Macrosegregation is a critical factor that limits the mechanical properties of materials.The impact of equiaxed crystal sedimentation on macrosegregation has been extensively studied,as it plays a significant role in ...Macrosegregation is a critical factor that limits the mechanical properties of materials.The impact of equiaxed crystal sedimentation on macrosegregation has been extensively studied,as it plays a significant role in determining the distribution of alloying elements and impurities within a material.To improve macrosegregation in steel connecting shafts,a multiphase solidification model that couples melt flow,heat transfer,microstructure evolution,and solute transport was established based on the volume-averaged Eulerian-Eulerian approach.In this model,the effects of liquid phase,equiaxed crystals,columnar dendrites,and columnar-to-equiaxed transition(CET)during solidification and evolution of microstructure can be considered simultaneously.The sedimentation of equiaxed crystals contributes to negative macrosegregation,where regions between columnar dendrites and equiaxed crystals undergo significant A-type positive macrosegregation due to the CET.Additionally,noticeable positive macrosegregation occurs in the area of final solidification in the ingot.The improvement in macrosegregation is beneficial for enhancing the mechanical properties of connecting shafts.To mitigate the thermal convection of molten steel resulting from excessive superheating,reducing the superheating during casting without employing external fields or altering the design of the ingot mold is indeed an effective approach to control macrosegregation.展开更多
The quality of semi-products of platinum metals and alloys, produced by way of plastic working, essentially depends on or, in many cases, is completely determined by the quality of ingots. Plastic working does not mak...The quality of semi-products of platinum metals and alloys, produced by way of plastic working, essentially depends on or, in many cases, is completely determined by the quality of ingots. Plastic working does not make it possible to eliminate or localize metallurgical defects. In many cases it promotes the occurence thereof. Low-rate casting with directional crystallization can ensure the production of dense ingots free of non-metallic inclusions, shrinkage and gas weakness, with observance of certain temperature/rate modes. After comparative tests of vertical and horizontal molds, preference has been given to horizontal water-cooled molds, allowing to cast all alloys in the conditions of directional crystallization.展开更多
基金supported by the National Key Research and Development Program of China(2021YFB3702005)the National Natural Science Foundation of China(52304352)+3 种基金the Central Government Guides Local Science and Technology Development Fund Projects(2023JH6/100100046)2022"Chunhui Program"Collaborative Scientific Research Project(202200042)the Doctoral Start-up Foundation of Liaoning Province(2023-BS-182)the Technology Development Project of State Key Laboratory of Metal Material for Marine Equipment and Application[HGSKL-USTLN(2022)01].
文摘Macrosegregation is a critical factor that limits the mechanical properties of materials.The impact of equiaxed crystal sedimentation on macrosegregation has been extensively studied,as it plays a significant role in determining the distribution of alloying elements and impurities within a material.To improve macrosegregation in steel connecting shafts,a multiphase solidification model that couples melt flow,heat transfer,microstructure evolution,and solute transport was established based on the volume-averaged Eulerian-Eulerian approach.In this model,the effects of liquid phase,equiaxed crystals,columnar dendrites,and columnar-to-equiaxed transition(CET)during solidification and evolution of microstructure can be considered simultaneously.The sedimentation of equiaxed crystals contributes to negative macrosegregation,where regions between columnar dendrites and equiaxed crystals undergo significant A-type positive macrosegregation due to the CET.Additionally,noticeable positive macrosegregation occurs in the area of final solidification in the ingot.The improvement in macrosegregation is beneficial for enhancing the mechanical properties of connecting shafts.To mitigate the thermal convection of molten steel resulting from excessive superheating,reducing the superheating during casting without employing external fields or altering the design of the ingot mold is indeed an effective approach to control macrosegregation.
文摘The quality of semi-products of platinum metals and alloys, produced by way of plastic working, essentially depends on or, in many cases, is completely determined by the quality of ingots. Plastic working does not make it possible to eliminate or localize metallurgical defects. In many cases it promotes the occurence thereof. Low-rate casting with directional crystallization can ensure the production of dense ingots free of non-metallic inclusions, shrinkage and gas weakness, with observance of certain temperature/rate modes. After comparative tests of vertical and horizontal molds, preference has been given to horizontal water-cooled molds, allowing to cast all alloys in the conditions of directional crystallization.
