Research on Fractal-Scanning Path for Arbitrary Boundary Layer in Layered Manufacturing

The fractal curve is proposed as a novel scanning path used in Layered Manufacturing. Aiming at a limitation that the fractal curve can only fill a square region, a method is developed to realize the trimming of fractal curve in arbitrary boundary layer by means of judging intersection points between parameterized arbitrary boundary and a FASS (space filling, self avoiding, simple and self similar) fractal curve. Accordingly, the related algorithm concerning with determining intersection points has been investigated according to the recursion feature of the fractal curve, and in the process of the fractal curve traversed, the rule of judging intersection points is ascertained as well, so that the laser scanning beam can “walk” along the fractal curve inside the desired boundary, and arbitrary contour components are fabricated.

Material manufacturing from atomic layer

Atomic scale engineering of materials and interfaces has become increasingly important in material manufacturing.Atomic layer deposition(ALD)is a technology that can offer many unique properties to achieve atomic-scale material manufacturing controllability.Herein,we discuss this ALD technology for its applications,attributes,technology status and challenges.We envision that the ALD technology will continue making significant contributions to various industries and technologies in the coming years.

Characterization of microstructure and strain response in Ti-6Al-4V plasma welding deposited material by combined EBSD and in-situ tensile test

Additive layer manufacturing （ALM） of aerospace grade titanium components shows great promise in supplying a cost-effective alternative to the conventional production routes. Complex microstructures comprised of columnar remnants of directionally solidifiedβ-grains, with interior inhabited by colonies of finerα-plate structures, were found in samples produced by layered plasma welding of Ti-6Al-4V alloy. The application of in-situ tensile tests combined with rapid offline electron backscatter diffraction （EBSD） analysis provides a powerful tool for understanding and drawing qualitative correlations between microstructural features and deformation characteristics. Non-uniform deformation occurs due to a strong variation in strain response between colonies and across columnar grain boundaries. Prismatic and basal slip systems are active, with the prismatic systems contributing to the most severe deformation through coarse and widely spaced slip lines. Certain colonies behave as microstructural units, with easy slip transmission across the entire colony. Other regions exhibit significant deformation mismatch, with local build-up of strain gradients and stress concentration. The segmentation occurs due to the growth morphology and variant constraints imposed by the columnar solidification structures through orientation relationships, interface alignment and preferred growth directions. Tensile tests perpendicular to columnar structures reveal deformation localization at columnar grain boundaries. In this work connections are made between the theoretical macro- and microstructural growth mechanisms and the observed microstructure of the Ti-6Al-4V alloy, which in turn is linked to observations during in-situ tensile tests.

A Comparison between Direct and Indirect Laser Sintering of Metals

Layer manufacture technologies are gaining increasing attention in the manufacturing for the production of polymer mould tooling. Layer manufacture techniques can be used in this potential manufacturing area to produce tooling either indirectly or directly, and powder metal based layer manufacture systems are considered as an effective way of producing rapid tooling. Mechanical properties and accuracy are critical for tooling. This paper reports the results of an experimental study examining the potential of layer manufacturing processes to deliver production tooling for polymer manufacture. A comparison between indirectly selective laser sintering and directly selective laser sintering to provide the tooling was reported. Three main areas were addressed during the study： mechanical strength, accuracy, and build rate. Overviews of the results from the studies were presented.

Synthesis of Polymer Nanocomposites for Selective Laser Sintering （SLS）

This paper presents initial development of polymer application. PNC materials containing a polyamide （PA） and nano to improve the mechanical properties. Commercial polyamide 6 nanocomposites （PNC） material for rapid manufacturing （RM） particles （5 wt%） were produced by solution blending with the aim （PA6） was dissolved in formic acid （HCO2H） together with two different types of nano particle materials： yttrium stabilised zirconia （YSZ） and Hectorite clay （Benton 166） and spray-dried to create powder, creating powder with particle sizes in the range of 10-40 μm. The materials were processed on a CO2 selective laser sintering （SLS） experimental machine. Mechanical properties of the PNCs were evaluated and the results were compared with the unfilled base polymer. Good dispersion of additives was achieved by solution blending, however the PA6 was degraded during the material preparation and spray drying process which resulted in the formation of porous structure and low strength. However the addition of 5 （wt%） nano particles in the PA6 has shown to increase strength by an average of 50-60%. Further work on powder preparation is required in order to fully realize these performance benefits.

Hybrid Additive Manufacturing of Forming Tools

Additive manufacturing(AM)is widely used in the automotive industry and has been expanded to include aerospace,marine,and rail.High flexibility and the possibility of manufacturing complex parts in AM motivate the integration of additive manu-facturing with classical forming technologies,which can improve tooling concepts and reduce costs.This study presents three applications of this integration.First,the possibility of successful utilization of selective laser melting for manufacturing extrusion tools with complex cooling channels and paths for thermocouples is reported,leading to significantly reduced inner die temperatures during the extrusion process.Second,sheet lamination is integrated with laser metal deposition(LMD)to manufacture deep-drawing dies.Promising results are achieved in reducing the stair step effect,which is the main challenge in sheet lamination,by LMD and following post-processing such as milling,ball burnishing,and laser polishing.The new manufacturing route shows that LMD can economically and efficiently reduce the stair step effect and omit the hardening step from the conventional manufacturing process route.Finally,LMD is used to manufacture a hot stamping punch with improved surface roughness by ball burnishing and near-surface complex cooling channels.The experimental results show that the manufactured punch has lower temperatures during hot stamping compared with the conventionally manufactured punch.This study shows the successful integration of AM processes with classical forming processes.

Wear Behavior of Cold Pressed and Sintered Al_2O_3/TiC/CaF_2-Al_2O_3/TiC Laminated Ceramic Composite

A novel laminated Al2O3/TiC/CaF2-Al2O3/TiC sandwich ceramic composite was fabricated through cold pressing and sintering to achieve better anti-wear performance, such as low friction coefficient and low wear rate. Al2O3/TiC/CaF2 and Al2O3/TiC composites were alternatively built layer-by-layer to obtain a sandwich structure. Solid lubricant CaF2 was added evenly into the Al2O3/TiC/CaF2 layer to reduce the friction and wear. Al2O3/TiC ceramic was also cold pressed and sintered for comparison. Friction analysis of the two ceramics was then conducted via a wear-and-tear machine. Worn surface and surface compositions were examined by scanning electron microscopy and energy dispersion spectrum, respectively. Results showed that the laminated Al2O3/TiC/CaF2-Al2O3/TiC sandwich ceramic composite has lower friction coefficient and lower wear rate than those of Al2O3/TiC ceramic alone because of the addition of CaF2 into the laminated Al2O3/TiC/CaF2-Al2O3/TiC sandwich ceramic composite. Under the friction load, the tiny CaF2 particles were scraped from the Al2O3/TiC/CaF2 layer and spread on friction pairs before falling off into micropits. This process formed a smooth, self-lubricating film, which led to better anti-wear properties. Adhesive wear is the main wear mechanism of Al2O3/TiC/CaF2 layer and abrasive wear is the main wear mechanism of Al2O3/TiC layer.