Sulfidation roasting of lead and zinc carbonate with sulphur by temperature gradient method

In order to enhance the lead and zinc recovery from the refractory Pb-Zn oxide ore, a new technology was developed based on sulfidation roasting with sulphur by temperature gradient method. The solid-liquid reaction system was established and the sulfidation thermodynamics of lead and zinc carbonate was calculated with the software HSC 5.0. The effects of roasting temperature,molar ratio of sulphur to lead and zinc carbonate and reaction time in the first step roasting, and holding temperature and time in the second roasting on the sulfidation extent were studied at a laboratory-scale. The experimental results show that the sulfidation extents of lead and zinc are 96.50% and 97.29% under the optimal conditions, respectively, and the artificial galena, sphalerite and wurtzite were formed. By the novel sulfidizing process, it is expected that the sulphides can be recovered by conventional flotation technology.

Size distribution and source of heavy metals in particulate matter on the lead and zinc smelting affected area

In order to understand the size distribution and the main kind of heavy metals in particulate matter on the lead and zinc smelting affected area, particulate matter （PM） and the source samples were collected in Zhuzhou, Hunan Province from December 2011 to January 2012 and the results were discussed and interpreted. Atmospheric particles were collected with different sizes by a cascade impactor. The concentrations of heavy metals in atmospheric particles of different sizes, collected from the air and from factories, were measured using an inductively coupled plasma mass spectrometry （ICP-MS）. The results indicated that the average concentration of PM, chromium （Cr）, arsenic （As）, cadmium （Cd） and lead （Pb） in PM was 177.3 ± 33.2 μg/m^3, 37.3 ± 8.8 ng/m^3, 17.3 ± 8.1 ng/m^3, 4.8 ± 3.1 ng/m^3 and 141.6 ± 49.1 ng/m^3, respectively. The size distribution of PM displayed a bimodal distribution; the maximum PM size distribution was at 1.1-2.1 μm, followed by 9-10 μm. The size distribution of As, cd and Pb in PM was similar to the distribution of the PM mass, with peaks observed at the range of 1.1-2.1 μm and 9-10 μm ranges while for Cr, only a single-mode at 4.7-5.8 μm was observed. PM （64.7%, As （72.5%）, cd （72.2%） and Pb （75.8%） were associated with the fine mode below 2.1 μm, respectively, while Cr （46.6%） was associated with the coarse mode. The size distribution characteristics, enrichment factor, correlation coefficient values, source information and the analysis of source samples showed that As, Cd and Pb in PM were the typical heavy metal in lead and zinc smelting affected areas, which originated mainly from lead and zinc smelting sources.

NWME Group Embraces New Development Opportunities of Lead and Zinc Industry Segment

Recently,NWME Group Co.,Ltd.,affiliated to Shaanxi Non-ferrous Metals Holding Group Co.,Ltd.,held the special promotion meeting for the reform and reorganization of lead and zinc industry segment at NWME Erlihe Lead and Zinc Mine in Baoji City.Themed“reorganizing lead and zinc industry segment,

甘肃成县庙沟—大沙湾铅锌矿区成矿地质特征及找矿方向

甘肃成县庙沟—大沙湾铅锌矿区位于西秦岭多金属成矿带西段的西成铅锌矿田内,矿区的铅锌矿化受安家岔组条带状大理岩化灰岩和条带状大理岩的控制,喷流沉积(成岩)作用是成矿的主要因素,为喷流沉积的SEDEX型矿床,同生沉积特征明显,具热水沉积特征,发育有硫化物岩、重晶石岩、硅质岩等。预测靶区为马蹄沟一带近EW向岩相突变带。