Gas source of the Middle Jurassic Shaximiao Formation in the Zhongjiang large gas field of Western Sichuan Depression:Constraints from geochemical characteristics of light hydrocarbons

The Zhongjiang gas field is a typical large gas field in terrigenous strata of the Western Sichuan Depression.It remains debatable which member of the Upper Triassic Xujiahe Formation served as the source rocks and how significant the member contributed to the gas accumulations in the Zhongjiang gas field.In this study,we analyzed the essential characteristics of the Lower Jurassic source rocks and the geochemical features of light hydrocarbons in natural gas from the 2nd(T_(3)χ^(2))and 4th members(T_(3)χ^(4))of the Upper Triassic Xujiahe Formation(T_(3)χ),as well as the Middle Jurassic Shaximiao(J_(2)s)and Qianfoya(J_(2)q)formations.Based on this,we explored the sources of the natural gas in the Zhongjiang gas field and determined the natural gas migration patterns and their effects on the properties of light hydrocarbons in the natural gas.The results indicate that the Lower Jurassic lacustrine source rocks of the Zhongjiang gas field contain humic organic matter,with vitrinite reflectance(R_(0))values ranging from 0.86%to 0.98%.Samples meeting the criterion for effective source rocks[total organic carbon(TOC)content≥0.75%]exhibited an average TOC content of merely 1.02%,suggesting significantly lower hydrocarbon generation potential than source rocks in the underlying T3x,which show higher thermal maturity and TOC contents.For natural gas samples from T_(3)χ^(2),T_(3)χ^(4),J_(2)s,and J_(2)q reservoirs,their C_(5-7)iso-alkane content was significantly higher than their n-alkane content,and their methylcyclohexane(MCH)index ranged from 59.0%to 77.3%,indicating the predominance of methylcyclohexane in C_(7)light hydrocarbons.As indicated by the origin identification and gas-source correlation based on the geochemical features of light hydrocarbons,the natural gas in the Zhongjiang gas field is typical coal-derived gas.The gas from the primary pay zone of the Shaximiao Formation,with significantly high K_(1),(P_(2)+N_(2))/C_(7),and P_(3)/C_(7)values,predominantly originated from the 5th member of the T3x and migrated in the free phase,with a small amount possibly sourced from the Lower Jurassic source rocks.The dissolution and adsorption during gas migration led to a decrease in the aromatic content in C_(6-7)light hydrocarbons and an increase in the isoheptane values.Therefore,their effects must be considered when determining the gas origin and thermal maturity based on the aromatic content in C_(6-7) light hydrocarbons and iso-heptane values.

Metamerism Appreciation of Jadeite-Jade Green under the Standard Light Sources D_(65),A and CWF

We tested 288 pieces of the polished cabochon jadeite-jade with high quality green and smooth surfaces using the colorimeter Color i5 based on the CIE 1976 L＊a＊b＊ uniform color space. The color changes after alternating three CIE standard light sources D65, A and CWF were compared, and the degree of metamerism was evaluated. The results show that the CIE standard light sources D65, A and CWF increase the chroma of green and turn bluish green into vivid green, which are similar or to nearly colorless and transparent glass-like samples with fine textures. When the three light sources were individually alternated, the lightness of the jadeite-jades showed little change, but the tone changed significantly. Metamerism occurred only in 3 pairs among the 16 samples that were selected by cluster analysis for quality, and the metamerism colors were highly consistent of L＊D65∈（43.47, 46.75）, C＊D65∈（65.20, 68.80） and ho＊D65∈（138.10, 140.23）. We can conclude that the jadeite-jade green gradually turns to blue when the color temperature of the light source increases. But when considering both the light sources and the samples, D65 is more suitable to be the light source of jadeite-jade green when compared with the light sources CWF and A. Compared with the CIE standard green and high chroma green, high-quality jadeite-jade green has a slight yellow tone, low lightness and high chroma. The special metamerism index decreased to 1 when the light source alternated among D65, A and CWF. Therefore, the color of jadeite-jade green might be slightly influenced by alternating of the light sources.

Radiation of lamp and optimized experiment using artificial light in the Arctic Ocean

A winter optical experiment by an artificial lamp was conducted in the Amundsen Bay of Arctic Ocean from November of 2007 to January of 2008. The radiation field emitted from an artificial lamp was measured and is introduced in this paper, and the optimized experiment project is discussed. It is demonstrated that the minimum size allowed of the lamp is determined by both the field of view （ FOV ） of optical instrument and the measuring distance from the lamp. Some problems that might influence on the experiment result often occur for a simple fluorescent lamp, such as instability, spatial nonuniformity, light divergence, effect of lamp temperature, etc. By the analysis of the light radiation, three kind of measures are proposed to control the quality of the experiment, i.e. keeping consistency of lamp size with FOV of instrument, calibrating in situ downwind, and conducting measurement in effective range. Among them, the downwind calibration is the key step to overcome most problems arose by the lamp. The experiment indicated that the reliable results can be obtained only when the optical measurement is coordinated with the radiation field of artificial lamp. The measured radiation property of the lamp was used to advise the field experiment to minimize measuring error. As the experiment by artificial lamp was the first attempt in the Arctic Ocean, the experience given by this paper is a valuable reference to the correlative studies.

Ghost imaging based on the control of light source bandwidth

A scheme to improve the quality in ghost imaging(GI)by controlling the bandwidth of light source(BCGI)is proposed.The theoretical and numerical results show that the reconstruction result with high quality can be obtained by adjusting the bandwidth range of the light source appropriately,and the selection criterion of the bandwidth is analyzed by the power distribution of the imaging target.A proof-of-principle experiment is implemented to verify the theoretical and numerical results.In addition,the BCGI also presents better anti-noise performance when compared with some popular GI methods.

Source and commingling features of light oils from the Chepaizi uplift in the Junggar Basin, Northwest China

Geochemical composition characteristics of light oils from the Tertiary in the west of the Chepaizi uplift in the Junggar basin, northwest China, are distinct from those of biodegraded oils derived from the Permian in the study area and crude oils from some adjacent oil fields such as the Chepaizi and Xiaoguai oilfields. Oil source corre-lation shows that light oils in the study area have similar n-alkane and isoprenoid distribution patterns and carbon isotope compositions with the coal-derived oils from the Jurassic, and display obvious discrepancy on biomarker composition characteristics with the Cretaceous source rock extracts, inferring that they are probably the mixed oils from the Jurassic coal measures and Cretaceous source rocks. In this study, combined with the geochemical data of coal-derived oils from the Jurassic and Cretaceous source rocks or crude oils from the Cretaceous, the source and commingling features of the Tertiary crude oils of Well Pai 2 and Well Pai 8 were investigated. The proportion of the two sources in the mixed crude oils was estimated, and the hydrocarbon accumulation pattern of reservoirs in the study area was established.

Transcriptome analysis reveals effects of red and blue lightemitting diodes(LEDs)on the growth,chlorophyll fluorescence and endogenous plant hormones of potato(Solanum tuberosum L.)plantlets cultured in vitro

Red and blue light illumination has been reported to significantly affect plantlet growth.Potato is an important food and feed crop in the world and potato plantlet cultured in vitro plays an important role in potato production.However,few studies have documented the effects of red and blue light on the growth of potato plantlets revealed at the transcriptome level.The objective of this study was to determine the growth and physiological responses of potato plantlets cultured in vitro under monochromatic red(RR),monochromatic blue(BB)as well as combined red and blue(RB)LEDs using the RNA-Seq technique.In total,3150 and 814 differentially expressed genes(DEGs)were detected in potato plantlets under RR and BB,respectively,compared to RB(used as control).Compared to the control,the DEGs enriched in"photosynthesis"and"photosynthesis-antenna proteins"metabolic pathways were up-regulated and down-regulated by BB and RR,respectively,which might be responsible for the increases and decreases of maximum quantum yield(F_(v)/F_(m)),photochemical quantum yield(φ_(PSII)),photochemical quenching(q_(P))and electron transfer rate(ETR)in BB and RR,respectively.Potato plantlets exhibited dwarfed stems and extended leaves under BB,whereas elongated stems and small leaves were induced under RR.These dramatically altered plantlet phenotypes were associated with variable levels of endogenous plant hormones gibberellin(GAs),indoleacetic acid(IAA)and cytokinins(CKs),as assessed in stems and leaves of potato plantlets.In addition,monochromatic red and blue LEDs trigged the opposite expression profiles of DEGs identified in the"plant hormone signal transduction"metabolic pathway,which were closely related to the endogenous plant hormone levels in potato plantlets.Our results provide insights into the responses of potato plantlets cultured in vitro to red and blue LEDs at the transcriptomic level and may contribute to improvements in the micro-propagation of potato plantlets cultured in vitro from the light spectrum aspect.

Optical Design and Stray Light Analysis of the Space Infrared Optical System

This article describes a novel configuration design for a re-imaging off-axis catadioptric space infrared optical system,and in order to satisfy the signal noise ratio requirements of the system,the stray light of the system is necessary to analyze and restrain. The optical system with a focal length of 1 200 mm,an entrance pupil diameter of 600 mm,an F-number of 2,a field of view of 3°× 0. 15°,a working wave band of 8 μm-10 μm,and the image quality of the optical system almost approach to diffraction limits in all field of view.Then the mathematical models of stray light are built,and the suppressive structure is established to eliminate the effect of stray light. Finally,TraceP ro is used to analyze and simulate stray light with and without the suppressive structure,and also get the results of the PST curves. The results indicate that appropriate optical system and suppressive structure can highly reduce the stray light of the space infrared optical system.

Tuning the velocity and flux of a low-velocity intense source of cold atomic beam

We investigate experimentally and numerically the quantitative dependence of characteristics of a low-velocity intensity source（LVIS） of atomic beam on light parameters, especially the polarization of cooling laser along the atomic beam axis（pushing beam）. By changing the polarization of the pushing beam, the longitudinal mean velocity of a rubidium atomic beam can be tuned continuously from 10 to 20 m/s and the flux can range from 3 × 10^-8 to 1 × 10^-9 atoms/s, corresponding to the maximum sensitivity of the velocity with respect to the polarization angle of 20（m/s）/rad and the mean sensitivity of flux of 1.2 × 10^-9（atoms/s）/rad. The mechanism is explained with a Monte-Carlo based numerical simulation method, which shows a qualitative agreement with the experimental result. This is also a demonstration of a method enabling the fast and continuous modulation of a low-velocity intense source of cold atomic beam on the velocity or flux,which can be used in many fields, like the development of a cold atomic beam interferometer and atom lithography.

A Light Source System of Multi-star Simulator with Adjustable Background and Controllable Magnitude

A light source of multi-star simulator capable of background adjustment and magnitude control has been designed.Two integrating spheres are employed as the star-point light source and the background light source respectively.A beam splitter prism has been designed to serve as the beam combiner for the star-point and the background light sources,and a mathematical model has been constructed respectively to compute the light flux of the two integrating spheres.A magnitude testing system and a background testing system have been created using low-light illuminometer,luminance meter,and testing instruments to measure the star-point magnitude and the background luminance of the multi-star simulator.The test results suggest that the star-point magnitude is adjustable from0 to+5 m_v,with a simulation precision superior to ±0.026 m_v.The maximum background luminance is 3.8×10~5 cd·m^(-2),and the minimum background luminance is6.4×10^(-2)cd·m^(-2).The designed light source system can meet the requirements for simulating the stellar map with a sky background.

A Scheduling Strategy of Light Supplement in Agricultural Greenhouse Based on the Displacement of Light Source Group

LED can effectively promote the growth of crops and improve the yield of crops. In order to make the crops grow evenly in the agricultural greenhouse, the uniformity of illumination is very important. Because of the importance of illumination uniformity to the growth of crops, this paper intends to establish the illuminance model of light source without considering the influence factors such as the difference of each light source group and air scattering. On this basis, the reasonable layout of each light source position in the light source group is considered. Therefore, a light replenishment scheduling strategy based on the displacement of light source group is proposed in this paper Improve the uniformity of illumination in agricultural greenhouse and reduce its operation cost. Experiments show that the strategy is effective.

The design of Landscape lighting Based on wind, light, water and other green energy

Taking the ecological, environmental protection as the starting point, in view of our country road lighting with excessive power consumption problems, the paper proposes design scheme of S type spiral lamp that is suitable the coastal city, highway zone by solar energy combined with wind energy generation. This design uses class of S spiral with the highest wind energy utilization rate, and the surface has materials that can absorb solar energy, its structure built in simple and the design fit standard proportion lamp. This design has the advantages of beautiful apnearance, easv to produce, has the very big use value.

Intermediate energy light sources and the SSRF project

Advances in insertion device technology, top-up operation and superconducting RF cavities make it possible to generate high brightness X-ray with intermediate energy light sources, which leads a new trend in designing and constructing third generation light sources around the world. The development status and the remarkable technical features of intermediate energy light sources are reviewed, and the main SSRF properties are described in this paper.

Early gastric cancer diagnostic ability of ultrathin endoscope loaded with laser light source

BACKGROUND Conventionally, the low luminous intensity, low image resolution, and difficulty in operation have been reported with the ultrathin endoscope. However, it has markedly advanced recently. The improvement of the diagnostic ability is expected.AIM To compare the early gastric cancer diagnostic ability of an ultrathin endoscope loaded with a laser light source and that of the conventional endoscope.METHODS The target subjects were 375 consecutive patients who underwent endoscopy at our hospital for post-endoscopic submucosal dissection follow-up of gastric cancer from January to August 2018. During endoscopy, the ultrathin endoscope was used in 140 patients(37.3%), and the conventional endoscope was used in235 patients(62.7%). Patient background was adjusted using the propensity score matching method, and gastric cancer detection ability was evaluated in the two groups.RESULTS The gastric cancer detection rate was 7.8% in the ultrathin endoscope group and7.0% in the conventional endoscope group, and the mean intragastric observation time was 4.1 ± 1.7 min in the ultrathin endoscope group and 4.1 ± 1.9 min in the conventional endoscope group, showing no significant differences between the groups. Moreover, the biopsy implementation rate was 31.8% in the ultrathin endoscope group and 41.1% in the conventional endoscope group, and the biopsy prediction rate was 17.9% and 13.2%, respectively, showing no significant differences between the groups.CONCLUSION The gastric cancer diagnostic ability of the ultrathin endoscope loaded with a laser light source was comparable to that of the conventional endoscope. The observation time was also comparable. Thus, endoscopy using the ultrathin endoscope loaded with the laser light source would be the first option in screening examinations of gastric cancer due to its low invasion.

Fast recognition using convolutional neural network for the coal particle density range based on images captured under multiple light sources

A method based on multiple images captured under different light sources at different incident angles was developed to recognize the coal density range in this study.The innovation is that two new images were constructed based on images captured under four single light sources.Reconstruction image 1 was constructed by fusing greyscale versions of the original images into one image,and Reconstruction image2 was constructed based on the differences between the images captured under the different light sources.Subsequently,the four original images and two reconstructed images were input into the convolutional neural network AlexNet to recognize the density range in three cases:-1.5(clean coal) and+1.5 g/cm^(3)(non-clean coal);-1.8(non-gangue) and+1.8 g/cm^(3)(gangue);-1.5(clean coal),1.5-1.8(middlings),and+1.8 g/cm^(3)(gangue).The results show the following:(1) The reconstructed images,especially Reconstruction image 2,can effectively improve the recognition accuracy for the coal density range compared with images captured under single light source.(2) The recognition accuracies for gangue and non-gangue,clean coal and non-clean coal,and clean coal,middlings,and gangue reached88.44%,86.72% and 77.08%,respectively.(3) The recognition accuracy increases as the density moves further away from the boundary density.

Oil accumulation related to migration of source kitchens in the Lukeqin structural belt, Turpan-Hami Basin, China

The Lukeqin structural belt is the main heavy oil accumulation zone in the Turpan-Hami Basin. The recent discovery of light oil in the Triassic indicates that there may be multiple source kitchens contributing to the oil accumulation. According to oil geochemical analysis and oil-source correlation, the oil in deep and shallow reservoirs of the Lukeqin Oilfield presents different physical and saturated hydrocarbon mass spectrum characteristics. The Triassic heavy oil is from the northern Upper Permian lacustrine source rocks, and the light oil represented by the Yudong-9 Well is from the northwestern Lower Jurassic coal-measure source rocks. The timing of oil charging was determined by K/Ar isotope dating, reservoir fluid inclusion analysis and the evolution history of different source rocks. In summary, the accumulation process consists of two stages. From the end of Triassic to early Jurassic, the northern Permian source kitchen generated a considerable amount of oil, which was finally degraded to heavy oil, migrated to the south and then accumulated. The northwestern Jurassic coal-measure source kitchen began to generate oil at the end of Cretaceous, while the northern source kitchen could only generate a little hydrocarbon. The heavy oil and the light oil have different source rock locations, migration directions and accumulation times. The migration of hydrocarbon source kitchens affects the distribution of heavy oil and light oil reservoirs at the present time.

Adaptive illumination light source for online machine vision inspection of tin steel strips

The different reflection characteristics of the surface of tin steel strips and the different speeds of the tinning line demand an adaptive illumination light source for online machine vision inspection. This light source can be integrated with a time delay integration charge-coupled device （TDI CCD ） to capture the images of moving objects and facilitate inspection of the surface quality of tin steel strips. On-site application show the effectiveness of the TDI camera with the adaptive illumination light source in detecting the surface defects on tin steel strips of three different materials and with different tin coating weights.

Watts-level ultraviolet-CLED integrated light sources for efficient surface and air sterilization

With the epidemic of the coronavirus disease(COVID-19) infection, AlGaN-based ultraviolet-C light emitting diodes(UVC-LEDs) have attracted widespread attention for their sterilization application. However, the sterilization characters of high power integrated light sources(ILSs) haven’t been widely investigated before utilizing in public sanitary security. In this work,by integrating up to 195 UVC-LED chips, high power UVC-LED ILSs with a light output power(LOP) of 1.88 W were demonstrated. The UVC-LED ILSs were verified to have efficient and rapid sterilization capability, which have achieved more than99.9% inactivation rate of several common pathogenic microorganisms within 1 s. In addition, the corresponding air sterilization module based on them was also demonstrated to kill more than 97% of Staphylococcus albus in the air of 20 m3 confined room within 30 min. This work demonstrates excellent sterilization ability of UVC-LED ILSs with high LOP, revealing great potential of UVC-LEDs in sterilization applications in the future.

Implementation and uniformity calibration of LED array for photodynamic therapy

Irradiance uniformity is an important parameter for a Photodynamic Therapy(PDT)device.The calibration and verification of a LED array light source based on computer vision technology were implemented and carried out.First,the correlation coe±cients between the pulse width modulate value and the irradiance were calibrated.Then,the correction of the actual light center and divergence angle were solved by image processing to reduce errors from each LED lens.Finally,uniformity was optimized according to the irradiance formula of the Lambertian source.The lowest coe±cients of variation of irradiance were 4.87%in a 5 cm×12 cm area and 3.55%in a 3 cm×10 cm area within the depth range of 8–12 cm when the expected irradiance was 100 mW/cm^(2).This finding indicated that the light source can achieve a more uniform illumination and provide a better therapeutic effect for the PDT of port-wine stains.

Quantum light source devices of In(Ga)As semiconductor self-assembled quantum dots

A brief introduction of semiconductor self-assembled quantum dots (QDs) applied in single-photon sources is given. Single QDs in confined quantum optical microcavity systems are reviewed along with their optical properties and coupling characteristics. Subsequently, the recent progresses in In(Ga)As QDs systems are summarized including the preparation of quantum light sources, multiple methods for embedding single QDs into different microcavities and the scalability of single-photon emitting wavelength. Particularly, several In(Ga)As QD single-photon devices are surveyed including In(Ga)As QDs coupling with nanowires, InAs QDs coupling with distributed Bragg reflection microcavity and the In(Ga)As QDs coupling with micropillar microcavities. Furthermore, applications in the field of single QDs technology are illustrated, such as the entangled photon emission by spontaneous parametric down conversion, the single-photon quantum storage, the chip preparation of single-photon sources as well as the single-photon resonance-fluorescence measurements.

Preface to the Special Issue on Quantum Light Source from Semiconductors

The invention of laser has tremendously changed the world. Great efforts have been made to increase the laser power, in which each pulse contains many photons. On the other hand, researchers also play a lot of interests on the generation of a single photon in a single pulse, i.e., the single photon sources. Single photons and their strongly correlated components (e.g. entangled photons) have played critical roles in the development of quantum mechanics. Nowadays, these quantum light sources have also found important applications in modern quantum information processing, such as quantum communication, quantum metrology and quantum computation. Many different kinds of methods have been developed to generate these quantum light sources. Semiconductors are of particular appealing materials.