In the present study, the influence of natural convection on the lamellar eutectic growth is determined by a phase-field-lattice Boltzmann study for Al-Cu eutectic alloy. The mass difference resulting from concentrati...In the present study, the influence of natural convection on the lamellar eutectic growth is determined by a phase-field-lattice Boltzmann study for Al-Cu eutectic alloy. The mass difference resulting from concentration difference led to the fluid flow, and a robust parallel and adaptive mesh refinement algorithm was employed to improve the computational efficiency without any compromising accuracy. Results show that the existence of natural convection would affect the growth undercooling and thus control the interface shape by adjusting the lamellar width. In particular, by alternating the magnitude of the solute expansion coefficient, the strength of the natural convection is changed. Corresponding microstructure patterns are discussed and compared with those under no-convection conditions.展开更多
As-extruded Mg-Er-Ni alloys with different volume fractions of long-period stacking ordered(LPSO)phase and density of lamellar γ' phase were prepared,and the microstructure,mechanical,and degradation properties w...As-extruded Mg-Er-Ni alloys with different volume fractions of long-period stacking ordered(LPSO)phase and density of lamellar γ' phase were prepared,and the microstructure,mechanical,and degradation properties were investigated.Coupling the bulk LPSO phase and the lamellar γ' phase,and controlling the dynamic recrystallization processes during deformation by adjusting the volume fraction of LPSO and the density of the γ' phase,a synergistic increase in strength and degradation rate can be achieved.On the one hand,the increase in corrosion rate was related to the increased volume fraction of the bulk LPSO phase and the densities of the lamellar γ' phase,which provide more galvanic corrosion.Moreover,high densities of the lamellar γ' phase can provide more corrosion interface by inhibiting the recrystallization process to refine dynamic recrystallized(DRXed)grains during the hot extrusion.On the other hand,the ultimate tensile strength(UTS)and tensile yield strength(TYS)of the Mg-Er-Ni alloy increased from 345 and 265 MPa to 514 MPa and 358 MPa,respectively,which was mainly attributed to grain boundary and texture strengthening,bulk LPSO phase and lamellar γ' phase strengthening.Overall,Mg^(-1)4Er-4Ni alloy,which contains the highest volume fraction bulk LPSO phase and the densities of lamellar γ' phase,re-alized a synergistic enhancement of strength and degradation rate.The UTS,TYS,and degradation rate of Mg^(-1)4Er-4Ni were 514 MPa,358 MPa,and 142.5 mg cm^(-2)h^(-1)(3 wt%KCl solution at 93◦C),respectively.This research provides new insight into developing Mg alloys with high strength and degradation rates for fracturing tool materials in the application of oil and gas exploitation in harsh environments.展开更多
Glyceryl monooleate(GMO)is a polar lipid that can exist in various liquid crystalline phases in the presence of different amounts of water.It is regarded as a permeation enhancer due to its amphiphilic property.Variou...Glyceryl monooleate(GMO)is a polar lipid that can exist in various liquid crystalline phases in the presence of different amounts of water.It is regarded as a permeation enhancer due to its amphiphilic property.Various phases of GMO/solvent system containing sodium fluorescein were prepared to compare permeability using confocal laser scanning microscopy(CLSM).GMO was melted in a vial in a water bath heated to 45℃.Propylene glycol and hexanediol were homogeneously dissolved in the melted GMO.Sodium fluorescein in aqueous solution was diluted to various ratios and thoroughly mixed by an ultrasonic homogenizer.Each GMO/Solvent system with fluorescein was applied onto the epidermal side of excised pig skin and incubated overnight.CLSM was performed to observe how the GMO/solvent system in its different phases affect skin permeability.Cubic and lamellar phase formulations enhanced the fluorescein permeation through the stratum corneum.A solution system had the weakest permeability compared to the other two phases.Due to the amphiphilic nature of GMO,cubic and lamellar phases might reduce the barrier function of stratum corneum which was observed by CLSM as fluorescein accumulated in the dermis.Based on the results,the glyceryl monooleate lyotropic mixtures could be applied to enhance skin permeation in various topical and transdermal formulations.展开更多
A modified phase-field model is proposed for simulating the isothermal crystallization of polymer melts. The model consists of a second-order phase-field equation and a heat conduction equation. It obtains its model p...A modified phase-field model is proposed for simulating the isothermal crystallization of polymer melts. The model consists of a second-order phase-field equation and a heat conduction equation. It obtains its model parameters from the real material parameters and is easy to use with tolerable computational cost. Due to the use of a new free energy functional form, the model can reproduce various single crystal morphologies of polymer melts under quiescent conditions, including dendritic, lamellar branching, ring-banded, breakup of ring-banded, faceted hexagonal, and spherulitic structures. Simulation results of isotactic polystyrene crystals demonstrate that the present phase-field model has the ability to give qualitative predictions of polymer crystallization under isothermal and quiescent conditions.展开更多
Composite materials having lamellar structure are known to have a good combination of high strength and ductility. They are widely used in the fields of automobiles, civil engineering and construction, machines and ma...Composite materials having lamellar structure are known to have a good combination of high strength and ductility. They are widely used in the fields of automobiles, civil engineering and construction, machines and many other industries. An application of lamellar microstructure for developing ultra-high strength steel wires was studied and discussed. Based on the experimental results, the relationships between the strength increase and microstructure development during the cold wire drawing were studied to reveal the strengthening mechanism. As cold drawing proceeds, the wire strength extremely increases, the microstructure changes from large single crystal lamellar structure to very fine polycrystalline lamellar one which has nano-sized grains, high dislocation density and amorphous regions. From the results obtained, it is concluded that heavy cold drawing technique is an effective method for lamellar composite to get high strength wires. Furthermore, formation process of the best microstructure for producing the ultra-high strength wires was also discussed.展开更多
Based on the assumption that a representative element of apearlitic steel is an aggregate of numerous spherical pearliticcolonies with randomly distributed orientations, and that each colonyis com- posed of many paral...Based on the assumption that a representative element of apearlitic steel is an aggregate of numerous spherical pearliticcolonies with randomly distributed orientations, and that each colonyis com- posed of many parallel fine lamellas of ferrite andcementite, a description for the dual-phase pearlitic steel isobtained by making use of a microstructure-based constitutiveequation for a single dual-phase pearlitic colony and the Hill'sself-consistent scheme. The elastoplastic response of dual-phasepearlitic steel BS11 subjected to asymmetrically cyclic loading isanalyzed, and a comparison with the experimental results showssatisfacto- ry agreement. The non-proportional cyclic plasticity ofBS11 is also analyzed, in which stress develops along a semi-circlein a biaxial tension/compression and shear stress plane, as istypically experienced by the sur- face elements in rolling andsliding contact.展开更多
A Ti-45at.%Al alloy which was solution-treated at 1350℃ for 30 minutes and quenched in water is employed to explore mechanisms of α_2→γphase transformation. The ageing process of the quenched alloy has been in si...A Ti-45at.%Al alloy which was solution-treated at 1350℃ for 30 minutes and quenched in water is employed to explore mechanisms of α_2→γphase transformation. The ageing process of the quenched alloy has been in situ studied it has been found that the γ lamellae can precipitate in the α_2 matrix by two mechanisms. When The alloy is aged at 700℃, the stacking faults pre-existing in the α_2 matrix start to grow and more are generated.With the increase of ageing time and ageing temperature the density of stacking faults is increased and the γ lamellae then precipitate. This isα diffusion-controlled process. Alternatively, the γ lamellae may be formed from the α_2 matrix by 1/3(1100) shearing on the (0001) plane. The latter mechanism implies that the strain-induced transformation may occur, which is confirmed by deformation of the quenched alloy.展开更多
In this present work, a multi-phase field model was used to simulate the eutectoid transformation process, and on the basis of the nucleation model that was previously proposed by our research team, anisotropic and or...In this present work, a multi-phase field model was used to simulate the eutectoid transformation process, and on the basis of the nucleation model that was previously proposed by our research team, anisotropic and orientation relationship models were introduced to study the growth mechanism of the pearlite lamellae with anisotropy. It was found that the growth direction of the pearlite lamellae is related to its orientation and spacing. In the process of lamellar growth, deflection growth of pearlite will appear along with the adjustment of lamellar spacing, and the deflection angle is equal to the orientation difference between the austenite and the pearlite. Comparison between experimental and numerical results indicates a good consistency in pearlite morphology.展开更多
基金supported by the National Natural Science Foundation of China[grant number U1537202]the TsinghuaGeneral Motor International collaboration project[grant number 20153000354]+1 种基金the UK Royal Society through the Newton International Fellowship Schemethe National Laboratory for Information Science and Technology in Tsinghua University for access to supercomputing facilities
文摘In the present study, the influence of natural convection on the lamellar eutectic growth is determined by a phase-field-lattice Boltzmann study for Al-Cu eutectic alloy. The mass difference resulting from concentration difference led to the fluid flow, and a robust parallel and adaptive mesh refinement algorithm was employed to improve the computational efficiency without any compromising accuracy. Results show that the existence of natural convection would affect the growth undercooling and thus control the interface shape by adjusting the lamellar width. In particular, by alternating the magnitude of the solute expansion coefficient, the strength of the natural convection is changed. Corresponding microstructure patterns are discussed and compared with those under no-convection conditions.
基金support from the National Key Research and Development Program of China(No.2021YFB3701100)the Natural Science Foundation Commission of China(Grant Nos.U20A20234 and 51874062)+1 种基金the Fundamental Re-search Funds for Central Universities(No.2022CDJKYJH004C)the Science and Technology Major Project of Shanxi Province(No.20191102008).
文摘As-extruded Mg-Er-Ni alloys with different volume fractions of long-period stacking ordered(LPSO)phase and density of lamellar γ' phase were prepared,and the microstructure,mechanical,and degradation properties were investigated.Coupling the bulk LPSO phase and the lamellar γ' phase,and controlling the dynamic recrystallization processes during deformation by adjusting the volume fraction of LPSO and the density of the γ' phase,a synergistic increase in strength and degradation rate can be achieved.On the one hand,the increase in corrosion rate was related to the increased volume fraction of the bulk LPSO phase and the densities of the lamellar γ' phase,which provide more galvanic corrosion.Moreover,high densities of the lamellar γ' phase can provide more corrosion interface by inhibiting the recrystallization process to refine dynamic recrystallized(DRXed)grains during the hot extrusion.On the other hand,the ultimate tensile strength(UTS)and tensile yield strength(TYS)of the Mg-Er-Ni alloy increased from 345 and 265 MPa to 514 MPa and 358 MPa,respectively,which was mainly attributed to grain boundary and texture strengthening,bulk LPSO phase and lamellar γ' phase strengthening.Overall,Mg^(-1)4Er-4Ni alloy,which contains the highest volume fraction bulk LPSO phase and the densities of lamellar γ' phase,re-alized a synergistic enhancement of strength and degradation rate.The UTS,TYS,and degradation rate of Mg^(-1)4Er-4Ni were 514 MPa,358 MPa,and 142.5 mg cm^(-2)h^(-1)(3 wt%KCl solution at 93◦C),respectively.This research provides new insight into developing Mg alloys with high strength and degradation rates for fracturing tool materials in the application of oil and gas exploitation in harsh environments.
基金This study was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Korean Ministry of Education,Science and Technology(2012002399)a grant of the Korean Healthcare Technology R&D Project,Ministry of Health and Welfare,Republic of Korea.(Grant No.:A103017).
文摘Glyceryl monooleate(GMO)is a polar lipid that can exist in various liquid crystalline phases in the presence of different amounts of water.It is regarded as a permeation enhancer due to its amphiphilic property.Various phases of GMO/solvent system containing sodium fluorescein were prepared to compare permeability using confocal laser scanning microscopy(CLSM).GMO was melted in a vial in a water bath heated to 45℃.Propylene glycol and hexanediol were homogeneously dissolved in the melted GMO.Sodium fluorescein in aqueous solution was diluted to various ratios and thoroughly mixed by an ultrasonic homogenizer.Each GMO/Solvent system with fluorescein was applied onto the epidermal side of excised pig skin and incubated overnight.CLSM was performed to observe how the GMO/solvent system in its different phases affect skin permeability.Cubic and lamellar phase formulations enhanced the fluorescein permeation through the stratum corneum.A solution system had the weakest permeability compared to the other two phases.Due to the amphiphilic nature of GMO,cubic and lamellar phases might reduce the barrier function of stratum corneum which was observed by CLSM as fluorescein accumulated in the dermis.Based on the results,the glyceryl monooleate lyotropic mixtures could be applied to enhance skin permeation in various topical and transdermal formulations.
基金Project supported by the National Key Basic Research Program of China (973 Program) (Grant No.2012CB025903)the Foundation for Fundamental Research of Northwestern Polytechnical University,China (Grant No.JCY20130141)+1 种基金the Doctorate Foundation of Northwestern Polytechnical University,China (Grant No.cx201019)the Fund for Doctoral Students Newcomer Awards from the Ministry of Education of China
文摘A modified phase-field model is proposed for simulating the isothermal crystallization of polymer melts. The model consists of a second-order phase-field equation and a heat conduction equation. It obtains its model parameters from the real material parameters and is easy to use with tolerable computational cost. Due to the use of a new free energy functional form, the model can reproduce various single crystal morphologies of polymer melts under quiescent conditions, including dendritic, lamellar branching, ring-banded, breakup of ring-banded, faceted hexagonal, and spherulitic structures. Simulation results of isotactic polystyrene crystals demonstrate that the present phase-field model has the ability to give qualitative predictions of polymer crystallization under isothermal and quiescent conditions.
基金Project supported by the Alexander von Humboldt Foundation of Germany
文摘Composite materials having lamellar structure are known to have a good combination of high strength and ductility. They are widely used in the fields of automobiles, civil engineering and construction, machines and many other industries. An application of lamellar microstructure for developing ultra-high strength steel wires was studied and discussed. Based on the experimental results, the relationships between the strength increase and microstructure development during the cold wire drawing were studied to reveal the strengthening mechanism. As cold drawing proceeds, the wire strength extremely increases, the microstructure changes from large single crystal lamellar structure to very fine polycrystalline lamellar one which has nano-sized grains, high dislocation density and amorphous regions. From the results obtained, it is concluded that heavy cold drawing technique is an effective method for lamellar composite to get high strength wires. Furthermore, formation process of the best microstructure for producing the ultra-high strength wires was also discussed.
基金the National Natural Science Foundation of China (No.19872079)the Fund of the Ministry of Education of China.
文摘Based on the assumption that a representative element of apearlitic steel is an aggregate of numerous spherical pearliticcolonies with randomly distributed orientations, and that each colonyis com- posed of many parallel fine lamellas of ferrite andcementite, a description for the dual-phase pearlitic steel isobtained by making use of a microstructure-based constitutiveequation for a single dual-phase pearlitic colony and the Hill'sself-consistent scheme. The elastoplastic response of dual-phasepearlitic steel BS11 subjected to asymmetrically cyclic loading isanalyzed, and a comparison with the experimental results showssatisfacto- ry agreement. The non-proportional cyclic plasticity ofBS11 is also analyzed, in which stress develops along a semi-circlein a biaxial tension/compression and shear stress plane, as istypically experienced by the sur- face elements in rolling andsliding contact.
文摘A Ti-45at.%Al alloy which was solution-treated at 1350℃ for 30 minutes and quenched in water is employed to explore mechanisms of α_2→γphase transformation. The ageing process of the quenched alloy has been in situ studied it has been found that the γ lamellae can precipitate in the α_2 matrix by two mechanisms. When The alloy is aged at 700℃, the stacking faults pre-existing in the α_2 matrix start to grow and more are generated.With the increase of ageing time and ageing temperature the density of stacking faults is increased and the γ lamellae then precipitate. This isα diffusion-controlled process. Alternatively, the γ lamellae may be formed from the α_2 matrix by 1/3(1100) shearing on the (0001) plane. The latter mechanism implies that the strain-induced transformation may occur, which is confirmed by deformation of the quenched alloy.
文摘In this present work, a multi-phase field model was used to simulate the eutectoid transformation process, and on the basis of the nucleation model that was previously proposed by our research team, anisotropic and orientation relationship models were introduced to study the growth mechanism of the pearlite lamellae with anisotropy. It was found that the growth direction of the pearlite lamellae is related to its orientation and spacing. In the process of lamellar growth, deflection growth of pearlite will appear along with the adjustment of lamellar spacing, and the deflection angle is equal to the orientation difference between the austenite and the pearlite. Comparison between experimental and numerical results indicates a good consistency in pearlite morphology.
基金Key Foundational Research Plan of China(2007CB613807)Program for New Century Excellent Talents in University(NCET-07-0696)the Fund of the State Key Laboratory of Solidification Processing in NWPU(35-TP-2009)
