Difference between grid connections of large-scale wind power and conventional synchronous generation

In China, regions with abundant wind energy resources are generally located at the end of power grids. The power grid architecture in these regions is typically not sufficiently strong, and the energy structure is relatively simple. Thus, connecting large-capacity wind power units complicates the peak load regulation and stable operation of the power grids in these regions. Most wind turbines use power electronic converter technology, which affects the safety and stability of the power grid differently compared with conventional synchronous generators. Furthermore, fluctuations in wind power cause fluctuations in the output of wind farms, making it difficult to create and implement suitable power generation plans for wind farms. The generation technology and grid connection scheme for wind power and conventional thermal power generation differ considerably. Moreover, the active and reactive power control abilities of wind turbines are weaker than those of thermal power units, necessitating additional equipment to control wind turbines. Hence, to address the aforementioned issues with large-scale wind power generation, this study analyzes the differences between the grid connection and collection strategies for wind power bases and thermal power plants. Based on this analysis, the differences in the power control modes of wind power and thermal power are further investigated. Finally, the stability of different control modes is analyzed through simulation. The findings can be beneficial for the planning and development of large-scale wind power generation farms.

Numerical experimental study on the potential climatic impacts oflarge-scale wind farms in China

Wind energy has been rapidly developed in China during the past decades and the installed capacity has been the largest in the world. In the future, utilization of wind power is still expected to carry out in China mainly with a large-scale centralized layout. Here, we examine the potential climatic impacts of large-scale windfarms associated with deployment scale in China using numerical experiments, in which four deployment scenarios were designed. These four scenarios represented relatively small- (484 GW), medium- (2165 GW) and large-scale (3490 GW and 5412 GW) installed wind power capacities, respectively. Results showed that turbulent kinetic energy, wind velocity, and air temperature varied consistently within those windfarms with the largest changes in turbine hub heights. Moreover, the above relatively large- scale windfarms could induce regional wanning with a maximum of above 0.8 °C in North China. This regional warming may be linked to an anomalous circulation pattern with a negative pressure anomaly center in Northeast China and a positive pressure anomaly center in the middle and lower reaches of the Yangtze-Huaihe River Basin.

Videometric research on deformation measurement of large-scale wind turbine blades

Utilization of wind energy is a promising way to generate power,and wind turbine blades play a key role in collecting the wind energy effectively.This paper attempts to measure the deformation parameter of wind turbine blades in mechanics experiments using a videometric method. In view that the blades experience small buckling deformation and large integral deformation simultaneously, we proposed a parallel network measurement(PNM) method including the key techniques such as camera network construction,camera calibration,distortion correction,the semi-automatic high-precision extraction of targets,coordinate systems unification,and bundle adjustment,etc. The relatively convenient construction method of the measuring system can provide an abundant measuring content,a wide measuring range and post processing.The experimental results show that the accuracy of the integral deformation measurement is higher than 0.5 mm and that of the buckling deformation measurement higher than 0.1mm.

Determination of the Circulation for a Large-Scale Wind Turbine Blade Using Computational Fluid Dynamics

The determination of the circulation for wind turbine blades is an important problem in engineering.In the present study,we develop a specific approach to evaluate the integral that represents mathematically the circulation.First the potentialities of the method are assessed using a two-dimensional NACA64_A17 airfoil as a testbed and evaluating the influence of different integration paths and angles of attack on the circulation value.Then the method is applied to blades with different relative heights in order to provide useful reference data to be used for the optimization and reverse design of wind turbine blades.As shown by the results,the integral value changes with the integral path,and an“optimal circle radius”exists.We calibrate the integral value by comparing its value with the lift formula.In this was we succeed in showing that there is a certain error when the radius is too small.However,the error can increase rapidly when the radius is too large.When the radius of the circle is 1–6 times the chord length,the error of all integral values is less than 5%.The optimal radius varies with the angle of attack.

Transient Stability Study of Power System with Large-Scale Wind Farm Integration

Large-scale wind power integration has become the current development trend of the power system. Large-scale wind power integration can change the original structure and characteristics of the system. Thus, it’s necessary to analyse the transient stability of power system which contains wind power, and to study the controlling strategy for improving the transient stability of power system. Based on EEAC, this paper studies the transient stability of the power system which contains wind power system theoretically, proposes the calculation method for accelerating area, decelerating area and margin, and illustrates the impact of wind power integration on the transient stability with power angle curve. Furthermore, this paper studies the modeling and simulation, and the experimental results prove the correctness of the theories.

Impacts of Large-scale Wind Power Grid Integration on Relay Protection and Countermeasures

Several large-scale wind turbine tripping accidents occurred in Jiuquan wind power base in 2011.According to the on-site survey and analysis of these accidents related to relay protection,causes were found to be the collection system defects and low correct operation rate of small current grounded line selectors of the unearthed neutral point collection system.By referring to both the characteristics of Jiuquan wind power base and arrangement of relay protection,the short-circuit features of wind power and its impacts on relay protection are analyzed.The collection system and the retrofit of the small current grounded line selector are improved by specific countermeasures.Finally,further research subjects are put forward.

Model Predictive Yaw Control Using Fuzzy-Deduced Weighting Factor for Large-Scale Wind Turbines

Yaw control system plays an important role in helping large-scale horizontal wind turbines capture the wind energy.To track the stochastic and fast-changing wind direction,the nacelle is rotated by the yaw control system.Therein,a difficulty consists in the variation speed of the wind direction much faster than the rotation speed of the nacelle.To deal with this difficulty,model predictive control has been recently proposed in the literature,in which the previewed wind direction is employed into the predictive model,and the estimated captured energy and yaw actuator usage are two contradictive objectives.Since the performance of the model predictive control strat-egy relies largely on the weighting factor that is designed to balance the two objectives,the weighting factor should be carefully selected.In this study,a fuzzy-deduced scheme is proposed to derive the weighting factor of the mod-el predictive yaw control.For the proposed fuzzy-deduced strategy,the variation degree and the increment of the wind direction during the predictive horizon are used as the inputs,and the weighting factor is the output,which is dynamically adjusted.The proposed model predictive yaw control is demonstrated by some simulations using real wind data and its performance is compared with the conventional model predictive control with thefixed weighting factor.Comparison results confirm the outweighing performance of the proposed control strategy over the conventional one.

Effects of Large-Scale Wind Energy Base on Power Grid Company

The first stage project of Jiuquan wind energy base with 5.5-GW installed capacity is about to be completed. However, there exist several technical issues such as power transfer capability, electricity accommodation, frequency control and peak load regulation as well as system stability. In addition, the high capital cost and operation cost of the supporting transmission project invested and constructed by the Gansu Provincial Power Company will definitely have significant impacts on the management and economic profit of the Company. Through analysis of the construction and operation cost changes resulting from the wind power collection and delivery project, the author carried out research into the effects of developing large-scale wind power base on the management and economic benefits of power grid enterprises and proposed corresponding suggestions to make the related policies perfect.

Protection of Large-scale Wind Power Integration

More and more large capacity wind power will be integrated into power system in the future,and certain technical challenges will emerge due to the fluctuation characteristics of wind power and the complex control of power electronic devices inside the wind turbines(e.g.,low voltage ride through(LVRT)).By comparing a wind power integration grid with a hydropower integration grid,the special transient phenomena caused by the wind power integration is studied and simulation results are presented.Furthermore,the potential impacts on the traditional protection are discussed.Results show that the special transient phenomena can decrease the sensitivity,reliability and operation speed of conventional protections.

Accident of Large-scale Wind Turbines Disconnecting from Power Grid and Its Protection

There were many accidents of large-scale wind turbines disconnecting from power grid in 2011.As singlephase-to-ground fault cannot be correctly detected,single-phase-to-ground fault evolved to phase-to-phase fault.Phase-to-phase fault was isolated slowly,thus leading to low voltage.And wind turbines without enough low voltage ride-through capacity had to be disconnected from the grid.After some wind turbines being disconnected from the grid,overvoltage caused by reactive power surplus made more wind turbines disconnect from the grid.Based on the accident analysis,this paper presents solutions to above problems,including travelling waves based single-phase-to-ground protection,adaptive low voltage protection,integrated protection and control,and high impedance fault detection.The solutions lay foundations in theory and technology to prevent large-scale wind turbines disconnecting from the operating power grid.

Risk-averse Robust Interval Economic Dispatch for Power Systems with Large-scale Wind Power Integration

This paper presents a robust interval economic dispatch(RIED)model for power systems with large-scale wind power integration.Differing from existing interval optimization(IO)approaches that merely rely on the upper and lower boundaries of random variables,the distribution information retained in the historical data is introduced to the IO method in this paper.Based on the available probability distribution function(PDF),wind power curtailment and load shedding are quantified as the operational risk and incorporated into the decision-making process.In this model,we need not rely on the forecasted value of wind power,which is randomly fluctuating and quite unpredictable.Furthermore,when the PDFs of wind power are taken into account,the resulting dispatch solution makes a good tradeoff between the generation cost and the operational risk.Finally,the RIED model yields an optimal dispatch solution for thermal units and the allowable intervals of wind power for the wind farms,which efficiently mitigates the uncertainty in wind power generation and provides more practical suggestions for system operators.Simulation studies are conducted on a modified IEEE-118 bus system and the results verify the effectiveness of the proposed RIED model.

A Two-Layer Encoding Learning Swarm Optimizer Based on Frequent Itemsets for Sparse Large-Scale Multi-Objective Optimization

Traditional large-scale multi-objective optimization algorithms(LSMOEAs)encounter difficulties when dealing with sparse large-scale multi-objective optimization problems(SLM-OPs)where most decision variables are zero.As a result,many algorithms use a two-layer encoding approach to optimize binary variable Mask and real variable Dec separately.Nevertheless,existing optimizers often focus on locating non-zero variable posi-tions to optimize the binary variables Mask.However,approxi-mating the sparse distribution of real Pareto optimal solutions does not necessarily mean that the objective function is optimized.In data mining,it is common to mine frequent itemsets appear-ing together in a dataset to reveal the correlation between data.Inspired by this,we propose a novel two-layer encoding learning swarm optimizer based on frequent itemsets(TELSO)to address these SLMOPs.TELSO mined the frequent terms of multiple particles with better target values to find mask combinations that can obtain better objective values for fast convergence.Experi-mental results on five real-world problems and eight benchmark sets demonstrate that TELSO outperforms existing state-of-the-art sparse large-scale multi-objective evolutionary algorithms(SLMOEAs)in terms of performance and convergence speed.

Assessment of Wet Season Precipitation in the Central United States by the Regional Climate Simulation of the WRFG Member in NARCCAP and Its Relationship with Large-Scale Circulation Biases

Assessment of past-climate simulations of regional climate models(RCMs)is important for understanding the reliability of RCMs when used to project future regional climate.Here,we assess the performance and discuss possible causes of biases in a WRF-based RCM with a grid spacing of 50 km,named WRFG,from the North American Regional Climate Change Assessment Program(NARCCAP)in simulating wet season precipitation over the Central United States for a period when observational data are available.The RCM reproduces key features of the precipitation distribution characteristics during late spring to early summer,although it tends to underestimate the magnitude of precipitation.This dry bias is partially due to the model’s lack of skill in simulating nocturnal precipitation related to the lack of eastward propagating convective systems in the simulation.Inaccuracy in reproducing large-scale circulation and environmental conditions is another contributing factor.The too weak simulated pressure gradient between the Rocky Mountains and the Gulf of Mexico results in weaker southerly winds in between,leading to a reduction of warm moist air transport from the Gulf to the Central Great Plains.The simulated low-level horizontal convergence fields are less favorable for upward motion than in the NARR and hence,for the development of moist convection as well.Therefore,a careful examination of an RCM’s deficiencies and the identification of the source of errors are important when using the RCM to project precipitation changes in future climate scenarios.

Comparison of Pile-Soil-Structure Interaction Modeling Techniques for A 10-MW Large-Scale Monopile Wind Turbine Model Under Wind and Wave Conditions

Considering the large diameter effect of piles,the influence of different pile-soil analysis methods on the design of monopile foundations for offshore wind turbines has become an urgent problem to be solved.Three different pile-soil models were used to study a large 10 MW monopile wind turbine.By modeling the three models in the SACS software,this paper analyzed the motion response of the overall structure under the conditions of wind and waves.According to the given working conditions,this paper concludes that under the condition of independent wind,the average value of the tower top x-displacement of the rigid connection method is the smalle st,and the standard deviation is the smallest under the condition of independent wave.The results obtained by the p-y curve method are the most conservative.

Enhancing Evolutionary Algorithms With Pattern Mining for Sparse Large-Scale Multi-Objective Optimization Problems

Sparse large-scale multi-objective optimization problems(SLMOPs)are common in science and engineering.However,the large-scale problem represents the high dimensionality of the decision space,requiring algorithms to traverse vast expanse with limited computational resources.Furthermore,in the context of sparse,most variables in Pareto optimal solutions are zero,making it difficult for algorithms to identify non-zero variables efficiently.This paper is dedicated to addressing the challenges posed by SLMOPs.To start,we introduce innovative objective functions customized to mine maximum and minimum candidate sets.This substantial enhancement dramatically improves the efficacy of frequent pattern mining.In this way,selecting candidate sets is no longer based on the quantity of nonzero variables they contain but on a higher proportion of nonzero variables within specific dimensions.Additionally,we unveil a novel approach to association rule mining,which delves into the intricate relationships between non-zero variables.This novel methodology aids in identifying sparse distributions that can potentially expedite reductions in the objective function value.We extensively tested our algorithm across eight benchmark problems and four real-world SLMOPs.The results demonstrate that our approach achieves competitive solutions across various challenges.

Large-scale model testing of high-pressure grouting reinforcement for bedding slope with rapid-setting polyurethane

Bedding slope is a typical heterogeneous slope consisting of different soil/rock layers and is likely to slide along the weakest interface.Conventional slope protection methods for bedding slopes,such as retaining walls,stabilizing piles,and anchors,are time-consuming and labor-and energy-intensive.This study proposes an innovative polymer grout method to improve the bearing capacity and reduce the displacement of bedding slopes.A series of large-scale model tests were carried out to verify the effectiveness of polymer grout in protecting bedding slopes.Specifically,load-displacement relationships and failure patterns were analyzed for different testing slopes with various dosages of polymer.Results show the great potential of polymer grout in improving bearing capacity,reducing settlement,and protecting slopes from being crushed under shearing.The polymer-treated slopes remained structurally intact,while the untreated slope exhibited considerable damage when subjected to loads surpassing the bearing capacity.It is also found that polymer-cemented soils concentrate around the injection pipe,forming a fan-shaped sheet-like structure.This study proves the improvement of polymer grouting for bedding slope treatment and will contribute to the development of a fast method to protect bedding slopes from landslides.

Assessment of large-scale multiple forest disturbance susceptibilities with AutoML framework: an Izmir Regional Forest Directorate case

Disturbances such as forest fires,intense winds,and insect damage exert strong impacts on forest ecosystems by shaping their structure and growth dynamics,with contributions from climate change.Consequently,there is a need for reliable and operational methods to monitor and map these disturbances for the development of suitable management strategies.While susceptibility assessment using machine learning methods has increased,most studies have focused on a single disturbance.Moreover,there has been limited exploration of the use of“Automated Machine Learning(AutoML)”in the literature.In this study,susceptibility assessment for multiple forest disturbances(fires,insect damage,and wind damage)was conducted using the PyCaret AutoML framework in the Izmir Regional Forest Directorate(RFD)in Turkey.The AutoML framework compared 14 machine learning algorithms and ranked the best models based on AUC(area under the curve)values.The extra tree classifier(ET)algorithm was selected for modeling the susceptibility of each disturbance due to its good performance(AUC values>0.98).The study evaluated susceptibilities for both individual and multiple disturbances,creating a total of four susceptibility maps using fifteen driving factors in the assessment.According to the results,82.5%of forested areas in the Izmir RFD are susceptible to multiple disturbances at high and very high levels.Additionally,a potential forest disturbances map was created,revealing that 15.6%of forested areas in the Izmir RFD may experience no damage from the disturbances considered,while 54.2%could face damage from all three disturbances.The SHAP(Shapley Additive exPlanations)methodology was applied to evaluate the importance of features on prediction and the nonlinear relationship between explanatory features and susceptibility to disturbance.

Online identification and extraction method of regional large-scale adjustable load-aggregation characteristics

This article introduces the concept of load aggregation,which involves a comprehensive analysis of loads to acquire their external characteristics for the purpose of modeling and analyzing power systems.The online identification method is a computer-involved approach for data collection,processing,and system identification,commonly used for adaptive control and prediction.This paper proposes a method for dynamically aggregating large-scale adjustable loads to support high proportions of new energy integration,aiming to study the aggregation characteristics of regional large-scale adjustable loads using online identification techniques and feature extraction methods.The experiment selected 300 central air conditioners as the research subject and analyzed their regulation characteristics,economic efficiency,and comfort.The experimental results show that as the adjustment time of the air conditioner increases from 5 minutes to 35 minutes,the stable adjustment quantity during the adjustment period decreases from 28.46 to 3.57,indicating that air conditioning loads can be controlled over a long period and have better adjustment effects in the short term.Overall,the experimental results of this paper demonstrate that analyzing the aggregation characteristics of regional large-scale adjustable loads using online identification techniques and feature extraction algorithms is effective.

A semantic vector map-based approach for aircraft positioning in GNSS/GPS denied large-scale environment

Accurate positioning is one of the essential requirements for numerous applications of remote sensing data,especially in the event of a noisy or unreliable satellite signal.Toward this end,we present a novel framework for aircraft geo-localization in a large range that only requires a downward-facing monocular camera,an altimeter,a compass,and an open-source Vector Map(VMAP).The algorithm combines the matching and particle filter methods.Shape vector and correlation between two building contour vectors are defined,and a coarse-to-fine building vector matching(CFBVM)method is proposed in the matching stage,for which the original matching results are described by the Gaussian mixture model(GMM).Subsequently,an improved resampling strategy is designed to reduce computing expenses with a huge number of initial particles,and a credibility indicator is designed to avoid location mistakes in the particle filter stage.An experimental evaluation of the approach based on flight data is provided.On a flight at a height of 0.2 km over a flight distance of 2 km,the aircraft is geo-localized in a reference map of 11,025 km~2using 0.09 km~2aerial images without any prior information.The absolute localization error is less than 10 m.

Large-Scale Multi-Objective Optimization Algorithm Based on Weighted Overlapping Grouping of Decision Variables

The large-scale multi-objective optimization algorithm(LSMOA),based on the grouping of decision variables,is an advanced method for handling high-dimensional decision variables.However,in practical problems,the interaction among decision variables is intricate,leading to large group sizes and suboptimal optimization effects;hence a large-scale multi-objective optimization algorithm based on weighted overlapping grouping of decision variables(MOEAWOD)is proposed in this paper.Initially,the decision variables are perturbed and categorized into convergence and diversity variables;subsequently,the convergence variables are subdivided into groups based on the interactions among different decision variables.If the size of a group surpasses the set threshold,that group undergoes a process of weighting and overlapping grouping.Specifically,the interaction strength is evaluated based on the interaction frequency and number of objectives among various decision variables.The decision variable with the highest interaction in the group is identified and disregarded,and the remaining variables are then reclassified into subgroups.Finally,the decision variable with the strongest interaction is added to each subgroup.MOEAWOD minimizes the interactivity between different groups and maximizes the interactivity of decision variables within groups,which contributed to the optimized direction of convergence and diversity exploration with different groups.MOEAWOD was subjected to testing on 18 benchmark large-scale optimization problems,and the experimental results demonstrate the effectiveness of our methods.Compared with the other algorithms,our method is still at an advantage.