone is the most important Jurassic oil-producing layer in the central Sichuan Basin, and the characteristics of limestone organic matter are often overlooked. 175 typical samples of different lithologies from 19 wells were systematically analyzed to determine hydrocarbon generation, controlling factors and formation models by analyses of organic matter, minerals, elements, isotopes and petrography. (1) Lacustrine paleoenvironments can be beneficial for the enrichment of organic matter in limestone. A favorable environment would be a quiet, low-energy zone in a warm and humid climate with an appropriate supply of terrestrial inputs. (2) Lacustrine limestone has a higher organic matter conversion rate, and a lower hydrocarbon generation threshold than argillaceous source rocks, and can be effective source rock. (3) The mud-bearing shell limestone from the forebeach to the lake slope is thick, with a relatively high abundance of organic matter, and its hydrocarbon generation is effective. This study can clarify the effectiveness and enrichment of the limestone organic matters in the study area, and contribute to an understanding of hydrocarbon generation for full-rock system in a lacustrine mixed sedimentary environment.

Lacustrine sedimentary responses to earthquakes—soft-sediment deformation structures since late Pleistocene:A review of current understanding

The traces left by earthquakes in lacustrine sediments are studied to determine the occurrence of ancient earthquakes by identifying seismically induced soft-sediment deformation structures(SSDS).Dating can help reconstruct the relative frequency of earthquakes.Identifying seismically induced seismites,which carry abundant seismic information from numerous SSDS,is both critical and challenging.Studying the deformation mechanism of SSDS and learning about the common criteria of seismically induced SSDS improve the identification of earthquake triggers.With better research into SSDS,seismic events can be effectively captured,and temporal constraints can be carried out by 14C dating and optically stimulated luminescence(OSL)dating to identify and date the occurrence of ancient earthquakes.The present contribution primarily addresses the meaning and mechanism of SSDS and their relationship with earthquake magnitude as well as the common criteria of the SSDS induced by earthquakes.

Effects of deep alkaline and acidic fluids on reservoir developed in fault belt of saline lacustrine basin

Through the long development processes of reservoir sedimentation and diagenesis, acidic and alkaline fluids play key roles in controlling deep reservoir development. However, the ways in which deep fluids control and transform the reservoir under complex fault conditions remain unclear. In this study, a 2D model was established based on a typical sub-salt to intra-salt vertical profile in the Qaidam Basin, China. Based on measured data, multiphase flow reaction and solute transport simulation technology were used to analyze fluids flow and migration in the intra-salt and sub-salt reservoirs, determine the mineral dissolution, precipitation, and transformation in the reservoir caused by the deep fluids, and calculate the changes in reservoir porosity. Results show that deep fluid migrates preferentially along dominant channels and triggers a series of fluid–rock chemical reactions. In the first stage, a large amount of anhydrite precipitated in the fault as a result of upward migration of deep saline fluid, resulting in the formation of anhydrite veins and blockage at the base of the fault. In the second stage, organic acids caused minerals dissolution and a vertical channel was opened in previously blocked area, which promoted continuous upward migration of organic acids and the formation of secondary pores. This study clarifies the transformative effects of deep alkaline and acidic fluids on the reservoir. Moreover, the important fluid transport role of faults and their effect on reservoir development were determined.

Maceral evolution of lacustrine shale and its effects on the development of organic pores during low mature to high mature stage:A case study from the Qingshankou Formation in northern Songliao Basin,northeast China

Organic matter(OM)hosted pores are crucial for the storage and migration of petroleum in shale reservoirs.Thermal maturity and macerals type are important factors controlling the development of pores therein.In this study,six lacustrine shale samples with different thermal maturities from the first member of the Qingshankou Formation in the Songliao Basin,of which vitrinite reflectance(R_(o))ranging from 0.58% to 1.43%,were selected for a comparative analysis.Scanning electron microscopy(SEM)and reflected light microscopy were combined to investigate the development of organic pores in different macerals during thermal maturation.The results show that alginite and liptodetrinite are the dominant primary macerals,followed by bituminite.Only a few primary organic pores developed in the alginite at the lowest maturity(R_(o)=0.58%).As a result of petroleum generation,oil-prone macerals began to transform to initial-oil solid bitumen at the early oil window(R_(o)=0.73%)and shrinkage cracks were observed.Initial-oil solid bitumen cracked to oil,gas and post-oil bitumen by primary cracking(R_(o)=0.98%).Moreover,solid bitumen(SB)was found to be the dominant OM when R_(o)>0.98%,which indicates that SB is the product of oil-prone macerals transformation.Many secondary bubble pores were observed on SB,which formed by gas release,while devolatilization cracks developed on migrated SB.Additionally,at the late oil window(Ro?1.16%),migrated SB filled the interparticle pore spaces.With further increase in temperature,the liquid oil underwent secondary cracking into pyrobitumen and gas,and spongy pores developed on the pyrobitumen at higher levels of maturity(Ro=1.43%),which formed when pyrobitumen cracked into gas.Vitrinite and inertinite are stable without any visible pores over the range of maturities,verifying their low petroleum generation potential.In addition,it was concluded that clay minerals could have a catalytic effect on the petroleum generation,which may explain why organicclay mixtures had more abundant pores than single OM particles.However,after R_(o)>0.98%,authigenic minerals occupied the organic pore spaces on the organic-clay mixtures,resulting in fewer pores compared to those observed in samples at the early to peak oil window.

Sedimentary Processes and Depositional Characteristics of Coarse-grained Subaqueous Fans along Steep Slopes in a Lacustrine Rift Basin:A Case Study from the Dongying Depression,Bohai Bay Basin,China

Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restricts efficient exploration and development.Coarse-grained subaqueous fans in the Yong′an area,Dongying Depression,are investigated in this study.These fans include nearshore subaqueous fans,and sublacustrine fans,and their sedimentary processes,depositional patterns and distribution characteristics are mainly controlled by tectonic activity and paleogeomorphology.Nearshore subaqueous fans developed near the boundary fault during the early–middle deposition stage due to strong tectonic activity and large topographic subsidence.Early sublacustrine fans developed at the front of the nearshore subaqueous fans in the area where the topography changed from gentle to steep along the source direction.While the topography was gentle,sublacustrine fans did not develop.During the late weak tectonic activity stage,late sublacustrine fans developed with multiple stages superimposed.Frequent fault activity and related earthquakes steepened the basin margin,and the boundary fault slopes were 25.9°–34°.During the early–middle deposition stage,hyperpycnal flows triggered by outburst floods developed.During the late deposition stage,with weak tectonic activity,seasonal floods triggered hyperpycnal flows,and hybrid event beds developed distally.

Petroleum geochemistry and origin of shallow-buried saline lacustrine oils in the slope zone of the Mahu sag, Junggar Basin, NW China

Recently, significant oil discoveries have been made in the shallower pay zones of the Jurassic Badaowan Formation (J_(1)b) in the Mahu Sag, Junggar Basin, Northwest China. However, little work has been done on the geochemical characteristics and origins of the oil in the J_(1)b reservoir. This study analyzes 44 oil and 14 source rock samples from the area in order to reveal their organic geochemical characteristics and the origins of the oils. The J_(1)b oils are characterized by a low Pr/Ph ratio and high β-carotene and gammacerane indices, which indicate that they were mainly generated from source rocks deposited in a hypersaline environment. The oils are also extremely enhanced in C_(29) regular steranes, possibly derived from halophilic algae. Oil-source correlation shows that the oils were derived from the Lower Permian Fengcheng Formation (P_(1)f) source rocks, which were deposited in a strongly stratified and highly saline water column with a predominance of algal/bacterial input in the organic matter. The source rocks of the Middle Permian lower-Wuerhe Formation (P_(2)w), which were deposited in fresh to slightly saline water conditions with a greater input of terrigenous organic matter, make only a minor contribution to the J_(1)b oils. The reconstruction of the oil accumulation process shows that the J_(1)b oil reservoir may have been twice charged during Late Jurassic–Early Cretaceous and the Paleogene–Neogene, respectively. A large amount volume of hydrocarbons generated in the P_(1)f source rock and leaked from T_(1)b oil reservoirs migrated along faults connecting source beds and shallow-buried secondary faults into Jurassic traps, resulting in large-scale accumulations in J_(1)b. These results are crucial for understanding the petroleum system of the Mahu Sag and will provide valuable guidance for petroleum exploration in the shallower formations in the slope area of the sag.

Mixed carbonate rocks lithofacies features and reservoirs controlling mechanisms in a saline lacustrine basin in Yingxi area,Qaidam Basin,NW China

Taking the mixed pre-salt carbonate rocks in the upper member of Eocene Xiaganchaigou Formation(E_(3)^(2))of Yingxi area in the Qaidam Basin as an example,the lithofacies and controlling mechanisms of reservoir formation are analyzed based on a large dataset of cores,thin sections and geochemical analysis.The reservoirs in E_(3)^(2)pre-salt layers have five types of lithofacies,of them,mixed granular calcareous dolostone,massive calcareous dolostone,plaque calcareous dolostone,and laminated dolomtic limestone are of sedimentary origin,and breccia calcareous dolostone is of tectonic origin.The four types of sedimentary lithofacies are divided into two types of saline sedimentary sequence lithofacies combinations,low-energy type in the sag area and low to high-energy type in the slope and paleo-uplift zone in the depression.Affected by high-frequency supply of continental clastic material,the two types of salty sedimentary sequences are mostly incomplete subtypes of lithofacies.Lithofacies have strong impacts on pre-salt reservoirs in E_(3)^(2):(1)Lithofacies type and sedimentary sequence controlled the formation and distribution of dolomite intercrystalline pores and dissolved pores during the pene-sedimentary period.(2)The structure of laminated dolomitic limestone controlled the formation of large-scale laminated fractures and high permeability channels during the diagenetic period.(3)Granular,massive,plaque calcareous dolostones have low mud content and strong brittleness,in the late tectonic reactivation period,the distribution of the three types of lithofacies,together with their distance from the top large slip faults and secondary faults,controlled the formation and distribution of high-efficiency fracture-cave brecciaed calcareous dolostone reservoirs.The above research led to the composite lithofacies-tectonic formation model of pre-salt reservoir in E_(3)^(2)of Yingxi area.The tempo-spatial distribution of tectonic breccia calcareous dolostone reservoirs,laminated dolomitic limestone shale oil reservoirs and granular,massive calcareous dolostone dissolved-intercrystalline pore tight reservoirs in various structural belts of the studied area have been figured out.These findings gave new insights into tight-shale oil accumulation theory in mixed carbonate successions from saline lacustrine basins,aiding in high efficient exploration and development of petroleum in the studied area.

The Coarse-Grained Lacustrine Slope Apron Deposits in the Moliqing Area,Yitong Basin,Northeast China

Overlapping gravity accumulation bodies were formed on the northwestern steep slope of the Shuangyang Formation in the Moliqing fault depression of northeast China.This study analyzed in detail the spatial distribution of the lithofacies and lithofacies associations of these accumulation bodies based on more than 600 m of core sections,and summarized 12 major types of lithofacies and three types of lithofacies associations：（1） the proximal zone consists of gravelly debris flows dominated by alluvial channel conglomerates;（2） the middle zone is dominated by various gravity flow deposits and traction flow deposits;and（3） the distal zone is dominated by mudstones with intercalations of sandy debris and turbidites.Combining with the grain size cumulative probability curves analysis,we determined the transformation of debris flows to sandy debris flows and to turbidity currents in the slope zone of the basin margin,and further proposed a lacustrine slope apron model that is characterized by（1） an inconstant multiple source（line source）,（2） an alternation of gravity flow deposits and traction flow deposits dominated by periodical changes in a source flood flow system,and（3） the transformation of sandy debris flow deposits into distal turbidity current deposits.This sedimentary model may be applicable to other fault depressions for predicting reservoir distribution.

Reservoirs properties of slump-type sub-lacustrine fans and their main control factors in first member of Paleogene Shahejie Formation in Binhai area, Bohai Bay Basin, China

High-yielding oil wells were recently found in the first member of Paleogene Shahejie Formation,the Binhai area of Qikou Sag,providing an example of medium-and deep-buried high-quality reservoirs in the central part of a faulted lacustrine basin.By using data of cores,cast thin sections,scanning electron microscope and physical property tests,the sedimentary facies,physical properties and main control factors of the high-quality reservoirs were analyzed.The reservoirs are identified as deposits of slump-type sub-lacustrine fans,which are marked by muddy fragments,slump deformation structure and Bouma sequences in sandstones.They present mostly medium porosity and low permeability,and slightly medium porosity and high permeability.They have primary intergranular pores,intergranular and intragranular dissolution pores in feldspar and detritus grains,and structural microcracks as storage space.The main factors controlling the high quality reservoirs are as follows:(1)Favorable sedimentary microfacies of main and proximal distributary gravity flow channels.The microfacies with coarse sediment were dominated by transportation and deposition of sandy debris flow,and the effect of deposition on reservoir properties decreases with the increase of depth.(2)Medium texture maturity.It is shown by medium-sorted sandstones that were formed by beach bar sediment collapsing and redepositing,and was good for the formation of the primary intergranular pores.(3)High content of intermediate-acid volcanic rock detritus.The reservoir sandstone has high content of detritus of various components,especially intermediate-acid volcanic rock detritus,which is good for the formation of dissolution pores.(4)Organic acid corrosion.It was attributed to hydrocarbon maturity during mesodiagenetic A substage.(5)Early-forming and long lasting overpressure.A large-scale overpressure compartment was caused by under-compaction and hydrocarbon generation pressurization related to thick deep-lacustrine mudstone,and is responsible for the preservation of abundant primary pores.(6)Regional transtensional tectonic action.It resulted in the structural microcracks.

Paleogene and Early Neogene Lacustrine Reefs in the Western Qaidam Basin, China

Typical reefs in the Paleogene and early Neogene strata of the Qaidam Basin, Tibetan Plateau, China, reveal their internal structures and sedimentation environments and consist mainly of algal reef, stromatolite reef and thrombolite reef with distinct reef structures, fore-reef, back-reef and reef-plateau. The fore-reef is characterized by a combination of pinnacle reef, thrombolite and algal reef. The back reef is composed of stromatolite reef and algal reef. The pinnacle reefs (micro-atoll), most of which are several tens of centimeters in diameter (whereas some exceptionally big ones are over 200 cm in diameter), and several tens of centimeter to 2 m in height, are situated on the far front-edge of the reef; the pinnacle reef is also often of recumbent form with a gravel-filled circular hole in the center. The algal reef is in the form of dome and irregular beds, and filled with algal detritus, ostracodes, spirorbis fossils, ooid and terrigenous debris, and worm traces; cavities and scour marks are often developed. The algal reef is gray commonly when fresh and weathers to a brown color. The lacustrine thrombolite in the Qaidam Basin is light gray or deep gray when fresh, white-gray or brown when weathered, dense and homogeneous with abundant pores filled by oil and bitumen. Observed under the microscope, the thrombolite consists mainly of brown or brown-black clots with a little algal debris, ooid, pellet, ostracodes, spirorbis fossils and terrigenous debris, in some cases, terrigenous debris, even gravel, is abundant. Many features of the thrombolite suggest that it is formed in a high-energy envkonment. The stromatolite reefs developed on the lacustrine algal reef in the Qaidam Basin are very complex whether in shape or in internal structure. The simplest ones form laminated layers and the most complex ones have intensely branching structures. The size is also variable.

Lacustrine Basin Slope Break — A New Domain of Strata and Lithological Trap Exploration

Based on the studies of the Songliao Basin characterized by Cretaceous down-warping, of the Jurassic compressional flexural Junggar basin and of the Bohai Bay Basin characterized by Paleogene rifting, the multiple-grades slope break has developed in lacustrine basins of different origins. Their genetic types can be divided into tectonic slope break, depositional slope break and erodent slope break. The dominant agent of the slope break is tectogenesis, and the scale of slope breaks relates with the size of tectogenesis. The results of the study show that control of mutual grades slope breaks on atectonic traps mainly represent: 1) Atectonic traps develop close to mutual grades slope breaks, with beads-shaped distribution along the slope breaks. 2) In the longitudinal direction, the development of atectonic traps is characterized by the inheritance. 3) Different slope breaks and their different geographical positions can lead to different development types of atectonic traps. 4) A slope break can form different kinds of atectonic traps because of its great lateral variation. 5) The existence of mutual-grade slope breaks leads to different responses of erosion and deposition at different geographical positions in the basin. The oil source bed, reservoir and cap rock combination of atectonic traps is fine. 6) The oil-bearing condition of atectonic traps controlled by slope breaks is very favorable.

A Preliminary Study on the Soft–Sediment Deformation Structures in the Late Quaternary Lacustrine Sediments at Tashkorgan, Northeastern Pamir, China

This study identified soft-sediment deformation structures （SSDS） of seismic origin from lacustrine sediments in the late Quaternary paleo-dammed lake at Tashkorgan, northeastern Pamir. The observed deformation structures include sand dykes, liquefied diapir and convolute structures, gravity induced SSDS, and thixotropic pillar and tabular structures. We conducted a preliminary study on the morphology, formation and trigger mechanisms of pillar and tabular structures formed by liquefaction of underlying coarse sand and thixotropy of the upper silty clay. The regional tectonic setting and distribution of lacustrine strata indicate that the most probable trigger for the SSDS in lacustrine sediments was seismic activity, with an approximate earthquake magnitude of M〉6.0; the potential seismogenic fault is the southern part of the Kongur normal fault extensional system. AMS ^4C dating results indicate that the SSDS were formed by seismic events occurring between 26050±100 yrBP and 22710±80 yrBP, implying intense fault activity in this region during the late Pleistocene. This study provides new evidence for understanding tectonic activity and regional geodynamics in western China.

Key factors controlling shale oil enrichment in saline lacustrine rift basin:implications from two shale oil wells in Dongpu Depression,Bohai Bay Basin

Comparative analyses of petroleum generation potential,reservoir volume,frackability,and oil mobility were conducted on 102 shale cores from the Dongpu Depression.Results show the shale has high organic matter contents composed of oil-prone type I and type II kerogens within the oil window.Various types of pores and fractures exist in the shale,with a porosity of up to 14.9%.The shale has high brittle mineral contents,extensive fractures,and high potential for oil mobility due to high seepage capacity and overpressure.Although the petroleum generation potential of the shale at Well PS18-8 is relatively greater than that at Well PS18-1,oil content of the latter is greater due to the greater TOC.The porosity and fracture density observed in Well PS18-1 are greater and more conducive to shale oil enrichment.Although the shales in Wells PS18-1 and PS18-8 have similar brittle mineral contents,the former is more favorable for anthropogenic fracturing due to a higher preexisting fracture density.Besides,the shale at Well PS18-1 has a higher seepage capacity and overpressure and therefore a higher oil mobility.The fracture density and overpressure play key roles in shale oil enrichment.

Reservoir Characteristics of Lacustrine Shale and Marine Shale:Examples from the Songliao Basin,Bohai Bay Basin and Qiannan Depression

Lacustrine shale from the Qingshankou Formatin of Songliao basin and the Shahejie Formation of Bohai Bay basin, and marine shale from the lower Cambrian Jinmenchong Formation of Qiannan depression were analysed by using rock pyrolysis, TOC （total organic carbon）, XRD （X-ray diffraction）, SEM （scanning electron microscope）, FE-SEM （field emission scanning electron microscope）, high pressure mercury intrusion, and low pressure N2 and CO2 gas adsorption experiments, in aim to reveal their reservoir features. The results show that： （1） the width of micro-pores of all the studied samples mainly ranges from 0.45 to 0.7 nm indicated by CO2 isotherms, and the width of meso-pores is less than 10 nm, with type IV adsorption isotherms and type H2 hysteresis loop, indicative of ＂ink-bottle＂-shaped pores. Good correlations exist among pore volume, surface area and averaged pore diameter, and a good positive correlation exists between micro-pore volume and TOC content; however, there is no obvious correlation between meso-pore volume and TOC content; （2） interparticle pores, pores among the edge of mineral grains and organic matter pores were all identified in marine and lacustrine shale, among which the interparticle pores may be influence by dissolution effect. Not all bitumen develops organic matter pore, and only high to over mature bitumen present pores. Now the description methods of micrometer scale pores developed in shale are very lack. Micro- fractures developed in Jiyang depression and dissolution interparticle pores developed in Songliao Basin should be the accumulation sites for shale oil in lacustrine shale, and can be as sweet spots.

The Influence of Extractable Organic Matter on Pore Development in the Late Triassic Chang 7 Lacustrine Shales, Yanchang Formation, Ordos Basin, China

To investigate the influence of extractable organic matter （EOM） on pore evolution of lacustrine shales, Soxhlet extraction, using dichloromethane, was performed on a series of Chang 7 shale samples （Ordos Basin, China） with vitrinite reflectance of 0.64% to 1.34%. Low-pressure gas adsorption experiments were conducted on the samples before and after extraction. The pore structure parameters were calculated from the gas adsorption data. The results show complex changes to the pore volumes and surface areas after extraction. The pore development of both the initial and extracted samples is strongly controlled by total organic carbon （TOC） content. Micropores developed mainly in organic matter （OM）, while mesopores and macropores predominantly developed in fractions other than OM. The influence of EOM on micropores is stronger than on mesopores and macropores. Organic solvents with a higher boiling point should be used to explore the effect of EOM on pore structure in the future.