Laser Flash Photolysis Mechanism of Anthraquinone-2-Sodium Sulfonate in Pyridine Ionic Liquid/Water Mixed System

The photochemical reaction process of anthraquinone-2-sodium sulfonate （AQS） in the mixture of water （H2O） and N-butylpyridinium tetrafluoroborate （[BPy] [BF4]） was studied using the laser flash photolysis technique. Experimental results show that the excited triplet of AQS （3AQS＊） could react rapidly with H2O and the transient absorption spectra greatly changed by increasing the volume fraction of the ionic liquid （VIL） in [BPy][BF4]/H2O mixtures. The absorbance at 510 nm increased gradually with increasing VIL when 0〈VIL〈0.1. By contrast, the absorbance decreased gradually when VIL〉0.1. Otherwise, the absorbance of the band near 380 nm steadily increased. The apparent kinetic parameters of transient species B and ^3AQS＊ are obtained approximately. 3AQS＊ abstracting hydrogen from [BPy]＋ was also explored. It was deduced that the 350-420 nm band was the superposition of the peaks of 3AQS＊ and AQSH＇. The two reactions of 3AQS＊ with [BPy][BF4] and H2O are a pair of competitive reactions. We also concluded that the entire reaction processes slow down in the case of high [BPy] [BF4] concentrations.

Electron Transfer Reaction Between Desoxyadenosine and Triplet 2-Methyl-1,4-naphthaquinone:A Laser Photolysis Study

Introduction Electron transfer oxidation of DNA by triplet artificial photonuclease reveals a bright prospect of its application in biology and medicine. Both molecular orbital calculation and laser experiments have indicated that the homo guanine sequence should be the final localization site of photoexcited hole via long range migration within DNA. However, the direct observation of the produced ion pairs of biomolecules especially the stabilized radical cation DNA or its components is hampered by the overwhelming transient absorption of protonated radical anion of photosensitizers, such as 2-methyl-1,4-naphthaguinonel （MQ）.

Temperature-dependent Kinetics on Laser Induced Photolysis of Aqueous CS_2-HONO Solutions

A laser photolysis/transient absorption technique has been employed to investigate the photolysis kinetics of aqueous CS2-HONO solutions at 355 nm. Spectral analysis shows that CS2OH will react with HONO to form CS2OH-HONO. Temperature dependent rate coefficients for the reaction are reported for the first time. The following Arrhenius expressions adequately summarize the kinetic data obtained over the temperature range 273-313 K （units are L·mol^-1·s^-1）： In k = （31.6±0.6）-{（4.1±0.2）×10^3/T}, and the activation energy in unit of kJ.molA is 32.47 with the temperature accuracy 0.2 K.

pH Dependence of Photochemical Kinetics of Thioxanthen-9-one from Nanosecond Time-resolved Laser Flash Photolysis

pH dependent uorescence emission of a thioxanthone-based probe has been re-ported recently.The potential deter-minant factors of pH dependence may provide important clues to design novel thioxanthone-based probes in the fu-ture.pH dependence of photochemical kinetics of thioxanthone itself was inves-tigated in this work using nanosecond time-resolved laser ash photolysis.The nanosecond time-resolved transient absorption spectra and kinetics of TX in aqueous acetonitrile were recorded,as well as for a model reaction system including TX with diphenylamine(DPA)as a co-initiator.Besides the well-known absorption peak of ^(3)TX*,other peaks at 417,518,673 and 780 nm,have been reliably attributed to major intermediates in the overall reaction between TX and DPA with photolysis,which has been con rmed to occur along a multistep process.In the strong acidic solution(pH≈3.0),TX and protonated TX ions(TXH^(+))coexist due to protonated equilibrium.Consequently,high proton concentration promotes the predominant decay pathway after photolysis from electron transfer to proton affnity.Subsequently,the di erent primary products,^(3)TXH^(+*)or TX^(·-),proceed di erent secondary reaction channels.In addition,within the wide pH range from weak acid(pH=5.0)to alkaline solution(pH=13.0),the overall reaction mechanism and rates do not show visible changes.

TIME-RESOLVED IR STUDIES OF UV LASER FLASH PHOTOLYSIS OF W(CO)_6 IN C_6H_(12)-CCl_4 AND CCl_4 SOLUTION

Time-resolved IR absorption spectroscopy has been used to atudy the photochemistry of W(CO)_6 in cyclohexane, carbon tetrachloride, and the mixture of carbon tetrachloride and cyelohexane. The reastion of photolytically generated W(CO)_5. C_6H_(12) with CCl_4 was investigated. An intermediate with a lifetime of about 0.5ms, presumably attributed as W(GO)_5.CCl_4, was first observed.

Time-resolved laser flash photolysis study on transient reaction between excited triplet state of anthraquinone derivatives (AQS) and 2-deoxythymidine

The transient absorption spectra and kinetics of excited triplet state of anthraquinone derivatives 2-anthraquinonesulfonatesodium (AQS) and 2-deoxythymidine (dT) have been investigated in CH3CN-H2O (97:3) using the time-resolved laser flash photolysis technique (KrF, 248 nm). The absorption spectra of dT radical cation and the radical anion of AQS have been observed. From dynamic and thermodyrnamic analysis, the mechanism of this transient reaction has been initially analysed.

Alloy design for laser powder bed fusion additive manufacturing:a critical review

Metal additive manufacturing(AM)has been extensively studied in recent decades.Despite the significant progress achieved in manufacturing complex shapes and structures,challenges such as severe cracking when using existing alloys for laser powder bed fusion(L-PBF)AM have persisted.These challenges arise because commercial alloys are primarily designed for conventional casting or forging processes,overlooking the fast cooling rates,steep temperature gradients and multiple thermal cycles of L-PBF.To address this,there is an urgent need to develop novel alloys specifically tailored for L-PBF technologies.This review provides a comprehensive summary of the strategies employed in alloy design for L-PBF.It aims to guide future research on designing novel alloys dedicated to L-PBF instead of adapting existing alloys.The review begins by discussing the features of the L-PBF processes,focusing on rapid solidification and intrinsic heat treatment.Next,the printability of the four main existing alloys(Fe-,Ni-,Al-and Ti-based alloys)is critically assessed,with a comparison of their conventional weldability.It was found that the weldability criteria are not always applicable in estimating printability.Furthermore,the review presents recent advances in alloy development and associated strategies,categorizing them into crack mitigation-oriented,microstructure manipulation-oriented and machine learning-assisted approaches.Lastly,an outlook and suggestions are given to highlight the issues that need to be addressed in future work.

Laser photolysis of ionic liquid [bmim][PF_6]

Photoinduced chemical reactions of 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF_6]) were studied by laser photolysis at a wavelength of 266 nm.Excited triplet state ~3[bmim]^+ was observed,radical cation [bmim]^(2+) and neutral [bmim] radical via photoionization were also formed.Energy transfer from ~3[bmim]^+ toβ-carotene was confirmed.Oxidation via one electron transfer from TMPD to ~3[bmim]^+ was also observed and the rate constant was determined to be 1.2×10.5 L.mol^(-1).s^(-1).The reaction of [bmim][PF_6] with hydrated electron (e_(aq)) was confirmed by laser photolysis in aqueous solution.

Underwater four-quadrant dual-beam circumferential scanning laser fuze using nonlinear adaptive backscatter filter based on pauseable SAF-LMS algorithm

The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.

Surface micromorphology and nanostructures evolution in hybrid laser processes of slicing and polishing single crystal 4H-SiC

Slicing and post-treatment of SiC crystals have been a significant challenge in the integrated circuit and microelectronics industry.To compete with wire-sawing and mechanical grinding technology,a promis-ing approach combining laser slicing and laser polishing technologies has been innovatively applied to increase utilization and decrease damage defects for single crystal 4H-SiC.Significant material utiliza-tion has been achieved in the hybrid laser processes,where material loss is reduced by 75%compared to that of conventional machining technologies.Without any special process control or additional treat-ment,an internally modified layer formed by laser slicing can easily separate the 4H-SiC crystals using an external force of about∼3.6 MPa.The modified layer has been characterized using a micro-Raman method to determine residual stress.The sliced surface exhibits a combination of smooth and coarse appearances around the fluvial morphology,with an average surface roughness of over S_(a) 0.89μm.An amorphous phase surrounds the SiC substrate,with two dimensions of lattice spacing,d=0.261 nm and d=0.265 nm,confirmed by high-resolution transmission electron microscopy(HRTEM).The creation of laser-induced periodic surface nanostructures in the laser-polished surface results in a flatter surface with an average roughness of less than S_(a) 0.22μm.Due to the extreme cooling rates and multiple thermal cy-cles,dissociation of Si-C bonding,and phase separation are identified on the laser-polished surface,which is much better than that of the machining surface.We anticipate that this approach will be applicable to other high-value crystals and will have promising viability in the aerospace and semiconductor industries.

Comparison of the Inflammatory Reaction to Laser Photolysis and Conventional Phacoemulsification

Purpose:To compare the postoperative inflammatory reaction induced by laser photolysis and conventional phacoemulification. Methods:Anterior chamber flare and cells were measured preoperatively and 1 day, 1 week, 1 month and 3 months postoperatively in two groups. In group 1, thirty-two eyes underwent laser photolysis. In group 2, thirty-five eyes underwent conventional phacoe-mulification. Results:Anterior chamber flare and cell measurements had no significant difference between two groups preoperatively and 1 day, 1 week, 1 month and 3 months postoper-atively. Flare and cell values returned to preoperative values by the third month. Conclusions:Postoperative inflammatory response to laser photolysis was equal to conventional phacoemulsification, and recovery occurred in 3 months postoperatively.Eye Science 2004;20:6-9.

Laser‑Induced and MOF‑Derived Metal Oxide/Carbon Composite for Synergistically Improved Ethanol Sensing at Room temperature

Advancements in sensor technology have significantly enhanced atmospheric monitoring.Notably,metal oxide and carbon(MO_(x)/C)hybrids have gained attention for their exceptional sensitivity and room-temperature sensing performance.However,previous methods of synthesizing MO_(x)/C composites suffer from problems,including inhomogeneity,aggregation,and challenges in micropatterning.Herein,we introduce a refined method that employs a metal–organic framework(MOF)as a precursor combined with direct laser writing.The inherent structure of MOFs ensures a uniform distribution of metal ions and organic linkers,yielding homogeneous MO_(x)/C structures.The laser processing facilitates precise micropatterning(<2μm,comparable to typical photolithography)of the MO_(x)/C crystals.The optimized MOF-derived MO_(x)/C sensor rapidly detected ethanol gas even at room temperature(105 and 18 s for response and recovery,respectively),with a broad range of sensing performance from 170 to 3,400 ppm and a high response value of up to 3,500%.Additionally,this sensor exhibited enhanced stability and thermal resilience compared to previous MOF-based counterparts.This research opens up promising avenues for practical applications in MOF-derived sensing devices.

A Slow and Clean Fluorine Atom Beam Source Based on Ultraviolet Laser Photolysis

A slow and clean uorine atom beam source is one of the essential components for the low-collision energy scattering experiment involving uorine atom.In this work,we describe a simple but ef-fective photolysis uorine atom beam source based on ultraviolet laser photolysis,the performance of which was demonstrated by high-resolution time-of-ight spectra from the reactive scattering of F+HD.This beam source paved the way for stud-ies of low energy collisions with uorine atoms.

Primary study on solvent effect of COCA4 by laser photolysis

Reaction of p-tert-oxocalix[4]arene in acetonitrile (CH3CN) by 308nm laser pulses was investigated to understand its mechanism as polymer stabilizer. Four main absorption bands were observed at 300nm, 400nm, 460nm and 540nm. The 300nm absorption was assigned to the absorption of phenoxy radical, and the 460nm and 540nm were triple state absorption. It was concluded that the relative stable phenoxy radical mediate was formed through intramolecular energy transition of carbonyl triplet after laser excitation in CH3CN. The formation mechanism of phenoxyl radical was quite different from that in cyclohexane (C6H12), which was cooperation of two-photon process and one-photon process.

Backward scattering of laser plasma interactions from hundreds-of-joules broadband laser on thick target

The use of broadband laser technology is a novel approach for inhibiting processes related to laser plasma interactions(LPIs).In this study,several preliminary experiments into broadband-laser-driven LPIs are carried out using a newly established hundreds-of-joules broadband second-harmonic-generation laser facility.Through direct comparison with LPI results for a traditional narrowband laser,the actual LPI-suppression effect of the broadband laser is shown.The broadband laser had a clear suppressive effect on both back-stimulated Raman scattering and back-stimulated Brillouin scattering at laser intensities below 1×10^(15) W cm^(−2).An abnormal hot-electron phenomenon is also investigated,using targets of different thicknesses.

Short-term effectiveness of intelligent navigated laser photocoagulation versus subthreshold micropulse laser in patients with chronic central serous chorioretinopathy

AIM:To compare the short-term effectiveness of intelligent navigated laser photocoagulation and 577-nm subthreshold micropulse laser(SML)treatment in patients with chronic central serous chorioretinopathy(cCSC).METHODS:This observational retrospective cohort study included 60 consecutive patients who underwent intelligent navigated laser photocoagulation(n=30)or 577-nm SML treatment(n=30)for cCSC between Jan.2021 and Oct.2022.During 3mo follow-up,all patients underwent assessments of best correct visual acuity(BCVA)and optical coherence tomography(OCT).RESULTS:The operation of laser treatment was successful in all cases.At 1mo,BCVA improved significantly more in the intelligent navigated laser photocoagulation group compared to the SML group(P<0.05).The change was not significantly different at 3mo(P>0.05).Central macular thickness(CMT)in the intelligent navigated laser photocoagulation group was lower than in the SML group at 1mo(P<0.05).The subfoveal choroidal thickness(SFCT)in two groups were all significantly improved at 3mo(all P<0.05).The change between two groups was not significantly different at 1mo or at 3mo(P>0.05).CONCLUSION:Intelligent navigated laser photocoagulation is superior to SML for treating cCSC,leading to better improvements in vision and CMT for short term.

Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review

Laser powder bed fusion(L-PBF) has attracted significant attention in both the industry and academic fields since its inception, providing unprecedented advantages to fabricate complex-shaped metallic components. The printing quality and performance of L-PBF alloys are infuenced by numerous variables consisting of feedstock powders, manufacturing process,and post-treatment. As the starting materials, metallic powders play a critical role in infuencing the fabrication cost, printing consistency, and properties. Given their deterministic roles, the present review aims to retrospect the recent progress on metallic powders for L-PBF including characterization, preparation, and reuse. The powder characterization mainly serves for printing consistency while powder preparation and reuse are introduced to reduce the fabrication costs.Various powder characterization and preparation methods are presented in the beginning by analyzing the measurement principles, advantages, and limitations. Subsequently, the effect of powder reuse on the powder characteristics and mechanical performance of L-PBF parts is analyzed, focusing on steels, nickel-based superalloys, titanium and titanium alloys, and aluminum alloys. The evolution trends of powders and L-PBF parts vary depending on specific alloy systems, which makes the proposal of a unified reuse protocol infeasible. Finally,perspectives are presented to cater to the increased applications of L-PBF technologies for future investigations. The present state-of-the-art work can pave the way for the broad industrial applications of L-PBF by enhancing printing consistency and reducing the total costs from the perspective of powders.

Role of heterogenous microstructure and deformation behavior in achieving superior strength-ductility synergy in zinc fabricated via laser powder bed fusion

Zinc(Zn)is considered a promising biodegradable metal for implant applications due to its appropriate degradability and favorable osteogenesis properties.In this work,laser powder bed fusion(LPBF)additive manufacturing was employed to fabricate pure Zn with a heterogeneous microstructure and exceptional strength-ductility synergy.An optimized processing window of LPBF was established for printing Zn samples with relative densities greater than 99%using a laser power range of 80∼90 W and a scanning speed of 900 mm s−1.The Zn sample printed with a power of 80 W at a speed of 900 mm s−1 exhibited a hierarchical heterogeneous microstructure consisting of millimeter-scale molten pool boundaries,micrometer-scale bimodal grains,and nanometer-scale pre-existing dislocations,due to rapid cooling rates and significant thermal gradients formed in the molten pools.The printed sample exhibited the highest ductility of∼12.1%among all reported LPBF-printed pure Zn to date with appreciable ultimate tensile strength(∼128.7 MPa).Such superior strength-ductility synergy can be attributed to the presence of multiple deformation mechanisms that are primarily governed by heterogeneous deformation-induced hardening resulting from the alternative arrangement of bimodal Zn grains with pre-existing dislocations.Additionally,continuous strain hardening was facilitated through the interactions between deformation twins,grains and dislocations as strain accumulated,further contributing to the superior strength-ductility synergy.These findings provide valuable insights into the deformation behavior and mechanisms underlying exceptional mechanical properties of LPBF-printed Zn and its alloys for implant applications.