The existence of a compact uniform attractor for a family of processes corre- sponding to the dissipative non-autonomous Klein-Gordon-SchrSdinger lattice dynamical system is proved. An upper bound of the Kolmogorov en...The existence of a compact uniform attractor for a family of processes corre- sponding to the dissipative non-autonomous Klein-Gordon-SchrSdinger lattice dynamical system is proved. An upper bound of the Kolmogorov entropy of the compact uniform attractor is obtained, and an upper semicontinuity of the compact uniform attractor is established.展开更多
This paper studies the evolution of wave in the system of a pure anharmonic lattice with a double well on-site potential by numerical calculation. It finds that an initial distribution of static or moving wave can evo...This paper studies the evolution of wave in the system of a pure anharmonic lattice with a double well on-site potential by numerical calculation. It finds that an initial distribution of static or moving wave can evolve into two travelling soliton-like trains with contrary directions and a region of oscillation in this lattice system. It presents that some cases with cosine-square-shape and Gaussian-shape initial distribution of static or moving wave will produce ordered soliton-like train. Careful numerical observation shows that the centre oscillation region in this system may act as a resource of generating soliton-like train.展开更多
The measurements on temperature dependences of magnetic susceptibility χ(T), specific heat C(T), and electrical resistivity ρ(T) were carried out for the antiferromagnetic(AFM)(Ce(1-x)Lax)2Ir3Ge5(0 ≤ x...The measurements on temperature dependences of magnetic susceptibility χ(T), specific heat C(T), and electrical resistivity ρ(T) were carried out for the antiferromagnetic(AFM)(Ce(1-x)Lax)2Ir3Ge5(0 ≤ x ≤ 0.66) system. It was found that the Neel temperature TNdecreases with increasing La content x, and reaches 0 K near a critical content xcr =0.6. A new phase diagram was constructed based on these measurements. A non-Fermi liquid behavior in ρ(T) and a log T relationship in C(T) were found in the samples near xcr, indicating them to be near an AFM quantum critical point(QCP) with strong spin fluctuation. Our finding indicates that(Ce(1-x)Lax)2Ir3Ge5 may be a new platform to search for unconventional superconductivity.展开更多
In this paper, an upper bound of fractal dimension of the compact kernel sections for the dissipative non-autonomous Klein-Gordon-Schr<span style="white-space:nowrap;">ö</span>dinger lat...In this paper, an upper bound of fractal dimension of the compact kernel sections for the dissipative non-autonomous Klein-Gordon-Schr<span style="white-space:nowrap;">ö</span>dinger lattice system is obtained, by applying a criterion for estimating fractal dimension of a family of compact subsets of a separable Hilbert space.展开更多
The clock operator U and shift operator V are higher-dimensional Pauli operators. Just recently, tighter uncertainty relations with respect to U and V were derived, and we apply them to study the electron localization...The clock operator U and shift operator V are higher-dimensional Pauli operators. Just recently, tighter uncertainty relations with respect to U and V were derived, and we apply them to study the electron localization properties in several typical one-dimensional nonuniform lattice systems. We find that uncertainties △U^2 are less than, equal to, and greater than uncertainties △V^2 for extended, critical, and localized states, respectively. The lower bound LB of the uncertainty relation is relatively large for extended states and small for localized states. Therefore, in combination with traditional quantities,for instance inverse participation ratio, these quantities can be as novel indexes to reflect Anderson localization.展开更多
The staggered mode of solitons in polyacetylene which is first discovered by Sun et al.is one of the typical gap soliton studied in lattice system.Using a one dimensional damped and parametrically driven pendulum latt...The staggered mode of solitons in polyacetylene which is first discovered by Sun et al.is one of the typical gap soliton studied in lattice system.Using a one dimensional damped and parametrically driven pendulum lattice,we have observed a stable staggered mode which can be explained successfully by a nonlinear Schrödinger equation under the multiple scale approximation.展开更多
We considered the longtime behavior of solutions of a coupled lattice dynamical system of Klein-Gordon-Schroedinger equation (KGS lattice system). We first proved the existence of a global attractor for the system c...We considered the longtime behavior of solutions of a coupled lattice dynamical system of Klein-Gordon-Schroedinger equation (KGS lattice system). We first proved the existence of a global attractor for the system considered here by introducing an equivalent norm and using "End Tails" of solutions. Then we estimated the upper bound of the Kolmogorov delta-entropy of the global attractor by applying element decomposition and the covering property of a polyhedron by balls of radii delta in the finite dimensional space. Finally, we presented an approximation to the global attractor by the global attractors of finite-dimensional ordinary differential systems.展开更多
The effect of the number of defect particles on the structure and dispersion relations of a two-dimensional(2D) dust lattice is studied by molecular dynamics(MD) simulation. The dust lattice structures are characteriz...The effect of the number of defect particles on the structure and dispersion relations of a two-dimensional(2D) dust lattice is studied by molecular dynamics(MD) simulation. The dust lattice structures are characterized by particle distribution, nearest neighbor configuration and pair correlation function. The current autocorrelation function, the dispersion relation and sound speed are used to represent the wave properties. The wave propagation of the dust lattice closely relates to the lattice structure. It shows that the number of defect particles can affect the dust lattice local structure and then affect the dispersion relations of waves propagating in it. The presence of defect particles has a greater effect on the transverse waves than on the longitudinal waves of the dust lattice. The appropriate number of defect particles can weaken the anisotropy property of the lattice.展开更多
With the development of industrial activities,global warming has accelerated due to excessive emission of CO_(2).Enhanced Geothermal System(EGS)utilizes deep geothermal heat for power generation.Although porous medium...With the development of industrial activities,global warming has accelerated due to excessive emission of CO_(2).Enhanced Geothermal System(EGS)utilizes deep geothermal heat for power generation.Although porous medium theory is commonly employed to model geothermal reservoirs in EGS,Hot Dry Rock(HDR)presents a challenge as it consists of impermeable granite with zero porosity,potentially distorting the physical interpretation.To address this,the Lattice Boltzmann Method(LBM)is employed to simulate CO_(2)flow within geothermal reservoirs and the Finite Volume Method(FVM)to solve the energy conservation equation for temperature distribution.This combined method of LBM and FVM is imple-mented using MATLAB.The results showed that the Reynolds numbers(Re)of 3,000 and 8,000 lead to higher heat extraction rates from geothermal reservoirs.However,higher Re values may accelerate thermal breakthrough,posing challenges to EGS operation.Meanwhile,non-equilibrium of density in fractures becomes more pronounced during the system's life cycle,with non-Darcy's law becoming significant at Re values of 3,000 and 8,000.Density stratification due to buoyancy effects significantly impacts temperature distribution within geothermal reservoirs,with buoyancy effects at Re=100 under gravitational influence being noteworthy.Larger Re values(3,000 and 8,000)induce stronger forced convection,leading to more uniform density distribution.The addition of proppant negatively affects heat transfer performance in geothermal reservoirs,especially in single fractures.Practical engineering considerations should determine the quantity of proppant through detailed numerical simulations.展开更多
This study presents a method for the inverse analysis of fluid flow problems.The focus is put on accurately determining boundary conditions and characterizing the physical properties of granular media,such as permeabi...This study presents a method for the inverse analysis of fluid flow problems.The focus is put on accurately determining boundary conditions and characterizing the physical properties of granular media,such as permeability,and fluid components,like viscosity.The primary aim is to deduce either constant pressure head or pressure profiles,given the known velocity field at a steady-state flow through a conduit containing obstacles,including walls,spheres,and grains.The lattice Boltzmann method(LBM)combined with automatic differentiation(AD)(AD-LBM)is employed,with the help of the GPU-capable Taichi programming language.A lightweight tape is used to generate gradients for the entire LBM simulation,enabling end-to-end backpropagation.Our AD-LBM approach accurately estimates the boundary conditions for complex flow paths in porous media,leading to observed steady-state velocity fields and deriving macro-scale permeability and fluid viscosity.The method demonstrates significant advantages in terms of prediction accuracy and computational efficiency,making it a powerful tool for solving inverse fluid flow problems in various applications.展开更多
Porous materials present significant advantages for absorbing radioactive isotopes in nuclear waste streams.To improve absorption efficiency in nuclear waste treatment,a thorough understanding of the diffusion-advecti...Porous materials present significant advantages for absorbing radioactive isotopes in nuclear waste streams.To improve absorption efficiency in nuclear waste treatment,a thorough understanding of the diffusion-advection process within porous structures is essential for material design.In this study,we present advancements in the volumetric lattice Boltzmann method(VLBM)for modeling and simulating pore-scale diffusion-advection of radioactive isotopes within geopolymer porous structures.These structures are created using the phase field method(PFM)to precisely control pore architectures.In our VLBM approach,we introduce a concentration field of an isotope seamlessly coupled with the velocity field and solve it by the time evolution of its particle population function.To address the computational intensity inherent in the coupled lattice Boltzmann equations for velocity and concentration fields,we implement graphics processing unit(GPU)parallelization.Validation of the developed model involves examining the flow and diffusion fields in porous structures.Remarkably,good agreement is observed for both the velocity field from VLBM and multiphysics object-oriented simulation environment(MOOSE),and the concentration field from VLBM and the finite difference method(FDM).Furthermore,we investigate the effects of background flow,species diffusivity,and porosity on the diffusion-advection behavior by varying the background flow velocity,diffusion coefficient,and pore volume fraction,respectively.Notably,all three parameters exert an influence on the diffusion-advection process.Increased background flow and diffusivity markedly accelerate the process due to increased advection intensity and enhanced diffusion capability,respectively.Conversely,increasing the porosity has a less significant effect,causing a slight slowdown of the diffusion-advection process due to the expanded pore volume.This comprehensive parametric study provides valuable insights into the kinetics of isotope uptake in porous structures,facilitating the development of porous materials for nuclear waste treatment applications.展开更多
In this paper,an efficient image encryption scheme based on a novel mixed linear–nonlinear coupled map lattice(NMLNCML)system and DNA operations is presented.The proposed NMLNCML system strengthens the chaotic charac...In this paper,an efficient image encryption scheme based on a novel mixed linear–nonlinear coupled map lattice(NMLNCML)system and DNA operations is presented.The proposed NMLNCML system strengthens the chaotic characteristics of the system,and is applicable for image encryption.The main advantages of the proposed method are embodied in its extensive key space;high sensitivity to secret keys;great resistance to chosen-plaintext attack,statistical attack,and differential attack;and good robustness to noise and data loss.Our image cryptosystem adopts the architecture of scrambling,compression,and diffusion.First,a plain image is transformed to a sparsity coefficient matrix by discrete wavelet transform,and plaintext-related Arnold scrambling is performed on the coefficient matrix.Then,semi-tensor product(STP)compressive sensing is employed to compress and encrypt the coefficient matrix.Finally,the compressed coefficient matrix is diffused by DNA random encoding,DNA addition,and bit XOR operation.The NMLNCML system is applied to generate chaotic elements in the STP measurement matrix of compressive sensing and the pseudo-random sequence in DNA operations.An SHA-384 function is used to produce plaintext secret keys and thus makes the proposed encryption algorithm highly sensitive to the original image.Simulation results and performance analyses verify the security and effectiveness of our scheme.展开更多
Lattice structures can be designed to achieve unique mechanical properties and have attracted increasing attention for applications in high-end industrial equipment,along with the advances in additive manufacturing(AM...Lattice structures can be designed to achieve unique mechanical properties and have attracted increasing attention for applications in high-end industrial equipment,along with the advances in additive manufacturing(AM)technologies.In this work,a novel design of plate lattice structures described by a parametric model is proposed to enrich the design space of plate lattice structures with high connectivity suitable for AM processes.The parametric model takes the basic unit of the triple periodic minimal surface(TPMS)lattice as a skeleton and adopts a set of generation parameters to determine the plate lattice structure with different topologies,which takes the advantages of both plate lattices for superior specific mechanical properties and TPMS lattices for high connectivity,and therefore is referred to as a TPMS-like plate lattice(TLPL).Furthermore,a data-driven shape optimization method is proposed to optimize the TLPL structure for maximum mechanical properties with or without the isotropic constraints.In this method,the genetic algorithm for the optimization is utilized for global search capability,and an artificial neural network(ANN)model for individual fitness estimation is integrated for high efficiency.A set of optimized TLPLs at different relative densities are experimentally validated by the selective laser melting(SLM)fabricated samples.It is confirmed that the optimized TLPLs could achieve elastic isotropy and have superior stiffness over other isotropic lattice structures.展开更多
We investigated the one-dimensional diamond ladder in the momentum lattice platform. By inducing multiple twoand four-photon Bragg scatterings among specific momentum states, we achieved a flat band system based on th...We investigated the one-dimensional diamond ladder in the momentum lattice platform. By inducing multiple twoand four-photon Bragg scatterings among specific momentum states, we achieved a flat band system based on the diamond model, precisely controlling the coupling strength and phase between individual lattice sites. Utilizing two lattice sites couplings, we generated a compact localized state associated with the flat band, which remained localized throughout the entire time evolution. We successfully realized the continuous shift of flat bands by adjusting the corresponding nearest neighbor hopping strength, enabling us to observe the complete localization process. This opens avenues for further exploration of more complex properties within flat-band systems, including investigating the robustness of flat-band localized states in disordered flat-band systems and exploring many-body localization in interacting flat-band systems.展开更多
Aqueous Zn-ion batteries(AZIBs)are recognized as a promising energy storage system with intrinsic safety and low cost,but its applications still rely on the design of high-capacity and stable-cycling cathode materials...Aqueous Zn-ion batteries(AZIBs)are recognized as a promising energy storage system with intrinsic safety and low cost,but its applications still rely on the design of high-capacity and stable-cycling cathode materials.In this work,we present an intercalation mechanism-based cathode materials for AZIB,i.e.the vanadium oxide with pre-intercalated manganese ions and lattice water(noted as MVOH).The synergistic effect between Mn^(2+)and lattice H_(2)O not only expands the interlayer spacing,but also significantly enhances the structural stability.Systematic in-situ and ex-situ characterizations clarify the Zn^(2+)/H^(+)co–(de)intercalation mechanism of MVOH in aqueous electrolyte.The demonstrated remarkable structure stability,excellent kinetic behaviors and ion-storage mechanism together enable the MVOH to demonstrate satisfactory specific capacity of 450 mA h g^(−1)at 0.2 A g^(−1),excellent rate performance of 288.8 mA h g^(−1)at 10 A g^(−1)and long cycle life over 20,000 cycles at 5 A g^(−1).This work provides a practical cathode material,and contributes to the understanding of the ion-intercalation mechanism and structural evolution of the vanadium-based cathode for AZIBs.展开更多
High efficiency,cost-effective and durable electrocatalysts are of pivotal importance in energy conversion and storage systems.The electro-oxidation of water to oxygen plays a crucial role in such energy conversion te...High efficiency,cost-effective and durable electrocatalysts are of pivotal importance in energy conversion and storage systems.The electro-oxidation of water to oxygen plays a crucial role in such energy conversion technologies.Herein,we report a robust method for the synthesis of a bimetallic alkoxide for efficient oxygen evolution reaction(OER)for alkaline electrolysis,which yields current density of 10 mA cm^(-2)at an overpotential of 215 mV in 0.1 M KOH electrolyte.The catalyst demonstrates an excellent durability for more than 540 h operation with negligible degradation in activity.Raman spectra revealed that the catalyst underwent structure reconstruction during OER,evolving into oxyhydroxide,which was the active site proceeding OER in alkaline electrolyte.In-situ synchrotron X-ray absorption experiment combined with density functional theory calculation suggests a lattice oxygen involved electrocatalytic reaction mechanism for the in-situ generated nickel–iron bimetal-oxyhydroxide catalyst.This mechanism together with the synergy between nickel and iron are responsible for the enhanced catalytic activity and durability.These findings provide promising strategies for the rational design of nonnoble metal OER catalysts.展开更多
Modern additive manufacturing processes enable fabricating architected cellular materials of complex shape,which can be used for different purposes.Among them,lattice structures are increasingly used in applications r...Modern additive manufacturing processes enable fabricating architected cellular materials of complex shape,which can be used for different purposes.Among them,lattice structures are increasingly used in applications requiring a compromise among lightness and suited mechanical properties,like improved energy absorption capacity and specific stiffness-to-weight and strength-to-weight ratios.A dedicated modeling strategy to assess the energy absorption capacity of lattice structures under uni-axial compression loading is presented in this work.The numerical model is developed in a non-linear framework accounting for the strain rate effect on the mechanical responses of the lattice structure.Four geometries,i.e.,cubic body centered cell,octet cell,rhombic-dodecahedron and truncated cuboctahedron 2+,are investigated.Specifically,the influence of the relative density of the representative volume element of each geometry,the strain-rate dependency of the bulk material and of the presence of the manufacturing process-induced geometrical imperfections on the energy absorption capacity of the lattice structure is investigated.The main outcome of this study points out the importance of correctly integrating geometrical imperfections into the modeling strategy when shock absorption applications are aimed for.展开更多
The study of a droplet spreading on a circular cylinder under gravity was carried out using the pseudo-potential lattice Boltzmann high-density ratios multiphase model with a non-ideal Peng–Robinson equation of state...The study of a droplet spreading on a circular cylinder under gravity was carried out using the pseudo-potential lattice Boltzmann high-density ratios multiphase model with a non-ideal Peng–Robinson equation of state. The calculation results indicate that the motion of the droplet on the cylinder can be divided into three stages: spreading, sliding, and aggregating.The contact length and contact time of a droplet on a cylindrical surface can be affected by factors such as the wettability gradient of the cylindrical wall, the Bond number, and droplet size. Furthermore, phase diagrams showing the relationship between Bond number, cylinder wall wettability gradient, and contact time as well as maximum contact length for three different droplet sizes are given. A theoretical foundation for additional research into the heat and mass transfer process between the droplet and the cylinder can be established by comprehending the variable rules of maximum contact length and contact time.展开更多
Lattice metamaterials based on three-period minimum surface(TPMS)are an effective means to achieve lightweight and high-strength materials which are widely used in various fields such as aerospace and ships.However,it...Lattice metamaterials based on three-period minimum surface(TPMS)are an effective means to achieve lightweight and high-strength materials which are widely used in various fields such as aerospace and ships.However,its vibration and noise reduction,and damping properties have not been fully studied.Therefore,in this study,the TPMS structures with parameterization were designed by the method of surface migration,and the TPMS structures with high forming quality was manufactured by laser powder bed fusion(LPBF).The mechanical properties and energy absorption characteristics of the beam and TPMS structures were studied and compared by quasi-static compression.The modal shapes of the beam lattice structures and TPMS structures were obtained by the free modal analysis,and the damping properties of two structures were obtained by modal tests.For the two structures after heat treatment with the same porosity of 70%,the yield strength of the beam lattice structure reaches 40.76 MPa,elastic modulus is 20.38 GPa,the energy absorption value is 32.23 MJ·m^(-3),the damping ratio is 0.52%.The yield strength,elastic modulus,energy absorption value,and damping ratio of the TPMS structure are 50.74 MPa,25.37 GPa,47.34 MJ·m^(-3),and 0.99%,respectively.The results show that TPMS structures exhibit more excellent mechanical properties and energy absorption,better damping performance,and obvious advantages in structural load and vibration and noise reduction compared with the beam lattice structures under the same porosity.展开更多
基金Project supported by the National Natural Science Foundation of China(No.10771139)the Ph.D. Program of Ministry of Education of China(No.200802700002)+4 种基金the Shanghai Leading Academic Discipline Project(No.S30405)the Innovation Program of Shanghai Municipal Education Commission(No.08ZZ70)the Foundation of Shanghai Talented Persons(No.049)the Leading Academic Discipline Project of Shanghai Normal University(No.DZL707)the Foundation of Shanghai Normal University(No.DYL200803)
文摘The existence of a compact uniform attractor for a family of processes corre- sponding to the dissipative non-autonomous Klein-Gordon-SchrSdinger lattice dynamical system is proved. An upper bound of the Kolmogorov entropy of the compact uniform attractor is obtained, and an upper semicontinuity of the compact uniform attractor is established.
基金Project supported by the Natural Science Foundation of Hunan Province, China (Grant Nos 04JJ3078 and 04JJ6029).
文摘This paper studies the evolution of wave in the system of a pure anharmonic lattice with a double well on-site potential by numerical calculation. It finds that an initial distribution of static or moving wave can evolve into two travelling soliton-like trains with contrary directions and a region of oscillation in this lattice system. It presents that some cases with cosine-square-shape and Gaussian-shape initial distribution of static or moving wave will produce ordered soliton-like train. Careful numerical observation shows that the centre oscillation region in this system may act as a resource of generating soliton-like train.
基金supported by the National Basic Research Program of China(Grant Nos.2016FYA0300402,2015CB921004,and 2012CB821404)the National Natural Science Foundation of China(Grant Nos.11374261 and 11204059)
文摘The measurements on temperature dependences of magnetic susceptibility χ(T), specific heat C(T), and electrical resistivity ρ(T) were carried out for the antiferromagnetic(AFM)(Ce(1-x)Lax)2Ir3Ge5(0 ≤ x ≤ 0.66) system. It was found that the Neel temperature TNdecreases with increasing La content x, and reaches 0 K near a critical content xcr =0.6. A new phase diagram was constructed based on these measurements. A non-Fermi liquid behavior in ρ(T) and a log T relationship in C(T) were found in the samples near xcr, indicating them to be near an AFM quantum critical point(QCP) with strong spin fluctuation. Our finding indicates that(Ce(1-x)Lax)2Ir3Ge5 may be a new platform to search for unconventional superconductivity.
文摘In this paper, an upper bound of fractal dimension of the compact kernel sections for the dissipative non-autonomous Klein-Gordon-Schr<span style="white-space:nowrap;">ö</span>dinger lattice system is obtained, by applying a criterion for estimating fractal dimension of a family of compact subsets of a separable Hilbert space.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61475075 and 61170321)
文摘The clock operator U and shift operator V are higher-dimensional Pauli operators. Just recently, tighter uncertainty relations with respect to U and V were derived, and we apply them to study the electron localization properties in several typical one-dimensional nonuniform lattice systems. We find that uncertainties △U^2 are less than, equal to, and greater than uncertainties △V^2 for extended, critical, and localized states, respectively. The lower bound LB of the uncertainty relation is relatively large for extended states and small for localized states. Therefore, in combination with traditional quantities,for instance inverse participation ratio, these quantities can be as novel indexes to reflect Anderson localization.
基金Supported by the National Natural Science Foundation of Chinathe Natural Science Foundation of Zhejiang Province of China
文摘The staggered mode of solitons in polyacetylene which is first discovered by Sun et al.is one of the typical gap soliton studied in lattice system.Using a one dimensional damped and parametrically driven pendulum lattice,we have observed a stable staggered mode which can be explained successfully by a nonlinear Schrödinger equation under the multiple scale approximation.
基金Project supported by the National Natural Science Foundation of China (No.10471086)Specialized Research Fund for the Doctoral Program of Xiangtan University (No.06QDZ07)
文摘We considered the longtime behavior of solutions of a coupled lattice dynamical system of Klein-Gordon-Schroedinger equation (KGS lattice system). We first proved the existence of a global attractor for the system considered here by introducing an equivalent norm and using "End Tails" of solutions. Then we estimated the upper bound of the Kolmogorov delta-entropy of the global attractor by applying element decomposition and the covering property of a polyhedron by balls of radii delta in the finite dimensional space. Finally, we presented an approximation to the global attractor by the global attractors of finite-dimensional ordinary differential systems.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 12075315 and 11675261)。
文摘The effect of the number of defect particles on the structure and dispersion relations of a two-dimensional(2D) dust lattice is studied by molecular dynamics(MD) simulation. The dust lattice structures are characterized by particle distribution, nearest neighbor configuration and pair correlation function. The current autocorrelation function, the dispersion relation and sound speed are used to represent the wave properties. The wave propagation of the dust lattice closely relates to the lattice structure. It shows that the number of defect particles can affect the dust lattice local structure and then affect the dispersion relations of waves propagating in it. The presence of defect particles has a greater effect on the transverse waves than on the longitudinal waves of the dust lattice. The appropriate number of defect particles can weaken the anisotropy property of the lattice.
基金supported by the Hebei Province Graduate Innovation Funding Project(CXZZBS2022029).
文摘With the development of industrial activities,global warming has accelerated due to excessive emission of CO_(2).Enhanced Geothermal System(EGS)utilizes deep geothermal heat for power generation.Although porous medium theory is commonly employed to model geothermal reservoirs in EGS,Hot Dry Rock(HDR)presents a challenge as it consists of impermeable granite with zero porosity,potentially distorting the physical interpretation.To address this,the Lattice Boltzmann Method(LBM)is employed to simulate CO_(2)flow within geothermal reservoirs and the Finite Volume Method(FVM)to solve the energy conservation equation for temperature distribution.This combined method of LBM and FVM is imple-mented using MATLAB.The results showed that the Reynolds numbers(Re)of 3,000 and 8,000 lead to higher heat extraction rates from geothermal reservoirs.However,higher Re values may accelerate thermal breakthrough,posing challenges to EGS operation.Meanwhile,non-equilibrium of density in fractures becomes more pronounced during the system's life cycle,with non-Darcy's law becoming significant at Re values of 3,000 and 8,000.Density stratification due to buoyancy effects significantly impacts temperature distribution within geothermal reservoirs,with buoyancy effects at Re=100 under gravitational influence being noteworthy.Larger Re values(3,000 and 8,000)induce stronger forced convection,leading to more uniform density distribution.The addition of proppant negatively affects heat transfer performance in geothermal reservoirs,especially in single fractures.Practical engineering considerations should determine the quantity of proppant through detailed numerical simulations.
文摘This study presents a method for the inverse analysis of fluid flow problems.The focus is put on accurately determining boundary conditions and characterizing the physical properties of granular media,such as permeability,and fluid components,like viscosity.The primary aim is to deduce either constant pressure head or pressure profiles,given the known velocity field at a steady-state flow through a conduit containing obstacles,including walls,spheres,and grains.The lattice Boltzmann method(LBM)combined with automatic differentiation(AD)(AD-LBM)is employed,with the help of the GPU-capable Taichi programming language.A lightweight tape is used to generate gradients for the entire LBM simulation,enabling end-to-end backpropagation.Our AD-LBM approach accurately estimates the boundary conditions for complex flow paths in porous media,leading to observed steady-state velocity fields and deriving macro-scale permeability and fluid viscosity.The method demonstrates significant advantages in terms of prediction accuracy and computational efficiency,making it a powerful tool for solving inverse fluid flow problems in various applications.
基金supported as part of the Center for Hierarchical Waste Form Materials,an Energy Frontier Research Center funded by the U.S.Department of Energy,Office of Science,Basic Energy Sciences under Award No.DE-SC0016574.
文摘Porous materials present significant advantages for absorbing radioactive isotopes in nuclear waste streams.To improve absorption efficiency in nuclear waste treatment,a thorough understanding of the diffusion-advection process within porous structures is essential for material design.In this study,we present advancements in the volumetric lattice Boltzmann method(VLBM)for modeling and simulating pore-scale diffusion-advection of radioactive isotopes within geopolymer porous structures.These structures are created using the phase field method(PFM)to precisely control pore architectures.In our VLBM approach,we introduce a concentration field of an isotope seamlessly coupled with the velocity field and solve it by the time evolution of its particle population function.To address the computational intensity inherent in the coupled lattice Boltzmann equations for velocity and concentration fields,we implement graphics processing unit(GPU)parallelization.Validation of the developed model involves examining the flow and diffusion fields in porous structures.Remarkably,good agreement is observed for both the velocity field from VLBM and multiphysics object-oriented simulation environment(MOOSE),and the concentration field from VLBM and the finite difference method(FDM).Furthermore,we investigate the effects of background flow,species diffusivity,and porosity on the diffusion-advection behavior by varying the background flow velocity,diffusion coefficient,and pore volume fraction,respectively.Notably,all three parameters exert an influence on the diffusion-advection process.Increased background flow and diffusivity markedly accelerate the process due to increased advection intensity and enhanced diffusion capability,respectively.Conversely,increasing the porosity has a less significant effect,causing a slight slowdown of the diffusion-advection process due to the expanded pore volume.This comprehensive parametric study provides valuable insights into the kinetics of isotope uptake in porous structures,facilitating the development of porous materials for nuclear waste treatment applications.
基金supported by the National Natural Science Foundation of China(Nos.11901297 and 61973078)。
文摘In this paper,an efficient image encryption scheme based on a novel mixed linear–nonlinear coupled map lattice(NMLNCML)system and DNA operations is presented.The proposed NMLNCML system strengthens the chaotic characteristics of the system,and is applicable for image encryption.The main advantages of the proposed method are embodied in its extensive key space;high sensitivity to secret keys;great resistance to chosen-plaintext attack,statistical attack,and differential attack;and good robustness to noise and data loss.Our image cryptosystem adopts the architecture of scrambling,compression,and diffusion.First,a plain image is transformed to a sparsity coefficient matrix by discrete wavelet transform,and plaintext-related Arnold scrambling is performed on the coefficient matrix.Then,semi-tensor product(STP)compressive sensing is employed to compress and encrypt the coefficient matrix.Finally,the compressed coefficient matrix is diffused by DNA random encoding,DNA addition,and bit XOR operation.The NMLNCML system is applied to generate chaotic elements in the STP measurement matrix of compressive sensing and the pseudo-random sequence in DNA operations.An SHA-384 function is used to produce plaintext secret keys and thus makes the proposed encryption algorithm highly sensitive to the original image.Simulation results and performance analyses verify the security and effectiveness of our scheme.
基金Project supported by the National Natural Science Foundation of China (No.11972086)。
文摘Lattice structures can be designed to achieve unique mechanical properties and have attracted increasing attention for applications in high-end industrial equipment,along with the advances in additive manufacturing(AM)technologies.In this work,a novel design of plate lattice structures described by a parametric model is proposed to enrich the design space of plate lattice structures with high connectivity suitable for AM processes.The parametric model takes the basic unit of the triple periodic minimal surface(TPMS)lattice as a skeleton and adopts a set of generation parameters to determine the plate lattice structure with different topologies,which takes the advantages of both plate lattices for superior specific mechanical properties and TPMS lattices for high connectivity,and therefore is referred to as a TPMS-like plate lattice(TLPL).Furthermore,a data-driven shape optimization method is proposed to optimize the TLPL structure for maximum mechanical properties with or without the isotropic constraints.In this method,the genetic algorithm for the optimization is utilized for global search capability,and an artificial neural network(ANN)model for individual fitness estimation is integrated for high efficiency.A set of optimized TLPLs at different relative densities are experimentally validated by the selective laser melting(SLM)fabricated samples.It is confirmed that the optimized TLPLs could achieve elastic isotropy and have superior stiffness over other isotropic lattice structures.
基金Project supported by the National Natural Science Foundation of China (Grant No.12074367)Anhui Initiative in Quantum Information Technologies,the National Key Research and Development Program of China (Grant No.2020YFA0309804)+3 种基金Shanghai Municipal Science and Technology Major Project (Grant No.2019SHZDZX01)the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No.XDB35020200)Innovation Program for Quantum Science and Technology (Grant No.2021ZD0302002)New Cornerstone Science Foundation。
文摘We investigated the one-dimensional diamond ladder in the momentum lattice platform. By inducing multiple twoand four-photon Bragg scatterings among specific momentum states, we achieved a flat band system based on the diamond model, precisely controlling the coupling strength and phase between individual lattice sites. Utilizing two lattice sites couplings, we generated a compact localized state associated with the flat band, which remained localized throughout the entire time evolution. We successfully realized the continuous shift of flat bands by adjusting the corresponding nearest neighbor hopping strength, enabling us to observe the complete localization process. This opens avenues for further exploration of more complex properties within flat-band systems, including investigating the robustness of flat-band localized states in disordered flat-band systems and exploring many-body localization in interacting flat-band systems.
基金supported by the grants from the Chinese Academy of Sciences(124GJHZ2023031MI)the National Natural Science Foundation of China(52173274)+1 种基金the National Key R&D Project from the Ministry of Science and Technology(2021YFA1201603)the Fundamental Research Funds for the Central Universities.
文摘Aqueous Zn-ion batteries(AZIBs)are recognized as a promising energy storage system with intrinsic safety and low cost,but its applications still rely on the design of high-capacity and stable-cycling cathode materials.In this work,we present an intercalation mechanism-based cathode materials for AZIB,i.e.the vanadium oxide with pre-intercalated manganese ions and lattice water(noted as MVOH).The synergistic effect between Mn^(2+)and lattice H_(2)O not only expands the interlayer spacing,but also significantly enhances the structural stability.Systematic in-situ and ex-situ characterizations clarify the Zn^(2+)/H^(+)co–(de)intercalation mechanism of MVOH in aqueous electrolyte.The demonstrated remarkable structure stability,excellent kinetic behaviors and ion-storage mechanism together enable the MVOH to demonstrate satisfactory specific capacity of 450 mA h g^(−1)at 0.2 A g^(−1),excellent rate performance of 288.8 mA h g^(−1)at 10 A g^(−1)and long cycle life over 20,000 cycles at 5 A g^(−1).This work provides a practical cathode material,and contributes to the understanding of the ion-intercalation mechanism and structural evolution of the vanadium-based cathode for AZIBs.
基金the staff at Beamline (BL08U1-A and BL11B)of the Shanghai Synchrotron Radiation Facility (SSRF)the support from the National Key Research&Development Program of China (2022YFB3803700)+2 种基金the National Natural Science Foundation of China (52171186)the support through the Overseas Outstanding Youth Fund and Shanghai Pujiang Talent Project (21PJ1408500)the financial support from the Center of Hydrogen Science,Shanghai Jiao Tong University。
文摘High efficiency,cost-effective and durable electrocatalysts are of pivotal importance in energy conversion and storage systems.The electro-oxidation of water to oxygen plays a crucial role in such energy conversion technologies.Herein,we report a robust method for the synthesis of a bimetallic alkoxide for efficient oxygen evolution reaction(OER)for alkaline electrolysis,which yields current density of 10 mA cm^(-2)at an overpotential of 215 mV in 0.1 M KOH electrolyte.The catalyst demonstrates an excellent durability for more than 540 h operation with negligible degradation in activity.Raman spectra revealed that the catalyst underwent structure reconstruction during OER,evolving into oxyhydroxide,which was the active site proceeding OER in alkaline electrolyte.In-situ synchrotron X-ray absorption experiment combined with density functional theory calculation suggests a lattice oxygen involved electrocatalytic reaction mechanism for the in-situ generated nickel–iron bimetal-oxyhydroxide catalyst.This mechanism together with the synergy between nickel and iron are responsible for the enhanced catalytic activity and durability.These findings provide promising strategies for the rational design of nonnoble metal OER catalysts.
文摘Modern additive manufacturing processes enable fabricating architected cellular materials of complex shape,which can be used for different purposes.Among them,lattice structures are increasingly used in applications requiring a compromise among lightness and suited mechanical properties,like improved energy absorption capacity and specific stiffness-to-weight and strength-to-weight ratios.A dedicated modeling strategy to assess the energy absorption capacity of lattice structures under uni-axial compression loading is presented in this work.The numerical model is developed in a non-linear framework accounting for the strain rate effect on the mechanical responses of the lattice structure.Four geometries,i.e.,cubic body centered cell,octet cell,rhombic-dodecahedron and truncated cuboctahedron 2+,are investigated.Specifically,the influence of the relative density of the representative volume element of each geometry,the strain-rate dependency of the bulk material and of the presence of the manufacturing process-induced geometrical imperfections on the energy absorption capacity of the lattice structure is investigated.The main outcome of this study points out the importance of correctly integrating geometrical imperfections into the modeling strategy when shock absorption applications are aimed for.
文摘The study of a droplet spreading on a circular cylinder under gravity was carried out using the pseudo-potential lattice Boltzmann high-density ratios multiphase model with a non-ideal Peng–Robinson equation of state. The calculation results indicate that the motion of the droplet on the cylinder can be divided into three stages: spreading, sliding, and aggregating.The contact length and contact time of a droplet on a cylindrical surface can be affected by factors such as the wettability gradient of the cylindrical wall, the Bond number, and droplet size. Furthermore, phase diagrams showing the relationship between Bond number, cylinder wall wettability gradient, and contact time as well as maximum contact length for three different droplet sizes are given. A theoretical foundation for additional research into the heat and mass transfer process between the droplet and the cylinder can be established by comprehending the variable rules of maximum contact length and contact time.
基金financially supported by the Liaoning Province Applied Fundamental Research Program(No.2023JH2/101700039)Liaoning Province Natural Science Foundation(No.2023-MSLH-328)。
文摘Lattice metamaterials based on three-period minimum surface(TPMS)are an effective means to achieve lightweight and high-strength materials which are widely used in various fields such as aerospace and ships.However,its vibration and noise reduction,and damping properties have not been fully studied.Therefore,in this study,the TPMS structures with parameterization were designed by the method of surface migration,and the TPMS structures with high forming quality was manufactured by laser powder bed fusion(LPBF).The mechanical properties and energy absorption characteristics of the beam and TPMS structures were studied and compared by quasi-static compression.The modal shapes of the beam lattice structures and TPMS structures were obtained by the free modal analysis,and the damping properties of two structures were obtained by modal tests.For the two structures after heat treatment with the same porosity of 70%,the yield strength of the beam lattice structure reaches 40.76 MPa,elastic modulus is 20.38 GPa,the energy absorption value is 32.23 MJ·m^(-3),the damping ratio is 0.52%.The yield strength,elastic modulus,energy absorption value,and damping ratio of the TPMS structure are 50.74 MPa,25.37 GPa,47.34 MJ·m^(-3),and 0.99%,respectively.The results show that TPMS structures exhibit more excellent mechanical properties and energy absorption,better damping performance,and obvious advantages in structural load and vibration and noise reduction compared with the beam lattice structures under the same porosity.