A rapid method of determination of BaP in various environmental samples,using synchronous fluorescence spectroscopy scanning in defined range of dual-wavelengths(SFDW)is described in this paper.
The systematical and scalable frameworks were provided for estimating the blocking probabilities under asynchronous traffic in optical burst switching(OBS) nodes with limited wavelength conversion capability(LWCC) . T...The systematical and scalable frameworks were provided for estimating the blocking probabilities under asynchronous traffic in optical burst switching(OBS) nodes with limited wavelength conversion capability(LWCC) . The relevant system architectures of limited range and limited number of wavelength converters(WCs) deployed by a share-per-fiber(SPF) mode were developed,and the novel theoretical analysis of node blocking probability was derived by combining the calculation of discouraged arrival rate in a birth-death process and two-dimensional Markov chain model of SPF. The simulation results on single node performance verify the accuracy and effectiveness of the analysis models. Under most scenarios,it is difficult to distinguish the plots generated by the analysis and simulation. As the conversion degree increases,the accuracy of the analysis model worsens slightly. However,the utmost error on burst loss probability is far less than one order of magnitude and hence,still allows for an accurate estimate. Some results are of actual significance to the construction of next-generation commercial OBS backbones.展开更多
In the traditional dual-frequency radar ranging system,there is a contradiction between ranging precision and ranging distance.So a tri-frequency ranging method is proposed.The principle of the tri-frequency ranging i...In the traditional dual-frequency radar ranging system,there is a contradiction between ranging precision and ranging distance.So a tri-frequency ranging method is proposed.The principle of the tri-frequency ranging is that the distance can be achieved by transmitting the three frequencies and then measuring the three phase difference and calculating the number of wavelength.What's more,range ambiguity will not occur within a certain distance.The experimental results show that,if the waveband is 0.47 ~0.57 m,the measurement of unambiguous distance of 25 ~500m can be realized.If the wavelength tolerance error is less than ± 10^(-7) and the phase error is less than ± 10^(-3),the precision of the distance ranging can reach 10^(-6).展开更多
Voluminous Early Cretaceous granitoids and associated large-scale ore deposits are distributed within the southern Great Xing'an Range(SGXR),NE China.Based on previously published geochronology and zircon Hf-isoto...Voluminous Early Cretaceous granitoids and associated large-scale ore deposits are distributed within the southern Great Xing'an Range(SGXR),NE China.Based on previously published geochronology and zircon Hf-isotope data,Hf isotope mapping is undertaken to improve our understanding of crustal architecture and its controls on ore deposits.The ore-related Early Cretaceous granitoids were sourced predominantly from juvenile crust,with the involvement of variable proportions of ancient crustal materials.The crustal architecture,as inferred from Hf isotopic contour maps,indicates two distinct Hf isotopic domains in SGXR,including(1)a higher-ε_(Hf)(+7 to+11)juvenile crust containing minor ancient crustal material,and(2)a lower-ε_(Hf)(+2 to+6)juvenile crust containing a greater proportion of ancient crustal materials.The Hf isotopic maps identify links between crustal architecture and regional metallogeny.Copper deposits and other deposits with significant Cu production are restricted mainly to the higher-ε_(Hf)juvenile crustal regions in the northern and eastern SGXR.Deposits dominated by other metals(e.g.,Mo,Sn,W,Pb,Zn,and Ag)occur mainly in the lower-ε_(Hf)juvenile crustal regions in the southern and western SGXR.Interaction between juvenile crust-derived melts and ancient crustal components played an important role on the distribution of various ore metals.展开更多
Purpose – Straightness measurement of rail weld joint is of essential importance to railway maintenance. Dueto the lack of efficient measurement equipment, there has been limited in-depth research on rail weld joint ...Purpose – Straightness measurement of rail weld joint is of essential importance to railway maintenance. Dueto the lack of efficient measurement equipment, there has been limited in-depth research on rail weld joint with a5-m wavelength range, leaving a significant knowledge gap in this field.Design/methodology/approach – In this study, the authors used the well-established inertial referencemethod (IR-method), and the state-of-the-art multi-point chord reference method (MCR-method). Two methodshave been applied in different types of rail straightness measurement trollies, respectively. These instrumentswere tested in a high-speed rail section within a certain region of China. The test results were ultimatelyvalidated through using traditional straightedge and feeler gauge methods as reference data to evaluate the railweld joint straightness within the 5-m wavelength range.Findings – The research reveals that IR-method and MCR-method produce reasonably similar measurementresults for wavelengths below 1 m. However, MCR-method outperforms IR-method in terms of accuracy forwavelengths exceeding 3 m. Furthermore, it was observed that IR-method, while operating at a slower speed,carries the risk of derailing and is incapable of detecting rail weld joints and low joints within the track.Originality/value – The research compare two methods’ measurement effects in a longer wavelength rangeand demonstrate the superiority of MCR-method.展开更多
文摘A rapid method of determination of BaP in various environmental samples,using synchronous fluorescence spectroscopy scanning in defined range of dual-wavelengths(SFDW)is described in this paper.
基金Project(60632010) supported by the National Natural Science Foundation of China
文摘The systematical and scalable frameworks were provided for estimating the blocking probabilities under asynchronous traffic in optical burst switching(OBS) nodes with limited wavelength conversion capability(LWCC) . The relevant system architectures of limited range and limited number of wavelength converters(WCs) deployed by a share-per-fiber(SPF) mode were developed,and the novel theoretical analysis of node blocking probability was derived by combining the calculation of discouraged arrival rate in a birth-death process and two-dimensional Markov chain model of SPF. The simulation results on single node performance verify the accuracy and effectiveness of the analysis models. Under most scenarios,it is difficult to distinguish the plots generated by the analysis and simulation. As the conversion degree increases,the accuracy of the analysis model worsens slightly. However,the utmost error on burst loss probability is far less than one order of magnitude and hence,still allows for an accurate estimate. Some results are of actual significance to the construction of next-generation commercial OBS backbones.
基金Supported by the National Natural Science Foundation of China(No.61107052)the National Natural Science Foundation of Tianjing(No.11JCYBJC00100)
文摘In the traditional dual-frequency radar ranging system,there is a contradiction between ranging precision and ranging distance.So a tri-frequency ranging method is proposed.The principle of the tri-frequency ranging is that the distance can be achieved by transmitting the three frequencies and then measuring the three phase difference and calculating the number of wavelength.What's more,range ambiguity will not occur within a certain distance.The experimental results show that,if the waveband is 0.47 ~0.57 m,the measurement of unambiguous distance of 25 ~500m can be realized.If the wavelength tolerance error is less than ± 10^(-7) and the phase error is less than ± 10^(-3),the precision of the distance ranging can reach 10^(-6).
基金funded by the National Natural Science Foundation of China(No.41903043)China Postdoctoral Science Foundation(No.2018M642948)Program of China Geological Survey Bureau:1:50000 Regional Geological Survey of Tubuqin,Bayar Tuhushuo,Hadayingzi,Alahada,and Yidanjialaga in Inner Mongolia(No.DD20160048-15)。
文摘Voluminous Early Cretaceous granitoids and associated large-scale ore deposits are distributed within the southern Great Xing'an Range(SGXR),NE China.Based on previously published geochronology and zircon Hf-isotope data,Hf isotope mapping is undertaken to improve our understanding of crustal architecture and its controls on ore deposits.The ore-related Early Cretaceous granitoids were sourced predominantly from juvenile crust,with the involvement of variable proportions of ancient crustal materials.The crustal architecture,as inferred from Hf isotopic contour maps,indicates two distinct Hf isotopic domains in SGXR,including(1)a higher-ε_(Hf)(+7 to+11)juvenile crust containing minor ancient crustal material,and(2)a lower-ε_(Hf)(+2 to+6)juvenile crust containing a greater proportion of ancient crustal materials.The Hf isotopic maps identify links between crustal architecture and regional metallogeny.Copper deposits and other deposits with significant Cu production are restricted mainly to the higher-ε_(Hf)juvenile crustal regions in the northern and eastern SGXR.Deposits dominated by other metals(e.g.,Mo,Sn,W,Pb,Zn,and Ag)occur mainly in the lower-ε_(Hf)juvenile crustal regions in the southern and western SGXR.Interaction between juvenile crust-derived melts and ancient crustal components played an important role on the distribution of various ore metals.
文摘Purpose – Straightness measurement of rail weld joint is of essential importance to railway maintenance. Dueto the lack of efficient measurement equipment, there has been limited in-depth research on rail weld joint with a5-m wavelength range, leaving a significant knowledge gap in this field.Design/methodology/approach – In this study, the authors used the well-established inertial referencemethod (IR-method), and the state-of-the-art multi-point chord reference method (MCR-method). Two methodshave been applied in different types of rail straightness measurement trollies, respectively. These instrumentswere tested in a high-speed rail section within a certain region of China. The test results were ultimatelyvalidated through using traditional straightedge and feeler gauge methods as reference data to evaluate the railweld joint straightness within the 5-m wavelength range.Findings – The research reveals that IR-method and MCR-method produce reasonably similar measurementresults for wavelengths below 1 m. However, MCR-method outperforms IR-method in terms of accuracy forwavelengths exceeding 3 m. Furthermore, it was observed that IR-method, while operating at a slower speed,carries the risk of derailing and is incapable of detecting rail weld joints and low joints within the track.Originality/value – The research compare two methods’ measurement effects in a longer wavelength rangeand demonstrate the superiority of MCR-method.
基金supported by the Natural Science Foundation of China(61377061)the Public Project of Zhejiang Province(2014C31146)+1 种基金the Young Leaders of the academic climbing project of the Education Department of Zhejiang Province(pd2013092)the Natural Science Foundation of Ningbo city(2014A610124)
