An equivalent continuum method only considering the stretching deformation of struts was used to study the in-plane stiffness and strength of planar lattice grid com- posite materials. The initial yield equations of l...An equivalent continuum method only considering the stretching deformation of struts was used to study the in-plane stiffness and strength of planar lattice grid com- posite materials. The initial yield equations of lattices were deduced. Initial yield surfaces were depicted separately in different 3D and 2D stress spaces. The failure envelope is a polyhedron in 3D spaces and a polygon in 2D spaces. Each plane or line of the failure envelope is corresponding to the yield or buckling of a typical bar row. For lattices with more than three bar rows, subsequent yield of the other bar row after initial yield made the lattice achieve greater limit strength. The importance of the buckling strength of the grids was strengthened while the grids were relative sparse. The integration model of the method was used to study the nonlinear mechanical properties of strain hardening grids. It was shown that the integration equation could accurately model the complete stress-strain curves of the grids within small deformations.展开更多
Lattice Boltzmann method is one of the widely used in multiphase fluid flow.However,the two main disadvantages of this method are the instability of numerical calculations due to the large density ratio of two phases ...Lattice Boltzmann method is one of the widely used in multiphase fluid flow.However,the two main disadvantages of this method are the instability of numerical calculations due to the large density ratio of two phases and impossibility of the temperature distribution to be fed back into the velocity distribution function when the temperature is simulated.Based on the combination prescribed by Inamuro,the large density ratio two-phase flow model and thermal model makes the density ratio of the model simulation to be increased to 2778:1 by optimizing the interface distribution function of two-phase which improves the accuracy of differential format.The phase transition term is added as source term into the distribution function controlling two phase order parameters to describe the temperature effect on the gas-liquid phase transition.The latent heat generated from the phase change is also added as a source term into the temperature distribution function which simulates the movement of the flow under the common coupling of density,velocity,pressure and temperature.The density and the temperature distribution of single bubble are simulated.Comparison of the simulation results with experimental results indicates a good agreement pointing out the effectiveness of the improved model.展开更多
The flow around airfoil NACA0012 enwrapped by the body-fitted grid is simulated by a coupled doubledistribution-function （DDF） lattice Boltzmann method （LBM） for the compressible Navier-Stokes equations. Firstly, ...The flow around airfoil NACA0012 enwrapped by the body-fitted grid is simulated by a coupled doubledistribution-function （DDF） lattice Boltzmann method （LBM） for the compressible Navier-Stokes equations. Firstly, the method is tested by simulating the low Reynolds number flow at Ma =0. 5,a=0. 0, Re=5 000. Then the simulation of flow around the airfoil is carried out at Ma：0. 5, 0. 85, 1.2; a=-0.05, 1.0, 0.0, respectively. And a better result is obtained by using a local refined grid. It reduces the error produced by the grid at Ma=0. 85. Though the inviscid boundary condition is used to avoid the problem of flow transition to turbulence at high Reynolds numbers, the pressure distribution obtained by the simulation agrees well with that of the experimental results. Thus, it proves the reliability of the method and shows its potential for the compressible flow simulation. The suecessful application to the flow around airfoil lays a foundation of the numerical simulation of turbulence.展开更多
The lattice Boltzmann method (LBM) is employed to simulate the uniform flow past a circular cylinder. The performance of the two-dimensional LBM model on the prediction of force coefficients and vortex shedding freque...The lattice Boltzmann method (LBM) is employed to simulate the uniform flow past a circular cylinder. The performance of the two-dimensional LBM model on the prediction of force coefficients and vortex shedding frequency is investigated. The local grid refinement technique and second-order boundary condition for curved walls are applied in the calculations. It is found that the calculated vortex shedding frequency, drag coefficient and lift coefficient are consistent with experimental results at Reynolds nu...展开更多
The Data Platform of Resource and Environment—whose data mainly come from field observation stations,spatial observations,and internet service institutions—is the base of data analysis and model simulation in geosci...The Data Platform of Resource and Environment—whose data mainly come from field observation stations,spatial observations,and internet service institutions—is the base of data analysis and model simulation in geoscience research in China.Among this integrated data platform,the tasks of the data platform of field observation stations are principally data collection,management,assimilation,and share service.Taking into consideration the distributing characteristics of the data sources and the service objects,the authors formulated the framework of the field observation stations' data platform based on the grid technology and designed its operating processes.The authors have further defined and analyzed the key functions and implementing techniques for each module.In a Linux operating system,validation tests for the data platform's function on data replication,data synchronization,and unified data service have been conducted under an environment that of the simulating field stations.展开更多
The standard lattice Boltzmann method utilizes uniform grids to maintain a compact computational procedure. However, it is often less efficient to perform hydrodynamic and aerodynamic flow simulations when there is a ...The standard lattice Boltzmann method utilizes uniform grids to maintain a compact computational procedure. However, it is often less efficient to perform hydrodynamic and aerodynamic flow simulations when there is a need for high resolution. To resolve these difficulties, a multiple nested lattice Boltzmann method(MNLBM) was developed, which contains several overlapped layers with different resolutions in the computational domain. The data transference of flow field on two layers is accomplished by a Filippova procedure which is proved to satisfy the continuity of mass, momentum, and stresses across the interface. The proposed method is based on the standard lattice Boltzmann method, so it is easily performed.By numerical investigation, the result of present method has been agreed with that of literature, but the computation efficiency is higher than the standard lattice Boltzmann method.展开更多
Current delegation mechanism of grid security infrastructure （GSI） can＇t satisfy the requirement of dynamic, distributed and practical security in grid virtual organization. To improve this situation, a TC-enabled ...Current delegation mechanism of grid security infrastructure （GSI） can＇t satisfy the requirement of dynamic, distributed and practical security in grid virtual organization. To improve this situation, a TC-enabled GSI is discussed in this paper. With TC-enabled GSI, a practical delegation solution is proposed in this paper through enforcing fine granularity policy over distributed platforms with the emerging trusted computing technologies. Here trusted platform module is treated as a tamper-resistance module to improve grid security infrastructure. With the implement of Project Daonity, it is demonstrated that the solution could gain dynamic and distributed security in grid environment.展开更多
Digital city is a synthetic project in which large geographic and trade data are involved in, thus data sharing becomes a key problem. Grid GIS is an outcome of integrating GIS and network techniques, it has a lot of ...Digital city is a synthetic project in which large geographic and trade data are involved in, thus data sharing becomes a key problem. Grid GIS is an outcome of integrating GIS and network techniques, it has a lot of characteristic of network technique such as heterogeneous, extensible, dynamic auto-adaptable, the multistage management, etc. The advantages of parallel processing of grid computing are obvious when it is used in basic data platform construction of digital city. The architecture and core techniques of Grid GIS which suitable for constructing basic data platform of digital city was discussed, it has some guidance effects to the city information building.展开更多
In the case of lid-driven deep cavity flow, the effects of different resolutions of local grid refinement have been studied in the frame of multiple relaxation times (MRT) lattice Boltzmann method (LBM). In all the ca...In the case of lid-driven deep cavity flow, the effects of different resolutions of local grid refinement have been studied in the frame of multiple relaxation times (MRT) lattice Boltzmann method (LBM). In all the cases, the aspect ratio and Reynolds number are set as 1.5 and 3.200, respectively. First, the applied method is validated by comparing it with two reported works, with which agreements are reached. Then, six separate degrees of local grid refinement at the upper left corner, i.e. purely coarse grid, including 1/64, 1/32, 1/16, 1/8, 1/4 refinements of the lattice number in the width direction have been studied in detail. The results give the following indications:① The refinement degrees lower than 1/8 produce similar results;② For single corner refinement, 1/4 refinement is adequate for clearing the noises in the singularity zone to a large extent;③ New noise around the interface between coarse and fine zones are introduced by local grid refinement. Finally, refinement of entire subzone neighboring the lid is examined to avoid introducing new noises and it has been found effective.展开更多
基金the China Postdoctoral Science Foundation (20060400465)the National Natural Science Foundation of China (10702033)
文摘An equivalent continuum method only considering the stretching deformation of struts was used to study the in-plane stiffness and strength of planar lattice grid com- posite materials. The initial yield equations of lattices were deduced. Initial yield surfaces were depicted separately in different 3D and 2D stress spaces. The failure envelope is a polyhedron in 3D spaces and a polygon in 2D spaces. Each plane or line of the failure envelope is corresponding to the yield or buckling of a typical bar row. For lattices with more than three bar rows, subsequent yield of the other bar row after initial yield made the lattice achieve greater limit strength. The importance of the buckling strength of the grids was strengthened while the grids were relative sparse. The integration model of the method was used to study the nonlinear mechanical properties of strain hardening grids. It was shown that the integration equation could accurately model the complete stress-strain curves of the grids within small deformations.
基金supported by the National Natural Science Foundation of China (51609131)Shandong Provincial Natural Science Foundation of China (ZR2017MEE031)+1 种基金 Weihai Science and Technology Development Plan (2017GNS18)Shandong Provincial Higher Educational Science and Technology Foundation of China (J16LA61)
文摘Lattice Boltzmann method is one of the widely used in multiphase fluid flow.However,the two main disadvantages of this method are the instability of numerical calculations due to the large density ratio of two phases and impossibility of the temperature distribution to be fed back into the velocity distribution function when the temperature is simulated.Based on the combination prescribed by Inamuro,the large density ratio two-phase flow model and thermal model makes the density ratio of the model simulation to be increased to 2778:1 by optimizing the interface distribution function of two-phase which improves the accuracy of differential format.The phase transition term is added as source term into the distribution function controlling two phase order parameters to describe the temperature effect on the gas-liquid phase transition.The latent heat generated from the phase change is also added as a source term into the temperature distribution function which simulates the movement of the flow under the common coupling of density,velocity,pressure and temperature.The density and the temperature distribution of single bubble are simulated.Comparison of the simulation results with experimental results indicates a good agreement pointing out the effectiveness of the improved model.
基金Supported by the Aeronautical Science Foundation of China(20061453020)Foundation for Basic Research of Northwestern Polytechnical University(03)~~
文摘The flow around airfoil NACA0012 enwrapped by the body-fitted grid is simulated by a coupled doubledistribution-function （DDF） lattice Boltzmann method （LBM） for the compressible Navier-Stokes equations. Firstly, the method is tested by simulating the low Reynolds number flow at Ma =0. 5,a=0. 0, Re=5 000. Then the simulation of flow around the airfoil is carried out at Ma：0. 5, 0. 85, 1.2; a=-0.05, 1.0, 0.0, respectively. And a better result is obtained by using a local refined grid. It reduces the error produced by the grid at Ma=0. 85. Though the inviscid boundary condition is used to avoid the problem of flow transition to turbulence at high Reynolds numbers, the pressure distribution obtained by the simulation agrees well with that of the experimental results. Thus, it proves the reliability of the method and shows its potential for the compressible flow simulation. The suecessful application to the flow around airfoil lays a foundation of the numerical simulation of turbulence.
基金Supported by the Specialized Research Fund for the Doctoral Program of Higher Education (No. 20060056036)
文摘The lattice Boltzmann method (LBM) is employed to simulate the uniform flow past a circular cylinder. The performance of the two-dimensional LBM model on the prediction of force coefficients and vortex shedding frequency is investigated. The local grid refinement technique and second-order boundary condition for curved walls are applied in the calculations. It is found that the calculated vortex shedding frequency, drag coefficient and lift coefficient are consistent with experimental results at Reynolds nu...
基金supported by the Incubation Foundation for Special Disciplines of National Science Foundation of China (NSFC) (grant number: J0630966)Chinese Research Network on Special Environment and Disaster (CRENSED) of Ministry of Science and Technology of the People’s Republic of China (grant number:1Z2005DKA10600)the Knowledge Innovation Important Program of Chinese Academy of Sciences (Grant Number:NF105-SDB-1-21)
文摘The Data Platform of Resource and Environment—whose data mainly come from field observation stations,spatial observations,and internet service institutions—is the base of data analysis and model simulation in geoscience research in China.Among this integrated data platform,the tasks of the data platform of field observation stations are principally data collection,management,assimilation,and share service.Taking into consideration the distributing characteristics of the data sources and the service objects,the authors formulated the framework of the field observation stations' data platform based on the grid technology and designed its operating processes.The authors have further defined and analyzed the key functions and implementing techniques for each module.In a Linux operating system,validation tests for the data platform's function on data replication,data synchronization,and unified data service have been conducted under an environment that of the simulating field stations.
文摘The standard lattice Boltzmann method utilizes uniform grids to maintain a compact computational procedure. However, it is often less efficient to perform hydrodynamic and aerodynamic flow simulations when there is a need for high resolution. To resolve these difficulties, a multiple nested lattice Boltzmann method(MNLBM) was developed, which contains several overlapped layers with different resolutions in the computational domain. The data transference of flow field on two layers is accomplished by a Filippova procedure which is proved to satisfy the continuity of mass, momentum, and stresses across the interface. The proposed method is based on the standard lattice Boltzmann method, so it is easily performed.By numerical investigation, the result of present method has been agreed with that of literature, but the computation efficiency is higher than the standard lattice Boltzmann method.
基金This work is supported in partial by Major State Basic Research Project （No. G19990328, Parallel Computations of the Large-Scale Reservoir Simulation （2003-2004） （Cooperated with China National 0ffshore 0il Corporation）, and National Natural Science Foundation Project （No. 60303020, 2004.1-2006.12）.
基金Supported by the National Natural Science Foun-dation of China (60373087 ,60473023 and 90104005)HP Labo-ratories of China
文摘Current delegation mechanism of grid security infrastructure （GSI） can＇t satisfy the requirement of dynamic, distributed and practical security in grid virtual organization. To improve this situation, a TC-enabled GSI is discussed in this paper. With TC-enabled GSI, a practical delegation solution is proposed in this paper through enforcing fine granularity policy over distributed platforms with the emerging trusted computing technologies. Here trusted platform module is treated as a tamper-resistance module to improve grid security infrastructure. With the implement of Project Daonity, it is demonstrated that the solution could gain dynamic and distributed security in grid environment.
基金This work is supported by the MIC ( Ministry of Information and Communication) , Korea ,under the ITRC(Information Technology Research Center) support program supervised by the IITA (Institute of Information Technology Assess-ment) .
文摘Digital city is a synthetic project in which large geographic and trade data are involved in, thus data sharing becomes a key problem. Grid GIS is an outcome of integrating GIS and network techniques, it has a lot of characteristic of network technique such as heterogeneous, extensible, dynamic auto-adaptable, the multistage management, etc. The advantages of parallel processing of grid computing are obvious when it is used in basic data platform construction of digital city. The architecture and core techniques of Grid GIS which suitable for constructing basic data platform of digital city was discussed, it has some guidance effects to the city information building.
基金Supported by Science and Technology Development Planning of Shandong Province,P.R.China(2016GGX104018)
文摘In the case of lid-driven deep cavity flow, the effects of different resolutions of local grid refinement have been studied in the frame of multiple relaxation times (MRT) lattice Boltzmann method (LBM). In all the cases, the aspect ratio and Reynolds number are set as 1.5 and 3.200, respectively. First, the applied method is validated by comparing it with two reported works, with which agreements are reached. Then, six separate degrees of local grid refinement at the upper left corner, i.e. purely coarse grid, including 1/64, 1/32, 1/16, 1/8, 1/4 refinements of the lattice number in the width direction have been studied in detail. The results give the following indications:① The refinement degrees lower than 1/8 produce similar results;② For single corner refinement, 1/4 refinement is adequate for clearing the noises in the singularity zone to a large extent;③ New noise around the interface between coarse and fine zones are introduced by local grid refinement. Finally, refinement of entire subzone neighboring the lid is examined to avoid introducing new noises and it has been found effective.
