[Objective] This study aimed to analyze the baking cost and benefit under different tobacco loading patterns, and to further explore labor-and cost-saving measures for modern tobacco agriculture. [Method] The cost and...[Objective] This study aimed to analyze the baking cost and benefit under different tobacco loading patterns, and to further explore labor-and cost-saving measures for modern tobacco agriculture. [Method] The cost and benefit of baking under three different tobacco loading patterns in a bulk curing barn were analyzed from the perspectives of baking equipment cost, labor cost, energy consumption and comprehensive income. The upper, middle and lower tobacco leaves were detected. [Result] Compared with conventional loading pattern, loose-leaf stacking and needle- style tobacco clip loading patterns significantly reduced the labor costs and energy costs during tobacco curing. The comprehensive benefits of tobacco clip and looseleaf stacking loading patterns were higher than that of conventional loading pattern, and the benefits of dry tobacco was improved by 0.67 and 1.07 yuan/kg, respec- tively. The benefit of loose-leaf stacking loading pattern was higher than that of to bacco clip loading pattern, [Conclusion] Among the three loading patterns, the loading pattern of loose-leaf stacking is most worthy of popularization and application.展开更多
A new optimization method for the optimization of stacking of composite glass fiber laminates is developed. The fiber orientation and angle of the layers of the cylindrical shells are sought considering the buckling l...A new optimization method for the optimization of stacking of composite glass fiber laminates is developed. The fiber orientation and angle of the layers of the cylindrical shells are sought considering the buckling load. The proposed optimization algorithm applies both finite element analysis and the mode-pursuing sampling （MPS）method. The algorithms suggest the optimal stacking sequence for achieving the maximal buckling load. The procedure is implemented by integrating ANSYS and MATLAB. The stacking sequence designing for the symmetric angle-ply three-layered and five-layered composite cylinder shells is presented to illustrate the optimization process, respectively. Compared with the genetic algorithms, the proposed optimization method is much faster and efficient for composite staking sequence plan.展开更多
Present mobile communication system suffers from the exponentially increased mobile traffic and research on the fifth generation(5G) mobile network architectures is ongoing to solve this problem. We investigate the fe...Present mobile communication system suffers from the exponentially increased mobile traffic and research on the fifth generation(5G) mobile network architectures is ongoing to solve this problem. We investigate the feasibility of the proposals used for the network architecture evolution from 4G to 5G and first propose a compatible network architecture, which decouples the management plane, the control plane and the user plane based on NO Stack framework proposed in our previous study. We mainly design detail procedures including UE attachment, service request and dedicated bearer activation/deactivation for our proposal network architecture. Finally, we establish a clear analytical mode of the application and system states to evaluate the signaling loads of new architecture. Simulation results show that our proposal network architecture with elaborated signaling procedures has much impact on the total signaling loads of system and could obviously decrease the signaling overhead compared with LTE.展开更多
The design of a seven-band stacked patch antenna for the C, X and Ku band is presented. The antenna consists of an H-slot loaded fed patch, stacked with dual U-slot loaded rectangular patch to generate the seven frequ...The design of a seven-band stacked patch antenna for the C, X and Ku band is presented. The antenna consists of an H-slot loaded fed patch, stacked with dual U-slot loaded rectangular patch to generate the seven frequency bands. The total size of the antenna is 39.25 × 29.25 mm2. The multiband stacked patch antenna is studied and designed using IE3D simulator. For verification of simulation results, the antenna is analyzed by circuit theory concept. The simulated return loss, radiation pattern and gain are presented. Simulated results show that the antenna can be designed to cover the frequency bands from (4.24 GHz to 4.50 GHz, 5.02 GHz to 5.25 GHz) in C-band application, (7.84 GHz to 8.23 GHz) in X-band and (12.16 GHz to 12.35 GHz, 14.25 GHz to 14.76 GHz, 15.25 GHz to 15.51 GHz, 17.52 GHz to 17.86 GHz) in Ku band applications. The bandwidths of each band of the proposed antenna are 5.9%, 4.5%, 4.83%, 2.36%, 3.53%, 1.68% and 1.91%. Similarly the gains of the proposed band are 2.80 dBi, 4.39 dBi, 4.54 dBi, 10.26 dBi, 8.36 dBi and 9.91 dBi, respectively.展开更多
文摘为了解决单个神经网络预测的局限性和时间序列的波动性,提出了一种奇异谱分析(singular spectrum analysis,SSA)和Stacking框架相结合的短期负荷预测方法。利用随机森林筛选出与历史负荷相关性强烈的特征因素,采用SSA为负荷数据降噪,简化模型计算过程;基于Stacking框架,结合长短期记忆(long and short-term memory,LSTM)-自注意力机制(self-attention mechanism,SA)、径向基(radial base functions,RBF)神经网络和线性回归方法集成新的组合模型,同时利用交叉验证方法避免模型过拟合;选取PJM和澳大利亚电力负荷数据集进行验证。仿真结果表明,与其他模型比较,所提模型预测精度高。
文摘[Objective] This study aimed to analyze the baking cost and benefit under different tobacco loading patterns, and to further explore labor-and cost-saving measures for modern tobacco agriculture. [Method] The cost and benefit of baking under three different tobacco loading patterns in a bulk curing barn were analyzed from the perspectives of baking equipment cost, labor cost, energy consumption and comprehensive income. The upper, middle and lower tobacco leaves were detected. [Result] Compared with conventional loading pattern, loose-leaf stacking and needle- style tobacco clip loading patterns significantly reduced the labor costs and energy costs during tobacco curing. The comprehensive benefits of tobacco clip and looseleaf stacking loading patterns were higher than that of conventional loading pattern, and the benefits of dry tobacco was improved by 0.67 and 1.07 yuan/kg, respec- tively. The benefit of loose-leaf stacking loading pattern was higher than that of to bacco clip loading pattern, [Conclusion] Among the three loading patterns, the loading pattern of loose-leaf stacking is most worthy of popularization and application.
基金Innovation Team Development Program of Ministry of Education of China (No. IRT0763)National Natural Science Foundation of China (No. 50205028).
文摘A new optimization method for the optimization of stacking of composite glass fiber laminates is developed. The fiber orientation and angle of the layers of the cylindrical shells are sought considering the buckling load. The proposed optimization algorithm applies both finite element analysis and the mode-pursuing sampling （MPS）method. The algorithms suggest the optimal stacking sequence for achieving the maximal buckling load. The procedure is implemented by integrating ANSYS and MATLAB. The stacking sequence designing for the symmetric angle-ply three-layered and five-layered composite cylinder shells is presented to illustrate the optimization process, respectively. Compared with the genetic algorithms, the proposed optimization method is much faster and efficient for composite staking sequence plan.
基金supported by the Chinas 863 Project (No.2015AA01A706)the National Science and Technology Major Project (No. 2016ZX03001017)+1 种基金the Science and Technology Program of Beijing (No. D161100001016002)the Science and Technology Cooperation Projects (No. 2015DFT10160B)
文摘Present mobile communication system suffers from the exponentially increased mobile traffic and research on the fifth generation(5G) mobile network architectures is ongoing to solve this problem. We investigate the feasibility of the proposals used for the network architecture evolution from 4G to 5G and first propose a compatible network architecture, which decouples the management plane, the control plane and the user plane based on NO Stack framework proposed in our previous study. We mainly design detail procedures including UE attachment, service request and dedicated bearer activation/deactivation for our proposal network architecture. Finally, we establish a clear analytical mode of the application and system states to evaluate the signaling loads of new architecture. Simulation results show that our proposal network architecture with elaborated signaling procedures has much impact on the total signaling loads of system and could obviously decrease the signaling overhead compared with LTE.
文摘The design of a seven-band stacked patch antenna for the C, X and Ku band is presented. The antenna consists of an H-slot loaded fed patch, stacked with dual U-slot loaded rectangular patch to generate the seven frequency bands. The total size of the antenna is 39.25 × 29.25 mm2. The multiband stacked patch antenna is studied and designed using IE3D simulator. For verification of simulation results, the antenna is analyzed by circuit theory concept. The simulated return loss, radiation pattern and gain are presented. Simulated results show that the antenna can be designed to cover the frequency bands from (4.24 GHz to 4.50 GHz, 5.02 GHz to 5.25 GHz) in C-band application, (7.84 GHz to 8.23 GHz) in X-band and (12.16 GHz to 12.35 GHz, 14.25 GHz to 14.76 GHz, 15.25 GHz to 15.51 GHz, 17.52 GHz to 17.86 GHz) in Ku band applications. The bandwidths of each band of the proposed antenna are 5.9%, 4.5%, 4.83%, 2.36%, 3.53%, 1.68% and 1.91%. Similarly the gains of the proposed band are 2.80 dBi, 4.39 dBi, 4.54 dBi, 10.26 dBi, 8.36 dBi and 9.91 dBi, respectively.
