Direct Pointwise Comparison of FE Predictions to StereoDIC Measurements:Developments and Validation Using Double Edge-Notched Tensile Specimen

To compare finite element analysis(FEA)predictions and stereovision digital image correlation(StereoDIC)strain measurements at the same spatial positions throughout a region of interest,a field comparison procedure is developed.The procedure includes(a)conversion of the finite element data into a triangular mesh,(b)selection of a common coordinate system,(c)determination of the rigid body transformation to place both measurements and FEA data in the same system and(d)interpolation of the FEA nodal information to the same spatial locations as the StereoDIC measurements using barycentric coordinates.For an aluminum Al-6061 double edge notched tensile specimen,FEA results are obtained using both the von Mises isotropic yield criterion and Hill’s quadratic anisotropic yield criterion,with the unknown Hill model parameters determined using full-field specimen strain measurements for the nominally plane stress specimen.Using Hill’s quadratic anisotropic yield criterion,the point-by-point comparison of experimentally based full-field strains and stresses to finite element predictions are shown to be in excellent agreement,confirming the effectiveness of the field comparison process.

Evaluation of Arterial Signal Coordination with Commercial Connected Vehicle Data: Empirical Traffic Flow Visualization and Performance Measurement

Emerging connected vehicle (CV) data sets have recently become commercially available, enabling analysts to develop a variety of powerful performance measures without deploying any field infrastructure. This paper presents several tools using CV data to evaluate traffic progression quality along a signalized corridor. These include both performance measures for high-level analysis as well as visualizations to examine details of the coordinated operation. With the use of CV data, it is possible to assess not only the movement of traffic on the corridor but also to consider its origin-destination (O-D) path through the corridor. Results for the real-world operation of an eight-intersection signalized arterial are presented. A series of high-level performance measures are used to evaluate overall performance by time of day, with differing results by metric. Next, the details of the operation are examined with the use of two visualization tools: a cyclic time-space diagram (TSD) and an empirical platoon progression diagram (PPD). Comparing flow visualizations developed with different included O-D paths reveals several features, such as the presence of secondary and tertiary platoons on certain sections that cannot be seen when only end-to-end journeys are included. In addition, speed heat maps are generated, providing both speed performance along the corridor and locations and the extent of the queue. The proposed visualization tools portray the corridor’s performance holistically instead of combining individual signal performance metrics. The techniques exhibited in this study are compelling for identifying locations where engineering solutions such as access management or timing plan change are required. The recent progress in infrastructure-free sensing technology has significantly increased the scope of CV data-based traffic management systems, enhancing the significance of this study. The study demonstrates the utility of CV trajectory data for obtaining high-level details of the corridor performance as well as drilling down into the minute specifics.

Recent progress in nuclear data measurement for ADS at IMP

Recent progress in nuclear data measurement for ADS at Institute of Modern Physics is reviewed briefly.Based on the cooler storage ring of the Heavy Ion Research Facility in Lanzhou, nuclear data terminal was established.The nuclear data measurement facility for the ADS spallation target has been constructed, which provides a very important platform for the experimental measurements of spallation reactions. A number of experiments have been conducted in the nuclear data terminal. A Neutron Time-of-Flight(NTOF)spectrometer was developed for the study of neutron production from spallation reactions related to the ADS project.The experiments of 400 MeV/u ^(16)O bombarded on a tungsten target were presented using a NTOF spectrometer.Neutron yields for 250 MeV protons incident on a thick grain-made tungsten target and a thick solid lead target have been measured using the water-bath neutron activation method. Spallation residual productions were studied by bombarding W and Pb targets with a 250 MeV proton beam using the neutron activation method. Benchmarking of evaluated nuclear data libraries was performed for D-T neutrons on ADS relevant materials by using the benchmark experimental facility at the China Institute of Atomic Energy.

A multi-sensor-based distributed real-time measurement system for glacier deformation

Glacier disasters occur frequently in alpine regions around the world,but the current conventional geological disaster measurement technology cannot be directly used for glacier disaster measurement.Hence,in this study,a distributed multi-sensor measurement system for glacier deformation was established by integrating piezoelectric sensing,coded sensing,attitude sensing technology and wireless communication technology.The traditional Modbus protocol was optimized to solve the problem of data identification confusion of different acquisition nodes.Through indoor wireless transmission,adaptive performance analysis,error measurement experiment and landslide simulation experiment,the performance of the measurement system was analyzed and evaluated.Using unmanned aerial vehicle technology,the reliability and effectiveness of the measurement system were verified on the site of Galongla glacier in southeastern Tibet,China.The results show that the mean absolute percentage errors were only 1.13%and 2.09%for the displacement and temperature,respectively.The distributed glacier deformation real-time measurement system provides a new means for the assessment of the development process of glacier disasters and disaster prevention and mitigation.

Strategy for Data Stream Processing Based on Measurement Metadata: An Outpatient Monitoring Scenario

In this work we discuss SDSPbMM, an integrated Strategy for Data Stream Processing based on Measurement Metadata, applied to an outpatient monitoring scenario. The measures associated to the attributes of the patient (entity) under monitoring, come from heterogeneous data sources as data streams, together with metadata associated with the formal definition of a measurement and evaluation project. Such metadata supports the patient analysis and monitoring in a more consistent way, facilitating for instance: i) The early detection of problems typical of data such as missing values, outliers, among others;and ii) The risk anticipation by means of on-line classification models adapted to the patient. We also performed a simulation using a prototype developed for outpatient monitoring, in order to analyze empirically processing times and variable scalability, which shed light on the feasibility of applying the prototype to real situations. In addition, we analyze statistically the results of the simulation, in order to detect the components which incorporate more variability to the system.

Data Fusion Method for Manufacturing Measurement

A data fusion method of online multisensors is prop os ed in this paper based on artificial neuron. First, the dynamic data fusion mode l on artificial neuron is built. Then the calibration of data fusion is discusse d with self-adaptive weighing technique. Finally performance of the method is d emonstrated by an online vibration measurement case. The results show that the f used data are more stable, sensitive, accurate, reliable than that of single sen sor data.

Orthogonal Series Estimation of Nonparametric Regression Measurement Error Models with Validation Data

In this article we study the estimation method of nonparametric regression measurement error model based on a validation data. The estimation procedures are based on orthogonal series estimation and truncated series approximation methods without specifying any structure equation and the distribution assumption. The convergence rates of the proposed estimator are derived. By example and through simulation, the method is robust against the misspecification of a measurement error model.

Estimation of Nonparametric Multiple Regression Measurement Error Models with Validation Data

In this article, we develop estimation approaches for nonparametric multiple regression measurement error models when both independent validation data on covariables and primary data on the response variable and surrogate covariables are available. An estimator which integrates Fourier series estimation and truncated series approximation methods is derived without any error model structure assumption between the true covariables and surrogate variables. Most importantly, our proposed methodology can be readily extended to the case that only some of covariates are measured with errors with the assistance of validation data. Under mild conditions, we derive the convergence rates of the proposed estimators. The finite-sample properties of the estimators are investigated through simulation studies.

On Human Autonomic Nervous Activity Related to Weather Conditions Based on Big Data Measurement via Smartphone

This research uses our previously-developed smartphone camera-based heart rate change analysis system to survey the correlation between weather patterns and the autonomic nervous activity across a big data set of approximately 200,000 entries. The results showed a trend in which a significant decrease was seen in sympathetic nervous activity in both males and females—the higher the temperature. In addition, a significant increase was seen in the sympathetic nervous system in both males and females—the higher the atmospheric pressure. Lastly, a significant decrease was seen in the sympathetic nervous system in both males and females—the more precipitation there was. These results accord with prior research and with human biological phenomena, and we were able to use a data set of approximately 200,000 entries to statistically demonstrate our hypothesis. We believe this represents a valuable set of reference data for use in the health care.

On Human Autonomic Nervous Activity Related to Behavior, Daily and Regional Changes Based on Big Data Measurement via Smartphone

This research uses a large amount of autonomic nervous system data (approximately 100,000 entries) to investigate the relationship between human autonomic nervous activity and behaviors, daily and regional changes. Data were measured via a heart rate variability analysis system that utilizes the camera of smartphones. This system was developed by the authors during previous research. The relations between autonomic nervous system and behaviors, total power and sympathetic nervous activity were found to rise after waking, while during leisure time, the total power rises and sympathetic nervous activity is inhibited. Concerning the relationship between autonomic nervous system and day of the week, it was found that total power decreases from the middle through the latter part of the week (namely, Wednesday, Thursday, and Friday), while it rises on Saturday, while the sympathetic nervous activity is suppressed on Saturday. Regarding the relationship between autonomic nervous system and region, it was found that total power is lower in the Kanto region of Japan than in others. This study also shows statistical proof (using a large amount of measurement data) to ideas held by the public for years. Thus, the data can be considered meaningful to the society, and the authors hope that it helps to improve work-life balance.

Stochastic bounded consensus tracking of leader-follower multi-agent systems with measurement noises and sampled-data

This paper is concerned with the stochastic bounded consensus tracking problems of leader-follower multi-agent systems, where the control input of an agent can only use the information measured at the sampling instants from its neighbours or the virtual leader with a time-varying reference state, and the measurements are corrupted by random noises. The probability limit theory and the algebra graph theory are employed to derive the necessary and sufficient conditions guaranteeing the mean square bounded consensus tracking. It is shown that the maximum allowable upper boundary of the sampling period simultaneously depends on the constant feedback gains and the network topology. Furthermore, the effects of the sampling period on the tracking performance are analysed. It turns out that from the view point of the sampling period, there is a trade-off between the tracking speed and the static tracking error. Simulations are provided to demonstrate the effectiveness of the theoretical results.

Macro-Analysis on Across-Fault Crustal Deformation Measurement Data Along the Northern Edge of the Qinghai-Xizang Block

Based on the arrangement of the across-fault measurement data along the northern edge of the Qinghai-Xizang block,we divide the deformation into different types and probe the nature of various fault movements based on these types.The recent situation of tectonic movement of main structural belts and seismicity in this area are expounded.From the above,it is concluded that across-fault measurement can reflect not only the conditions of fault movement nearby but also the change of regional stress fields; not only is this a method to obtain regional seismogenic information and to conduct short-term prediction but it is also involved with large scale space-time prediction of moderate and strong earthquakes on the basis of the macro characteristics of fractures.

Asymptotic bounded consensus tracking of double-integrator multi-agent systems with bounded-jerk target based on sampled-data without velocity measurements

This paper investigates asymptotic bounded consensus tracking（ABCT） of double-integrator multi-agent systems（MASs） with an asymptotically-unbounded-acceleration and bounded-jerk target（AUABJT） available to partial agents based on sampled-data without velocity measurements. A sampled-data consensus tracking protocol（CTP） without velocity measurements is proposed to guarantee that double-integrator MASs track an AUABJT available to only partial agents.The eigenvalue analysis method together with the augmented matrix method is used to obtain the necessary and sufficient conditions for ABCT. A numerical example is provided to illustrate the effectiveness of theoretical results.

Block-based test data adequacy measurement criteria and test complexity metrics

On the basis of software testing tools we developed for progrmnming languages, we firstly present a new control flowgraph model based on block. In view of the notion of block, we extend the traditional program-based software test data adequacy measurement criteria, and empirically analyze the subsume relation between these measurement criteria. Then, we define four test complexity metrics based on block. They are J-complexity 0; J-complexity 1 ; J-complexity 1 + ; J-complexity 2. Finally, we show the Kiviat diagram that makes software quality visible.

Curvature Quantified Douglas-Peucker-based Phasor Measurement Unit Data Compression Method for Power System Situational Awareness

Facing constraints imposed by storage and bandwidth limitations,the vast volume of phasor meas-urement unit(PMU)data collected by the wide-area measurement system(WAMS)for power systems cannot be fully utilized.This limitation significantly hinders the effective deployment of situational awareness technologies for systematic applications.In this work,an effective curvature quantified Douglas-Peucker(CQDP)-based PMU data compression method is proposed for situational awareness of power systems.First,a curvature integrated distance(CID)for measuring the local flection and fluc-tuation of PMU signals is developed.The Doug-las-Peucker(DP)algorithm integrated with a quan-tile-based parameter adaptation scheme is then proposed to extract feature points for profiling the trends within the PMU signals.This allows adaptive adjustment of the al-gorithm parameters,so as to maintain the desired com-pression ratio and reconstruction accuracy as much as possible,irrespective of the power system dynamics.Fi-nally,case studies on the Western Electricity Coordinat-ing Council(WECC)179-bus system and the actual Guangdong power system are performed to verify the effectiveness of the proposed method.The simulation results show that the proposed method achieves stably higher compression ratio and reconstruction accuracy in both steady state and in transients of the power system,and alleviates the compression performance degradation problem faced by existing compression methods.Index Terms—Curvature quantified Douglas-Peucker,data compression,phasor measurement unit,power sys-tem situational awareness.

A Moored Underwater Energy Conservation System for Profiling Measurement

There is a need to obtain the hydrologic data including ocean current, wave, temperature and so on in the South China Sea. A new profiling instrument which does not suffer from the damage due to nature forces or incidents caused by passing ships, is under development to acquire data from this area. This device is based on a taut single point mid-water mooring system. It incorporates a small, instrumented vertically profiling float attached via an electromechanical cable to a winch integral with the main subsurface flotation. On a pre-set schedule, the instrument float with sensors is winched up to the surface if there is no ship passing by, which is defined by an on-board miniature sonar. And it can be. inunediately winched down to a certain depth if the sonar sensor finds something is coming. Since, because of logistics, the area can only be visited once for a long time and a minimum of 10 times per day profiles are desired, energy demands are severe. To respond to these concerns, the system has been designed to conserve a substantial portion of the potential energy lost during the ascent phase of each profile and subsequently use this energy to pull the instrument down. Compared with the previous single-point layered measuring mode, it is advanced and economical. At last the paper introduces the test in the South China Sea.

基于．NET及Measurement Studio的USB型测试系统研制

介绍了一种基于．NET框架环境及Measurement Studio．NET的USB接口型通用多路高速并行采集测试分析系统的开发,以及针对振动设备监测的常用算法开发应用。该系统充分体现虚拟仪器的概念,以计算机为主体,以测试分析软件为核心,配备传感器、数据采集模块等外围设备,以较低的成本,完成了各种传统信号测试仪器的功能。测试系统软件建立在．NET开发平台上,以C#语言与NI公司的Measurement Studio混合编程实现测试算法及用户界面。另外,系统界面友好、操作简便、可移植性强,已在振动设备测试方面进行了初步应用。

Nonlinear Measurement Function in the Ensemble Kalman Filter

ABSTRACT The optimal Kalman gain was analyzed in a rigorous statistical framework. Emphasis was placed on a comprehensive understanding and interpretation of the current algorithm, especially when the measurement function is nonlinear. It is argued that when the measurement function is nonlinear, the current ensemble Kalman Filter algorithm seems to contain implicit assumptions： the forecast of the measurement function is unbiased or the nonlinear measurement function is linearized. While the forecast of the model state is assumed to be unbiased, the two assumptions are actually equivalent. On the above basis, we present two modified Kalman gain algorithms. Compared to the current Kalman gain algorithm, the modified ones remove the above assumptions, thereby leading to smaller estimated errors. This outcome was confirmed experimentally, in which we used the simple Lorenz 3-component model as the test-bed. It was found that in such a simple nonlinear dynamical system, the modified Kalman gain can perform better than the current one. However, the application of the modified schemes to realistic models involving nonlinear measurement functions needs to be further investigated.