Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating con ditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2) cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.

Recent progress in laser texturing of battery materials: a review of tuning electrochemical performances, related material development, and prospects for large-scale manufacturing

Traditional electrode manufacturing for lithium-ion batteries is well established,reliable,and has already reached high processing speeds and improvements in production costs.For modern electric vehicles,however,the need for batteries with high gravimetric and volumetric energy densities at cell level is increasing;and new production concepts are required for this purpose.During the last decade,laser processing of battery materials emerged as a promising processing tool for either improving manufacturing flexibility and product reliability or enhancing battery performances.Laser cutting and welding already reached a high level of maturity and it is obvious that in the near future they will become frequently implemented in battery production lines.This review focuses on laser texturing of electrode materials due to its high potential for significantly enhancing battery performances beyond state-of-the-art.Technical approaches and processing strategies for new electrode architectures and concepts will be presented and discussed with regard to energy and power density requirements.The boost of electrochemical performances due to laser texturing of energy storage materials is currently proven at the laboratory scale.However,promising developments in high-power,ultrafast laser technology may push laser structuring of batteries to the next technical readiness level soon.For demonstration in pilot lines adapted to future cell production,process upscaling regarding footprint area and processing speed are the main issues as well as the economic aspects with regards to CapEx amortization and the benefits resulting from the next generation battery.This review begins with an introduction of the three-dimensional battery and thick film concept,made possible by laser texturing.Laser processing of electrode components,namely current collectors,anodes,and cathodes will be presented.Different types of electrode architectures,such as holes,grids,and lines,were generated;their impact on battery performances are illustrated.The usage of high-energy materials,which are on the threshold of commercialization,is highlighted.Battery performance increase is triggered by controlling lithium-ion diffusion kinetics in liquid electrolyte filled porous electrodes.This review concludes with a discussion of various laser parameter tasks for process upscaling in a new type of extreme manufacturing.

Extraction of Laser Stripe Center Line Based on Genetic Algorithm and NURBS Interpolation

To improve the measurement accuracy of structured laser for inner surface dimensions of a deep hole, a new method to extract the laser stripe center line is proposed. An improved adaptive genetic algorithm that can converge rapidly and search the global optimum is used to determine the threshold for the laser stripe segmentation. And then NURBS interpolation which has a good local control capability is adopted to extract the laser stripe center line. Experiments show that the extracted laser stripe center line is stable and the diameter of the deep hole can be measured accurately.

Room-Temperature Continuous-Wave Operation of InGaN-Based Blue-Violet Laser Diodes with a Lifetime of 15.6 Hours

We report our recent progress of investigations on InGaN-based blue-violet laser diodes （LDs）. The roomtemperature （RT） cw operation lifetime of LDs has extended to longer than 15.6 h. The LD structure was grown on a c-plane free-standing （FS） GaN substrate by metal organic chemical vapor deposition （MOCVD）. The typical threshold current and voltage of LD under RT cw operation are 78 mA and 6.8 V, respectively. The experimental analysis of degradation of LD performances suggests that after aging treatment, the increase of series resistance and threshold current can be mainly attributed to the deterioration of p-type ohmic contact and the decrease of internal quantum efticiency of multiple quantum well （MQW）, respectively.

Effect of Vacuum on the Laser-Induced Damage of Anti-Reflection Coatings

In the comparison of damage modifications, absorption measurement and energy dispersive x-ray analysis, the effect of vacuum on the laser-induced damage of anti-reflection coatings is analyzed. It is found that vacuum decreases the laser-induced damage threshold of the films. The low laser-induced damage threshold in vacuum environments as opposed to air environments is attributed to water absorption and the formation of the O/Si, O/Zr sub-stoichiometry in the course of laser irradiation.

Coherent Features of Resonance-Mediated Two-Photon Absorption Enhancement by Varying the Energy Level Structure,Laser Spectrum Bandwidth and Central Frequency

The femtosecond pulse shaping technique has been shown to be an effective method to control the multi-photon absorption by the light–matter interaction. Previous studies mainly focused on the quantum coherent control of the multi-photon absorption by the phase, amplitude and polarization modulation, but the coherent features of the multi-photon absorption depending on the energy level structure, the laser spectrum bandwidth and laser central frequency still lack in-depth systematic research. In this work, we further explore the coherent features of the resonance-mediated two-photon absorption in a rubidium atom by varying the energy level structure, spectrum bandwidth and central frequency of the femtosecond laser field. The theoretical results show that the change of the intermediate state detuning can effectively influence the enhancement of the near-resonant part, which further affects the transform-limited （TL）-normalized final state population maximum. Moreover, as the laser spectrum bandwidth increases, the TL-normalized final state population maximum can be effectively enhanced due to the increase of the enhancement in the near-resonant part, but the TL-normalized final state population maximum is constant by varying the laser central frequency. These studies can provide a clear physical picture for understanding the coherent features of the resonance-mediated two-photon absorption, and can also provide a theoretical guidance for the future applications.

Enhancement of photocatalytic activity by femtosecond-laser induced periodic surface structures of Si

Laser induced periodic surface structures(LIPSS)represent a kind of top down approach to produce highly reproducible nano/microstructures without going for any sophisticated process of lithography.This method is much simpler and cost effective.In this work,LIPSS on Si surfaces were generated using femtosecond laser pulses of 800 nm wavelength.Photocatalytic substrates were prepared by depositing TiO2 thin films on top of the structured and unstructured Si wafer.The coatings were produced by sputtering from a Ti target in two different types of oxygen atmospheres.In first case,the oxygen pressure within the sputtering chamber was chosen to be high(3×10^–2 mbar)whereas it was one order of magnitude lower in second case(2.1×10^–3 mbar).In photocatalytic dye decomposition study of Methylene blue dye it was found that in the presence of LIPSS the activity can be enhanced by 2.1 and 3.3 times with high pressure and low pressure grown TiO2 thin films,respectively.The increase in photocatalytic activity is attributed to the enlargement of effective surface area.In comparative study,the dye decomposition rates of TiO2 thin films grown on LIPSS are found to be much higher than the value for standard reference thin film material Pilkington Activ^TM.

High Characteristic Temperature 1.3μm InAs/GaAs Quantum-Dot Lasers Grown by Molecular Beam Epitaxy

We report the molecular beam epitaxy growth of 1.3 μm InAs/GaAs quantum-dot （QD） lasers with high characteristic temperature T0. The active region of the lasers consists of five-layer InAs QDs with p-type modulation doping. Devices with a stripe width of 4 μm and a cavity length of 1200 μm are fabricated and tested in the pulsed regime under different temperatures. It is found that T0 of the QD lasers is as high as 532 K in the temperature range from 10°C to 60°C. In addition, the aging test for the lasers under continuous wave operation at 100°C for 72 h shows almost no degradation, indicating the high crystal quality of the devices.

Structural deformation of nitro group of nitromethane molecule in liquid phase in an intense femtosecond laser field

The structural deformation of NO2 group induced by an intense femtosecond laser field of liquid nitromethane（NM）molecule is detected by time-and frequency-resolved coherent anti-Stokes Raman spectroscopy（CARS） technique with the intense pump laser. Here, we present the mechanism of molecular alignment and deformation. The CARS spectra and its FFT spectra of liquid NM show that the NO2 torsional mode couples with the CN symmetric stretching mode and that the NO2 group undergoes ultrafast structural deformation with a relaxation time of 195 fs. The frequency of the NO2 torsional mode in liquid NM（50.8±0.3 cm^-1） at room temperature is found. Our results prove the structural deformation of two groups in liquid NM molecule occur simultaneously in the intense laser field.

AlGaN-Based Deep-Ultraviolet Light Emitting Diodes Fabricated on AlN/sapphire Template

We report on the growth and fabrication of deep ultraviolet （DUV） light emitting diodes （LEDs） on an AIN template which was grown on a pulsed atomic-layer epitaxial buffer layer. Threading dislocation densities in the AlN layer are greatly decreased with the introduction of this buffer layer. The crystalline quality of the AlGaN epilayer is further improved by using a low-temperature GaN interlayer between AlGaN and AlN. Electroluminescences of different DUV-LED devices at a wavelength of between 262 and 317nm are demonstrated. To improve the hole concentration of p-type AlGaN, Mg-doping with trimethylindium assistance approach is performed. It is found that the serial resistance of DUV-LED decreases and the performance of DUV-LED such as EL properties is improved.

Equivalent Method of Solving Quantum Efficiency of Reflection-Mode Exponential Doping GaAs Photocathode

The mathematical expression of the electron diffusion and drift length LDE of exponential doping photocathode is deduced. In the quantum efficiency equation of the reflection-mode uniform doping cathode, substituting LDE for LD, the equivalent quantum efficiency equation of the reflection-mode exponential doping cathode is obtained. By using the equivalent equation, theoretical simulation and experimental analysis shows that the equivalent index formula and formula-doped cathode quantum efficiency results in line. The equivalent equation avoids complicated calculation, thereby simplifies the process of solving the quantum efficiency of exponential doping photocathode.

Energy Transfer from Ce^3＋ to Eu^2＋ in LiSrBO3 and Its Potential Application in UV-LED-Based White LEDs

Ce3＋/Eu2＋ codoped LiSrBO3 phosphor is synthesized, and its luminescent characteristics are investigated. LiSrBO3：Ce3＋,Eu2＋ phosphor exhibits varied hues from blue to white and eventually to yellow by resonance-type energy transfer from Ce3＋ ion to Eu2＋ ion and tuning the relative proportion of Ce3＋/Eu2＋ properly. Energy transfer mechanism in LiSrBOa：Ce3＋, Eu2＋ phosphor is dominated by the dipole-dipole interaction, and the critical distance of the energy transfer is estimated to be about 2 nm by both spectral overlap and concentration quenching methods. Under UV radiation, white light is generated by coupling 436 and 565nm emission bands attributed to Ce3＋ and Eu2＋ radiations, respectively.

Laser ablation and structuring of CdZnTe with femtosecond laser pulses

We report an experimental investigation on laser ablation and associated surface structuring of CdZnTe by femtosecond Ti:Sa laser pulses(laser wavelengthλ≈800 nm,≈35 fs,10 Hz),in air.By exploiting different static irradiation conditions,the fluence threshold and the incubation effect in CdZnTe are estimated.Interestingly,surface treatment with a low laser fluence(laser pulse energy E≈5-10_μJ)and number of shots(5<N<50)show the formation of well-defined cracks in the central part of the shallow crater,which is likely associated to a different thermal expansion coefficients of Te inclusions and matrix during the sample heating and cooling processes ensuing femtosecond laser irradiation.Irradiation with a larger number of pulses(N≈500,1000)with higher pulse energies(E≈30-50μJ)results in the formation of welldefined laser-induced periodic surface structures(LIPSS)in the outskirts of the main crater,where the local fluence is well below the material ablation threshold.Both low spatial frequency and high spatial frequency LIPSS perpendicular to the laser polarization are found together and separately depending on the irradiation condition.These are ascribed to a process of progressive aggregation of randomly distributed nanoparticles produced during laser ablation of the deep crater in the region of the target irradiated by a fluence below the ablation threshold with many laser pulses.

Design and Fabrication of an Er-Doped Silica Optical Fiber with Six Photosensitive Subcores

A type of multi-core Er-doped photosensitive silica optical fiber （MC-EDPF） is proposed and fabricated, in which a high consistency Er-doped core is surrounded by six high consistency Ge-doped cores. The multi-core design can overcome the difficulties encountered in the design and fabrication of single-core EDPFs through a modified chemical vapor deposition method combined with solution doping technology, and there is a conflict between high consistency Er doping and high consistency Ce doping. The absorption of MC-EDPFs achieved 15.876dB/m at 1550mm and lOdB/m at 98Ohm. The refleetivity of the fiber Bragg gratings （FBCs） written directly on the MC-EDPFs is as much as 96.84%.

Self-Assembled Colloidal Crystals in Capillary with Its Fiber Junction

Silica microspheres self-assembled in glass capillary are investigated. Monodisperse silica microsphere dispersions in diameter 320nm are self-organized into a bulk cylindrical colloidal crystal by evaporation induced nucleation and crystallization. The resulting colloidal crystals are characterized by optical microscopy and scanning electronic microscopy （SEM）, and the SEM images show these crystals dominate in fcc lattice with its （111） crystallographic axis as longitudinal. The colloidal crystal filled capillary is packaged into a heat-shrink plastic tube and a fiber measurement system is designed to measure the optical property of colloidal bulk in capillary. It is found that an appreciable bandgap appears at wavelength 686 nm from the transmission spectroscopy, which is consistent with the theoretical estimation. A considerable photonic band gap of up to -10 dB and a steep photonic band edge of up to 0.25 dB/nm indicate that silica microspheres are promising for implementing optical filter applications in fiber systems.

Implant Depth Influence on InGaAsP/InP Double Quantum Well Intermixing Induced by Phosphorus Ion Implantation

We investigate quantum well intermixing of a double-quantum-well structure caused by phosphorus ion implantation by means of photoluminescence （PL）. The ion implantation is performed at the energy of 120keV with the dose ranging from 1 × 10^11 to 1 × 10^14/cm^2. The rapid thermal annealing is performed at the temperature of 700℃ for 30s under pure nitrogen protection. The PL measurement shows that the band gap blueshift is influenced by the depth of ion implantation. The blueshift of the upper well which is closer to the implanted wcancies is enhanced with the ion dose faster than that from a lower well under the lower dose implantation （〈 5 × 10^11/cm^2）. When the ion dose is over 10^12/cm^2, the band gap blueshift from both the wells increases with the ion dose and finally the two peaks combine together as one peak, indicating that the ion implantation results in a total intermixing of both the quantum wells.

Irradiation Effects of Femtosecond Pulses on Refractive Index of Ag-Embedded Nanocomposite Glasses

The irradiation effects of femtosecond pulses on Ag-embedded composite glasses fabricated by ion-exchange are investigated using z-scan measurement. Both changes of the refractive index caused by the laser irradiation effect and the third-order optical nonlinearity are observed in the experiment. Taking the change of the linear and nonlinear refractive index into consideration, the fitting results are in agreement with the experimental results.

A Novel Photonic Quasicrystal Fiber with Broadband Large Negative Dispersion

A broadband highly dispersive fiber based on a dual-concentric-core photonic quasicrystal fiber （PQF） is designed for chromatic dispersion compensation. The fiber is composed of pure silica background and air-holes without doping. The fundamental supermode has a large negative dispersion value of about ^-19600 ps^-1nm^-11^-1km^-11 over an optical communication band around 1550 nm and a full width at half maximum （FWHM） of 40 nm. By adjusting the structural parameters, a dispersion of ^-12250 ps^-1nm^-11^-1km^-11 around 1550 nm with the FWHM exceeding 280 nm is obtained and the dispersion-bandwidth product can reach 630 GHz^-11^-1km^-11, which is the highest value of dispersion-bandwidth product from pure silica fibers reported so far.

CRYSTAL STRUCTURE AND POWDER DIFFRACTION OF Na_5Y-(WO_4)_4

Title compound Na5Y (WO4)4 (Mr = 1195. 24) crystallizes in the space group I41/a with the cell parameters a= 11. 447(7), c= 11. 336(1) A , Z = 4, V = 1485(2) A3, A = 5. 34 g/cm3. A(MoKα) = 0. 71069 A. F(000) = 2702, final R = 0. 045,Rw = 0. 054 for 936 observed reflections with I≥3σ(I). The title compound has a scheelite structure.In this paper, we also give the X-ray powder diffraction data of Na5Y(WO4)4 obtained by using a D/max-ra type diffractometer.

Influence of structural depth of laser-patterned steel surfaces on the solid lubricity of carbon nanoparticle coatings

Carbon nanoparticle coatings on laser-patterned stainless-steel surfaces present a solid lubrication system where the pattern's recessions act as lubricant-retaining reservoirs.This study investigates the influence of the structural depth of line patterns coated with multi-walled carbon nanotubes(CNTs)and carbon onions(COs)on their respective potential to reduce friction and wear.Direct laser interference patterning(DLIP)with a pulse duration of 12 ps is used to create line patterns with three different structural depths at a periodicity of 3.5μm on AISI 304 steel platelets.Subsequently,electrophoretic deposition(EPD)is applied to form homogeneous carbon nanoparticle coatings on the patterned platelets.Tribological ball-on-disc experiments are conducted on the as-described surfaces with an alumina counter body at a load of 100 mN.The results show that the shallower the coated structure,the lower its coefficient of friction(COF),regardless of the particle type.Thereby,with a minimum of just below 0.20,CNTs reach lower COF values than COs over most of the testing period.The resulting wear tracks are characterized by scanning electron microscopy,transmission electron microscopy,and energy-dispersive X-ray spectroscopy.During friction testing,the CNTs remain in contact,and the immediate proximity,whereas the CO coating is largely removed.Regardless of structural depth,no oxidation occurs on CNT-coated surfaces,whereas minor oxidation is detected on CO-coated wear tracks.