Large-scale model testing of high-pressure grouting reinforcement for bedding slope with rapid-setting polyurethane

Bedding slope is a typical heterogeneous slope consisting of different soil/rock layers and is likely to slide along the weakest interface.Conventional slope protection methods for bedding slopes,such as retaining walls,stabilizing piles,and anchors,are time-consuming and labor-and energy-intensive.This study proposes an innovative polymer grout method to improve the bearing capacity and reduce the displacement of bedding slopes.A series of large-scale model tests were carried out to verify the effectiveness of polymer grout in protecting bedding slopes.Specifically,load-displacement relationships and failure patterns were analyzed for different testing slopes with various dosages of polymer.Results show the great potential of polymer grout in improving bearing capacity,reducing settlement,and protecting slopes from being crushed under shearing.The polymer-treated slopes remained structurally intact,while the untreated slope exhibited considerable damage when subjected to loads surpassing the bearing capacity.It is also found that polymer-cemented soils concentrate around the injection pipe,forming a fan-shaped sheet-like structure.This study proves the improvement of polymer grouting for bedding slope treatment and will contribute to the development of a fast method to protect bedding slopes from landslides.

The enlightenment of artificial intelligence large-scale model on the research of intelligent eye diagnosis in traditional Chinese medicine

Eye diagnosis is a method for inspecting systemic diseases and syndromes by observing the eyes.With the development of intelligent diagnosis in traditional Chinese medicine(TCM);artificial intelligence(AI)can improve the accuracy and efficiency of eye diagnosis.However;the research on intelligent eye diagnosis still faces many challenges;including the lack of standardized and precisely labeled data;multi-modal information analysis;and artificial in-telligence models for syndrome differentiation.The widespread application of AI models in medicine provides new insights and opportunities for the research of eye diagnosis intelli-gence.This study elaborates on the three key technologies of AI models in the intelligent ap-plication of TCM eye diagnosis;and explores the implications for the research of eye diagno-sis intelligence.First;a database concerning eye diagnosis was established based on self-su-pervised learning so as to solve the issues related to the lack of standardized and precisely la-beled data.Next;the cross-modal understanding and generation of deep neural network models to address the problem of lacking multi-modal information analysis.Last;the build-ing of data-driven models for eye diagnosis to tackle the issue of the absence of syndrome dif-ferentiation models.In summary;research on intelligent eye diagnosis has great potential to be applied the surge of AI model applications.

Construction of Risk Assessment Application Model of Epidemic Disease in Large-scale Pig Farms

The application model of epidemic disease assessment technology for Web-based large-scale pig farm was expounded from the identification of epidemic disease risk factors, construction of risk assessment model and development of risk assessment system. The assessed pig farm uploaded the epidemic disease risk data information through on-line answering evaluating questionnaire to get the immediate evaluation report. The model could enhance the risk communication between pig farm veterinarian, manager and veterinary experts to help farm system understand and find disease risk factors, assess and report the potential high risk items of the pig farm in the three systems of engineering epidemic disease prevention technology, biological safety and immune monitoring, and promote the improvement and perfection of epidemic disease prevention and control measures.

Long Short-Term Memory Recurrent Neural Network-Based Acoustic Model Using Connectionist Temporal Classification on a Large-Scale Training Corpus

A Long Short-Term Memory(LSTM) Recurrent Neural Network(RNN) has driven tremendous improvements on an acoustic model based on Gaussian Mixture Model(GMM). However, these models based on a hybrid method require a forced aligned Hidden Markov Model(HMM) state sequence obtained from the GMM-based acoustic model. Therefore, it requires a long computation time for training both the GMM-based acoustic model and a deep learning-based acoustic model. In order to solve this problem, an acoustic model using CTC algorithm is proposed. CTC algorithm does not require the GMM-based acoustic model because it does not use the forced aligned HMM state sequence. However, previous works on a LSTM RNN-based acoustic model using CTC used a small-scale training corpus. In this paper, the LSTM RNN-based acoustic model using CTC is trained on a large-scale training corpus and its performance is evaluated. The implemented acoustic model has a performance of 6.18% and 15.01% in terms of Word Error Rate(WER) for clean speech and noisy speech, respectively. This is similar to a performance of the acoustic model based on the hybrid method.

Validating the Runoff from the PRECIS Model Using a Large-Scale Routing Model

The streamflow over the Yellow River basin is simulated using the PRECIS （Providing REgional Climates for Impacts Studies） regional climate model driven by 15-year （1979-1993） ECMWF reanalysis data as the initial and lateral boundary conditions and an off-line large-scale routing model （LRM）. The LRM uses physical catchment and river channel information and allows streamflow to be predicted for large continental rivers with a 1°×1° spatial resolution. The results show that the PRECIS model can reproduce the general southeast to northwest gradient distribution of the precipitation over the Yellow River basin, The PRECIS- LRM model combination has the capability to simulate the seasonal and annual streamflow over the Yellow River basin. The simulated streamflow is generally coincident with the naturalized streamflow both in timing and in magnitude.

Comparison of Pile-Soil-Structure Interaction Modeling Techniques for A 10-MW Large-Scale Monopile Wind Turbine Model Under Wind and Wave Conditions

Considering the large diameter effect of piles,the influence of different pile-soil analysis methods on the design of monopile foundations for offshore wind turbines has become an urgent problem to be solved.Three different pile-soil models were used to study a large 10 MW monopile wind turbine.By modeling the three models in the SACS software,this paper analyzed the motion response of the overall structure under the conditions of wind and waves.According to the given working conditions,this paper concludes that under the condition of independent wind,the average value of the tower top x-displacement of the rigid connection method is the smalle st,and the standard deviation is the smallest under the condition of independent wave.The results obtained by the p-y curve method are the most conservative.

Modular Extremely Large-Scale Array Communication:Near-Field Modelling and Performance Analysis

This paper investigates the wireless communication with a novel architecture of antenna arrays,termed modular extremely large-scale array(XLarray),where array elements of an extremely large number/size are regularly mounted on a shared platform with both horizontally and vertically interlaced modules.Each module consists of a moderate/flexible number of array elements with the inter-element distance typically in the order of the signal wavelength,while different modules are separated by the relatively large inter-module distance for convenience of practical deployment.By accurately modelling the signal amplitudes and phases,as well as projected apertures across all modular elements,we analyse the near-field signal-to-noise ratio(SNR)performance for modular XL-array communications.Based on the non-uniform spherical wave(NUSW)modelling,the closed-form SNR expression is derived in terms of key system parameters,such as the overall modular array size,distances of adjacent modules along all dimensions,and the user's three-dimensional(3D)location.In addition,with the number of modules in different dimensions increasing infinitely,the asymptotic SNR scaling laws are revealed.Furthermore,we show that our proposed near-field modelling and performance analysis include the results for existing array architectures/modelling as special cases,e.g.,the collocated XL-array architecture,the uniform plane wave(UPW)based far-field modelling,and the modular extremely large-scale uniform linear array(XL-ULA)of onedimension.Extensive simulation results are presented to validate our findings.

Assessing cutter-rock interaction during TBM tunnelling in granite:Large-scale standing rotary cutting tests and 3D DEM simulations

The widespread utilisation of tunnel boring machines(TBMs)in underground construction engineering requires a detailed investigation of the cutter-rock interaction.In this paper,we conduct a series of largescale standing rotary cutting tests on granite in conjunction with high-fidelity numerical simulations based on a particle-type discrete element method(DEM)to explore the effects of key cutting parameters on the TBM cutter performance and the distribution of cutter-rock contact stresses.The assessment results of cutter performance obtained from the cutting tests and numerical simulations reveal similar dependencies on the key cutting parameters.More specifically,the normal and rolling forces exhibit a positive correlation with penetration but are slightly influenced by the cutting radius.In contrast,the side force decreases as the cutting radius increases.Additionally,the side force shows a positive relationship with the penetration for smaller cutting radii but tends to become negative as the cutting radius increases.The cutter's relative effectiveness in rock breaking is significantly impacted by the penetration but shows little dependency on the cutting radius.Consequently,an optimal penetration is identified,leading to a low boreability index and specific energy.A combined Hertz-Weibull function is developed to fit the cutter-rock contact stress distribution obtained in DEM simulations,whereby an improved CSM(Colorado School of Mines)model is proposed by replacing the original monotonic cutting force distribution with this combined Hertz-Weibull model.The proposed model outperforms the original CSM model as demonstrated by a comparison of the estimated cutting forces with those from the tests/simulations.The findings from this work that advance our understanding of TBM cutter performance have important implications for improving the efficiency and reliability of TBM tunnelling in granite.

Digital Application Objectives and Benefit Analysis of BIM Technology in Large-Scale Comprehensive Development Projects

This paper discusses the digital application and benefit analysis of building information model(BIM)technology in the large-scale comprehensive development project of the Guangxi headquarters base.The project covers a total area of 92,100 square meters,with a total construction area of 379,700 square meters,including a variety of architectural forms.Through three-dimensional modeling and simulation analysis,BIM technology significantly enhances the design quality and efficiency,shortens the design cycle by about 20%,and promotes the collaboration and integration of project management,improving the management efficiency by about 25%.During the construction phase,the collision detection and four-dimensional visual management functions of BIM technology have improved construction efficiency by about 15%and saved the cost by about 10%.In addition,BIM technology has promoted green building and sustainable development,achieved the dual improvement of technical and economic indicators and social and economic benefits,set an example for enterprises in digital transformation,and opened up new market businesses.

Advances of Model Order Reduction Research in Large-scale System Simulation

Model Order Reduction (MOR) plays more and more imp or tant role in complex system simulation, design and control recently. For example , for the large-size space structures, VLSI and MEMS (Micro-ElectroMechanical Systems) etc., in order to shorten the development cost, increase the system co ntrolling accuracy and reduce the complexity of controllers, the reduced order model must be constructed. Even in Virtual Reality (VR), the simulation and d isplay must be in real-time, the model order must be reduced too. The recent advances of MOR research are overviewed in the article. The MOR theor y and methods may be classified as Singular Value decomposition (SVD) based, the Krylov subspace based and others. The merits and demerits of the different meth ods are analyzed, and the existed problems are pointed out. Moreover, the applic ation’s fields are overviewed, and the potential applications are forecaste d. After the existed problems analyzed, the future work is described. There are som e problems in the traditional methods such as SVD and Krylov subspace, they are that it’s difficult to (1)guarantee the stability of the original system, (2) b e adaptive to nonlinear system, and (3) control the modeling accuracy. The f uture works may be solving the above problems on the foundation of the tradition al methods, and applying other methods such as wavelet or signal compression.

Porcine Breeding Management in a Large-scale Piggery with Microbial Fermentation Bed

[Objective] The behavior of eating, drinking, defecating and peeing of 1 500 pigs in a large-scale microbial fermentation bed-equipped piggery was observed. We hoped to find some simple indicators that could reflect the health status of swinery and to provide experience for the swinery performance management in large-scale microbial fermentation bed-equipped piggery. [Method] The body weight （BW）, daily BW gain, feed intake and other indicators of different-day-old pigs were recorded in details. Based on the recorded data, the models between BW, BW gain, average daily feed intake and feed/gain ratio and growth days （d） were established. In addition, the incidences of pox-like macula （dermatitis）, diarrhea （gastrointestinal disease）, cough （respiratory disease）, stiff pig （malnutrition）, conjunctivitis （eye disease） and foot inflection （trauma） among fattening pigs were also investigated. [Result] The BW range, average BW, daily BW gain, breeding days, daily feed intake range, average daily feed intake, staged feed intake, accumulated feed intake, feed/gain ratio and accumulated feed/gain ratio of different-day-old pigs were studied, respectively. Four dynamic models were established for the growth of pigs： （1） the BW （y）-age （x） mod- el： y=0.758 9x-19.883 （3=0.993 7）; （2） the BW gain （y）-age （x） model： y=1.039 5x05051 （F=0.885 4）; （3） the average daily feed intake （y）-age （x） model： y=0.023 5x-0.334 3 （F=0.991 7）; （4） the feed/gain ratio （y）-age （x） model： y=0.022x＋0.427 8 （P=0.988 5）. Based on these models, the corresponding theoretical growth value of pigs at different growth stage could be predicted. The main diseases occurred among the swinery in the large-scale microbial fermentation bed piggery included pox-like macula （dermatitis）, diarrhea （gastrointestinal disease）, cough （respiratory disease）, stiff pig （mal- nutrition）, conjunctivitis （eye disease） and foot inflection （trauma）. The deadly infec- tious diseases had been not found among the pigs. [Conclusion] When the actual BW, BW gain, average daily feed intake and feed/gain ratio were all lower than the theoretical values predicted by the models, the management should be enhanced. The average daily feed intake of 60 to 65-day-old pigs was lower than the theoretic value, indicating that the pigs could not adapt nicely to the fermentation bed at the very early stage. When the pigs grew up to 70 to 75 d old, the average daily feed intake was higher than the theoretical value, indicating that the pigs had adapted to the fermentation bed. In particularly, average daily feed intake of 75-day-old pigs was higher than the theoretical value by 21%. It was suggested the fermentation bed was conducive to the growth of pigs. Considering the occurrence of diseases among pigs, the overall incidence was relatively low. The incidence of each disease was all lower than 10% with little difficulty in treating. If the management of mattress was strength- ened, such as paying attention to feeding and keeping water clean, many diseases could heal by themselves.

The tectonic fracture modeling of an ultra-low permeability sandstone reservoir based on an outcrop analogy: A case study in the Wangyao Oilfield of Ordos Basin, China

Due to inherent limits of data acquisition and geophysical data resolution, there are large uncertainties in the characterization of subsurface fractures. However, outcrop analogies can provide qualitative and quantitative information on a large number of fractures, based on which the accuracy of subsurface fracture characterization can be improved. Here we take the tectonic fracture modeling of an ultra-low permeability sandstone reservoir based on an outcrop analogy, a case study of the Chang6t~ Formation of the Upper Triassic Yanchang Group of the Wangyao Oilfield in the Ordos Basin of China. An outcrop at the edge of the basin is a suitable analog for the reservoir, but the prerequisite is that they must have equivalent previous stress fields, similar final structural characteristics, relative timing and an identical depositional environment and diagenesis. The relationship among fracture density, rock type and bed thickness based on the outcrop is one of the most important fracture distribution models, and can be used to interpret fracture density in individual wells quantitatively. Fracture orientation, dip, geometry and scale, also should be described and measured in the outcrop, and can be used together with structure restoration and single well fracture density interpretation to guide fracture intensity prediction on bed surfaces and to constrain the construction of the 3D fracture geometry model of the subsurface reservoir. The application of the above principles shows the outcrop-based tectonic fracture models of the target ultra-low permeability sandstone reservoir are consistent with fractures inferred from microseismic interpretation and tracer tests. This illustrated that the fracture modeling based on the outcrop analogy is reliable and can reduce the uncertainty in stochastic fracture modeling.

High resolution facies architecture and digital outcrop modeling of the Sandakan formation sandstone reservoir, Borneo:Implications for reservoir characterization and flow simulation

Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone.

A Game-Theoretic Perspective on Resource Management for Large-Scale UAV Communication Networks

As a result of rapid development in electronics and communication technology,large-scale unmanned aerial vehicles(UAVs)are harnessed for various promising applications in a coordinated manner.Although it poses numerous advantages,resource management among various domains in large-scale UAV communication networks is the key challenge to be solved urgently.Specifically,due to the inherent requirements and future development trend,distributed resource management is suitable.In this article,we investigate the resource management problem for large-scale UAV communication networks from game-theoretic perspective which are exactly coincident with the distributed and autonomous manner.By exploring the inherent features,the distinctive challenges are discussed.Then,we explore several gametheoretic models that not only combat the challenges but also have broad application prospects.We provide the basics of each game-theoretic model and discuss the potential applications for resource management in large-scale UAV communication networks.Specifically,mean-field game,graphical game,Stackelberg game,coalition game and potential game are included.After that,we propose two innovative case studies to highlight the feasibility of such novel game-theoretic models.Finally,we give some future research directions to shed light on future opportunities and applications.

Temperature control for thermal treatment of aluminum alloy in a large-scale vertical quench furnace

The temperature control of the large-scale vertical quench furnace is very difficult due to its huge volume and complex thermal exchanges. To meet the technical requirement of the quenching process, a temperature control system which integrates temperature calibration and temperature uniformity control is developed for the thermal treatment of aluminum alloy workpieces in the large-scale vertical quench furnace. To obtain the aluminum alloy workpiece temperature, an air heat transfer model is newly established to describe the temperature gradient distribution so that the immeasurable workpiece temperature can be calibrated from the available thermocouple temperature. To satisfy the uniformity control of the furnace temperature, a second order partial differential equation(PDE) is derived to describe the thermal dynamics inside the vertical quench furnace. Based on the PDE, a decoupling matrix is constructed to solve the coupling issue and decouple the heating process into multiple independent heating subsystems. Then, using the expert control rule to find a compromise of temperature rising time and overshoot during the quenching process. The developed temperature control system has been successfully applied to a 31 m large-scale vertical quench furnace, and the industrial running results show the significant improvement of the temperature uniformity, lower overshoot and shortened processing time.

Large-scale two-dimensional nonlinear FE analysis on PGA amplification effect with depth and focusing effect of Fuzhou Basin

Based on the explicit finite element(FE) method and platform of ABAQUS,considering both the inhomogeneity of soils and concave-convex fluctuation of topography,a large-scale refined two-dimensional(2D) FE nonlinear analytical model for Fuzhou Basin was established.The peak ground motion acceleration(PGA) and focusing effect with depth were analyzed.Meanwhile,the results by wave propagation of one-dimensional(1D) layered medium equivalent linearization method were added for contrast.The results show that:1) PGA at different depths are obviously amplified compared to the input ground motion,amplification effect of both funnel-shaped depression and upheaval areas(based on the shape of bedrock surface) present especially remarkable.The 2D results indicate that the PGA displays a non-monotonic decreasing with depth and a greater focusing effect of some particular layers,while the 1D results turn out that the PGA decreases with depth,except that PGA at few particular depth increases abruptly; 2) To the funnel-shaped depression areas,PGA amplification effect above 8 m depth shows relatively larger,to the upheaval areas,PGA amplification effect from 15 m to 25 m depth seems more significant.However,the regularities of the PGA amplification effect could hardly be found in the rest areas; 3) It appears a higher regression rate of PGA amplification coefficient with depth when under a smaller input motion; 4) The frequency spectral characteristic of input motion has noticeable effects on PGA amplification tendency.

Numerical experimental study on the potential climatic impacts oflarge-scale wind farms in China

Wind energy has been rapidly developed in China during the past decades and the installed capacity has been the largest in the world. In the future, utilization of wind power is still expected to carry out in China mainly with a large-scale centralized layout. Here, we examine the potential climatic impacts of large-scale windfarms associated with deployment scale in China using numerical experiments, in which four deployment scenarios were designed. These four scenarios represented relatively small- (484 GW), medium- (2165 GW) and large-scale (3490 GW and 5412 GW) installed wind power capacities, respectively. Results showed that turbulent kinetic energy, wind velocity, and air temperature varied consistently within those windfarms with the largest changes in turbine hub heights. Moreover, the above relatively large- scale windfarms could induce regional wanning with a maximum of above 0.8 °C in North China. This regional warming may be linked to an anomalous circulation pattern with a negative pressure anomaly center in Northeast China and a positive pressure anomaly center in the middle and lower reaches of the Yangtze-Huaihe River Basin.

Large-scale functional connectivity predicts cognitive impairment related to type 2 diabetes mellitus

BACKGROUND Large-scale functional connectivity(LSFC)patterns in the brain have unique intrinsic characteristics.Abnormal LSFC patterns have been found in patients with dementia,as well as in those with mild cognitive impairment(MCI),and these patterns predicted their cognitive performance.It has been reported that patients with type 2 diabetes mellitus(T2DM)may develop MCI that could progress to dementia.We investigated whether we could adopt LSFC patterns as discriminative features to predict the cognitive function of patients with T2DM,using connectome-based predictive modeling(CPM)and a support vector machine.AIM To investigate the utility of LSFC for predicting cognitive impairment related to T2DM more accurately and reliably.METHODS Resting-state functional magnetic resonance images were derived from 42 patients with T2DM and 24 healthy controls.Cognitive function was assessed using the Montreal Cognitive Assessment(MoCA).Patients with T2DM were divided into two groups,according to the presence(T2DM-C;n=16)or absence(T2DM-NC;n=26)of MCI.Brain regions were marked using Harvard Oxford(HOA-112),automated anatomical labeling(AAL-116),and 264-region functional(Power-264)atlases.LSFC biomarkers for predicting MoCA scores were identified using a new CPM technique.Subsequently,we used a support vector machine based on LSFC patterns for among-group differentiation.The area under the receiver operating characteristic curve determined the appearance of the classification.RESULTS CPM could predict the MoCA scores in patients with T2DM(Pearson’s correlation coefficient between predicted and actual MoCA scores,r=0.32,P=0.0066[HOA-112 atlas];r=0.32,P=0.0078[AAL-116 atlas];r=0.42,P=0.0038[Power-264 atlas]),indicating that LSFC patterns represent cognition-level measures in these patients.Positive(anti-correlated)LSFC networks based on the Power-264 atlas showed the best predictive performance;moreover,we observed new brain regions of interest associated with T2DM-related cognition.The area under the receiver operating characteristic curve values(T2DM-NC group vs.T2DM-C group)were 0.65-0.70,with LSFC matrices based on HOA-112 and Power-264 atlases having the highest value(0.70).Most discriminative and attractive LSFCs were related to the default mode network,limbic system,and basal ganglia.CONCLUSION LSFC provides neuroimaging-based information that may be useful in detecting MCI early and accurately in patients with T2DM.

Impacts of a Large-scale Adaptive Blending Scheme for CMA-MESO on Regional Forecasts-A Case Study of Typhoon Haima

Large-scale atmospheric information plays an important role in the regional model for the forecasts of weather such as tropical cyclone(TC).However,it is difficult to be fully represented in regional models due to domain size and a lack of observation data,particularly at sea used in regional data assimilation.Blending analysis has been developed and implemented in regional models to reintroduce large-scale information from global model to regional analysis.Research of the impact of this large-scale blending scheme for the Global/Regional Assimilation and PrEdiction System(CMA-MESO)regional model on TC forecasting is limited and this study attempts to further progress by examining the adaptivity of the blending scheme using the two-dimensional Discrete Cosine Transform(2D-DCT)filter on the model forecast of Typhoon Haima over Shenzhen,China in 2016 and considering various cut-off wavelengths.Results showed that the error of the 24-hour typhoon track forecast can be reduced to less than 25 km by applying the scale-dependent blending scheme,indicating that the blending analysis is effectively able to minimise the large-scale bias for the initial fields.The improvement of the wind forecast is more evident for u-wind component according to the reduced root mean square errors(RMSEs)by comparing the experiments with and without blending analysis.Furthermore,the higher equitable threat score(ETS)provided implications that the precipitation prediction skills were increased in the 24h forecast by improving the representation of the large-scale feature in the CMA-MESO analysis.Furthermore,significant differences of the track error forecast were found by applying the blending analysis with different cut-off wavelengths from 400 km to 1200 km and the track error can be reduced less than by 10 km with 400 km cut-off wavelength in the first 6h forecast.It highlighted that the blending scheme with dynamic cut-off wavelengths adapted to the development of different TC systems is necessary in order to optimally introduce and ingest the large-scale information from global model to the regional model for improving the TC forecast.In this paper,the methods and data applied in this study will be firstly introduced,before discussion of the results regarding the performance of the blending analysis and its impacts on the wind and precipitation forecast correspondingly,followed by the discussion of the effects of different blending scheme on TC forecasts and the conclusion section.

3D geo-cellular static virtual outcrop model and its implications for reservoir petro-physical characteristics and heterogeneities

Geostatistical data plays a vibrant role for surface-based reservoir modeling through outcrop analogues,which is used to understand three-dimensional(3D)variability of petrophysical properties.The main purpose of this study is to improvise the surface-based 3D geo-modeling to demonstrate petrophysical characteristics and heterogeneities of Sandakan reservoirs,NW Borneo.We used point cloud data from Light Detection and Ranging(Li DAR)to build high-resolution virtual outcrop modeling(VOM)onto which we mapped 6 different lithofacies.Porosity and permeability of core plugs were measured to determine the average variance of petrophysical properties for each lithofacies.By utilizing the integration of VOMs analogues and petrophysical properties in Petrel^(TM),we demonstrated the distribution and associations of all lithofacies in pseudo wells that have inherent thin beds heterogeneities in 3D geocellular model.The results concluded that the heterogeneity of thin beds in lithofacies is dependent on porosity and permeability with input dataset.According to the final model,cross-bedding sandstone(CBS),hummocky cross-stratified sandstone(HCSS)and trough cross-bedding sandstone(TCBS)show good reservoir quality due to high porosity ranging from:25.6%to 20.4%and,19.3%-14.5%,and permeability ranging from:74.03 mD to 66.84 mD and,64.86 mD to 21.01 mD.In contrast,massive to weak laminae sandstone(MWLS)and bioturbated sandstone(BS)show fair to poor reservoir quality,caused baffling of surrounding mud sediments in the reservoir lithofacies.Results also revealed that Li DAR based VOM with petrophysical properties can significantly reduce the risk and minimize the cost of reservoir modeling in petroleum industry.