A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.

量子Loop代数U_(q)(L(sl_(2)))的单权模

用构造的方法解决量子Loop代数U_(q)(L(sl_(2)))具有一个一维权空间的单权模的结构问题,得到了任意一个具有一维权空间的单权模必同构于U_(q)(L(sl_(2)))的四类单权模之一.此外,还构造了一类权空间维数为2的既非最高权也非最低权的量子Loop代数U_(q)(L(sl_(2)))的单权模.

Advancing neuroscience through real-time processing of big data:Transition from open-loop to closed-loop paradigms

The brain functions as a closed-loop system that continuously generates behavior in response to the external environment and adjusts actions based on the outcomes.Traditional research methodologies in neuroscience,especially those employed in brain imaging experiments,have mainly adopted an open-loop paradigm(Grosenick et al.,2015).Functional neural circuits are analyzed offline and subsequently tested through manipulation of neuronal activities within specific regions or with genetic markers.By establishing a closed-loop research paradigm,functional ensembles can be detected and tested in real time with temporal sequences.These functional ensembles,rather than brain regions or genetically labeled neural populations,serve as fundamental units of neural networks,offering valuable insights into the dissection of neural circuits.The closed-loop research paradigm also enables the capture of high-dimensional activities of internal brain dynamics and precise elucidation of physiological processes such as learning,decision-making,and sleep.

庆阳驴mtDNA D-loop区遗传多样性及起源分析

[目的]研究庆阳驴养殖群体的遗传多样性与母系起源,了解其遗传信息,为保护庆阳驴种质资源、选育和遗传改良工作提供理论依据。[方法]随机选取133头庆阳驴,对其线粒体DNA(mitochondrial DNA,mtDNA)D-loop区序列进行PCR扩增、测序及比对,并探讨庆阳驴的遗传多样性与母系起源。[结果]在获得的520 bp D-loop碱基序列中,AT含量(57.3%)高于GC含量(42.8%),表现出碱基的偏倚性;检测到38个变异位点,包含8个碱基对的转换;其核苷酸多样性(Pi)、单倍型多样性(Hd)、平均核苷酸差异(K)分别为0.01591、0.895和8.274,与欧洲家驴和中国家驴研究的平均值相比较低,说明该驴品种核苷酸变异较为贫乏。庆阳驴mtDNA D-loop区存在35个单倍型,单倍型之间的遗传距离为0.002~0.042。系统进化结果显示,庆阳驴存在2个线粒体支系,表明其具有2个母系起源,且遗传距离表明,庆阳驴与克罗地亚家驴之间的遗传距离较近。[结论]本研究从分子水平初步揭示庆阳驴核苷酸变异比较贫乏,杂交程度高,mtDNA遗传多态性正逐步丧失,应加强庆阳驴品种的遗传资源保护工作。

Mn-doped SrCoO_(3-δ) Perovskite Oxides for Ethylene Production via Chemical Looping Oxidative Dehydrogenation of Ethane

Chemical looping oxidative dehydrogenation (CL-ODH) is an economically promising method for convertingethane into higher value-added ethylene utilizing lattice oxygen in redox catalysts, also known as oxygen carriers. Inthis study, perovskite-type oxide SrCoO_(3-δ) and B-site Mn ion-doped oxygen carriers (SrCo_(1-x)MnxO_(3-δ), x=0.1, 0.2, 0.3)were prepared and tested for the CL-ODH of ethane. The oxygen-deficient perovskite SrCoO_(3-δ) exhibited high ethyleneselectivity of up to 96.7% due to its unique oxygen vacancies and lattice oxygen migration rates. However, its low ethyleneyield limits its application in the CL-ODH of ethane. Mn doping promoted the reducibility of SrCoO_(3-δ) oxygen carriers,thereby improving ethane conversion and ethylene yield, as demonstrated by characterization and evaluation experiments.X-ray diffraction results confirmed the doping of Mn into the lattice of SrCoO_(3-δ), while X-ray photoelectron spectroscopy(XPS) indicated an increase in lattice oxygen ratio upon incorporation of Mn into the SrCoO_(3-δ) lattice. Additionally, H2temperature-programmed reduction (H2-TPR) tests revealed more peaks at lower temperature reduction zones and a declinein peak positions at higher temperatures. Among the four tested oxygen carriers, SrCo0.8Mn0.2O_(3-δ) exhibited satisfactoryperformance with an ethylene yield of 50% at 710 °C and good stability over 20 redox cycles. The synergistic effect of Mnplays a key role in increasing ethylene yields of SrCoO_(3-δ) oxygen carriers. Accordingly, SrCo0.8Mn0.2O_(3-δ) shows promisingpotential for the efficient production of ethylene from ethane via CL-ODH.

基于D-loop序列和微卫星标记的4个黄颡鱼群体的遗传变异分析

为探究广东珠江、广西漓江、四川金沙江和云南西江4个水系黄颡鱼(Pelteobagrus fulvidraco)群体的遗传变异情况,本研究分别基于上述水系共108尾黄颡鱼的线粒体D-loop序列和12个微卫星标记对4个黄颡鱼群体进行群体内遗传多样性、群体间遗传距离和变异及群体结构分析。结果表明:共得到105个D-loop序列,其核苷酸组成中A+T含量占比为56.22%,G+C含量占比为43.78%。在105个有效序列中,多态位点数为746个(含缺和无效多态位点),单倍型数为51个。Hap2、Hap25、Hap15分别是广东珠江、广西漓江、四川金沙江群体的优势单倍型。4个黄颡鱼群体的单倍型多样性(H_(d))介于0.842~0.940,核苷酸多样性(π)介于0.002~0.083;四川金沙江群体Hd的最低,π也处于较低水平;而云南西江群体的Hd和π均最高;4个群体的Tajima′s D值均小于0。等位基因数(Na)、有效等位基因数(Ne)、观测杂合度(Ho)、期望杂合度(He)、多态信息含量(PIC)均为广西漓江群体最高,广东珠江群体次之,云南西江群体较低,四川金沙江群体最低。4个黄颡鱼群体的K2P遗传距离介于0.008~0.115之间,其中广西漓江与云南西江群体间的K2P遗传距离最近;广东珠江群体与其他3个群体的K2P遗传距离较远,与四川金沙江群体的K2P遗传距离最远。4个黄颡鱼群体间均存在极显著的遗传分化(P<0.01),群体间遗传分化指数(F_(st))介于0.114~0.959之间。4个黄颡鱼群体间Nei’s遗传距离和遗传一致性分别介于0.117~1.114之间和0.328~0.890之间,其中,广西漓江群体与云南西江群体的Nei’s遗传距离最近、遗传一致性最高,广东珠江与四川金沙江群体的Nei’s遗传距离最远、遗传一致性最低。在UPGMA系统聚类树中,4个黄颡鱼群体主要分为两支,其中广西漓江群体、云南西江群体最先聚为一支,然后与四川金沙江群体聚为一支,最后与广东珠江群体聚类。在NJ聚类树中,4个群体黄颡鱼的明显分为4个分支,广西漓江群体与云南西江群体呈镶嵌式分布。4个黄颡鱼群体中共享单倍型较少,但特有单倍型较多,其中云南西江和广西漓江群体相邻较近且共有单倍型较多。在基于Nei’s遗传距离进行的主坐标分析中,广西漓江群体和云南西江群体的个体之间遗传差异较小,广东珠江和四川金沙江群体的个体之间遗传差异较大。说明四川金沙江群体遗传多样性水平较低,云南西江群体遗传多样性水平较高,广西漓江群体与云南西江群体存在一定的基因交流。

Gigahertz frequency hopping in an optical phase-locked loop for Raman lasers

Raman lasers are essential in atomic physics,and the development of portable devices has posed requirements for time-division multiplexing of Raman lasers.We demonstrate an innovative gigahertz frequency hopping approach of a slave Raman laser within an optical phase-locked loop(OPLL),which finds practical application in an atomic gravimeter,where the OPLL frequently switches between near-resonance lasers and significantly detuned Raman lasers.The method merges the advantages of rapid and extensive frequency hopping with the OPLL’s inherent low phase noise,and exhibits a versatile range of applications in compact laser systems,promising advancements in portable instruments.

Age of Loop Information with Flexible Transmission Enabled Communication and Control Co-Design in Industrial IoT

Precise and low-latency information transmission through communication systems is essential in the Industrial Internet of Things(IIoT).However,in an industrial system,there is always a coupling relationship between the control and communication components.To improve the system's overall performance,exploring the co-design of communication and control systems is crucial.In this work,we propose a new metric±Age of Loop Information with Flexible Transmission(AoLI-FT),which dynamically adjusts the maximum number of uplink(UL)and downlink(DL)transmission rounds,thus enhancing reliability while ensuring timeliness.Our goal is to explore the relationship between AoLI-FT,reliability,and control convergence rate,and to design optimal blocklengths for UL and DL that achieve the desired control convergence rate.To address this issue,we first derive a closed-form expression for the upper bound of AoLI-FT.Subsequently,we establish a relationship between communication reliability and control convergence rates using a Lyapunov-like function.Finally,we introduce an iterative alternating algorithm to determine the optimal communication and control parameters.The numerical results demonstrate the significant performance advantages of our proposed communication and control co-design strategy in terms of latency and control cost.

Optimizing the sulfur-resistance and activity of perovskite oxygen carrier for chemical looping dry reforming of methane

Perovskite oxides has been attracted much attention as high-performance oxygen carriers for chemical looping reforming of methane,but they are easily inactivated by the presence of trace H_(2)S.Here,we propose to modulate both the activity and resistance to sulfur poisoning by dual substitution of Mo and Ni ions with the Fe-sites of LaFeO_(3)perovskite.It is found that partial substitution of Ni for Fe substantially improves the activity of LaFeO_(3)perovskite,while Ni particles prefer to grow and react with H_(2)S during the long-term successive redox process,resulting in the deactivation of oxygen carriers.With the presence of Mo in LaNi_(0.05)Fe_(0.95)O_(3−σ)perovskite,H_(2)S preferentially reacts with Mo to generate MoS_(2),and then the CO_(2)oxidation can regenerate Mo via removing sulfur.In addition,Mo can inhibit the accumulation and growth of Ni,which helps to improve the redox stability of oxygen carriers.The LaNi_(0.05)Mo_(0.07)Fe_(0.88)O_(3−σ)oxygen carrier exhibits stable and excellent performance,with the CH_(4)conversion higher than 90%during the 50 redox cycles in the presence of 50 ppm H_(2)S at 800℃.This work highlights a synergistic effect in the perovskite oxides induced by dual substitution of different cations for the development of high-performance oxygen carriers with excellent sulfur tolerance.

Effects of interstitial cluster mobility on dislocation loops evolution under irradiation of austenitic steel

The evolution of dislocation loops in austenitic steels irradiated with Fe^(+)is investigated using cluster dynamics(CD)simulations by developing a CD model.The CD predictions are compared with experimental results in the literature.The number density and average diameter of the dislocation loops obtained from the CD simulations are in good agreement with the experimental data obtained from transmission electron microscopy(TEM)observations of Fe~+-irradiated Solution Annealed 304,Cold Worked 316,and HR3 austenitic steels in the literature.The CD simulation results demonstrate that the diffusion of in-cascade interstitial clusters plays a major role in the dislocation loop density and dislocation loop growth;in particular,for the HR3 austenitic steel,the CD model has verified the effect of temperature on the density and size of the dislocation loops.

Chemical looping reforming of the micromolecular component from biomass pyrolysis via Fe_(2)O_(3)@SBA-16

To solve the problems of low gasification efficiency and high tar content caused by solid–solid contact between biomass and oxygen carrier in traditional biomass chemical looping gasification process.The decoupling strategy was adopted to decouple the biomass gasification process,and the composite oxygen carrier was prepared by embedding Fe_(2)O_(3) in molecular sieve SBA-16 for the chemical looping reforming process of pyrolysis micromolecular model compound methane,which was expected to realize the directional reforming of pyrolysis volatiles to prepare hydrogen-rich syngas.Thermodynamic analysis of the reaction system was carried out based on the Gibbs free energy minimization method,and the reforming performance was evaluated by a fixed bed reactor,and the kinetic parameters were solved based on the gas–solid reaction model.Thermodynamic analysis verified the feasibility of the reaction and provided theoretical guidance for experimental design.The experimental results showed that the reaction performance of Fe_(2)O_(3)@SBA-16 was compared with that of pure Fe_(2)O_(3) and Fe_(2)O_(3)@SBA-15,and the syngas yield was increased by 55.3%and 20.7%respectively,and it had good cycle stability.Kinetic analysis showed that the kinetic model changed from three-dimensional diffusion to first-order reaction with the increase of temperature.The activation energy was 192.79 kJ/mol by fitting.This paper provides basic data for the directional preparation of hydrogen-rich syngas from biomass and the design of oxygen carriers for pyrolysis of all-component chemical looping reforming.

Ethane Chemical Looping Oxidative Dehydrogenation to Ethylene over Co_(2)O_(3)(Fe_(2)O_(3),NiO)/LaCoO_(3) Oxygen Carriers

Ethane chemical looping oxidative dehydrogenation(CL-ODH)to ethylene is a new technology for converting ethane to ethylene.In the current study MeO/LaCoO_(3)(MeO=Fe_(2)O_(3),NiO or Co_(2)O_(3))composite metal oxides were prepared via citrate gel and impregnation methods,and used as oxygen carriers for CL-ODH.X-ray diffraction results indicated that all oxygen carriers had a perovskite structure even after eight redox cycles.Under a reaction temperature of 650°C,a reaction pressure of 0.1 MPa,and a weight hourly space velocity(WHSV)of 7500 mL/(g·h),ethane conversion over Co_(2)O_(3)/LaCoO_(3) reached 100%and ethylene selectivity reached 60%,both of which were better than corresponding values attained over Fe_(2)O_(3)/LaCoO_(3) and NiO/LaCoO_(3).Ethylene selectivity remained stable for 80 cycles over Co_(2)O_(3)/LaCoO_(3),then decreased gradually after 80 cycles.X-ray photoelectron spectroscopy results and evaluation results indicated that lattice oxygen and O_(2)2-had a direct relationship with ethane conversion and ethylene selectivity.Co_(2)O_(3)/LaCoO_(3) exhibited a strong capacity to release and absorb oxygen,mainly due to interaction between Co_(2)O_(3) and LaCoO_(3).

Multitap RF Canceller with Single LMS Loop for Adaptive Co-Site Broadband Interference Cancellation

With the development of wireless communication technology,an urgent problem to be solved is co-site broadband interference on independent communication platforms such as satellites,space stations,aircrafts and ships.Also,the problem of strong selfinterference rejection should be solved in the co-time co-frequency full duplex mode which realizes spectrum multiplication in 5G communication technology.In the research of such interference rejection,interference cancellation technology has been applied.In order to reject multipath interference,multitap double LMS(Least Mean Square)loop interference cancellation system is often used for cancelling RF(Radio Frequency)domain interference cancelling.However,more taps will lead to a more complex structure of the cancellation system.A novel tap single LMS loop adaptive interference cancellation system was proposed to improve the system compactness and reduce the cost.In addition,a mathematical model was built for the proposed cancellation system,the correlation function of CP2FSK(Continuous Phase Binary Frequency Shift Keying)signal was derived,and the quantitative relationship was established between the correlation function and the interference signal bandwidth and tap delay differential.The steadystate weights and the expression of the average interference cancellation ratio(ICR)were deduced in the scenes of LOS(Line of Sight)interference with antenna swaying on an independent communication platform and indoor multipath interference.The quantitative relationship was deeply analyzed between the interference cancellation performance and the parameters such as antenna swing,LMS loop gain,and interference signal bandwidth,which was verified by simulation experiment.And the performance of the proposed interference cancellation system was compared with that of the traditional double LMS loop cancellation system.The results showed that the compact single LMS loop cancellation system can achieve an average interference rejection capability comparable to the double LMS loop cancellation system.

Generalized nth-Order Perturbation Method Based on Loop Subdivision Surface Boundary Element Method for Three-Dimensional Broadband Structural Acoustic Uncertainty Analysis

In this paper,a generalized nth-order perturbation method based on the isogeometric boundary element method is proposed for the uncertainty analysis of broadband structural acoustic scattering problems.The Burton-Miller method is employed to solve the problem of non-unique solutions that may be encountered in the external acoustic field,and the nth-order discretization formulation of the boundary integral equation is derived.In addition,the computation of loop subdivision surfaces and the subdivision rules are introduced.In order to confirm the effectiveness of the algorithm,the computed results are contrasted and analyzed with the results under Monte Carlo simulations(MCs)through several numerical examples.

Rapid and stable calcium-looping solar thermochemical energy storage via co-doping binary sulfate and Al–Mn–Fe oxides

Solar thermochemical energy storage based on calcium looping(CaL)process is a promising technology for next-generation concentrated solar power(CSP)systems.However,conventional calcium carbonate(CaCO_(3))pellets suffer from slow reaction kinetics,poor stability,and low solar absorptance.Here,we successfully realized high power density and highly stable solar thermochemical energy storage/release by synergistically accelerating energy storage/release via binary sulfate and promoting cycle stability,mechanical strength,and solar absorptance via Al–Mn–Fe oxides.The energy storage density of proposed CaCO_(3)pellets is still as high as 1455 kJ kg^(-1)with only a slight decay rate of 4.91%over 100 cycles,which is higher than that of state-of-the-art pellets in the literature,in stark contrast to 69.9%of pure CaCO_(3)pellets over 35 cycles.Compared with pure CaCO_(3),the energy storage power density or decomposition rate is improved by 120%due to lower activation energy and promotion of Ca^(2+)diffusion by binary sulfate.The energy release or carbonation rate rises by 10%because of high O^(2-)transport ability of molten binary sulfate.Benefiting from fast energy storage/release rate and high solar absorptance,thermochemical energy storage efficiency is enhanced by more than 50%under direct solar irradiation.This work paves the way for application of direct solar thermochemical energy storage techniques via achieving fast energy storage/release rate,high energy density,good cyclic stability,and high solar absorptance simultaneously.

Advances in the Research Application of Ultrasound Non-Invasive Stress-Strain Loop Technology in Cardiovascular Diseases

The ultrasound pressure-strain loop (PSL) technique is a non-invasive method of examining myocardial work, which takes into account the effect of cardiac afterload on deformation and combines the overall longitudinal strain force of the left ventricle with the changes in the left ventricular pressure, allowing earlier detection of possible subclinical cardiac damage in patients, and a more accurate and non-invasive assessment of the patient’s myocardial work performance. In this article, we will discuss the progress of PSL applications in cardiovascular diseases.

Hysteroscopic cervical biopsy for women with persistent human papillomavirus infection after loop electrosurgical excision procedure: A case report

BACKGROUNDAlmost all cases of cervical cancer can be attributed to human papillomavirus(HPV) infection. The loop electrosurgical excision procedure (LEEP) is widelyused to treat HPV-mediated disease;thus, cervical cancer is highly preventable.However, LEEP does not necessarily clear HPV rapidly and may affect theaccuracy of the results of ThinPrep cytology test (TCT) and cervical biopsy due tothe formation of cervical scars.CASE SUMMARYA 40-year-old woman underwent LEEP for cervical intraepithelial neoplasia grade1 approximately 10 years ago. Subsequent standard cervical cancer screeningsuggested persistent HPV-52 infection, but TCT results were negative. Cervicalbiopsy under colposcopy was performed thrice over a 10-year period, yieldingnegative pathology results. She developed abnormal vaginal bleeding after sexualactivity, persisting for approximately 1 year, and underwent hysteroscopy in ourhospital. Histopathologic evaluation confirmed adenocarcinoma in situ of theuterine cervix.CONCLUSIONPatients with long-term persistent, high-risk HPV infection and negative pathologyresults of cervical biopsy after LEEP are at risk of cervical cancer. Hysteroscopicresection of cervical canal tissue is recommended as a supplement tocervical biopsy because it helps define the lesion site and may yield a pathologicdiagnosis.

Unraveling the atomic interdiffusion mechanism of NiFe_(2_)O_(4) oxygen carriers during chemical looping CO_(2) conversion

By employing metal oxides as oxygen carriers,chemical looping demonstrates its effectiveness in transferring oxygen between reduction and oxidation environments to partially oxidize fuels into syngas and convert CO_(2) into CO.Generally,NiFe_(2_)O_(4) oxygen carriers have demonstrated remarkable efficiency in chemical looping CO_(2) conversion.Nevertheless,the intricate process of atomic migration and evolution within the internal structure of bimetallic oxygen carriers during continuous high‐temperature redox cycling remains unclear.Consequently,the lack of a fundamental understanding of the complex ionic migration and oxygen transfer associated with energy conversion processes hampers the design of high‐performance oxygen carriers.Thus,in this study,we employed in situ characterization techniques and theoretical calculations to investigate the ion migration behavior and structural evolution in the bulk of NiFe_(2_)O_(4) oxygen carriers during H_(2) reduction and CO_(2)/lab air oxidation cycles.We discovered that during the H_(2) reduction step,lattice oxygen rapidly migrates to vacancy layers to replenish consumed active oxygen species,while Ni leaches from the material and migrates to the surface.During the CO_(2) splitting step,Ni migrates toward the core of the bimetallic oxygen carrier,forming Fe–Ni alloys.During the air oxidation step,Fe–Ni migrates outward,creating a hollow structure owing to the Kirkendall effect triggered by the swift transfer of lattice oxygen.The metal atom migration paths depend on the oxygen transfer rates.These discoveries highlight the significance of regulating the release–recovery rate of lattice oxygen to uphold the structures and reactivity of oxygen carriers.This work offers a comprehensive understanding of the oxidation/reduction‐driven atomic interdiffusion behavior of bimetallic oxygen carriers.

Adverse Pregnancy Outcomes Following Cryotherapy, Thermal Ablation and Loop Electrosurgical Excision Procedure for Cervical Intraepithelial Neoplasia Treatment: A Pilot Study among Zambian Women

Background: Cervical Intraepithelial neoplasia treatments have become essential interventions to manage cervical lesions. Majority of the recipients of these treatments are women within the reproductive age group, who according to literature may be at risk of adverse pregnancy outcomes. This pilot study is part of a study investigating adverse pregnancy outcomes among women who received Cryotherapy, Thermal ablation and Loop Electrosurgical Excision Procedure compared to the untreated women in Zambia. Materials and Methods: This descriptive study analyzed records of 886 (n = 443 treated and n = 443 untreated) women aged 15 - 49 years. The women were either screened with Visual Inspection with Acetic Acid or treated for Cervical Intraepithelial neoplasia at the Adult Infectious Disease Centre between January 2010 and December 2020. Women meeting the criteria were identified using the Visual Inspection with Acetic Acid screening records and telephone interviews to obtain the adverse pregnancy outcome experienced. Data were analysed using STATA version 16 to determine the prevalence and obtain frequency distribution of outcomes of interest. Univariate and multivariable binary logistic regression estimated odds of adverse pregnancy outcomes across the three treatments. Results: The respondents were aged 15 to 49 years. Adverse pregnancy outcomes were observed to be more prevalent in the treatment group (18.5%) compared to the untreated group (5.4%). Normal pregnancy outcomes were lower in the treated (46.3%;n = 443) than the untreated (53.7%;n = 443). The treated group accounted for the majority of abortions (85.2%), prolonged labour (85.7%) and low birth weight (80%), whereas, the untreated accounted for the majority of still births (72.7%). Women treated with cryotherapy (aOR = 2.43, 95% CI = 1.32 - 4.49, p = 0.004), thermal ablation (aOR = 6.37, 95% CI = 0.99 - 41.2, p = 0.052) and Loop Electrosurgical Excision Procedure (aOR = 9.67, 95% CI = 2.17 - 43.1, p = 0.003) had two-, six- and ten-times higher odds of adverse pregnancy outcomes respectively, relative to women who required no treatment. Conclusion: Adverse pregnancy outcomes are prevalent among women who have received treatment in Zambia. The findings indicate that treating Cervical Intraepithelial Neoplasia has been linked to higher chances of experiencing abortion, delivering low birth weight babies and enduring prolonged labor that may result in a caesarean section delivery. Cervical neoplasia treatments, particularly Loop Electrosurgical Excision Procedure, are associated with significantly increased odds of adverse pregnancy outcomes. It is essential to include information about prior Cervical Intraepithelial neoplasia treatment outcomes in obstetric care.

CO_(2)capture costs of chemical looping combustion of biomass:A comparison of natural and synthetic oxygen carrier

Chemical looping combustion has the potential to be an efficient and low-cost technology capable of contributing to the reduction of the atmospheric concentration of CO_(2) in order to reach the 1.5/2°C goal and mitigate climate change.In this process,a metal oxide is used as oxygen carrier in a dual fluidized bed to generate clean CO_(2) via combustion of biomass.Most commonly,natural ores or synthetic materials are used as oxygen carrier whereas both must meet special requirements for the conversion of solid fuels.Synthetic oxygen carriers are characterized by higher reactivity at the expense of higher costs versus the lower-cost natural ores.To determine the viability of both possibilities,a techno-economic comparison of a synthetic material based on manganese,iron,and copper to the natural ore ilmenite was conducted.The synthetic oxygen carrier was characterized and tested in a pilot plant,where high combustion efficiencies up to 98.4%and carbon capture rates up to 98.5%were reached.The techno-economic assessment resulted in CO_(2) capture costs of 75 and 40€/tCO_(2) for the synthetic and natural ore route respectively,whereas a sensitivity analysis showed the high impact of production costs and attrition rates of the synthetic material.The synthetic oxygen carrier could break even with the natural ore in case of lower production costs and attrition rates,which could be reached by adapting the production process and recycling material.By comparison to state-of-the-art technologies,it is demonstrated that both routes are viable and the capture cost of CO_(2) could be reduced by implementing the chemical looping combustion technology.