Study of hybrid nanofluid flow in a stationary cone-disk system with temperature-dependent fluid properties

Cone-disk systems find frequent use such as conical diffusers,medical devices,various rheometric,and viscosimetry applications.In this study,we investigate the three-dimensional flow of a water-based Ag-Mg O hybrid nanofluid in a static cone-disk system while considering temperature-dependent fluid properties.How the variable fluid properties affect the dynamics and heat transfer features is studied by Reynolds's linearized model for variable viscosity and Chiam's model for variable thermal conductivity.The single-phase nanofluid model is utilized to describe convective heat transfer in hybrid nanofluids,incorporating the experimental data.This model is developed as a coupled system of convective-diffusion equations,encompassing the conservation of momentum and the conservation of thermal energy,in conjunction with an incompressibility condition.A self-similar model is developed by the Lie-group scaling transformations,and the subsequent self-similar equations are then solved numerically.The influence of variable fluid parameters on both swirling and non-swirling flow cases is analyzed.Additionally,the Nusselt number for the disk surface is calculated.It is found that an increase in the temperature-dependent viscosity parameter enhances heat transfer characteristics in the static cone-disk system,while the thermal conductivity parameter has the opposite effect.

Thin polymer electrolyte with MXene functional layer for uniform Li^(+) deposition in all-solid-state lithium battery

Solid polymer electrolyte(SPE) shows great potential for all-solid-state batteries because of the inherent safety and flexibility;however, the unfavourable Li+deposition and large thickness hamper its development and application. Herein, a laminar MXene functional layer-thin SPE layer-cathode integration(MXene-PEO-LFP) is designed and fabricated. The MXene functional layer formed by stacking rigid MXene nanosheets imparts higher compressive strength relative to PEO electrolyte layer. And the abundant negatively-charged groups on MXene functional layer effectively repel anions and attract cations to adjust the charge distribution behavior at electrolyte–anode interface. Furthermore,the functional layer with rich lithiophilic groups and outstanding electronic conductivity results in low Li nucleation overpotential and nucleation energy barrier. In consequence, the cell assembled with MXene-PEO-LFP, where the PEO electrolyte layer is only 12 μm, much thinner than most solid electrolytes, exhibits uniform, dendrite-free Li+deposition and excellent cycling stability. High capacity(142.8 mAh g-1), stable operation of 140 cycles(capacity decay per cycle, 0.065%), and low polarization potential(0.5 C) are obtained in this Li|MXene-PEO-LFP cell,which is superior to most PEO-based electrolytes under identical condition. This integrated design may provide a strategy for the large-scale application of thin polymer electrolytes in all-solid-state battery.

Uncertainty analysis of turbulence model in capturing flows involving laminarization and retransition

Flows experiencing laminarization and retransition are universal and crucial in many engineering applications.The objective of this study is to conduct an uncertainty quantification and sensitivity analysis of turbulence model closure coefficients in capturing laminarization and retransition for a rapidly contracting channel flow.Specifically,two commonly used turbulence models are considered:the Spalart-Allmaras(SA)one-equation model and the Menter Shear Stress Transport(SST)two-equation model.Thereby,a series of steady Reynolds Averaged Navier-Stokes(RANS)predictions of aero-engine intake acceleration scenarios are carried out with the purposely designed turbulence model closure coefficients.As a result,both SA and SST models fail to capture the retransition phenomenon though they achieve pretty good performance in laminarization.Using the non-intrusive polynomial chaos method,solution uncertainties in velocity,pressure,and surface friction are quantified and analyzed,which reveals that the SST model possesses much great uncertainty in the non-laminar regime,especially for the logarithmic law prediction.Besides,a sensitivity analysis is performed to identify the critical contributors to the solution uncertainty,and then the correlations between the closure coefficients and the deviations of the outputs of interest are obtained via the linear regression method.The results indicate that the diffusion-related constants are the dominant uncertainty contributors for both SA and SST models.Furthermore,the remarkably strong correlation between the critical closure coefficients and the outputs might be a good guide to recalibrate and even optimize the commonly used turbulence models.

CFD simulation of hydrodynamics and mixing performance in dual shaft eccentric mixers

This work aims to systematically study hydrodynamics and mixing characteristics of non-Newtonian fluid(carboxyl methyl cellulose,CMC)in dual shaft eccentric mixer.Fluid rheology was described by the power law rheological model.Computational fluid dynamics was employed to simulate the velocity field and shear rate inside the stirred tank.The influence mechanism of the rotational modes,height difference between impellers,impeller eccentricities,and impeller types on the flow field have been well investigated.We studied the performance of different dual-shaft eccentric mixers at the constant power input with its fluid velocity profiles,average shear strain rate,mixing time and mixing energy.The counter-rotation mode shows better mixing performance than co-rotation mode,and greater eccentricity can shorten mixing time on the basis of same stirred condition.To intensify the hydrodynamic interaction between impellers and enhance the overall mixing performance of the dual shaft eccentric mixers,it is critical to have a reasonable combination of impellers and an appropriate spatial position of impellers.

Effect of CO_(2) dilution on laminar burning velocities,combustion characteristics and NO_(x) emissions of CH_(4)/air mixtures

The laminar combustion characteristics of CH_(4)/air premixed flames with CO_(2) addition are systemically studied.Experimental measurements and numerical simulations of the laminar burning velocity(LBV)are performed in CH_(4)/CO_(2)/Air flames with various CO_(2) doping ratio under equivalence ratios of 1.0–1.4.GRI 3.0 mech and Aramco mech are employed for predicting LBV,adiabatic flame temperature(AFT),important intermediate radicals(CH_(3),H,OH,O)and NO_(x) emissions(NO,NO_(2),N2O),as well as the sensitivity analysis is also conducted.The detail analysis of experiment and simulation reveals that as the CO_(2) addition increases from 0%to 40%,the LBVs and AFTs decrease monotonously.Under the same CO_(2) doping ratio,the LBVs and AFTs increase first and then decrease with the increase of equivalence ratio,and the maximum of LBV is reached at equivalence ratio of 1.05.The mole fraction tendency of important intermediates and NO_(x) with equivalence ratio and CO_(2) doping ratio are similar to the LBVs and AFTs.Reaction H+O_(2)⇔O+OH is found to be responsible for the promotion of the generation of important intermediates and NO_(x) under the equivalence ratios and CO_(2) addition through sensitivity analysis.The sensitivity coefficients of elementary reactions that the increasing of CO_(2) doping ratio promotes or inhibits formation of intermediate radicals and NO_(x) decreases.

从亚临界到临界雷诺数圆柱绕流和分离泡的大涡模拟

A large eddy simulation of wall-adapting local eddy-viscosity model(LES-WALE)is used to simulate the threedimensional flow around a circular cylinder with a diameter of 0.25 m from sub-critical to super-critical Reynolds numbers at 1×10^(5),2.5×10^(5),and 7.2×10^(5),respectively.The present results such as drag crisis,surface pressure distribution,and Strouhal number are in good agreement with the classical experimental data.When entering the critical region,a small plateau was found on the pressure distribution curves,corresponding to the appearance of laminar separation bubbles,and the separation point is delayed and the recirculation bubbles become narrowed and shortened.The tangential velocity of the cylinder surface changes from positive to negative at the separation point.The instantaneous vorticity and timeaveraging separation bubbles embody an unstable feature.Within the separation bubble,the pressure varies dramatically with time,but not with position.The surface pressure fluctuates greatly after the laminar separation bubble appears,and it is gradually stabilized until the basic pressure is reached.The process of laminar separation,transition from laminar flow to turbulent flow and turbulent reattachment is also shown.The three-dimensional Q criterion of vortex structure and the two-dimensional spanwise vorticity reveal the phenomenon that the wake structure narrows with the increase of the Reynolds number.

Pipes with Trapezoidal Cut Twisted Tape Inserts in the Laminar Flow Regime:Nusselt Number and Friction Coefficient Analysis

The thermal behavior of pipes with a twisted tape inside(used to enhance heat transfer through the tube wall)is studied in the laminar flow regime.Oil is used as the work fluid with the corresponding Reynolds Number spanning the interval 200–2000.It is found that in such conditions the‘Nusselt Number’(Nu)gradually increases with reducing the tape twist ratio,whereas the friction factor is detrimentally affected by the presence of the tape(as witnessed by the comparison with the companion case where a plain tube is considered).In particular,it is shown that the heat transfer efficiency can be improved by nearly 69%if tape inserts with a relatively low twist ratio are used.On the basis of these findings,it is concluded that loose fit tape inserts are superior to tight fit tapes in terms of heat transfer and ease of replacement.

在斜向非定常流动中由层流向湍流转变对模型尺度螺旋桨性能和压力脉动的影响

In this paper,after the successful applications to open water propeller performance estimations,the influence of transition sensitive and modified mass transfer models tuned to account for the laminar flow in the prediction of the cavitation inception of marine propulsors is investigated from the point of view of the unsteady functioning and induced pressure pulses.The VP1304(also known as PPTC)test case,for which dedicated data were collected during several workshops,is considered first.After preliminary analyses using RANS,also Detached Eddy Simulations(DES)are included to better account for the vortex dynamics and its influence on pressure pulses.Similarly to what observed in uniform inflow,results show a better agreement with the available measurements of propeller performances and confirm the reliability of the proposed approaches for unsteady,non-cavitating,model scale propeller predictions.The overall cavitation pattern is improved too by the application of the transition sensitive correction to the mass transfer model,but the complex dynamics of bubble cavitation observed in experiments prevents quantitatively better predictions in terms of thrust/torque breakdown and induced pressure pulses levels regardless the use of RANS or DES methods.

Laminar Composite Solid Electrolyte with Poly(Ethylene Oxide)-Threaded Metal-Organic Framework Nanosheets for High-Performance All-Solid-State Lithium Battery

Developing laminar composite solid electrolyte with ultrathin thickness and continuous conduction channels in vertical direction holds great promise for all-solid-state lithium batteries.Herein,a thin,laminar solid electrolyte is synthesized by filtrating–NH 2 functionalized metal-organic framework nanosheets and then being threaded with poly(ethylene oxide)chains induced by the hydrogen-bonding interaction from–NH_(2) groups.It is demonstrated that the threaded poly(ethylene oxide)chains lock the adjacent metal-organic framework nanosheets,giving highly enhanced structural stability(Young’s modulus,1.3 GPa)to 7.5-μm-thick laminar composite solid electrolyte.Importantly,these poly(ethylene oxide)chains with stretching structure serve as continuous conduction pathways along the chains in pores.It makes the non-conduction laminar metal-organic framework electrolyte highly conductive:3.97×10^(−5) S cm^(−1) at 25℃,which is even over 25 times higher than that of pure poly(ethylene oxide)electrolyte.The assembled lithium cell,thus,acquires superior cycling stability,initial discharge capacity(148 mAh g^(−1) at 0.5 C and 60℃),and retention(94% after 150 cycles).Besides,the pore size of nanosheet is tailored(24.5–40.9˚A)to evaluate the mechanisms of chain conformation and ion transport in confined space.It shows that the confined pore only with proper size could facilitate the stretching of poly(ethylene oxide)chains,and meanwhile inhibit their disorder degree.Specifically,the pore size of 33.8˚A shows optimized confinement effect with trans-poly(ethylene oxide)and cis-poly(ethylene oxide)conformation,which offers great significance in ion conduction.Our design of poly(ethylene oxide)-threaded architecture provides a platform and paves a way to the rational design of next-generation high-performance porous electrolytes.

Rod-pinch二极管理论及数值模拟

介绍了Rod-pinch二极管的基本结构和工作原理,采用Laminar模型分析了Rod-pinch二极管中的粒子运动过程及其阻抗特性。考虑背景空间离子电荷的影响,用1维Laminar方程分析Rod-pinch二极管中电子的自箍缩过程,并且利用Magic程序对其中的粒子运动进行数值模拟,求解二极管中的电压和电流,最终得出二极管的阻抗特性,在较低电压下,负极性RPD的性能明显不如正极性RPD。根据临界电流经验公式,初步验证Laminar理论模型的可行性。

用于高压无气喷涂原子灰的扇形喷嘴内部流场的数值仿真

利用计算流体软件ANSYS Fluent构建固瑞克645扇形喷嘴三维有限元模型,然后用Laminar层流模型对高压无气喷涂原子灰扇形喷嘴内的压力、速度流场以及入口压力对压力、速度流场和出口流量的影响进行数值模拟.结果表明:压力和速度场云图呈层状分布、梯度变化;在喷嘴的锥形前段和圆柱部分,压力和速度随距离的变化平缓;在圆锥向圆柱过渡段和出口段压力和速度变化剧烈;总体来看,入口压力越大,出口速度和流量越大;在出口段,入口压力对压力流场和速度流场影响尤为明显.根据结果综合分析,入口压力在15~20 MPa比较合理.

Experimental Research and Mathematical Model of Drag Torque in Single-plate Wet Clutch

Reduction of drag torque is one of important potentials to improve transmission efficiency.Existing mathematical model of drag torque was not accurate to predict the decrease after oil film shrinking because of the difficulty in modeling the flow pattern between two plates.Flow pattern was considered as laminar flow and full oil film in the gap between two plates in traditional model.Subsequent equivalent circumferential degree model presented an improvement in oil film shrinking due to centrifugal force,but was also based on full oil film in the gap,which resulted difference between model prediction and experimental data.The objective of this paper is to develop an accurate mathematical model for the above problem by using experimental verification.An experimental apparatus was set up to test drag torque of disengaged wet clutch consisting of single friction and separate plate.A high speed camera was used to record the flow pattern through transparent quartz disk plate.The visualization of flow pattern in the clearance was investigated to evaluate the characteristics of oil film shrinking.Visual test results reveal that the oil film begins to shrink from outer radius to inner radius at the stationary plate and only flows along the rotating plate after shrinking.Meanwhile,drag torque decreases sharply due to little contact area between the stationary plate and the oil.A three-dimensional Navier-Stokes （N-S） equation based on laminar flow is presented to model the drag torque.Pressure distributions in radial and circumferential directions as well as speed distributions are deduced.The model analysis reveals that the acceleration of flow in radial direction caused by centrifugal force is the key reason for the shrinking at the constant feeding flow rate.An approach to descript flow pattern was presented on the basis of visual observation.The drag torque predicted by the model agrees well with test data for non-grooved wet clutch.The proposed model enhances the precision for predicting drag torque,and lays down a framework on which some subsequent models are developed.

Opti mization and Model of Laminar Cooling Control Systemfor Hot Strip Mills

The structure of laminar cooling control system for hot rolling was introduced and the control mode, cooling strategy, segment tracking and model recalculation were analyzed. The parameters of air/water cooling models were optimized by regressing the data gathering in situ, and satisfactory effect was obtained. The coiling temperature can be controlled within ±15℃.

Self-Learning and Its Application to Laminar Cooling Model of Hot Rolled Strip

The mathematical model for online controlling hot rolled steel cooling on run-out table （ROT for abbreviation） was analyzed, and water cooling is found to be the main cooling mode for hot rolled steel. The calculation of the drop in strip temperature by both water cooling and air cooling is summed up to obtain the change of heat transfer coefficient. It is found that the learning coefficient of heat transfer coefficient is the kernel coefficient of coiler temperature control （CTC） model tuning. To decrease the deviation between the calculated steel temperature and the measured one at coiler entrance, a laminar cooling control self-learning strategy is used. Using the data acquired in the field, the results of the self-learning model used in the field were analyzed. The analyzed results show that the self-learning function is effective.

Simulation of Rolling Billet in Oval Pass by Explicit Dynamics Elastic-Plastic FEM

Considering the strip speed during controlled laminar cooling on Baosteel 1580 hot strip mill in China, the influence of strip speed fluctuation on coiling temperature control for the tail and “neck” of the strip was analyzed. The optimization strategies were put forward and proved effective in operation.

Improvement of Prediction Method for Strip Coiling Temperature

In order to improve the control precision of strip coiling temperature for hot strip mill,the BP neural network was combined with mathematical model to calculate convective heat-transfer coefficient of laminar flow cooling.The off-line calculated results indicate that the standard deviation of coiling temperature prediction is reduced by 22.84 % with the convective heat-transfer coefficient calculated by BP neural network.The prospects of this method for online application are bright.This method is more helpful to increasing the control precision of coiling temperature for hot strip steel.

Physics-informed deep learning for incompressible laminar flows

Physics-informed deep learning has drawn tremendous interest in recent years to solve computational physics problems,whose basic concept is to embed physical laws to constrain/inform neural networks,with the need of less data for training a reliable model.This can be achieved by incorporating the residual of physics equations into the loss function.Through minimizing the loss function,the network could approximate the solution.In this paper,we propose a mixed-variable scheme of physics-informed neural network(PINN)for fluid dynamics and apply it to simulate steady and transient laminar flows at low Reynolds numbers.A parametric study indicates that the mixed-variable scheme can improve the PINN trainability and the solution accuracy.The predicted velocity and pressure fields by the proposed PINN approach are also compared with the reference numerical solutions.Simulation results demonstrate great potential of the proposed PINN for fluid flow simulation with a high accuracy.

NUMERICAL SOLUTION OF VISCOUS FLOW PAST A SOLID SPHERE WITH THE CONTROL VOLUME FORMULATION

The control volume formulation with the QUICK finite difference scheme is used to solveincompressible liquid flow past a solid sphere in terms of stream function and vorticity.Several tech-nical points are addressed on improving the accuracy and efficiency of numerical simulation of similarproblems of fluid flow.In particular,the importance of suitable specification of the distortion func-tion to enforcing the far field boundarv conditions is emphasized.

Three-dimensional Expansion:In Suspension Culture of SD Rat's Osteoblasts in a Rotating Wall Vessel Bioreactor

Objective To study large-scale expansion of SD （Sprague-Dawley） rat＇s osteoblasts in suspension culture in a rotating wall vessel bioreactor （RWVB）. Methods The bioreactor rotation speeds were adjusted in the range of 0 to 20 rpm, which could provide low shear on the rnicrocarriers around 1 dyn/cm^2. The cells were isolated via sequential digestions of neonatal （less than 3 days old） SD rat calvaria. After the primary culture and several passages, the cells were seeded onto the microcarriers and cultivated in T-flask, spinner flask and RWVB respectively. During the culture period, the cells were counted and observed under the inverted microscope for morphology every 12 h. After 7 days, the cells were evaluated with scanning electron microscope （SEM） for histological examination of the aggregates. Also, the hematoxylin-eosin （HE） staining and alkaline phosphatase （ALP） staining were performed. Moreover, von-Kossa staining and Alizarin Red S staining were carded out for mineralized nodule formation. Results The results showed that in RWVB, the cells could be expanded by more than ten times and they presented better morphology and vitality and stronger ability to form bones. Conclusions The developed RWVB can provide the culture environment with a relatively low shear force and necessary three-dimensional （3D） interactions among cells and is suitable for osteopath expansion in vitro.