Theoretical Analysis on Deflection and Bearing Capacity of Prestressed Bamboo-Steel Composite Beams

A theoretical analysis of upward deflection and midspan deflection of prestressed bamboo-steel composite beams is presented in this study.The deflection analysis considers the influences of interface slippage and shear deformation.Furthermore,the calculation model for flexural capacity is proposed considering the two stages of loading.The theoretical results are verified with 8 specimens considering different prestressed load levels,load schemes,and prestress schemes.The results indicate that the proposed theoretical analysis provides a feasible prediction of the deflection and bearing capacity of bamboo-steel composite beams.For deflection analysis,the method considering the slippage and shear deformation provides better accuracy.The theoretical method for bearing capacity matches well with the test results,and the relative errors in the serviceability limit state and ultimate limit state are 4.95%and 5.85%,respectively,which meet the accuracy requirements of the engineered application.

Beam and image experiment of beam deflection electron gun for distributed X-ray sources

Distributed X-ray sources comprise a single vacuum chamber containing multiple X-ray sources that are triggered and emit X-rays at a specific time and location. This process facilitates an application for innovative system concepts in X-ray and computer tomography. This paper proposes a novel electron beam focusing, shaping,and deflection electron gun for distributed X-ray sources.The electron gun uses a dispenser cathode as an electron emitter, a mesh grid to control emission current, and two electrostatic lenses for beam shaping, focusing, and deflection. Novel focusing and deflecting electrodes were designed to increase the number of focal spots in the distributed source. Two identical half-rectangle opening electrodes are controlled by adjusting the potential of the two electrodes to control the electron beam trajectory, and then, multifocal spots are obtained on the anode target. The electron gun can increase the spatial density of the distributed X-ray sources, thereby improving the image quality. The beam experimental results show that the focal spot sizes of the deflected(deflected amplitude 10.5 mm)and non-deflected electron beams at full width at half maximum are 0.80 mm 90.50 mm and 0.55 mm 90.40 mm, respectively(anode voltage 160 kV; beam current 30 mA). The imaging experimental results demonstrate the excellent spatial resolution and time resolution of an imaging system built with the sources, which has an excellent imaging effect on a field-programmable gate array chip and a rotating metal disk.

BIPARAMETRIC PERTURBATION SOLUTIONS OF LARGE DEFLECTION PROBLEM OF CANTILEVER BEAMS

The large deflection problem of cantilever beams was studied by means of the biparametric perturbation method and the first order derivative substitution from pseudolinear analysis approach. This kind of substitution can transform the basic equation, an integral differential equation into nonlinear algebraic ones, thus simplify computational process. Compared with present results, it indicates that the large deflection problem solved by using pseudolinear analysis can lead to simple and precise results.

Large deflection of curved elastic beams made of Ludwick type material

The large deflection of an axially extensible curved beam with a rectangular cross-section is investigated. The elastic beam is assumed to satisfy the Euler-Bernoulli postulation and be made of the Ludwick type material. Through reasonably simplified integration, the strain and curvature of the axis of the beam are presented in implicit formulations. The governing equations involving both geometric and material nonlin- earities of the curved beam are derived and solved by the shooting method. When the initial curvature of the beam is zero, the curved beam is degenerated into a straight beam, and the predicted results obtained by the present model are consistent with those in the open literature. Numerical examples are further given for curved cantilever and simply supported beams, and the couplings between elongation and bending are found for the curved beams.

NONLINEAR FLEXURAL WAVES IN LARGE-DEFLECTION BEAMS

The equation of motion for a large-deflection beam in the Lagrangian description are derived using the coupling of flexural deformation and midplane stretching as a key source of nonlinearity and taking into account the transverse, axial and rotary inertia effects. Assuming a traveling wave solution, the nonlinear partial differential equations are then transformed into ordinary differential equations. Qualitative analysis indicates that the system can have either a homoclinic orbit or a heteroclinic orbit, depending on whether the rotary inertia effect is taken into account. Furthermore, exact periodic solutions of the nonlinear wave equations are obtained by means of the Jacobi elliptic function expansion. When the modulus of the Jacobi elliptic function m→1 in the degenerate case, either a solitary wave solution or a shock wave solution can be obtained.

Large deflection of flexible tapered functionally graded beam

In this paper the semi-analytical analyses of the flexible cantilever tapered functionally graded beam under combined inclined end loading and intermediate loading are studied.In order to derive the fully non-linear equations governing the non-linear deformation,a curvilinear coordinate system is introduced.A general non-linear second order differential equation that governs the shape of a deflected beam is derived based on the geometric nonlinearities,infinitesimal local displacements and local rotation concepts with remarkable physical properties of functionally graded materials.The solutions obtained from semi-analytical methods are numerically compared with the existing elliptic integral solution for the case of a flexible uniform cantilever functionally graded beam.The effects of taper ratio,inclined end load angle and material property gradient on large deflection of the beam are evaluated.The Adomian decomposition method will be useful toward the design of tapered functionally graded compliant mechanisms driven by smart actuators.

Large deflections of non-prismatic nonlinearly elastic cantilever beams subjected to non-uniform continuous load and a concentrated load at the free end

This work studies large deflections of slen- der, non-prismatic cantilever beams subjected to a combined loading which consists of a non-uniformly distributed con- tinuous load and a concentrated load at the free end of the beam. The material of the cantilever is assumed to be non- linearly elastic. Different nonlinear relations between stress and strain in tensile and compressive domain are considered. The accuracy of numerical solutions is evaluated by com- paring them with results from previous studies and with a laboratory experiment.

Determination of Kinetic Parameters and Metal Ions in Urea-Urease System Based on the Biochemical Reaction Heat Induced Laser Beam Deflection

A new analytical method for the determination of urea-urease system based on biochemical reaction heat induced laser beam deflection is presented in this paper. With the method, the Michaelis constant (K-m) of urease and apparent inhibition constant (K-i) of some metal ion inhibitors were measured respectively. This method was also used for the quantitative determination of metal ions with satisfactory result.

A nonlinear mathematical model for large deflection of incompressible saturated poroelastic beams

Nonlinear governing equations are established for large deflection of incompressible fluid saturated poroelastic beams under constraint that diffusion of the pore fluid is only in the axial direction of the deformed beams. Then, the nonlinear bending of a saturated poroelastic cantilever beam with fixed end impermeable and flee end permeable, subjected to a suddenly applied constant concentrated transverse load at its free end, is examined with the Gaierkin truncation method. The curves of deflections and bending moments of the beam skeleton and the equivalent couples of the pore fluid pressure are shown in figures. The results of the large deflection and the small deflection theories of the cantilever poroelastic beam are compared, and the differences between them are revealed. It is shown that the results of the large deflection theory are less than those of the corresponding small deflection theory, and the times needed to approach its stationary states for the large deflection theory are much less than those of the small deflection theory.

Large Deflection Dynamic Response Analysis of Flexible Hull Beams by the Multibody System Method

In this paper the large deflection dynamic problems of Euler beams are investigated. The vibration control equations are derived based on the multibody system method. A numerical procedure for solving the resulting differential algebraic equations is presented on the basis of the Newmark direct integration method combined with the Newton-Raphson iterative method. The sub beams are treated as small deformation in the convected coordinate systems, which can greatly simplify the deformation description. The rigid motions of the sub beams are taken into account through the motions of the convected coordinate systems. Numerical ex- amples are carried out, where results show the effectiveness of the proposed method.

Phase matched scanning optical parametric chirped pulse amplification based on pump beam deflection

Combined with the optical beam deflection,a novel approach of phase matched broadband scanning optical parametric chirped pulse amplification(OPCPA)was proposed.For this scheme,there was no superfluous operations to the chirped signal pulse which propagated in a changeless direction straightforward,but the pump beam were deflected in space with time by passing through a KTN crystal,which was applied with varied driving voltage.The theories of phase matching of each chirped signal frequency based on pump beam deflection was analyzed detailedly.And the type-I amplification of chirped signal with 800 nm central wavelength and 20 nm bandwidth pumped by 532 nm in BBO crystal was simulated as a case in point.The simulation results showed that the spectral distribution of chirped signal pulse was almost the same as the initial form,i.e.,there was nearly no narrowing on the amplified spectrum by using of the scanning OPCPA based on pump beam deflection.In addition,the simulations demonstrated that it was worth minimizing the voltage deviation applied to KTN crystal as much as possible for the sake of better waveform,larger bandwidth and higher conversion efficiency of amplified signal pulse in the proposed scanning OPCPA.

Comparative Analysis of the Deflections of Two Beams Using the Finite Difference Method

In this paper,a comparative analysis of two beams’deflections,one supported-embedded beam and a bi-supported beam,is presented.For such comparison,first the respective second-order linear Ordinary Differential Equations(ODEs)were obtained.Along with the boundary conditions,there are two Boundary Value Problems(BVPs),making it possible to perform their numerical and analytical solutions.For numerical solutions,a Matlab algorithm was implemented based on the Finite Difference Method(FDM).The analytical solutions were also obtained for comparison with the numerical ones and with the validation method.In the end we analyzed the shapes of the elastic lines of the two beams caused by the loads coming from the weight of each one.

Nonlinear flexural waves and chaos behavior in finite-deflection Timoshenko beam

Based on the Timoshenko beam theory, the finite-deflection and the axial inertia are taken into account, and the nonlinear partial differential equations for flexural waves in a beam are derived. Using the traveling wave method and integration skills, the nonlinear partial differential equations can be converted into an ordinary differential equation. The qualitative analysis indicates that the corresponding dynamic system has a heteroclinic orbit under a certain condition. An exact periodic solution of the nonlinear wave equation is obtained using the Jacobi elliptic function expansion. When the modulus of the Jacobi elliptic function tends to one in the degenerate case, a shock wave solution is given. The small perturbations are further introduced, arising from the damping and the external load to an original Hamilton system, and the threshold condition of the existence of the transverse heteroclinic point is obtained using Melnikov＇s method. It is shown that the perturbed system has a chaotic property under the Smale horseshoe transform.

Analytic Static Deflection Solutions of Uniform Cantilever Beams Resting on Nonlinear Elastic Rotational Boundary

In the paper,the analytic static deflection solutions of uniform cantilever beams resting on nonlinear elastic rotational boundary are developed by the Modified Adomian Decomposition Method(MADM).If the applied force function is an analytic function,then the deflection function can be derived and expressed in Maclaurin series.A recurrence relation for the coefficients of the Maclaurin series is derived.It is shown that the proposed solution method is accurate and efficient.The solution method can be successfully applied to the uniform cantilever beam and non-linear elastic rotational boundary problem.

SECOND ORDER APPROXIMATION SOLUTION OF NONLINEAR LARGE DEFLECTION PROBLEMS OF YONGJIANG RAILWAY BRIDGE IN NINGBO

The solution and computational aspects on nonlinear deflection of Yongjiang Railway Bridge in Ningbo were investigated. An approximate iteration algorithm on nonlinear governing equation was presented, and the obtained results show that, if altitude difference and span of the riverbanks are taken as 5 meters and 100 meters, respectively, the maximum gradient in the middle of the bridge exceeds 5%, much larger than maximum allowance gradient in railway design code. Therefore, a new solution scheme for decreasing gradient of the bridge is put forward, that is, the altitude difference between two riverbanks can be decreased to about 1/10 of the initial magnitude by building roadbeds with 0.5% gradient and 1 kilometer length at two riverbanks. As a direct result, the deflection gradient of the railway bridge is much reduced and the value is between 0.5% similar to 0.6%.

Control Schemes for Driving Electro-optic Array Beam Deflectors

The beam deflectors based on electro-optic phased array（EOPA） is mainly described, and then an analysis on existing control schemes for driving the EOPA beam deflectors, based on custom hard-wired electronics or based on software in a microcontroUer, is made. Compared with these, a driving and control system for a multi-channel EOPA beam deflector is presented, in which the control assignment is implemented with a field programmable gate array（FPGA） chip. For different performance requirements, two control schemes, one with the serial scheme and another with the parallel scheme, have been explored and rapidly prototyped in Xilinx FPGA chips. With the control structures for the EOPA beam deflector, scanning rates of 588 kHz and 5 MHz can be respectivelv reached.

A Doubly Achromatic Two-magnet Nonuniform Field Bending System of 270° in Deflection

A new doubly achromatic two-magnet beam bending system is described.Itconsists of two nonuniform dipoles separated by a small drift space.Some doublyachromatic relations are derived.The system showed excellent achromatic and focusingproperties and good quality of electron beam with small diameter.Very small diver-gence and axial symmetry were produced at the output of the system.The system isspecially suitable for low energy electron linac beam with large energy spread.

Indentation of sandwich beams with metal foam core

The quasi-static indentation behavior of sandwich beams with a metal foam core was investigated. An analytical model was developed to predict the large deflections of indention of the sandwich beams with a metal foam core subjected to a concentrated loading. The interaction of plastic bending and stretching in the local deformation regions of the face sheet was considered in the analytical model. Moreover, the effects of the shear strength of the foam core on the indentation behavior were discussed in detail. The finite element simulations were preformed to validate the theoretical model. Comparisons between the analytical predictions and finite element results were conducted and good agreement was achieved. The results show that the membrane force dominates indentation behavior of the sandwich beams when the maximum deflection exceeds the thickness of the face sheet.

考虑混凝土收缩和徐变的钢混组合梁挠度分析

钢混组合梁需要设置预拱度以抵消荷载、混凝土收缩和徐变等因素导致的挠度。采用板壳单元和实体单元描述钢箱梁和钢筋混凝土桥面,建立大跨度钢混组合简支梁的有限元模型,并采用等效降温法和有效模量法分别描述混凝土收缩和徐变的影响,分析了长期挠度变化规律,并与实测值进行对比验证。结果表明,考虑混凝土收缩和徐变后的长期挠度仅为经验预拱度的58%,不利于成桥线型控制。

Rectangular dielectric metagrating for high-efficiency diffraction with large-angle deflection

In this Letter,we propose a metagrating consisting of simple rectangular bars for nearly unity anomalous diffraction with a large deflection angle.The analysis performed by the scattering-matrix method shows that such exceptional beam steering derives from the couplings of the two lowest propagation waveguide-array-modes and their constructive interferences.The tolerance of the incident angle for a high diffraction efficiency(e.g.,>90%)is within a range of 33°.We also discuss that such an advantage still exists after considering a reasonable loss and dispersion.We envision that the proposed strategy may have wide use in the field of high-performance wavefront-shaping applications.