Effect of the current density on electrodepositing alpha-lead dioxide coating on aluminum substrate

The α-PbO2 electrodes are prepared by anodic electrodeposition on Al/conductive coating electrode from alkaline plumbite solutions in order to investigate the effect of the different current densities on the properties of α-PbO2 electrodes. The physic- ochemical properties of the α-PbO2 electrodes are analyzed by using SEM, EDS, XRD, Tafel plot, linear sweep voltammetry （LSV） and A.C. impedance. A compact and uniform layer of lead dioxide ：）vas obtained at the current density of 3 mA.cm-2. A further increase in current density results in smaller particles with high porosity. EDS and XRD analyses have shown that the PbO2 deposited in alkaline conditions is highly non stoichiometric, and the PbO impurities are formed on the surface layer besides the α-PbO2. The corrosion resistance of α-PbO2 at the low current density is superior to that of the high current density. It can be attributed to a porous layer of deposited films at high current densities in aqueous Zn2＋ 50 g·L^-1, H2SO4 150 When used as anodes for oxygen evolution g·L^-1, the Al/conductive coating/α-PbO2 exhibits lower potential compared to Pb electrode. Al/conductive coating/α-PbO2 electrode with the best electrocatalytic activity was obtained at current density of 1 mA·cm^-2. The lowest roughnest factor was obtained at 1 mA·cm^-2.

Degradation of Phenol by Hydroxyl Radicals on Different Coating Lead Dioxide Electrodes

Lead dioxide electrodes on Ti substrates were prepared by thermal-deposition or electro-deposition. The amount of hydroxyl radicals generated at the electrodes prepared by the above-mentioned two methods was compared with that at the electrodes mingled with Bi or La prepared by electro-deposition. The experimental results indicate that the highest concentration of hydroxyl radicals generated by thermal-deposition, electro-deposition mingled with nothing, electro-deposition mingled with Bi or La was 0.781, 1.048, 1.838 or 2.044 μmol/L, respectively. When phenol was electrolyzed on the four electrodes at a current density of 30 mA/cm2, the removal efficiency of phenol after electrolysis for 1.5 h was 87.30%, 93.55%, 97.95% or 98.70%, TOC removal efficiency after electrolysis for 5 h was 86.76%, 94.26%, 98.53% or 99.60%, respectively. Through the degradation experiments of phenol, the amount of hydroxyl radicals was responsible for the removal efficiency of phenol. The electro-catalytic characteristics were investigated by SEM, the generation amount of hydroxyl radicals, the degradation degree of phenol and the stability and conductivity of the electrodes were also investigated. The experimental results indicate that the four electrodes all show good electro-catalytic characteristics; the electro-catalytic characteristics of the electrode mingled with La were superior to those of the other three ones, and the electrochemical degradation of phenol followed one-step reaction dynamics.

Formation of Iodinated Trihalomethane Disinfection By-products by Co-oxidation of Natural Organic Matter with Sodium Hypochlorite and Lead Dioxide

Iodinated trihalomethanes(I-THMs)in drinking water pipelines have attracted wide attention due to their high toxicity.The coexistence of widely present lead dioxide(PbO_(2))with commonly used disinfectant sodium hypochlorite(NaClO)in drinking water might change the formation characteristics of I-THMs due to the strongly oxidizing properties of PbO_(2).This study investigated the formation of I-THMs during the co-oxidation of natural organic matter including humic acid(HA),extracellular organic matter(EOM),and intracellular organic matter(IOM)of algogenic organic matter by PbO_(2) and NaClO.Triiodomethane(CHI_(3))is the dominant product in the single oxidation system of PbO_(2),whereas trichloromethane(CHCl_(3)),chlorodiiodomethane(CHClI_(2)),and dichloroiodomethane(CHCl2I)are the major products in the single NaClO system.In the co-oxidation system,the dominant I-THMs are similar to those in the single NaClO system.However,the CHCl_(3) content decreased to 56.4%whereas I-THMs concentrations remained unchanged with the increase of PbO_(2) concentration.The main reason is attributed to the reduced residual chlorine content due to the reaction of PbO_(2) with NaClO.IOM is more prone to forming I-THMs than HA and EOM due to the specified structures.This study suggested that PbO_(2) in the drinking water supply pipelines might change the risk of THMs.

Electrosynthesis and physicochemical properties ofα-PbO_2-CeO_2-TiO_2 composite electrodes

In order to investigate the effect of solid particles dopants on physicochemical properties of α-PbO2 electrodes, a-PbO2 composite electrodes doped with nano-TiO2 and nano-CeO2 particles were respectively prepared on A1/conductive coating electrodes in 4 mol/L NaOH solution with addition of PbO until saturation by anodic codeposition. The electrodeposition mechanism, morphology, composition and structure of the composite electrodes were characterized by cyclic voltarnmogram （CV）, SEM, EDAX and XRD. Results show that the doping solid particles can not change reaction mechanism of α-PbO2 electrode in alkaline or acid plating bath, but can improve deposition rate and reduce oxygen evolution potential. The doping solid particles can inhibit the growth of a-PbO2 unit cell and improve specific surface area. The diffraction peak intensity of a-PbO2-CeO2-TiO2 composite electrode is lower than that of pure a-PbO2 electrode. The electrocatalytic activity of a-PbO2-2.12%CEO2-3.71%TIO2 composite electrode is the best. The Guglielmi model for CeO2 and TiO2 codeposition with a-PbO2 is also pronosed.

Comparison Between Performances of PbO_2 and F^--doped PbO_2 Anodes for Electrochemical Degradation of Aniline

The paper deals with the influence of anode material on the efficiency of degradation for organic pollutants in water system.The electrochemical performance of fluorine ion doped lead dioxide（F--PbO2） electrode for the degradation of aniline was compared with that of undoped lead dioxide（PbO2） electrode by ultraviolet-visible（UV-Vis） spectroscopy,linear voltammetry and other analytical methods,such as the measurement by chemical oxygen demand analyzer,high performance liquid chromatography and scanning electron micrography.It was shown that both PbO2 electrode and F--PbO2 electrode could make aniline be mineralized completely and have the same degradation course,but F--PbO2 electrode has much higher electrocatalytic activity than undoped PbO2 electrode for the electrochemical degradation of aniline.The experimental results confirm that F--PbO2 electrode has much higher potential for oxygen evolution than undoped PbO2 electrode.

Preparation of Ti/PTFE-F-PbO2 Electrode with a Long Life from the Sulfamic Acid Bath and Its Application in Organic Degradation

A polytetrafluoroethylene （PTFE）-doped PbO2 electrode on a Ti substrate was prepared by galvanostatic method from the sulfamic acid bath （Ti/PTFE-F-PbO2-I） or nitric acid bath （Ti/PTFE-F-PbO2-II）. Scanning Electron Microscopy revealed that the Ti/PTFE-PbO2-I electrode had a more regular morphology with smaller size crystals than the Ti/PTFE-F-PbO2-II electrode. On the basis of the results of both the accelerated electrolysis test and the empirical formula for estimating the service life of an electrode, the service life of the Ti/PTFE-PbO2-I electrode was predicted to be more than 7 years under conventional electrolysis conditions （0.1 A·cm^-2）. During the treatment of 4-chlorophenol-contaminated water, the Ti/PTFE-PbO2-I anode showed both a good electro-catalytic activity and high electrochemical stability, exhibiting an excellent potential application.

KINETICS OF OXYGEN EVOLUTION REACTION ON PbO_2-Ti/MnO_2 ELECTRODE AND ELEC TRO CATALYSIS

The kinetics of oxygen evolution reaction(OER)on PbO_2-Ti/MnO_2 electrode has been studied using galvanistatic technique.In terms of kinetic parameters,the reaction path of OER is proposed.The electrocataIytic activity of lead dioxide and manganese dioxide has been discussed according to the theory of molecular orbit and quantum chemistry caIculation.It is concluded that the electrocatalytic activity of manganese dioxide is higher than that of lead dioxid,which is in agreement with the experimental result.

Electrocatalytic oxidation of gaseous toluene in an all-solid cell using a foam Ti/Sb-SnO2/β-PbO_(2) anode

Mineralization of benzene,toluene,and xylene (BTX) with high efficiency at room temperature is still a challenge for the purification of indoor air.In this work,a foam Ti/Sb-Sn O2/β-Pb O_(2)anode catalyst was prepared for electrocatalytically oxidizing gaseous toluene in an all-solid cell at ambient temperature.The complex Ti/Sb-Sn O_(2)/β-Pb O_(2)anode,which was prepared by sequentially deposing Sb-Sn O_(2)and β-Pb O_(2)on a foam Ti substrate,shows high electrocatalytic oxidation efficiency of toluene (80%) at 7 hr of reaction and high CO_(2)selectivity (94.9%) under an optimized condition,i.e.,a cell voltage of 2.0 V,relative humidity of60%and a flow rate of 100 m L/min.The better catalytic performance can be ascribed to the high production rate of·OH radicals from discharging adsorbed water and the inhibition of oxygen evolution on the surface of foam Ti/Sb-Sn O_(2)/β-Pb O_(2)anode when compared with the foam Ti/Sb-Sn O_(2)anode.Our results demonstrate that prepared complex electrodes can be potentially used for electrocatalytic removal of gaseous toluene at room temperature with a good performance.

Quick fabrication of evenly porous PbO_(2) through potential linear increase electrodeposition

Anodic oxidation electrodeposition is the primary way to prepare lead dioxide anode. The regulation of the external circuit for the reaction is a unique advantage of electrocatalytic reaction, which can regulate crystallization and accelerate the reaction process. In this study, lead dioxide coatings with uniform pore size distribution were quickly prepared on three different substrates by potential linear increase electrodeposition(PLIED). Morphology and structure analysis shows that the prepared electrodes have uniform porous morphology, and Ti/SnO_(2)/PLIED has the smallest grain size. Three electrodes all display well degradation performance to azophloxine and diclofenac sodium. Ti/PLIED, and Ti/SnO_(2)/PLIED are appreciated for degrading organics with a simple structure in low concentrations. At the same time,Ti/SnO_(2)/PLIED is more suitable for complex organics in high concentrations. Electrochemical activity tests indicate the different mechanisms of the PLIED electrodes that build the other degradation performance.Three PLIED electrodes show excellent electrical and electrochemical stability during the cycle degradation process. The results provide a reference for the subsequent anodic oxidation electrodeposition research and the regulating effect of the external circuit on coating properties.

Performance of PbO_2/activated carbon hybrid supercapacitor with carbon foam substrate

PbO_2/activated carbon（AC） hybrid supercapacitor in H_2SO_4 with a carbon foam current collector is studied.The PbO_2/AC hybrid is designed with electrodeposited PbO_2 thin film as positive electrode to match with AC negative electrode.The discharge curve shows capacitive characteristics between 1.88 V and 0.65 V.The hybrid system exhibits excellent energy and power performance,with specific energy of 43.6 Wh/kg at a power density of 654.2 W/kg.The use of carbon foam current collector ensures stability of the PbO_2 electrode in H_2SO_4 environment.After 2600 deep cycles at 15 C high rate of charge/discharge,the capacity remains nearly unchanged from its initial value.

Embedding wasted hairs in Ti/PbO_(2) anode for efficient and sustainable electrochemical oxidation of organic wastewater

Despite of the hazardous risk of Pb^(2+) leakage, lead dioxide has been attributed as a quasi-ideal anode material with high oxygen evolution potential, excellent conductivity, good stability and low cost in electrochemical oxidation wastewater treatment technique. In this study, a novel Ti/PbO_(2) anode was fabricated by embedding raw materials that are readily and cheaply available, i.e., hairs. The structure-activity relationship of the new electrode was firstly revealed by material and electrochemical characterizations. Then different levels of pollutants (azo dye, phenol and maleic acid) were used to investigate the electrochemical oxidation performance of the new electrode. Finally, the accelerated electrode lifetime and Pb^(2+) leakage tests were carried out. Results showed that the embedded hairs changed the preferential crystallographic orientation of PbO_(2) and decreased the grain size. Hairs introduced additional roughness and active sites, and decreased the electrode impedance, especially under 5 mg/cm^(2) of embedding amount. The removal efficiencies of different target pollutants were enhanced more or less by embedding appropriate amount of hairs, depending on the current density, but loading excessive hairs had a negative effect. The accumulation of intermediate products during phenol degradation was also changed by the hairs. The new electrode could undergo ~550 h of harsh electrolysis. It is also relieved that the Pb^(2+) leakage was found to be suppressed during this long-term electrolysis process.

Study on the iodination of uracil derivatives

5-Iodouracil derivatives have interesting biological activities and can serve as important substrates for the metal-catalyzed cross-coupling reactions to introduce alkyl, alkenyl, and alkynyl groups to the C-5 position of uracil derivatives. In order to find a good method to iodinate directly the C-5 of uracil derivatives, we investigated three methods, which included iodine/lead （IV） dioxide, iodine/ammonium hexanitratocerate （CAN） and iodine chloride, and examined their reactivity to different types of uracil and thiouracil derivatives.