Coupling characteristics of stress and strain at different layers of different sub-regions in Yunnan and its adjacent areas

In this paper, we collect 6 361 waveform data to calculate the shear wave splitting parameters from a regional seismic network of 22 digital stations in Yunnan and its adjacent area from July 1999 to June 2005. By using the cross-correlation method, 64 splitting events of 16 stations are processed. We also collect the splitting results of eight earthquake sequences to present the characteristics of shear wave splitting in Yunnan and its adjacent areas. The orientations of maximum principal compressive stress of three sub-regions in this area are derived from the CMT focal mechanism solutions of 43 moderate-strong earthquakes provided by Harvard University by the P axis azimuth-averaging method. The principal strain rate at each observatory is deduced from the observations of Crustal Movement Observation Network of China during the period from 1999 to 2004. In addition, the data of Pn aniso- tropy and SKS splitting of Yunnan and its adjacent areas are also collected. We have discovered from this study that the continental lithosphere, as a main seismogenic environment for strong earthquake, can be divided into blocks laterally; the mechanical behavior of lithosphere varies with depth and can be divided into different layers in the vertical orientation; the information of crustal deformation obtained from GPS might be affected by the type of blocks, since there are different types of active blocks in Yunnan and its adjacent areas; the shear wave splitting in this region might be affected mainly by the upper crust or even the surface tectonics.

Numerical investigations of asymmetric flow of a micropolar fluid between two porous disks

Numerical solution is presented for the two- dimensional flow of a micropolar fluid between two porous coaxial disks of different permeability for a range of Reynolds number Re （-300≤ Re 〈 0） and permeability parameter A （1.0≤A ≤2.0）. The main flow is superimposed by the injection at the surfaces of the two disks. Von Karman＇s similarity transformations are used to reduce the governing equations of motion to a set of non-linear coupled ordinary differential equations （ODEs） in dimensionless form. An algorithm based on the finite difference method is employed to solve these ODEs and Richardson＇s extrapolation is used to obtain higher order accuracy. The results indicate that the parameters Re and A have a strong influence on the velocity and microrotation profiles, shear stresses at the disks and the position of the viscous/shear layer. The micropolar material constants cl, c2, c3 have profound effect on microrotation as compared to their effect on streamwise and axial velocity profiles. The results of micropolar fluids are compared with the results for Newtonian fluids.

ON THE FINITE DIFFERENCE METHODS FOR TWO DIMENSIONAL TURBULENCE BOUNDARY LAYER

In this paper,the author first establishes the general finite difference formula for the governing equations of the turbulent average velocities in a steady two dimensional incompressible fluid boundary layer-inner layer.Next, three key parameters of the difference scheme are determined respectively by several simple flow models with known analytical solutions.Finally a special five points difference system is given and its application value is showed by a numerical example for the vertical velocity distribution in an Ekman's layer.

Comparison of Soil Moisture in Different Soil Layers between Three Typical Forests in the Upper Reaches of Lijiang River Basin, Southern China

Throughfall, stemflow, evapotranspiration and infiltration are likely to vary with forest types, and consequently affect soil moisture regimes in different soil layers. In this study, the spatial and temporal characteristics of soil moisture were investigated to understand variations in soil moisture in three typical forests, including Phyllostachys pubescens forest (abbreviated as PPF), Schima superba forest (abbreviated as SSF) and Cunninghamia lanceolata forest (abbreviated as CLF) in the upper reaches of Lijiang River basin in southern China. The results showed that,(1) Litterfall and soil physical properties differed significantly in the three typical forests. Infiltration capacity in SSF was more favorable to soil moisture than in PPF and CLF.(2) Large variations were found in soil moisture at different forest stands and depths. Due to complicated vertical structures, there were obvious differences in soil moisture from the 0-20 cm soil layer to the 50-80 cm soil layer.(3) Average soil moisture in each layer was higher in SSF than in PPF and CLF.(4) Soil moisture in different layers correlated closely with precipitation (P<0.01) and the three typical forests had the same change trends with rainfall during the studying period.(5) In topsoil, soil moisture was influe need by soil properties which were mostly determined by litterfall, while in deep soil, soil moisture was affected by variations of soil characteristics, which were mostly determined by root distribution. This study provides a scie ntific basis for better un dersta nding the relati on ships betwee n forest vegetati on and its hydrological effects, helping to facilitate water resources conservation and achieving wise forest management in the upper reaches of Lijiang River basin.

Variations in mesenchymal-epithelial transition-related transcription factors during reprogramming of somatic cells from different germ layers into iPSCs

Introducing a combination of transcription factors such as Oct4,Sox2,Klf4 and c-Myc（OSKM）enables reprogramming which converts somatic cells into induced pluripotent stem cells（i PSCs）（Takahashi and Yamanaka,2006）.i PSCs play an important role in clinical and regenerative medicine because they can be utilized to model a specific disease or differentiate into functional cells for transplantation.Enhancing the efficiency of induction and improving the qualities of iPSCs are constant themes in this field.

VARIABLE MESH FINITE DIFFERENCE METHOD FOR SELF-ADJOINT SINGULARLY PERTURBED TWO-POINT BOUNDARY VALUE PROBLEMS

A numerical method based on finite difference method with variable mesh is given for self-adjoint singularly perturbed two-point boundary value problems. To obtain parameter- uniform convergence, a variable mesh is constructed, which is dense in the boundary layer region and coarse in the outer region. The uniform convergence analysis of the method is discussed. The original problem is reduced to its normal form and the reduced problem is solved by finite difference method taking variable mesh. To support the efficiency of the method, several numerical examples have been considered.

Seed and Wasp Production in the Mutualism of Figs and Fig Wasps

Figs (Moracea: Ficus) and fig wasps (Hymenoptera: Chlocloids: Agaonideae) depend on each other to complete their reproduction. Monoecious fig species and their pollinating wasps are in conflict over the use of fig ovaries which can either produce one seed or one wasp. From observation on Ficus virens Ait., we showed that female flowers with outer layer of ovaries (near to the wall of syconium) had no significant difference from that with inner and interval layer of ovaries (near to the syconium cavity), in which most seeds and wasps were produced. This meant that fig tree provided the same potential resource for seed and wasps production. Observation indicated that there was usually only one foundress in syconium at female flower phase and no com- petition pollinators. Measurement of the style length of female flowers and the ovipositor of pollinators indicated that most ovaries could be reached by pollinator’s ovipositor. However, at the male flower phase, production of seeds was significantly more than that of wasps including non-pollinating wasps but there was no significant difference between seed and pollinating wasp production when without non-pollinating wasps produced. This result indicated that non-pollinating wasps competed ovaries not with seeds but with pollinating wasps for ovipositing. Bagged experiment showed that the sampling fig species was not self-sterile which was important for figs and wasps to survive bad season. Seed production in self-pollinated figs was not significantly different from total wasps in- cluding non-pollinating ones. This might be related with the weaker competition among wasps since bagged figs were not easy to reach by wasps from outside.