Four distributed feedback laser array integrated with multimode-interference and semiconductor optical amplifier

Monolithic integration of four 1.55-μm-range InGaAsP/InP distributed feedback （DFB） lasers using varied ridge width with a 4 x 1-multimode-interference （MMI） optical combiner and a semiconductor optical amplifier （SOA） is demon- strated. The average output power and the threshold current are 1.8 mW and 35 mA, respectively, when the injection current of the SOA is 100 mA, with a side mode suppression ratio （SMSR） exceeding 40 dB. The four channels have a 1-nm average channel spacing and can operate separately or simultaneously.

Coupled-ridge waveguide quantum cascade laser array lasing at λ~5μm

In this work,we demonstrated high-power quantum cascade laser(QCL)arrays lasing at λ~5μm by employing an optimized coupled-ridge waveguide(CRW)structure.Five-element QCL arrays were simulated and fabricated through a two-step etching method to extend the CRW structure to a mid-wave infrared regime.A lateral far-field with the main peak near a diffraction-limited intensity curve of about 10°was observed by properly designing a geometric shape of the ridges and interspaces.By introducing a buried 2nd-order distributed feedback(DFB)grating,substrate emission with a radiation power above 1 W at 25℃ is achieved.Single longitudinal mode operation is obtained by changing the temperature of the heatsink with a good linear wavelength tuning coefficient of -0.2 cm^(-1)/K.

Simulation of Far-Field Properties of Coherent Vertical Cavity Surface Emitting Laser Array

Far-field properties dependent on array scale, separation, element width and emitted wavelength are system atically analyzed theoretically and experimentally. An array model based on the finite-difference method is established to simulate the far-field profile of the coherent arrays. Some important conclusions are obtained. To achieve a higher quality beam, it is necessary to decrease separation between elements, or to increase the element width. Higher brightness can be achieved in the array with larger scale. Emitted wavelength also has an influence on the far-field profile. These analyses can be extended to the future design of coherent vertical cavity surface emitting laser arrays.

External Cavity Tuning of Coherent Quantum Cascade Laser Array Emitting at^7.6μm

An external cavity quantum cascade laser （QCL） array with a wide tuning range and high output power is pre- sented. The coherent QCL array combined with a diffraction grating and gold mirror is tuned in the Littrow configuration. Taking advantage of the single-lobed fundamental supermode far-field pattern, the tuning capa- bility of 30.6cm-1 is achieved with a fixed injected current of 3.5 A at room temperature. Single-mode emission can be observed in the entire process. The maximum single-mode output power of the external cavity setup is as high as 25mW and is essential in real applications.

Beam Steering Analysis in Optically Phased Vertical Cavity Surface Emitting Laser Array

Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.

Efficient single‑pixel imaging based on a compact fiber laser array and untrained neural network

This paper presents an efficient scheme for single-pixel imaging(SPI)utilizing a phase-controlled fiber laser array and an untrained deep neural network.The fiber lasers are arranged in a compact hexagonal structure and coherently combined to generate illuminating light fields.Through the utilization of high-speed electro-optic modulators in each individual fiber laser module,the randomly modulated fiber laser array enables rapid speckle projection onto the object of interest.Furthermore,the untrained deep neural network is incorporated into the image reconstructing process to enhance the quality of the reconstructed images.Through simulations and experiments,we validate the feasibility of the proposed method and successfully achieve high-quality SPI utilizing the coherent fiber laser array at a sampling ratio of 1.6%.Given its potential for high emitting power and rapid modulation,the SPI scheme based on the fiber laser array holds promise for broad applications in remote sensing and other applicable fields.

Coherent combining of a fiber laser array via cascaded internal phase control technique

We experimentally demonstrated a cascaded internal phase control technique.A laser array with 12 channels was divided into three sub-arrays and a stage array,and phases of the sub-arrays and the stage array were locked by four phase controllers based on the stochastic parallel gradient descent(SPGD)algorithm,respectively.In this way,the phases of the whole array were locked,and the visibility of the interference pattern of the whole emitted laser array in the far field was∼93%.In addition,the technique has the advantage of element expanding and can be further used in the high-power coherent beam combination(CBC)system due to its compact spatial structure.

Directly modulated 25 Gbaud/s tunable in-series DFB laser array for WDM systems

In this Letter,we proposed and experimentally demonstrated a directly modulated tunable laser based on the multi-wavelength distributed feedback(DFB)laser array.The lasers are placed in series to avoid the usage of an optical combiner and additional power loss.A three-section design is utilized to reduce the interference from other lasers and improve the electro-optic response bandwidth.Besides,the reconstruction-equivalent-chirp technique is used to simplify the grating fabrication and precisely control the grating phase.We realized 12 channels with 100 GHz spacing with high side mode suppression ratios of above 50 dB.The output power of all the channels is above 14 mW.The 3 dB electro-optic bandwidth is above 20 GHz at a bias current of 100 mA for all four lasers.A 25 Gb/s data transmission over a standard single-mode fiber of up to 10 km is demonstrated for all 12 channels,and 50 Gb/s data per wavelength is obtained through the four-level pulse amplitude modulation.The proposed directly modulated tunable in-series DFB laser array shows the potential for a compact and low-cost light source for wavelength division multiplexing(WDM)systems,such as next-generation front-haul networks and passive optical networks.

Wideband tunable REC-DFB laser array using thin-film heaters on the submount

A wideband wavelength-tunable 4×5 distributed feedback(DFB)semiconductor laser array based on the reconstructionequivalent-chirp(REC)technique using a simple tuning scheme is demonstrated.It consists of 20 DFB lasers with 4×5matrix interleaving distributions,two-level cascaded Y-branch optical combiners,and one active semiconductor opticalamplifier(SOA),all in-series integrated on one chip.Unlike the traditional thermal-electric cooler(TEC)-based wavelength-tuning scheme,the tunable 4×5 REC-DFB laser array achieves a faster and broader continuous wavelength-tuningrange using TaN thin-film heaters integrated on the AlN submount.By changing the injection current of the TaN resistorfrom 0 to 190 mA,the proposed tunable laser achieves a wavelength-tuning range of∼2.5 nm per channel and a total tuningof over 50 nm.This study opens up new avenues for realizing cost-effective and wide-tuning-range semiconductor lasers.

Design and analysis of the Macao Science Satellite-1's laser retro-reflector array

The origin and spatial-temporal variation of the Earth’s magnetic field(EMF)is one of the important scientific problems that has long been unsolved.The Macao Science Satellite-1(MSS-1)under construction is China’s first high-precision EMF measurement satellite.To satisfy the highly precise requirements of the MSS-1 orbit measurement,a light,high-precision,four-prism laser retroreflector array was designed.It weighs approximately 285 g,its effective reflection area is greater than 1.77 cm^(2),and its size is 100×100×41 mm.The laser retro-reflector array has excellent performance,and it can achieve a ranging precision at the subcentimeter level for satellite laser ranging.It will be developed and installed on the MSS-1 as a power-free load for high-precision orbit measurement and accurate orbit calibration.The MSS-1 is planned to be brought into the International Laser Ranging Service observations.More than 31satellite laser ranging stations in the International Laser Ranging Service around the world will be able to measure the MSS-1 with long arcs,which will support the scientific mission of high-precision EMF exploration.

Flat-Panel Laser Displays Based on Liquid Crystal Microlaser Arrays

Laser displays,benefiting from the characteristic merits of lasers,have led to the revolution of next-generation display technologies owing to their superior color expression.However,the acquisition of pixelated laser arrays as self-emissive panels for flat-panel laser displays remains challenging.Liquid crystal(LC)materials with excellent processability and optoelectronic properties offer considerable potential for the construction of highly ordered multicolor laser arrays.Here,we demonstrate flat-panel laser displays on LC microlaser pixel arrays through a microtemplate-assisted inkjet printing method.Individual organic red-green-blue(RGB)microlaser pixel arrays were obtained by doping dyes into LCs with photonic band edges to obtain single-mode RGB lasing,leading to a much broader color gamut,compared with the standard RGB color space.Then we acquired periodically patterned RGB pixel matrices by positioning LC microlasers precisely into highly ordered arrays,according to the well-organized geometry of the microtemplates.Subsequently,we demonstrated full-color flat-panel laser displays using the LC microlaser pixel matrices as self-emissive panels.These results provide valuable enlightenment for the construction of next-generation flat-panel laser display devices.

SOA Direct Modulation in Wavelength-Selectable Laser Array Light Sources

We demonstrated, for the first time, 2.5-Gb/s SOA direct modulation in the wavelength-selectable DFB laser array. The SOA direct modulation was achieved in the wide tuning range of 22.7nm by selecting arrayed laser and tuning the temperature. 40-km transmission was also confirmed..

A 1.55-μm laser array monolithically integrated with an MMI combiner

The monolithic integration of four 1.55-μm range InGaAsP/InP distributed feedback lasers with a 4× 1 multimode-interference （MMI） optical combiner using the varied width ridge method is proposed and demonstrated. The average output power is 1.5 mW when the current of LD is 100 mA and the threshold current is 30-35 mA at 25 ℃. The lasing wavelength is 1.55-μm range and 40 dB sidemode suppression ratio is obtained. The four channels can operate separately or simultaneously.

Thermal analysis of GaN-based laser diode mini-array

Thermal characteristics of multiple laser stripes integrated into one chip is investigated theoretically in this paper. The temperature pattern of the laser diode mini-array packaged in a TO-can is analyzed and optimized to achieve a uniform temperature distribution among the laser stripes and along the cavity direction. The temperature among the laser stripes varies by more than 5 K if the stripes are equally arranged, and can be reduced to less than 0.4 K if proper arrangement is designed. For conventional submount structure, the temperature variation along the cavity direction is as high as 7 K, while for an optimized trapezoid submount structure, the temperature varies only within 0.5 K.

An accurate and stable method of array element tiling for high-power laser facilities

Due to laser-induced damage, the aperture of optics is one of the main factors limiting the output capability of highpower laser facilities. Because of the general difficulty in achieving large-aperture optics, an alternative solution is to tile some small-aperture ones together. We propose an accurate, stable, and automatic method of array element tiling and verify it on a double-pass 1 × 2 tiled-grating compressor in the XG-III laser facility. The test results show the accuracy and stability of the method. This research provides an efficient way to obtain large-aperture optics for high-power laser facilities.

Propagation of phase-locked truncated Gaussian beam array in turbulent atmosphere

Truncation manipulation is a simple but effective way to improve the intensity distribution properties of the phase-locked Gaussian beam array at the receiving plane. In this paper, the analytical expression for the propagation of the phase-locked truncated Gaussian beam array in a turbulent atmosphere is obtained based on the extended Huygens--Fresnel principle. Power in the diffraction-limited bucket is introduced as the beam quality factor to evaluate the influence of different truncation parameters. The dependence of optimal truncation ratio on the number of beamlets, the intensity of turbulence, propagation distance and laser wavelength is calculated and discussed. It is revealed that the optimal truncation ratio is larger for the laser array that contains more lasers, and the optimal truncation ratio will shift to a larger value with an increase in propagation distance and decrease in intensity of atmosphere turbulence. The optimal truncation ratio is independent of laser wavelength.

Structured mirror array for two-dimensional collimation of a chromium beam in atom lithography

Direct-write atom lithography,one of the potential nanofabrication techniques,is restricted by some difficulties in producing optical masks for the deposition of complex structures.In order to make further progress,a structured mirror array is developed to transversely collimate the chromium atomic beam in two dimensions.The best collimation is obtained when the laser red detunes by natural line-width of transition 7S3 → 7P40 of the chromium atom.The collimation ratio is 0.45 vertically（in x axis）,and it is 0.55 horizontally（in y axis）.The theoretical model is also simulated,and success of our structured mirror array is achieved.

Generation of narrowband Lamb waves based on the Michelson interference technique

An optical method of generating narrowband Lamb waves is presented. It is carried out with a laser line array in a thermoelastic regime implemented by the Michelson interference technique, where the formed array element spacing can be flexibly and conveniently changed to achieve selective mode excitation. In order to simulate the displacement response generated by this array, its intensity distribution function is presented to build a theoretical analysis model and to derive the integral representation of the displacement response. The experimental device and measuring system are built to generate and detect the Lamb waves on a steel plate. Numerical calculation results of narrowband Lamb wave displacement signals based on the theoretical model show good agreement with experimental results.

Numerical and experimental study on coherent beam combining of fibre amplifiers using simulated annealing algorithm

We present the numerical and experimental study on the coherent beam combining of fibre amplifiers by means of simulated annealing （SA） algorithm. The feasibility is validated by the Monte Carlo simulation of correcting static phase distortion using SA algorithm. The performance of SA algorithm under time-varying phase noise is numerically studied by dynamic simulation. It is revealed that the influence of phase noise on the performance of SA algorithm gets stronger with an increase in amplitude or frequency of phase noise; and the laser array that contains more lasers will be more affected from phase noise. The performance of SA algorithm for coherent beam combining is also compared with a widely used stochastic optimization algorithm, i.e., the stochastic parallel gradient descent （SPGD） algorithm. In a proof-of-concept experiment we demonstrate the coherent beam combining of two 1083~nm fibre amplifiers with a total output power of 12~W and 93% combining efficiency. The contrast of the far-field coherently combined beam profiles is calculated to be as high as 95%.

北斗导航系统卫星激光测距综述

Satellite laser ranging(SLR)is an unambiguous measurement technique and generates high accuracy satellite orbit data.All satellites in the BeiDou navigation satellite system(BDS)carried laser retro-reflector arrays(LRAs),so they can be tracked by ground SLR stations in order to provide the accurate observation data.The Shanghai astronomical observatory(SHAO)designed the LRAs,and also developed the dedicated SLR systems using a 1 m-aperture telescope and a transportable cabin-based SLR system with a telescopes of 60 cm aperture.These enable BDS satellite ranging during daytime and nighttime with centimeter-level precision,allowing highly accurate estimations of satellite orbits.Moreover,some of the BDS satellites are also equipped with laser time transfer(LTT)payloads,which were developed by the SHAO and China Academy of Space Technology(CAST),providing a highly accurate time comparison between the satellites and ground clocks.This paper describes the dedicated SLR system and the design of the LRAs for BDS satellites,as well as global SLR measurements.The SLR tracking data is used for evaluating the orbit accuracy of BDS satellites and broadcast ephemeris,with an accuracy of less than 1 m.The LTT measurements to BDS satellites for a single shot have a precision of approximately 300 picoseconds,with a time stability of 20 picoseconds in 500 s.