Electrokinetic-mechanism of water and furfural oxidation on pulsed laser-interlaced Cu_(2)O and CoO on nickel foam

The electrocatalytic oxidation of biomass-derived furfural(FF)feedstocks into 2-furoic acid(FA)holds immense industrial potential in optics,cosmetics,polymers,and food.Herein,we fabricated Co O/Ni O/nickel foam(NF)and Cu_(2)O/Ni O/NF electrodes via in situ pulsed laser irradiation in liquids(PLIL)for the bifunctional electrocatalysis of oxygen evolution reaction(OER)and furfural oxidation reaction(FOR),respectively.Simultaneous oxidation of NF surface to NiO and deposition of CoO and/or Cu_(2)O on NF during PLIL offer distinct advantages for enhancing both the OER and FOR.CoO/NiO/NF electrocatalyst provides a consistently low overpotential of~359 m V(OER)at 10 m A/cm^(2),achieving the maximum FA yield(~16.37 m M)with 61.5%selectivity,79.5%carbon balance,and a remarkable Faradaic efficiency of~90.1%during 2 h of FOR at 1.43 V(vs.reversible hydrogen electrode).Mechanistic pathway via in situ electrochemical-Raman spectroscopy on CoO/NiO/NF reveals the involvement of phase transition intermediates(NiOOH and CoOOH)as surface-active centers during electrochemical oxidation.The carbonyl carbon in FF is attacked by hydroxyl groups to form unstable hydrates that subsequently undergo further oxidation to yield FA products.This method holds promise for large-scale applications,enabling simultaneous production of renewable building materials and fuel.

Ultrafast Laser-Induced Excellent Thermoelectric Performance of PEDOT:PSS Films

Because poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)is water processable,thermally stable,and highly conductive,PEDOT:PSS and its composites have been considered to be one of the most promising flexible thermoelectric materials.However,the PEDOT:PSS film prepared from its commercial aqueous dispersion usually has very low conductivity,thus cannot be directly utilized for TE applications.Here,a simple environmental friendly strategy via femtosecond laser irradiation without any chemical dopants and treatments was demonstrated.Under optimal conditions,the electrical conductivity of the treated film is increased to 803.1 S cm^(-1)from 1.2 S cm^(-1)around three order of magnitude higher,and the power factor is improved to 19.0μW m^(-1)K^(-2),which is enhanced more than 200 times.The mechanism for such remarkable enhancement was attributed to the transition of the PEDOT chains from a coil to a linear or expanded coil conformation,reduction of the interplanar stacking distance,and the removal of insulating PSS with increasing the oxidation level of PEDOT,facilitating the charge transportation.This work presents an effective route for fabricating high-performance flexible conductive polymer films and wearable thermoelectric devices.

Effect of three-volt moxibustion with helium-neon laser irradiation on quality of care in patients with lumbar radiculopathy spondylosis

BACKGROUND Lumbar radiculopathy spondylosis is a relatively common orthopedic disease with a high incidence rate.It most commonly occurs in the lumbar 4-5 and lumbar 5-sacral 1 vertebrae,which account for approximately 95%of cases.It mostly occurs in people aged 30-50 years old and greatly affects their quality of life.AIM To determine the effect of triple-voltage acupuncture combined with helium-neon laser irradiation on the quality of care and improvement of symptoms in patients with lumbar radiculopathy spondylolisthesis.METHODS In this study,we selected 120 patients with lumbar radiculopathy spondylosis who were treated at our hospital between June 2019 to June 2020.The patients were divided into control and observation groups according to the random number table method,with 60 patients in each group.Patients in the observation group were treated with three-volt moxibustion combined with helium-neon laser irradiation,and those in the control group were treated with lumbar traction.After 1 month of treatment,the lumbar pain scores,lumbar spine motor functions,clinical treatment effects,and nursing satisfaction of the two groups were compared.RESULTS The results showed that acupuncture combined with laser irradiation significantly improved the patients'clinical symptoms,i.e.,reduced their low back pain,significantly lower numerical rating scale pain scores in the observation group than in the control group,and better lumbar spine motility than in the control group,compared to lumbar traction.In addition,they were cared for.The treatment effectiveness rate of the observation group was 95.5%,which was significantly higher than that of the control group(81.67%).Satisfaction with care was higher than 90 points in both groups,but the difference was not statistically significant.CONCLUSION Our study provides a clinical rationale for the future treatment of patients with lumbar spine disease.However,further extensive research is needed for validation.

Time-resolved K-shell x-ray spectra of nanosecond laser-produced titanium tracer in gold plasmas

A study of a nanosecond laser irradiation on the titanium-layer-buried gold planar target is presented. The timeresolved x-ray emission spectra of titanium tracer are measured by a streaked crystal spectrometer. By comparing the simulated spectra obtained by using the FLYCHK code with the measured titanium spectra, the temporal plasma states, i.e.,the electron temperatures and densities, are deduced. To evaluate the feasibility of using the method for the characterization of Au plasma states, the deduced plasma states from the measured titanium spectra are compared with the Multi-1D hydrodynamic simulations of laser-produced Au plasmas. By comparing the measured and simulated results, an overall agreement for the electron temperatures is found, whereas there are deviations in the electron densities. The experiment–theory discrepancy may suggest that the plasma state could not be well reproduced by the Multi-1D hydrodynamic simulation, in which the radial gradient is not taken into account. Further investigations on the spectral characterization and hydrodynamic simulations of the plasma states are needed. All the measured and FLYCHK simulated spectra are given in this paper as datasets. The datasets are openly available at http://www.doi.org/10.57760/sciencedb.j00113.00032.

Effect of 532 nm Laser Irradiation on Vc Content in Cabbage Seedlings

[ Objective ]The aim of this study was to discuss the feasibility of breeding cabbage with high Vc by 532 nm laser.[ Method ] With the material of cabbage, the embryo of cabbage seeds was irradiated by frequency doubled Nd ：YAG laser with different power densities and time, and the effects of laser mode on functional leaf area, chlorophyll and Vc contents in cabbage seedlings were also studied. [Result] The results showed that functional leaf area and chlorophyll content were related to laser power density and time when laser power density was 2 -20 mW/mm^2, while the optimal effect was observed at 14 mW/mm^2 for 1 min. The content of Vc in cabbage seedlings was related to dosage of laser irradiation when irradiating time ranged from 1 to 5 min, and the optimal effect was observed at 2.8 J （20 mW/mm^2, 3 min）. [Conclusion] Irradiating the embryo of cabbage seeds with proper irradiation dosage of 532 nm laser can increase its effect on the Vc content significantly.

Exploratory Study of Laser-induced Thymine-thymine Dimer in DNA by RP-HPLC

The relationship between the yield of thymime-thymine dimer after laser irradiation and physical parameters, such as intensity and pulse number was studied to explore the function of laser irradiation to induce thymine-thymine dimer. A modified high-performance liquid chromatography (HPLC) method has been developed for the determination of thymine-thymine dimer in DNA for. The thymine-thymine dimer was prepared by a photochemical reaction to be used as the standard substance. The HPLC method we proposed is not interfered by other hydrolysate from DNA. The stability and reproducibility are good, and it can determine as little as 4.42×10 -5 μg·mL -1 thymime-thymine dimer. Three levels of laser intensity to irradiate DNA were selected from calf thymine to test the influence of the pulse number. The mechanism of DNA lesion and repair caused by laser irradiation was studied preliminarily.

Low-power laser irradiation promotes the proliferation and osteogenic differentiation of human periodontal ligament cells via cyclic adenosine monophosphate

Retaining or improving periodontal ligament （PDL） function is crucial for restoring periodontal defects. The aim of this study was to evaluate the physiological effects of low-power laser irradiation （LPLI） on the proliferation and osteogenic differentiation of human PDL （hPDL） cells. Cultured hPDL cel Is were irradiated （660 nm） daily with doses of O, 1, 2 or 4 J .cm-2. Cell proliferation was evaluated by the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide （MTT） assay, and the effect of LPLI on osteogenic differentiation was assessed by Alizarin Red S staining and alkaline phosphatase （ALP） activity. Additionally, osteogenic marker gene expression was confirmed by real-time reverse transcription-polymerase chain reaction （RT-PCR）. Our data showed that LPLI at a dose of 2 J.cm-2 significantly promoted hPDL cell proliferation at days 3 and 5. In addition, LPLI at energy doses of 2 and 4 J.cm-2 showed potential osteogenic capacity, as it stimulated ALP activity, calcium deposition, and osteogenic gene expression. We also showed that cyclic adenosine monophosphate （cAMP） is a critical regulator of the LPLI-mediated effects on hPDL cells. This study shows that LPLI can promote the proliferation and osteogenic differentiation of hPDL cells. These results suggest the potential use of LPLI in clinical applications for periodontal tissue regeneration.

Low-power laser irradiation inhibits arecoline-induced fibrosis:an in vitro study

Oral submucous fibrosis （OSF） is a potentially malignant disorder that is characterized by a progressive fibrosis in the oral submucosa. Arecoline, an alkaloid compound of the areca nut, is reported to be a major aetiological factor in the development of OSF. Low-power laser irradiation （LPLI） has been reported to be beneficial in fibrosis prevention in different damaged organs. The aim of this study was to investigate the potential therapeutic effects of LPLI on arecoline-induced fibrosis. Arecoline- stimulated human gingival fibroblasts （HGFs） were treated with or without LPLI. The expression levels of the fibrotic marker genes alpha-smooth muscle actin （a-SMA） and connective tissue growth factor （CTGF/CCN2） were analysed by quantitative real- time reverse transcription polymerase chain reaction （RT-PCR） and western blots. In addition, the transcriptional activity of CCN2 was further determined by a reporter assay. The results indicated that arecoline increased the messenger RNA and protein expression of CCN2 and a-SMA in HGF. Interestingly, both LPLI and forskolin, an adenylyl cyclase activator, reduced the expression of arecoline-mediated fibrotic marker genes and inhibited the transcriptional activity of CCN2. Moreover, pretreatment with SQ22536, an adenylyl cyclase inhibitor, blocked LPLI＇s inhibition of the expression of arecoline-mediated fibrotic marker genes. Our data suggest that LPLI may inhibit the expression of arecoline-mediated fibrotic marker genes via the cAMP signalling pathway.

Stimulated photoluminescence emission and trap states in Si/SiO_2 interface formed by irradiation of laser

Stimulated photoluminescence （PL） emission has been observed from an oxide structure of silicon when optically excited by a radiation of 514nm laser. Sharp twin peaks at 694 and 692nm are dominated by stimulated emission, which can be demonstrated by its threshold behaviour and linear transition of emission intensity as a function of pump power. The oxide structure is formed by laser irradiation on silicon and its annealing treatment. A model for explaining the stimulated emission is proposed, in which the trap states of the interface between an oxide of silicon and porous nanocrystal play an important role.

Fabrication of Through Micro-hole Arrays in Silicon Using Femtosecond Laser Irradiation and Selective Chemical Etching

We demonstrate a method of fabricating through micro-holes and micro-hole arrays in silicon using femtosecond laser irradiation and selective chemical etching. The micro-hole formation mechanism is identified as the chemical reaction of the femtosecond laser-induced structure change zone and hydrofluoric acid solution. The morphologies of the through micro-holes and micro-hole arrays are characterized by using scanning electronic microscopy, The effects of the pulse number on the depth and diameter of the holes are investigated. Honeycomb arrays of through micro-holes fabricated at different laser powers and pulse numbers are demonstrated.

Irradiation effects of CO_2 laser parameters on surface morphology of fused silica

To understand the surface morphology evolution of fused silica induced by 10.6μm CO2 laser irradiation at different parameters, this paper reports that optical microscopy, profilometry, and hydrophilicity tests are utilized to characterize the surface structure and roughness of the laser irradiated area. The results show that three typical surface morphologies and two typical hydrophilicity test images are observed at different laser powers and pulse durations. The correlations between surface temperature and surface morphology as well as hydrophilicity behaviours are presented. The different hydrophilicity behaviours are related to surface structures of the laser-induced crater and thermal diffusion area. The thermal diffusion length monotonously increases with increasing laser power and pulse duration. The crater width is almost determined by the laser beam size. The crater depth is more sensitive to the laser power and pulse duration than the crater width.

UV Laser Regulation of Surface Oxygen Vacancy of CoFe2O4 for Enhanced Oxygen Evolution Reaction

Oxygen evolution reaction is one of the key processes in the promising renewable energy technique of electrocatalytic water splitting.Developing high ecient oxygen evolution reaction(OER)catalysts requires determination of the optimal values of the descriptor parameters.Using spinel CoFe2O4 as the model catalyst,this work demonstrates that irradiation with pulsed UV laser can control the quantity of surface oxygen vacancy and thus modify the OER activity,in a volcano-shape evolution trend.This strategy sheds light on quantita-tively investigation of the relationship between surface cation valence,anion vacancy,and physicochemical properties of transition-metal-based compounds.

The Effect of Laser Irradiation on Surface Enhanced Raman Scattering for Silver Film

The laser irradiation effect on the SERS intensity for Ag film is discussed using crystal violet (CV) as a probe. The thickness of silver film,the etching time of the glass slide by gaseous hydrogen fluoride, and the laser irradiation time for different amounts of CV on silver films were investigated. The laser burn out model was proposed to explain the dependence of the SERS intensity of CV on the laser irradiation time.

Study on the Antitumor Effects of Low-energy Laser Irradiation Combined with Cyclophosphamide

Systematic experiments about the antitumor effects of low energy laser irradiation combined with the traditional antitumor medicine of cyclophosphamide were conducted using the experimental model of mouse S180 ascites sarcoma.The three groups of tumor bearing mice were irradiated upon the inner corners with the dosages of 11 00,14 67 and 22 00 J·cm -2 LELI respectively,and injected with CYT intraperitoneally to observe the changes of the survival time,the ascites growth speed,and the kinetic changes of immune functions.The survival times of the three groups of CYT/LELI combination were obviously longer than those of the tumor and CYT control groups.Correspondingly,the amounts of ascites,tumor cells densities and total tumor cells in CYT/LELI groups decreased significantly,while the death ratio of the tumor cells increased.Comparatively,the group of 22 00 J·cm -2 LELI combined with CYT showed the most ideal antitumor effects,and the life prolongation ratio was up to 53 20%.

Growth Mechanism and Characterization of ZnO 3D Nanocrystals by Laser Irradiation & Coaxially Transporting O_2

Different three-dimension （3D） nanotetrapods, containing club-like nanocrystals, nanotetrapods and four-foot-like nanocrystals were synthesized from Zinc sheet via CO2 laser irradiation and coaxially transporting O2. Different nanoproducts were fabricated by changing the content of oxygen in the experiment. The morphologies, components, phase structures and optical properties of the products were investigated by a field-emission scanning electron microscopy, an X-ray diffraction, an energy dispersed X-ray spectrometer and a photoluminescence spectroscope. The X-ray diffraction spectra were obtained on a Rigaku D/max 2500PC diffractometer. The experimental results reveal that high quality ZnO nanotetrapods can be fabricated on the special parameters, and growth of ZnO nanotetrapods depends on Vapour-Liquid-Solid（VLS） model, and the content of oxygen in the gas, namely, oxygen partial pressure is one of main factors to control morphologies and optical properties ofZnO nanotetrapods; these advantages above are important for realization of optoelectronic devices.

Investigation on the hydrodynamics of slab x-ray laser plasma by nonuiform line focused laser irradiation

Based on the two-dimensional model, this paper compares the hydrodynamics of slab x-ray laser plasma produced by different nonuniform line focused irradiations. It finds that the average intensity and the duration of laser pulse and the overall shape of the intensity distribution in the focal line have different influences on the plasma. Calculations show that the evolution of temperature variation is more sensitive to the pulse duration and the electron density variation is more sensitive to the pulse intensity. Pulses with duration of 200 ps to 500 ps and with intensity of 0.2 TW/cm2 to 1.0 TW/cm2 are proved acceptable in slab x-ray lasers.

Laser-induced phase conversion of n-type SnSe_(2)to p-type SnSe

We report a facile phase conversion method that can locally convert n-type SnSe_(2)into p-type SnSe by direct laser irradiation.Raman spectra of SnSe_(2)flakes before and after laser irradiation confirm the phase conversion of SnSe_(2)to SnSe.By performing the laser irradiation on SnSe_(2)flakes at different temperatures,it is found that laser heating effect induces the removal of Se atoms from SnSe_(2)and results in the phase conversion of SnSe_(2)to SnSe.Lattice-revolved transmission electron microscope images of SnSe_(2)flakes before and after laser irradiation further confirm such conversion.By selective laser irradiation on SnSe_(2)flakes,a pattern with SnSe_(2)/SnSe heteostructures is created.This indicates that the laser induced phase conversion technique has relatively high spatial resolution and enables the creation of micron-sized in-plane p-n junction at predefined region.

Novel closed-cycle reaction mode for totally green production of Cu_(1.8)Se nanoparticles based on laser-generated Se colloidal solution

Non-stoichiometric copper selenide(Cu_(2-x)Se,x=0.18~0.25)nanomaterials have attracted extensive attentions due to their excellent thermoelectric,optoelectronic and photocatalytic performances.However,efficient production of Cu_(2-x)Se nanoparticles(NPs)through a green and convenient way is still hindered by the inevitable non-environmentally friendly operations in common chemical synthesis.Herein,we initially reveal the coexistence of seleninic acid content and elemental selenium(Se)NPs in pulsed laser-generated Se colloidal solution.Consequently,we put forward firstly a closedcycle reaction mode for totally green production of Cu_(1.8)Se NPs to exclude traditional requirements of high temperature and toxic precursors by using Se colloidal solution.In such closed-cycle reaction,seleninic acid works as the initiator to oxidize copper sheet to release cuprous ions which can catalyze the disproportion of Se NPs to form Se O_(3)^(2-)and Se^(2-)ions and further produce Cu_(2-x)Se NPs,and the by-product SeO_(3)^(2-)ions promote subsequent formation of cuprous from the excessive Cu sheet.In experiments,the adequate copper(Cu)sheet was simply dipped into such Se colloidal solution at 70℃,and then the stream of Cu_(1.8)SeNPs could be produced until the exhaustion of selenium source.The conversion rate of Se element reaches to more than 75%when the size of Se NPs in weakly acidic colloidal solution is limited between 1 nm and 50 nm.The laser irradiation duration shows negative correlation with the size of Se NPs and unobvious impact to the p H of the solution which both are essential to the high yield of Cu_(1.8)SeNPs.Before Cu sheet is exhausted,Se colloidal solution can be successively added without influences to the product quality and the Se conversion rate.Such green methodology positively showcases a brand-new and potential strategy for mass production of Cu_(2-x)Se nanomaterials.

Anti-tumor response induced by immunologically modified carbon nanotubes and laser irradiation using rat mammary tumor model

The ideal treatment modality for metastatic cancer would be a local treatment that can destroy primary tumors while inducing an effective systemic anti-tumor response.To this end,we de-veloped laser immunotherapy,combining photothermal laser application with an immunoadju-vant for the treatment of metastatic cancer.Additionally,to enhance the selective photothermal effect,we integrated light-absorbing nanomaterials into this innovative treatment.Specifically,we developed an immunologically modified carbon nanotube combining single-walled carbon nanotubes(SWNTs)with the immunoadjuvant glycated chitosan(GC).To determine the ef-fectiveness of laser iradiation,a series of experiments were performed using two different irra-diation durations-5 and 10 min.Rats were inoculated with DMBA-4 cancer cells,a metastatic cancer cell line.The treatment group of rats receiving laser irradiation for 10 min had a 50%long-term survival rate without residual primary or metastatic tumnors.The treatment group of rats receiving laser irradiation for 5 min had no long-term survivors;all rats died with multiple metastases at several distant sites.Therefore,Laser+SWNT-GC treatment with 10 min of laser irradiation proved to be efective at reducing tumor size and inducing long-term anti-tumor immunity.

Influences of KrF laser irradiation on the structure and luminescence of ZnO single crystal

In this paper, we investigate the laser irradiation of ZnO single crystals and its influence on photoluminescence. Our study shows that the photoluminescence of ZnO single crystals strongly depends on surface morphologies. The ultraviolet emissions of laser treated-ZnO under 200 mJ/cm^2 become stronger, whereas for those deteriorated by irradiation above 200 mJ/cm^2, the green emissions centred at 2.53 eV are significantly enhanced with a red-shift to 2.19 eV, probably due to the changes in the charge states of the defects. Enhanced yellow-green emissions are well resolved into four peaks at around 1.98, 2.19, 2.36, and 2.53 eV due to a shallow irradiation depth. Possible origins are proposed and discussed.