The backfilling mining technology is a type of high-efficiency coal mining technology that is used to address the environmental issues caused by the caving mining technology.In this paper,the mechanical model of symme...The backfilling mining technology is a type of high-efficiency coal mining technology that is used to address the environmental issues caused by the caving mining technology.In this paper,the mechanical model of symmetrical laminated plate representing the overburden movement caused by the backfilling mining technology is established,and the governing differential equation of the motion of the overburden is derived.The boundary conditions of the mechanical model are put forward,and the analytical solution of the overburden movement and surface subsidence is obtained.The numerical model of the overburden movement and surface subsidence,under mining with backfilling,is established by means of the FLAC3D numerical software,which aims to systematically study the influence of backfilling compactness,mining thickness,and mining depth on the overburden movement and surface subsidence in backfilling mining.When the compactnessηis less than 70%,the overburden movement and surface subsidence is greater,while whenηis greater than 70%,the overburden movement and surface subsidence is reduced significantly.On this basis,the control mechanism of surface subsidence and overburden movement in backfilling mining is obtained.The suitable backfilling compactness is the key to controlling surface subsidence and overburden movement in backfilling mining.展开更多
The prediction of the behavior of reinforced concrete beams under bending is essential for the perfect design of these elements.Usually,the classical models do not incorporate the physical nonlinear behavior of concre...The prediction of the behavior of reinforced concrete beams under bending is essential for the perfect design of these elements.Usually,the classical models do not incorporate the physical nonlinear behavior of concrete under tension and compression,which can underestimate the deformations in the structural element under short and long-term loads.In the present work,a variational formulation based on the Finite Element Method is presented to predict the flexural behavior of reinforced concrete beams.The physical nonlinearity due cracking of concrete is considered by utilization of damage concept in the definition of constitutive models,and the lamination theory it is used in discretization of section cross of beams.In the layered approach,the reinforced concrete element is formulated as a laminated composite that consists of thin layers,of concrete or steel that has been modeled as elastic-perfectly plastic material.The comparison of numerical load-displacement results with experimental results found in the literature demonstrates a good approximation of the model and validates the application of the damage model in the Classical Laminate Theory to predict mechanical failure of reinforced concrete beam.The results obtained by the numerical model indicated a variation in the stress-strain behavior of each beam,while for under-reinforced beams,the compressive stresses did not reach the peak stress but the stress-strain behavior was observed in the nonlinear regime at failure,for the other beams,the concrete had reached its ultimate strain,and the beam’s neutral axis was close to the centroid of the cross-section.展开更多
The conventional approach to analysis the buckling of rectangular laminates containing an embedded delamination subjected to the in-plane loading is to simplify the laminate as a beam-plate from which the predicted bu...The conventional approach to analysis the buckling of rectangular laminates containing an embedded delamination subjected to the in-plane loading is to simplify the laminate as a beam-plate from which the predicted buckling load decreases as the length of the laminate increases. Two-dimensional analyses are employed in this paper by extending the one-dimensional model to take into consideration of the influence of the delamination width on the buckling performance of the laminates. The laminate is simply supported containing a through width delamination. A new parameterβ defined as the ratio of delamination length to delamination width is introduced with an emphasis on the influence of the delamination size. It is found that (i) when the ratio β is greater than one snap-through buckling prevails, the buckling load is determined by the delamination size and depth only; (ii) as the ratio β continues to increase, the buckling load will approach to a constant value. Solutions are verified with the well established results and are found in good agreement with the latter.展开更多
基金supported by the National Natural Science Foundation of China(51504081,51704095,51374201)the National Key Research and Development Program of China(2017YFC0805202)+3 种基金the Scientific Research Key Project Fund of Education Department of Henan Province(18A440012,14A440001)the Research Fund of Henan Key Laboratory for Green and Efficient Mining and Comprehensive Utilization of Mineral Resources(S201619)the Research Fund of the State Key Laboratory of Coal Resources and Safe Mining(13KF02)the Ph.D.Programs Foundation of Henan Polytechnic University(B2014-50,B2016-67).
文摘The backfilling mining technology is a type of high-efficiency coal mining technology that is used to address the environmental issues caused by the caving mining technology.In this paper,the mechanical model of symmetrical laminated plate representing the overburden movement caused by the backfilling mining technology is established,and the governing differential equation of the motion of the overburden is derived.The boundary conditions of the mechanical model are put forward,and the analytical solution of the overburden movement and surface subsidence is obtained.The numerical model of the overburden movement and surface subsidence,under mining with backfilling,is established by means of the FLAC3D numerical software,which aims to systematically study the influence of backfilling compactness,mining thickness,and mining depth on the overburden movement and surface subsidence in backfilling mining.When the compactnessηis less than 70%,the overburden movement and surface subsidence is greater,while whenηis greater than 70%,the overburden movement and surface subsidence is reduced significantly.On this basis,the control mechanism of surface subsidence and overburden movement in backfilling mining is obtained.The suitable backfilling compactness is the key to controlling surface subsidence and overburden movement in backfilling mining.
基金funded by CNPq,grant numbers 313693/2019-6 and 408135/2021-2State University of Feira de Santana,grant numbers 034/2021 and 064/2021.
文摘The prediction of the behavior of reinforced concrete beams under bending is essential for the perfect design of these elements.Usually,the classical models do not incorporate the physical nonlinear behavior of concrete under tension and compression,which can underestimate the deformations in the structural element under short and long-term loads.In the present work,a variational formulation based on the Finite Element Method is presented to predict the flexural behavior of reinforced concrete beams.The physical nonlinearity due cracking of concrete is considered by utilization of damage concept in the definition of constitutive models,and the lamination theory it is used in discretization of section cross of beams.In the layered approach,the reinforced concrete element is formulated as a laminated composite that consists of thin layers,of concrete or steel that has been modeled as elastic-perfectly plastic material.The comparison of numerical load-displacement results with experimental results found in the literature demonstrates a good approximation of the model and validates the application of the damage model in the Classical Laminate Theory to predict mechanical failure of reinforced concrete beam.The results obtained by the numerical model indicated a variation in the stress-strain behavior of each beam,while for under-reinforced beams,the compressive stresses did not reach the peak stress but the stress-strain behavior was observed in the nonlinear regime at failure,for the other beams,the concrete had reached its ultimate strain,and the beam’s neutral axis was close to the centroid of the cross-section.
基金supported by the National Natural Science Foundation of China(Nos.11172113,11032005,and 11072037)
文摘The conventional approach to analysis the buckling of rectangular laminates containing an embedded delamination subjected to the in-plane loading is to simplify the laminate as a beam-plate from which the predicted buckling load decreases as the length of the laminate increases. Two-dimensional analyses are employed in this paper by extending the one-dimensional model to take into consideration of the influence of the delamination width on the buckling performance of the laminates. The laminate is simply supported containing a through width delamination. A new parameterβ defined as the ratio of delamination length to delamination width is introduced with an emphasis on the influence of the delamination size. It is found that (i) when the ratio β is greater than one snap-through buckling prevails, the buckling load is determined by the delamination size and depth only; (ii) as the ratio β continues to increase, the buckling load will approach to a constant value. Solutions are verified with the well established results and are found in good agreement with the latter.