Monodisperse Ultra-Large-Pore Silica Coated Polystyrene Core-Shell Microbeads via Layer-by-Layer Assembly for Nano-Micro Composite

Polystyrene （PS） @SiO2 core-shell microbeads with large pore and large particle size were prepared via layer-by-layer（LBL）assembly technique for potential applications in nano-micro composites. Negative silica nanoparticles synthesized via modified St6ber method and cationic poly （diallyldimethylammonium chloride） were alternately adsorbed on the surface of microbeads. Zeta potential, size, and morphology of the microbeads were monitored during LBL assembly process to ensure the successful deposition of silica nanoparticles. The porous shell was characterized using nitrogen adsorption and desorption analyses, and the surface area, volume and diame- ter of the pores were derived. It is found that the porous shell thickness and the pore size can be tuned by changing the coating times of silica nanoparticles. Finally, PS@SiO2 core-shell microbeads with 5 grn PS solid core and 350 nm mesoporous shell （mean BJH pore diameter is ~27 nm） were used to load CdSe/ZnS quantum dots （QDs）. The fluorescence microscopic image and the optical amplification of the QDs-embedded microbeads （QDBs） indicate that the as-prepared core-shell microbeads can provide adequate space for QDs and may be useful for further application of nano-micro composites.

Novel layer-by-layer assembly of rGO-hybridised ZnO sandwich thin films for the improvement of photo-catalysed hydrogen production

Metal oxide semiconductor materials such as ZnO have tremendous potential as light absorbers for photocatalysed electrodes in the electrochemical reduction of water. Promoters such as rGO have been added to reduce the recombination losses of charge carriers and improve its photoelectrochemical activity. In this study, the effect of layer ordering on the charge transfer properties of rGO-hybridised ZnO sandwich thin films for the photo-catalysed electrochemical reduction of water was investigated. rGO-hybridised ZnO sandwich thin films were prepared via a facile electrode position technique using a layer-by-layer approach. The thin films were analysed using FESEM, XRD, Raman, PL, UV–vis, EIS and CV techniques to investigate its morphological, optical and electrochemical properties. The FESEM images show the formation of distinct layers of rGO and ZnO nanorods/flakes via the layer-by-layer method. XRD confirmed the wurtzite structure of ZnO. PL spectroscopy revealed a reduction of photoemission intensity in the visible region（580 nm） when rGO was incorporated into the ZnO thin film. Among the six thin films prepared, ZnO/rGO showed superior performance compared to the other thin films（0.964 m A/cm） due to the presence of graphene edges which participate as heterogenous electrocatalysts in the photocatalysed electrolysis of water. rGO also acts as electron acceptor, forming an n-p heterojunction which improves the activity of ZnO to oxidise water molecules to O2. EIS revealed that the application of rGO as back contact（rGO/ZnO, rGO/ZnO/rGO） reduces the charge transfer resistance of a semiconductor thin film. Alternatively, rGO as front contact（ZnO/rGO, rGO/ZnO/rGO） improves the photo-catalysed electrolysis of water through the participation of the rGO edges in the chemical activation of water. The findings from this study indicate that the layer ordering significantly affects the thin film＇s electrostatic properties and this understanding can be further advantageous for tunable applications.

Gradient nanoporous phenolics as substrates for high-flux nanofiltration membranes by layer-by-layer assembly of polyelectrolytes

Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly permeable gradient phenolic membranes with tight selectivity are used as substrates to prepare TFC membranes with high permeances by the layer-by-layer assembly method. The negatively charged phenolic substrates are alternately assembled with polycation polyethylenimine(PEI) and polyanion poly(acrylic acid)(PAA)as a result of electrostatic interactions, forming thin and compact PEI/PAA layers tightly attached to the substrate surface. Benefiting from the high permeances and tight surface pores of the gradient nanoporous structures of the substrates, the produced PEI/PAA membranes exhibit a permeance up to 506 L? m-2?h-1?MPa-1, which is ~2–10 times higher than that of other membranes with similar rejections. The PEI/PAA membranes are capable of retaining N 96.1% of negatively charged dyes following the mechanism of electrostatic repulsion. We demonstrate that the membranes can also separate positively and neutrally charged dyes from water via other mechanisms.This work opens a new avenue for the design and preparation of high-flux NF membranes, which is also applicable to enhance the permeance of other TFC membranes.

Layer-by-layer assembly of nanocomposite films with thickness up to hundreds of nanometers

Polyelectrolyte/polyelectrolyte, organic molecule/colloidal CdS and polyelectrolyte/MWCNT films were fabricated via the layer-by-layer assembling technique. The assembled films were characterized by UV-vis spectrophotometer, X-ray diffractometry, nano profilometer and scanning electron microscopy. The results demonstrate that the layer-by-layer assembling technique can be used to make the nanoscaled films from polyelectrolytes and thicker composite films from suitable precursor materials. Both organic molecule/colloidal CdS films and PEI/MWCNT films with thickness of hundreds of nanometers were obtained. For the organic molecule/colloidal CdS films, a reasonable explanation for the result is that both the organic molecules and the CdS particles aggregate in the films. For the PEI/MWCNT films, obviously, it is the MWCNT that makes the great contribution to the film thickness.

Layer-by-layer electrostatic selfassembly of anionic and cationic carbon nanotubes

The layer-by-layer(LBL) self assembly of anionic and cationic multi-walled carbon nanotubes(MWNTs) through electrostatic interaction has been carried out to fabricate all-MWNT multilayer films.The alternate uniform assembly of anionic and cationic MWNTs was investigated by UV-vis spectroscopy.Scanning electron microscopy(SEM) images displayed the growth of the MWNT films.

Strengthened graphene oxide/diazoresin multilayer composites from layer-by-layer assembly and cross-linking

The layer-by-layer assembly of graphene oxide and diazoresin is carried out via the electrostatic and hydrogen bond interactions on planar substrates and colloidal templates.The successful planar and spherical growth of multilayer could be investigated by UV-vis spectrophotometry and scanning electron microscopy,respectively.Subsequent UV irradiation or heating would convert the ionic bonds and hydrogen bonds to covalent bands,which significantly improves the stability of the multilayer composite against solvent etching.For the cross-linked core-shell composites,the template cores could be removed by dissolution and hollow microspheres are obtained.

NEAR INFRARED ELECTROCHROMIC VARIABLE OPTICAL ATTENUATOR FABRICATED BY LAYER-BY-LAYER ASSEMBLY

An eleetrochromic variable optical attenuator （ECVOA） was fabricated by layer-by-layer （LBL） assembly of disodium N,N-bis（p-sulfonatophenyl）naphthalenedicarboximide （Naph-SO3Na） and common cationic polymer poly（diallyldimethylammonium） chloride （PDDA）. The UV-Vis absorption spectra of the multilayer films revealed that approximately an equal amount of Naph-SO3Na was assembled in each deposition cycle. Upon one-electron reduction, multilayer films exhibited intense absorption around 452 nm and also a broad absorption band from 1200 nm to 1900 nm. Owing to the improved ionic conductivity, the optical attenuation at 1550 nm of the films showed rapid response time and reached 1.3 dB/μm within 5 s. These results indicate that layer-by-layer assembly could be an effective method for the preparation of ECVOA operating in near infrared region.

Self-Assembled Film of Tb^(3+) and Poly(3- Thiophene Acetic Acid) via Layer-by-Layer Complexation Technique and Its Photoluminescence

The layer by layer complexation technique of polymer and metal ion was successfully utilized to fabricate the ultrathin multilayer film of poly(3 thiophene acetic acid (PTAA) and Tb 3+ ion by dipping the substrates alternatively in polymer and Tb 3+ ion aqueous solutions. UV-vis measurement revealed that the absorbance has linearity with the bilayer number from layer to layer and the X ray photoelectron spectrum (XPS) confirmed the existence of Tb 3+ ion. The pH of both the polymer and TbCl 3 solutions influence the thickness dramatically while the concentration of the solutions is not so sensitive. The luminescent spectrum of the complex film shows the characteristic emission of Tb 3+ ion as well as the ligand indicating the formation of the complex.

BASE-INDUCED RELEASE OF MOLECULES FROM HYDROGEN BONDING DIRECTED LAYER-BY-LAYER FILM

On the basis of hydrogen bonding directed layer-by-layer (LbL) assembly we have fabricated two multilayersystems, poly(acrylic acid) bearng spironaphthoxazine (PAA-SO)/poly(4-vinylpyridine) and carboxyl-terminated polyetherdendrimer (dendrimer-COOH)/poly(4-vinylpyridine). UV-Vis spectroscopy indicates that either PAA-SO or dendrimer-COOH can be released from the corresponding multilayer assemblies upon immerssion in a basic aqueous solution.Furthermore, the rate of molecule release can be controlled either by changing the pH value or by adjusting the layerstructure.

Layer-By-Layer技术构建化学传感器酶电极检测水体中有机磷的研究

基于层层累积自组装法将胆碱氧化酶和胆碱酯酶逐层固定在电极表面，制备了电流型水质有机磷检测化学传感器。讨论了自组装膜层数、pH值、温度对传感器电流响应的影响。制备的化学传感器对有机磷在浓度10^-9～10^-5mol／L呈良好的线性响应，检出限为1×10^-10mol／L。传感器的稳定性好，30天时的响应值仍保持90％。

Preparation of Au/Ag Multilayers via Layer-by-Layer Self-assembly in Spherical Polyelectrolyte Brushes and Their Catalytic Activity

Spherical polyelectrolyte brushes （SPBs） consisting of polystyrene （PS） core and poly（2-aminoethyl methacrylate hydrochloride） （PAEMH） shell were prepared by photo-emulsion polymerization. Au nanoparticles （Au-NPs） with controlled size and size distribution were synthesized in situ using SPBs as nanoreactors. Via layer-by-layer deposition technique on the surface of SPBs, nano-composite particles with Au/Ag-NPs bilayer and Au/Ag/Au-NPs trilayer were prepared. The structures of the as-prepared Au/Ag multilayer SPBs were characterized by UV-Vis spectroscopy, TEM, ICP-AES and DLS. The charge reversal of the nano-composite particles observed by zeta potential confirmed the success of layer-by-layer assembly. The Au/Ag-NPs bilayer nano-composite particles showed high catalytic efficiency with an apparent activation energy of about 41.2 kJ/mol in the reduction reaction of 4-nitrophenol to 4-aminophenol in the existence of sodium borohydride monitored. The catalytic activity ofAu/Ag-NPs multilayer SPBs close to that of Au-NPs SPBs and much higher than that of Ag-NPs SPBs reveals its potential applications in cost-effective catalysts with high-performance.

Surface modification of polypropylene non-woven fibers with TiO_2 nanoparticles via layer-by-layer self assembly method:Preparation and photocatalytic activity

Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic acid）（PSS） and poly（diallyl-dimethylammonium chloride）（PDADMAC） to improve the anchoring of the Ti O2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic Ti O2 nanoparticles to construct Ti O2/PDADMAC bilayer in the Lb L fashion. The number of deposited Ti O2/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust Ti O2 loading. The Lb L technique showed higher Ti O2 loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue（MB）. Results showed that the Ti O2 modified fibers exhibited excellent photocatalytic activity efficiency similar to that of Ti O2 powder dispersed in solution. The deposition of Ti O23 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr.Ti O2-Lb L constructions also preserved Ti O2 adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of Ti O2 particles from the substrate outer surface. However, even in the third cycle, the Ti O2 modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.

Smoothing of Fast Assembled Layer-by-layer Films by Adjusting Assembly Conditions

To prepare layer-by-layer（LbL） multilayers in time-efficient manners by the dipping method is highly ap- pealing. However, the fast LbL assembly produces multilayers with high surface roughness. In our attempt to smooth the surface morphologies of LbL multilayers obtained by fast assembly（5 s dipping）, we studied the influence of the assembly conditions on the surface morphologies. The study shows that by properly adjusting the assembly condi- tions, such as washing duration, water annealing period, and drying with nitrogen flow, LbL multilayers with en- hanced surface smoothness could be obtained through fast LbL assembly.

Fabrication and Properties of Graphene Oxide/Sulfonated Polyethersulfone Layer-by-layer Assembled Polyester Fiber Composite Proton Exchange Membranes

Using the hydrogen-bonding interaction between graphene oxide（GO） and sulfonated polyethersulfone （SPES）, we constructed the multilayer structure of GO and SPES on the polyester tiber mats via layer-by-layer self-assembly. In each self-assembled layer, sulfonic acid groups are arranged along the a^s of fiber, which provides the long-range proton transmission channels, promoting the rapidly proton conduction. The performances of the composite membranes based on SPES and multilayer assembled polyester fiber mats were studied. The results show that the proton conductivity of composite membranes increases with the increasing assembly layers. At the same time, the mechanical properties and methanol-resistance of the composite membranes were obviously improved.

Multiscale and multicomponent layer by layer assembly of optical thin films triggered by electrochemical coupling reactions of N-alkylcarbazoles

The integration of multiscale and multicomponent of molecules and nanoparticles into thin films for applications requires the abilities of controlled their processing and assembly,which has been an great challenge because of the difficulty in manipulating the various materials such as small molecules,complexes,polymers,and inorganic nanomaterials through synergetic combinations of chemical or physical fabrications.Eletropolymerization is of great significance to fabricate polymeric film materials straight on the conductive substrates with tunable morphologies and thicknesses.However,unlimited electrochemical reactions（polymerization）have been usually leading to disadvantageous in ill-defined structure and highly doped state.Thanks to finding of exceptional electrochemical reaction（oligomerization）of N-alkylcarbazole,electrochemical layer by layer assembly has emerged as a promising strategy for a wide library of applications.The capability of this strategy can manipulate various molecules and nanoparticles into the scale and component controllable thin films.Unlike other electropolymerizable precursors such as aniline and thiophene,the resulting di-N-alkylcarbazole is transparent in the visible light region and thus does not impair the intrinsic properties of the components in the film.This account highlights of the typical findings in investigating both single-and multi-components thin films as a forum for discussing new opportunities in exploiting novel designs and applications of optical thin films.

BARK-MIMETIC LAYER-BY-LAYER ASSEMBLED MONTMORILLONITE/POLY(p-AMINOSTYRENE) FLEXIBLE NANOCOMPOSITES SHIELDING ATOMIC OXYGEN EROSION

Inspired by the birch bark, which has multilayered structures, we fabricated layer-by-layer （LbL） assembled montmorillonite （MMT） and poly（p-aminostyrene） （PPAS） nanocomposites on cotton fiber curved surfaces to provide protection from atomic oxygen （AO） erosion. The multilayer coated fibers had high flexibility, uniformity, defect free, ease of preparation and low cost. The AO erosion durability has been dramatically enhanced which was evidenced by testing in the ground-based AO effects simulation facility. And the dimension and surface morphologies of the fibers observed by SEM had few changes, indicating excellent AO erosion resistant ability of the coatings. These results provide us a new method to design fibrous materials exposed directly in low earth orbit environment.

Layer-by-layer Multilayer Films Self-assembled from a Rare-earth-containing Poly-oxometalate Na_9[Eu(W_5O_(18))_2] and Poly(allylamine hydrochloride) and Their Photoluminescent Properties

Ultrathin multilayer films of a rare-earth-containing polyoxo-metalateNa_9[Eu(W_5O_(18))_] (EW) and poly ( allylamine hydrochloride) (PAH) have been prepared bylayer-by-layer self-assembly from dilute aqueous solutions. The fabrication process of the EW/PAHmultilayer films was followed by UV-vis spec-troscopy and ellipsometry, which show that thedeposition process is linear and highly reproducible from layer to layer. An average EW/PAH bilayerthickness of ca. 2.1 nm was determined by ellipsometry. In addition, the scanning electronmicroscopy (SEM) image of the EW/PAH film indicates that the film surface is relatively uniform andsmooth. The photolumi-nescent properties of these films were also investigated by fluorescencespectroscopy.

Fabrication of Covalently Linked PAH/PVS Layer-by-layer Assembled Multilayers via a Post-photochemical Cross-linking Strategy

A post-photochemical cross-linking strategy was successfully demonstrated to enhance the stability of polyelectrolyte poly（allylamine hydrochloride）（PAH）/poly（vinylsulfonic acid sodium salt）（PVS） multilayers. Con- ventional polyelectrolyte multilayers of PAH/PVS are usually fabricated through electrostatic layer-by-layer（LbL） assembly, resulting in poor stability, especially in basic solutions, which leads to the urgent demand for converting weak electrostatic interactions into covalent bonds to enhance the stability of the multilayers. This stability problem has been ultimately addressed by post-infiltrating a photosensitive cross-linking agent, 4,4＇-diazostilbene-2,2＇- disulfonie acid disodium salt（DAS）, into the LbL assembled films to initiate the photochemical reaction to cross-link the multilayers. The obviously improved stability of the photo-cross-linked multilayers was demonstrated through experiments with basic solution treatments. Compared to the complete decomposition of uncross-linked multilayers in basic solution, over 74.4% of the covalently cross-linked multilayers were retained under the same conditions, even after a longer duration of basic solution treatment.

Induction of Superhydrophobicity in a Cellulose Substrate by LbL Assembly of Covalently Linked Dual-Sized Silica Nanoparticles Layers

Micro/nano texturized oxidized cellulose membranes (MNOCM) were constructed by layer-by-layer (LbL) assembly in which a base cellulose film was modified by covalent linkages to amino-functionalized silica nanoparticles (amino-SiO2 NPs, 260 nm diameter) and epoxy-functionalized silica nanoparticles (epoxy-SiO2 NPs, 30 nm diameter). The amino-SiO2 NPs grafted onto the MNOCM surface through a standard amidation reaction between the amino groups of the SiO2 NPs and the carboxyl groups of the MNOCM surface in the presence of EDC and NHS consequently forming a first layer of large (260 nm) nanoparticles;subsequently, it was reacted with smaller (30 nm) epoxy-SiO2 NPs. Continuous repetitions of these alternating sized silica NPs through a standard LbL approach lead to a highly micro/nano-texturized MNOCM film as shown by SEM, which was ultimately sealed with a layer of hydrophobic PFOTES (1H, 1H, 2H, 2H-perfluorooctyltriethoxysilane). Although the wettability of MNOCM was no longer hydrophilic, it was found that at five layers deep of NPs, it became superhydrophobic as evidenced by a water contact angle of 151° ± 2° and slide angle of 4°. The change in wettability was attributed to increases in final LbL layer surface roughness induced by the sufficient LbL layering of alternating sizes of NPs akin to what is observed in a lotus leaf surface. It was also noted that these superhydrophobic-MNOCM materials displayed good self-cleaning.

Intercalation Assembly Method and Intercalation Process Control of Layered Intercalated Functional Materials

Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Laboratory of Chemical Resource Engineering in Beiiing University of Chemical Technology, the orinciole for the design of controlled intercalation processes in the light of tuture production processing requirements has been developed. Intercalation assembly methods and technologies have been invented to control the intercalation process for preparing layered intercalated materials with various structures and functions.