A Preliminary Study on Fluid Inclusions and Mineralization of Xitieshan Sedimentary-Exhalative (SEDEX) Lead-Zinc Deposit

The Xitieshan lead-zinc deposit is located at the northern margin of the Qaidam Basin, Qinghai Province, China, and had developed a complete marine sedimentary-exhalative system. Our preliminary study of ore-forming fluids shows that fluid inclusions in quartz from altered stockwork rocks that represent the pipe facies have a wide range of temperature and salinity. The intense fluid activities are characteristics of the pipe facies of the exhalative system. Fluid inclusions in carbonates near the unstratified ore bodies hosted in the thick-bedded marble which represents vent-proximal facies are large in size and have moderate to high temperatures. They represent unerupted sub-seafloor fluid activity. Fluids in altered stockwork rocks and carbonates have similar H20-NaCI-CO2 system, both belonging to the sedimentary-exhalative system. The fluids migrate from the pipe facies to the unstratified ore bodies. Boiling of the fluids causes the separation of CO2 vapor and liquid H2O. When the fluids migrate into the unconsolidated thick-bedded marble, the escape of CO2, decreasing temperature and pressure as well as some involvement of seawater into the fluids result in the unmixing of fluids with high and low salinity and deposition of ore-forming materials. The two unmixed fluids were trapped in unconsolidated carbonates and the ore-forming materials were deposited in the unconsolidated carbonates to form the sedimentary-exhalative type unstratified ore bodies. The oreforming temperature of unstratified ore bodies is up to high temperature indicating that there is a huge ore-forming potential in its deep.

Imaging the Architecture of Mineral Systems and the Pathways of Ore-forming Fluids across Mongolia with Magnetotellurics

In the framework of a mineral system approach,a combination of components is required to develop a mineral system.This includes the whole-lithosphere architecture,which controls the transport of ore-forming fluids,and favorable tectonic and geodynamic processes,occurring at various spatial and temporal scales,that influence the genesis and evolution of ore-forming fluids(Huston et al.,2016;Groves et al.,2018;Davies et al.,2020).Knowledge of the deep structural framework can advance the understanding of the development of a mineral system and the emplacement of mineral deposits.Deep geophysical exploration carried out with this aim is increasingly important for targeting new ore deposits in unexplored and underexplored regions(Dentith et al.,2018;Dentith,2019).

Geochemistry, mineral paragenesis and geothermal conditions of oreforming fluids from the Ain El Bey Cu–Fe deposit: potential occurrence of native gold and precious metal traces (North African orogenic belt, Northern Tunisia)

The Ain El Bey abandoned mine, in North-West Tunisia, fits into the geodynamic context of the European and African plate boundary. Ore deposit corresponds to veins and breccia of multiphase Cu–Fe-rich mineralization related to various hydrothermal fluid circulations. Petromineralogical studies indicate a rich mineral paragenesis with a minimum of seven mineralization phases and, at least, six pyrite generations. As is also the case for galena and native silver, native gold is observed for the first time as inclusion in quartz which opens up, thus, new perspectives for prospecting and evaluating the potential for noble metals associated with the mineralization. Scanning Electron Microscope--Energy Dispersive Spectroscopy and Transmission electron microscopy analyses show, in addition, a large incorporation of trace elements, including Ag and Au, in mineral structures such as fahlores(tetrahedrite-tennantite) and chalcopyrite ones. The mineral/mineral associations, used as geothermometers, gave estimated temperatures for the mineralizing fluids varying from 254 to 330 ℃ for phase Ⅲ, from 254 to 350 ℃ for phase Ⅳ, and from 200 to 300 ℃ for phases Ⅴ and Ⅵ. The seventh and last identified mineralization phase, marked by a deposit of native gold, reflects a drop in the mineralizing fluid’s temperature(< 200 ℃) compatible with boiling conditions. Such results open up perspectives for the development of precious metal research and the revaluation of the Cu–Fe ore deposit at the Ain El Bey abandoned mine, as well as at the surrounding areas fitting in the geodynamic framework of the Africa-Europe plate boundary.

Analysis of Mineralization System and Prediction of New-Type Ore Deposits

The discovery of new-type ore deposits, an important approach to guarantee the mineral resources supply in the 21st century, often brings about a gigantic increase in the mineral resources reserves. The analysis of mineralization system is of great importance to the discovery of new type ore deposits. ① The understanding of the relationship among various ore deposit types within a mineralization system in a region can help us to locate the unknown ore deposit types from the known ore deposit types, evidence that has been proved in the mineral prospecting history of ore belts in the middle and lower reaches of the Yangtze River, China. ② The understanding of the spatial structure of a mineralization system, especially of the vertical zonation, is helpful for the discovery of the concealed ore deposit types. ③ Clarifying the temporal structure of a mineralization system, including the iteration relationship between the mineral deposit types in the mineralization, leads to the location of the missing mineralization chains from the known mineralization chains (mineral deposit type), a method often proved to be effective in the magmatic hydrothermal mineralization system.④ Clarifying the factors restraining the diversity of mineral deposit types in mineralization system leads to the discovery of the potential of new type mineral deposits in relevant region. ⑤ Studying new mineralization setting and new ore forming processes leads to discovery of new type mineral deposit. More probabilities of discovery of new type mineral deposits are present in biogenic mineralization system, deep sea mineralization system, low temperature mineralization system, tectonic mineralization system and superimposed mineralization system.

A New Potential Caledonian–Indosinian Ore Concentration Area:Evidence from Diagenesis and Mineralization Ages of the Miao'ershan–Yuechengling Region

Objective The Miao＇ershan-Yuechengling composite granite, located in northern Guangxi at the western section of the Nanling Range, is a multi-period and multi-stage composite pluton with an exposed area of more than 3000 km2 （Fig. 1）. Paleozoic and Proterozoic strata are exposed around it, and magmatic activities mainly occurred during the Caledonian and Indosinian periods. Till now, more than one hundred W-Sn-Mo-Pb-Zn-Cu （U） deposits and ore occurrences have been discovered along the inner and outer contact zones of this granite. Through recent years＇ research, we infer that this area is not only a preferred area for studying granite and mineralization in Caledonian and lndosinian periods, but also a potential Caledonian- lndosinian ore-concentrated area.

Magmatic Evolution and Mineralization of Porphyry Copper-Gold Deposits in the Duolong Ore Concentration Area, Tibet

The Bangong Lake-Nujiang River metallogenic belt is located between the Qiangtang Block and Lhasa Block, and the Duolong ore concentration area is located in the western section of the Bangong Lake-Nujiang River metallogenic belt. Till now, several large and super large copper-gold deposits, such as Duobuza, Bolong, Dibaonamugang, Naruo and Rongna deposits have been discovered in this area, mainly porphyry copper-gold ones.

Formation of the Devonian Fengtai Hydrothermal Brine Basin and the Metallogeny of Gold and Lead-Zinc Mineralizations in Shaanxi

The study of the relationships between the hydrothermal sedimentary formations and the gold and lead-zinc mineralizations in the Devonian Fengtai basin in Shaanxi shows that there was a hydrothermal brine sedimentary event which was inserted into the normal sedimentary background from the late Middle Devonian to the early Late Devonian. This event is closely related to gold and lead-zinc mineralizations in this area.

DIWA TYPE OF GOLD MINERALIZATION IN THE YINSHAN-YANSHAN-LIAO-JI ORE BELT,CHINA

This studied gold ore belt is giant and very important in China. Its regional tectonics and evolutional process are complicated. There are a few of view points on its geotec-tonic attribute in the Mesozoic and Cenozoic eras and on the type of its some gold ore deposits, especially, on one hosted in the pre-diwa geological bodies. On the basis of the diwa theory, the author discussed the regionalization, and its evolutional process, and some features of diwa tectono-magmatism and diwa type of gold mineralization in this belt. The author proposed that(1)the main body zone is a part of the diwa regime in the Mesozoic and Cenozoic eras, and(2)the diwa tectono-magmatism had a series of features such as universalism and violence, newborn, reform and superimposition, joining, inheritance, multiperiodic activity, complica-tion and so on. The gold mineralization formed in the diwa regime are called diwa type of golddeposits.In this paper the diwa type of endogenetic gold mineralization products hosted in the pre-diwa geological bodies in this zone is discussed in detail.

Study on Epithermal Gold Mineralization System at Shwebontha Prospect,Monywa Copper-Gold Ore Field,Central Myanmar

The Shwebontha prospect area is situated in the Central Volcanic Belt,central Myanmar,where the well-known Sagaing Fault serves as its eastern boundary.This study aims to document key the mineralogy,host rock geochemistry and ore mineralizing fluids.The mineralization,hosted by Upper Oligocene to Middle Miocene rhyolites,displays a strong lithological control.Mineralization is characterized by gold-bearing silicified massive ore and chalcedonic quartz veins in which sulfides are clustered and disseminated not only in quartz gangue but also in rhyolite host rocks.The significant ore minerals in the mineralized veins include pyrite,sphalerite,galena,chalcopyrite,and gold.Common hydrothermal alterations such as silicic,argillic and propylitic alteration types are recognized.According to the fluid inclusion data and interpretation,ore mineralizing fluids in the research area are characterized by formation temperatures of 260-280℃ and salinity of 0.35-2.41%wt.NaCl eq.respectively.Mixing of hydrothermal fluids was generally considered to be an effective mechanism for ore transport and deposition.

Mineral processing plant location using the analytic hierarchy process——a case study:the Sangan iron ore mine(phase 1)

Locating the mineral processing plant near a mine is the most important parameter that affects the whole process.Many factors,and their preferences,should be considered in this stage.The factors include economical,geological,technical,environmental and tectonic parameters.A multi-criteria decision making method is necessary to rank the alternatives.In this paper we describe how plant location is selected by using the Analytic Hierarchy Process(AHP).This method,with eight criteria,was used to select a location for the mineral processing plant at the Sangan iron ore mine(phase 1).Three alternatives for the processing plant were evaluated.The main criteria were distance from the mine,access to heavy machinery transport,the amount of excavation required for grading,bed mixture capacity,belt conveyor length,distance from the tailing dam,distance from the waste dumps and surface water diversion requirements.Finally,the alternatives were ranked and the best location was proposed.

Diversity of Mineralization and Spectrum of the Gejiu Superlarge Tin-Copper Polymetallic Deposit,Yunnan,China

The Gejiu （个旧） deposit is a superlarge tin-copper polymetallic ore-forming concentration area characterized by excellent metallogenic geological settings and advantageous ore-controlling factors. The deposit displays diverse mineralization properties due to different minerals and mineral deposit types. Based on the principal metallogenic factors, metallogenic mechanisms, mineralized components, and occurrence of mineral deposits or ore bodies, the Gejiu mineral district can be divided into 2 combinations of metallogenic series, 4 metallogenic series, 8 subseries, and 27 mineral deposit types. Spatial zonality is evident. The distribution regularity of the elements in both plane and section is Be-W, Sn （Cu, Mo, Bi, Be）-Sn, Pb, Ag-Pb, Zn around a granitic intrusion. The metallogenic epoch is mainly concentrated in the late Yanshanian. During this period, large-scale metallogenic processes related to movement caused by tectonics and magmatism occurred, and a series of magmatic hydrothermal deposits formed. The ore-forming processes can be divided into 4 stages： the silicate stage, the oxide stage, the sulphide stage, and the carbonate stage. Based on the orderliness and diversity （in terms of time, space, and genesis） of the mineralization, the authors have developed a comprehensive spectrum of ore deposits in the Gejiu area. This newly proposed diversity of mineralization and the spectrum developed in this work are useful not only for interpreting the genesis of the Gejiu deposit but also for improving mineral exploration in the area, and in particular, for finding large deposits.

Metallogeny of the Baiyangping Lead-Zinc Polymetallic Ore Concentration Area, Northern Lanping Basin of Yunnan Province, China

The Lanping Basin in the Nujiang-Lancangjiang-Jinshajiang （the Sanjiang） area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment-hosted Pb-Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India-Asia continental coUisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the oreforming elements in the east ore belt are mainly Pb-Zn -Sr-Ag, while Pb-Zn-Ag-Cu-Co elements are dominant in the west ore belt. Comparative analysis of the C-O-Sr-S-Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore- forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb-Zn mineralization age of both ore belts was contemporary and formed in the same metaliogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.

Use of high-resolution X-ray computed tomography and 3D image analysis to quantify mineral dissemination and pore space in oxide copper ore particles

Mineral dissemination and pore space distribution in ore particles are important features that influence heap leaching performance. To quantify the mineral dissemination and pore space distribution of an ore particle, a cylindrical copper oxide ore sample (I center dot 4.6 mm x 5.6 mm) was scanned using high-resolution X-ray computed tomography (HRXCT), a nondestructive imaging technology, at a spatial resolution of 4.85 mu m. Combined with three-dimensional (3D) image analysis techniques, the main mineral phases and pore space were segmented and the volume fraction of each phase was calculated. In addition, the mass fraction of each mineral phase was estimated and the result was validated with that obtained using traditional techniques. Furthermore, the pore phase features, including the pore size distribution, pore surface area, pore fractal dimension, pore centerline, and the pore connectivity, were investigated quantitatively. The pore space analysis results indicate that the pore size distribution closely fits a log-normal distribution and that the pore space morphology is complicated, with a large surface area and low connectivity. This study demonstrates that the combination of HRXCT and 3D image analysis is an effective tool for acquiring 3D mineralogical and pore structural data.

Organic Gases in Fluid Inclusions of Ore Minerals and Their Constraints on Ore Genesis:A Case Study of the Changkeng Au-Ag Deposit,Guangdong,China

The newly discovered Changkeng Au-Ag deposit is a new type of sediment-hostedprecious metal deposit. Most of the previous researchers believed that the deposit was formed bymeteoric water convection. By using a high vacuum quadrupole gas mass spectrometric system, ninelight hydrocarbons have been recognized in the fluid inclusions in ore minerals collected from theChangkeng deposit. The hydrocarbons are composed mainly of saturated alkanes C_(1-4) and unsaturatedalkenes C_(2-4) and aromatic hydrocarbons, in which the alkanes are predominant, while the contentsof alkenes and aromatic hydrocarbons are very low. The sum alka/sum alke ratio of most samples ishigher than 100, suggesting that those hydrocarbons are mainly generated by pyrolysis of kerogens insedimentary rocks caused by water-rock interactions at medium-low temperatures, and themetallogenic processes might have not been affected by magmatic activity. A thermodynamiccalculation shows that the light hydrocarbons have reached chemical equilibrium at temperatureshigher than 200 deg C, and they may have been generated in the deep part of sedimentary basins(e.g., the Sanzhou basin) and then be transported by ore-forming fluids to a shallow position of thebasin via a long distance. Most of the organic gases are generated by pyrolysis of the type IIkerogens (kukersite) in sedimentary host rocks, only a few by microorganism activity. Thecompositions and various parameters of light hydrocarbons in gold ores are quite similar to those insilver ores, suggesting that the gold and silver ores may have similar metallogenic processes.Based on the compositions of organic gases in fluid inclusions, the authors infer that the Changkengdeposit may be of a tectonic setting of continental rift. The results of this study support fromone aspect the authors' opinion that the Changkeng deposit is not formed by meteoric waterconvection, and that its genesis has a close relationship with the evolution of the Sanzhou basin,so it belongs to the sedimentary hot brine transformed deposit.

Fluid Inclusion Studies of Ore and Gangue Minerals from the Piaotang Tungsten Deposit, Southern Jiangxi Province, China

The Piaotang deposit is one of the largest vein-type W-polymetallic deposits in southern Jiangxi Province,South China.The coexistence of wolframite and cassiterite is an important feature of the deposit.Based on detailed petrographic observations,microthermometry of fluid inclusions in wolframite,cassiterite and intergrown quartz was undertaken.The inclusions in wolframite were observed by infrared microscope,while those in cassiterite and quartz were observed in visible light.The fluid inclusions in wolframite can be divided into two types:aqueous inclusions with a large vapor-phase proportion and aqueous inclusions with a small vapor-phase ratio.The homogenization temperature(Th)of inclusions in wolframite with large vapor-phase ratios ranged from 280℃ to 390℃,with salinity ranging from 3.1 to 7.2 wt%NaCl eq.In contrast,the Th values of inclusions with small vapor-phase ratios ranged from 216℃ to 264℃,with salinity values ranging from 3.5 to 9.3 wt%NaCl eq.T_(h) values of primary inclusions in cassiterite ranged from 316℃ to 380℃,with salinity ranging from 5.4 to 9.3 wt%NaCl eq.T_(h) values for primary fluid inclusions in quartz ranged from 162℃ to 309℃,with salinity values ranging from 1.2 to 6.7 wt%NaCl eq.The results show that the formation conditions of wolframite,cassiterite and intergrown quartz are not uniform.The evolutionary processes of fluids related to these three kinds of minerals are also significantly different.Intergrown quartz cannot provide the depositional conditions of wolframite and cassiterite.The fluids related to tungsten mineralization for the NaCl-H_(2)O system had a medium-to-high temperature and low salinity,while the fluids related to tin mineralization for the NaCl-H_(2)O system had a high temperature and medium-to-low salinity.The results of this study suggest that fluid cooling is the main mechanism for the precipitation of tungsten and tin.

Effect of temperature on leaching behavior of copper minerals with different occurrence states in complex copper oxide ores

The effect of temperature on leaching behavior of copper minerals with different occurrence states in complex copper oxide ores was carried out by phase analysis means of XRD, optical microscopy and SEM-EDS. The results indicated that at ambient temperature, the easily leached copper oxide minerals were completely dissolved, while the bonded copper minerals were insoluble. At lukewarm temperature of 40℃, it was mainly the dissolution of copper in isomorphism state. With increasing temperature to 60℃, the copper leaching rate in the adsorbed state was significantly accelerated. In addition, when the temperature increased to 80℃, the isomorphic copper was completely leached, leaving 11.2% adsorbed copper un-leached. However, the copper in feldspar-quartz-copper-iron colloid state was not dissolved throughout the leaching process. Overall, the leaching rates of copper in different copper minerals decreased in the order: malachite, pseudo-malachite > chrysocolla > copper-bearing chlorite > copper-bearing muscovite > copper-bearing biotite > copper-bearing limonite > feldspar-quartz-copper-iron colloid.

Spatial and Temporal Distribution of Au and Pb-Zn Mineralization:Phenomenon,Mechanism and Implication

In the 1990s, some median-large gold deposits have been discovered in several lead-zinc metallogenetic belts (e.g. the Qinling lead-zinc metallogenetic belt, Shanxi Province and Gansu Province and the Qingchengzi lead-zinc ore field, Liaoning Province) in China. Gold deposits and lead-zinc deposits spatially co-exist in the same tectonic setting; lead-zinc orebodies are commonly located below gold ore bodies. The host rocks of lead-zinc ore-bodies are conformably overlain by those of gold ore bodies. The age of gold mineralization is obviously younger than that of lead-zinc mineralization. Preliminary geochemical research has demonstrated the following: lead-zinc mineralization took place in a marine sedimentary-exhalative system, which had the characteristics of a high fluid/rock ratio, a high salinity and a high halide activity; meanwhile, most of gold was transported into the low-temperature hydrothermal plume and primarily enriched in sediments. During later (magmatism-) metamorphism- tectonism, gold was remobilized and transported into the metamorphic fluid which had the characteristics of medium- high temperatures, a low fluid/rock ratio and a low activity of halide, and precipitated at a favourable structural site. Therefore, the co-existence of gold and lead-zinc deposits and the separation of gold from lead-zinc result from the differences of chemical composition and circulation of ore fluids in the same tectonic unit. This phenomenon can be used as an important criterion in exploration.

Study on experiment and mechanism of thermal dissolved sulfuration of low grade lead-zinc oxide ore in lanpin

The thermal dissolved sulfuration technology is brought forward and performed based on the characteristic of low grade lead-zinc oxide ore in lanpin. Using sulfur as the sulphidizing agent in the experiment, the oxides in the sandstone and ignimbrite are changed into sulfides. The disproportionation reaction of sulfur in a solution is confirmed as 4S＋3H2O=2S^2-＋S2O3^2--＋6H^＋. The dynamics process is studied and the first-order reaction rate equation -1n（1-a）=ktt is obtained. The effects of the reactive products, stirring speed, dosage of sulfuration agent, value of pH and sulphidizing temperature on the sulfuration of oxide ore are investigated. The results indicate that the reactive apparent activation energy is 100.8 kJ/mol and the sulfuration ratio of lead-zinc oxide ore reaches 60% under the conditions of pH 5.9-7.5, the sulfuration temperature of 130 ℃, sulfuration time of 180 min and the stirring speed of 800 r/min.

Geology and mineralization of the Pulang supergiant porphyry copper deposit(5.11 Mt)in Shangri-la,Yunnan Province,China:A review

The porphyry copper belt in the Geza island arc in southwestern China is the only Indosinian porphyry copper metallogenic belt that has been discovered and evaluated so far.The Pulang porphyry copper deposit(also referred to as the Pulang deposit)in this area has proven copper reserves of 5.11×106 t.This deposit has been exploited on a large scale using advanced mining methods,exhibiting substantial economic benefit.Based on many research results of previous researchers and the authors’team,this study proposed the following key insights.(1)The Geza island arc was once regarded as an immature island arc with only andesites and quartz diorite porphyrites occurring.This understanding was overturned in this study.Acidic endmember components such as quartz monzonite porphyries and quartz monzonite porphyries have been identified in the Geza island arc,and the mineralization is mainly related to the magmatism of quartz monzonite porphyries.(2)Complete porphyry orebodies and large vein orebodies have developed in the Pulang deposit.Main orebody KT1 occurs in the transition area between the potassium silicate alteration zone of quartz monzonite porphyries and the sericite-quartz alteration zone.Most of them have developed in the potassium silicate alteration zone.The main orebody occurs as large lenses at the top of the hanging wall of rock bodies,with an engineering-controlled length of 1920 m and thickness of 32.5‒630.29 m(average:187.07 m).It has a copper grade of 0.21%-1.56%(average:0.42%)and proven copper resources of 5.11×10^(6) t,which are associated with 113 t of gold,1459 t of silver,and 170×10^(3) t of molybdenum.(3)Many studies on diagenetic and metallogenic chronology,isotopes,and fluid inclusions have been carried out for the Pulang deposit,including K-Ar/Ar-Ar dating of monominerals(e.g.,potassium feldspars,biotites,and amphiboles),zircon U-Pb dating,and molybdenite Re-Os dating.The results show that the porphyries in the Pulang deposit are composite plutons and can be classified into pre-mineralization quartz diorite porphyrites,quartz monzonite porphyries formed during the mineralization,and post-mineralization granite porphyries,which were formed at 223±3.7 Ma,218±4 Ma,and 207±3.9 Ma,respectively.The metallogenic age of the Pulang deposit is 213‒216 Ma.(4)The petrogeochemical characteristics show that the Pulang deposit has the characteristics of volcanic arc granites.The calculation results of trace element contents in zircons show that quartz monzonite porphyries and granite porphyries have higher oxygen fugacity.The isotopic tracing results show that the diagenetic and metallogenic materials were derived from mixed crust-and mantle-derived magmas.

Recycle of Wastewater from Lead-Zinc Sulfide Ore Flo-tation Process by Ozone/BAC Technology

Lead-zinc sulphide ore contains lead sulphide (galena), and zinc sulphide (sphalerite). In the first flotation stage, galena is rendered hydrophobic with an organic collector such as xanthate, while sphalerite is kept from floating by depressants, and in the second flotation stage, activator was used to activated zinc flotation. Since the organic regent used are different in the two flotation stage, wastewater from the second zinc flotation stage can’t be directly recycled to the first lead flotation stage. Wastewater from flotation process for concentrating lead-zinc sulphide ore often containing organic compounds such as diethyldithiocarbamate(DDTC), xanthate, terpenic oil(2# oil) and thionocarbamate esters (Z-200), are environmentally hazardous. Their removal from contaminated water and the reuse of the water is one of the main challenges facing lead-zinc sulphide ore processing plants. In this study, synthetic wastewater containing DDTC, xanthate, 2# oil and Z-200 at concentrations ranging from 21 to 42 mg/L was fed into an Ozone/Biological activated carbon (BAC) reactor. Analyses of the effluent indicated a chemical oxygen demand (COD) removal over 86.21% and Total organic carbon (TOC) removal over 90.00% were achieved under Hydraulic retention time (HRT) of 4h and O3 feeding concentration of 33.3mg/L. The effluent was further recycled to the lab scale lead concentrating process and no significant difference was found in compare with fresh water. Furthermore, lead-zinc sulphide mineral concentrating process was carried out at lab scale. The produced wastewater was treated by Ozone/BAC reactor at O3 feeding concentration of 16.7mg/L and HRT of 4h. The effluent analysis showed that TOC removal was 74.58%. This effluent was recycled to the lab scale lead-zinc sulphide mineral concentrating process and the recovery of lead was not affected. The results showed that by using Ozone/BAC technology, the lead-zinc sulphide mineral processing wastewater could be recycled.