Hydraulics of crest spillway with large unit discharge and low Froude number

With respect to the crest spillway with large unit discharge and low Froude number, the hydraulics of the slit-type energy dissipater at the outlet should be noticed due to the complicated flow regimes. In the present paper, some issues about hydraulic characteristics were experimentally investigated by means of five slit-type outlets and four tetrahedrons, including the flow choking, impact to river banks and jet trajectory. The main findings are as follows. The critical Froude number for the flow choking decreases with increasing outlet width of the slit-type energy dissipater. If the flow Froude number is expressed by the parameters just before this energy dissipater, the tetrahedron placed inside the side wall of the outlet could efficiently avoid the flow impact to the river bank of same side, and compared with the jet trajectory of the slit-type energy dissipater, the outlet with tetrahedron has different trajectory trend, i.e., the distance of the jet trajectory decreases with the increase of the water head due to special form of the outlet tetrahedron.

Numerical analysis of flow separation zone in a confluent meander bend channel

The flow pattern in the confluent meander bend channel under the conditions of different discharge ratios and junction angles is numerically simulated by means of the large eddy simulation（LES）, and the characteristics of the flow separation zone are analyzed. Numerical results are well validated by experimental data with a good agreement. Analysis of the vertical confinement shows that the turbulence within the separation zone can be characterized as quasi-2-D. Details of the separation zone characteristics are revealed as shown by mean velocity isolines. According to the analysis of numerical results, the length and the width of the separation zone generally increase with the increase of the discharge ratio and the junction angle. However, the width of the separation zone keeps substantially constant when the junction angle increases from 60 o to90o. The dimensionless shape of the separation zone is nearly the same for three discharge ratios and three junction angles. The formulas of the relative width and the relative length of the separation zone are obtained by means of the polynomial fit method.