Characteristics of leaching of heavy metals from low-sulfur coal gangue under different conditions

Coal gangue is the main pollution source of mining areas.When coal gangue is stacked and recycled,the heavy metal elements contained in it are released by natural weathering and leaching,which causes damage to the surrounding ecological environment.In this study,the leaching and precipitation characteristics of heavy metals in low-sulfur coal gangue under different environmental conditions were simulated by indoor dynamic leaching experiments,which provided a theoretical basis for environmental restoration of the mining area.The conclusions are as follows:higher heavy metal content in low-sulfur coal gangue is associated with greater,leaching of heavy metals;acidic conditions promote the release of heavy metals in low-sulfur coal gangue;and more precipitation is associated with better release of heavy metals from the low-sulfur coal gangue.

Leaching of lead from zinc leach residue in acidic calcium chloride aqueous solution

A process with potentially reduced environmental impacts and occupational hazards of lead-bearing zinc plant residue was studied to achieve a higher recovery of lead via a cost-effective and environmentally friendly process. This paper describes an optimization study on the leaching of lead from zinc leach residue using acidic calcium chloride aqueous solution. Six main process conditions, i.e., the solution pH value, stirring rate, concentration of CaC12 aqueous solution, liquid-to-solid （L/S） ratio, leaching temperature, and leaching time, were inves- tigated. The microstructure and components of the residue and tailing were characterized using scanning electron microscopy （SEM） and X-ray diffraction （XRD）. On the basis of experimental results, the optimum reaction conditions were determined to be a solution pH value of 1, a stirring rate of 500 r·min-1, a CaC12 aqueous solution concentration of 400 g·L-1, a liquid-to-solid mass ratio of 7：1, a leaching tempera- ture of 80℃, and a leaching time of 45 min. The leaching rate of lead under these conditions reached 93.79%, with an iron dissolution rate of 19.28%. Silica did not take part in the chemical reaction during the leaching process and was accumulated in the residue.

Strengthening leaching effect of Carlin-type gold via high-voltage pulsed discharge pretreatment

A high-voltage pulsed discharge(HVPD)pretreatment was used to strengthen the leaching effect of Carlin-type gold ore containing arsenic.Optimal results of the pretreatment experiments were obtained at the following operating conditions:a spherical gap spacing of 20 mm,pulse number of 100,and voltage of 30 kV.The leaching rate of gold was increased by 15.65%via the HVPD pretreatment.The mass fraction of–0.5+0.35 mm and–0.35+0.1 mm was increased by 10.97%and 6.83%compared to the untreated samples,respectively,and the Au grade of–0.1 mm was increased by 22.84%.However,the superiority of the HVPD pretreatment would be weakened by prolonged grinding time.Scanning electron microscopy results indicated that the pretreated products presented as a melting state and then condensation,accompanying by some pore formation.More micro-cracks were generated at the interface of the ore and the original crack were expended via pulsed discharge pretreatment,with the contact area between the leaching reagent and ore increased,the leaching reaction rate enhanced and the leaching effect strengthened.

Prediction of leaching rate in heap leaching process by grey dynamic model GDM(1,1)

The method of developing GM（1,1） model is extended on the basis of grey system theory. Conditions for the transfer function that improve smoothness of original data sequence and decrease the revert error are given. The grey dynamic model is first combined with the transfer function to predict the leaching rate in heap leaching process. The results show that high prediction accuracy can be expected by using the proposed method. This provides a new approach to realize prediction and control of the future behavior of leaching kinetics.

Leaching of vanadium,sodium,and silicon from molten V?Ti-bearing slag obtained from low-grade vanadium-bearing titanomagnetite

The water leaching process of vanadium, sodium, and silicon from molten vanadium-titanium-bearing（V-Ti-bearing） slag obtained from low-grade vanadium-bearing titanomagnetite was investigated systematically. The results show that calcium titanate, sodium aluminosilicate, sodium oxide, silicon dioxide and sodium vanadate are the major components of the molten V-Ti-bearing slag. The experimental results indicate that the liquid-solid（L/S） mass ratio significantly affects the leaching process because of the respective solubilities and diffusion rates of the components. A total of 83.8% of vanadium, 72.8% of sodium, and 16.1% of silicon can be leached out via a triple counter-current leaching process under the optimal conditions of a particle size below 0.074 mm, a temperature of 90°C, a leaching time of 20 min, an L/S mass ratio of 4：1, and a stirring speed of 300 r/min. The kinetics of vanadium leaching is well described by an internal diffusion-controlled model and the apparent activation energy is 11.1 kJ/mol. The leaching mechanism of vanadium was also analyzed.

Distribution of Na+and Mechanical Properties of Hardened Body of Alkali-activated Cementitious Materials

To explore the distribution of and the mechanical properties(compressive strength)of the hardened body of alkali slag-fly ash cementitious materials,this study was conducted by using the XRD,FTIR,SEM/EDS,and other test methods in three conditions:airtight drying(AD),airtight immersion(AI),and airtight soaking(AS).The 1D distribution law of free of hardened body under standard curing conditions was explored.The experimental results show that under standard curing conditions,the 1D distribution of within 0d-3 d shows a∨-shaped distribution,within 3-7 d show a∧-shaped distribution,and within 7-28 d tends to be balanced.The test results of leaching rate show that the free was the most stable under AD conditions and the hardened body bound the most by XRD,FTIR and SEM/EDS.And the compressive strength of the hardened body was the highest.The compressive strength of 28th reached 95.9 MPa.The definite distribution of provides an important reference for the strength development and durability evaluation of the hardened body of alkaliexcited cementitious materials.

Effect of chemical composition on the element distribution,phase composition and calcification roasting process of vanadium slag

The chemical composition of vanadium slag significantly affects its element distribution and phase composition,which affect the subsequent calcification roasting process and vanadium recovery.In this work,seven kinds of vanadium slags derived from different regions in China were used as the raw materials to study the effects of different components on the vanadium slag’s elements distribution,phase composition,calcification roasting,and leaching rate of major elements using scanning electron microscope,X-ray diffraction analysis,and inductively coupled plasma-optical emission spectroscopy.The results show that the spinel phase is wrapped with silicate phase in all vanadium slag samples.The main elements in the spinel phase are Cr,V,and Ti from the interior to the exterior.The size of spinel phase in low chromium vanadium slag is larger than the other vanadium slags with higher chromium contents.The spinel phase of high-calcium and high-phosphorus vanadium slag is more dispersed.The strongest diffraction peak of vanadium spinel phase in the vanadium slag migrates to a higher diffraction angle,and(Fe_(0.6)Cr_(0.4))_(2)O_(3)is formed after calcification roasting as the chromium content increased.A large amount of Ca_(2)SiO_(4)is produced because excess Ca reacts with Si in high-calcium and high-phosphorus vanadium slag.The vanadium leaching rate reaches 88%in some vanadium slags.The chromium leaching rate is less than 5%in all vanadium slags.The silicon leaching rate of high-calcium and high-phosphorus vanadium slag is much higher than that of the other slags.The leaching rate of manganese is higher than 10%,and the leaching rates of iron and titanium are negligible.

Effects of microwave pretreatment on zinc extraction from spent catalyst saturated with zinc acetate

A new technology for microwave pretreatment of spent catalyst on Zn extraction by HCl leaching was proposed and the temperature-change curve of spent catalyst under microwave irradiation was measured.The influence of microwave pretreatment temperature and microwave irradiation time on zinc extraction was investigated and the mechanism of microwave pretreatment for spent catalyst was analyzed.The results show that microwave pretreatment can greatly enhance the leaching rate of Zn.The Zn extraction reaches 96.58%under the conditions of microwave pretreatment temperature of 950℃and the microwave irradiation time of 12 min.The blocked pores of spent catalyst can be opened through microwave pretreatment,increasing the contact area of leaching reagent and zinc.

Preparation and Aqueous Durability of Sr Incorporation into Rutile TiO_2

TiO2 was employed as the waste form for disposal of simulated nuclide Sr. Preparation of Sr bearing rutile was explored under different sintering temperatures and Sr contents. The optimal treatment temperature was confirmed as 1300 ℃ for the incorporation of SrO in rutile Ti O2. Perovskite type Sr TiO3 was prepared as the resultant product. The limited containment capacity of SrO in rutile was speculated to be 56.5wt%. As the SrO content increases, the as-synthesized sample exhibits more porosity because Sr TiO3 phase demonstrates higher density than rutile and SrO. The 28 day normalized leaching rate（LRi） of Sr and Ti will decrease congruously as the SrO incorporation increases. The LRSr value is lower than 0.1g·m^-2·d^-1, which is about 3 orders of magnitude higher than the LR（Ti） value.