There are frequent failures in the project delivery in time and increasing the waste in Oman construction industry.Lean Construction(LC)principles which are lean thinking in design and construction process may be a po...There are frequent failures in the project delivery in time and increasing the waste in Oman construction industry.Lean Construction(LC)principles which are lean thinking in design and construction process may be a possible solution.Hence,the paper is aimed on exploring the status of the LC practices and its impact on Omani Construction Industry(OCI).The paper presents barriers,potential benefits,and the measures of suitability and acceptability of LC principles.A quantitative research approach was adopted and research data was collected using an online questionnaire survey in Oman.The data were analysed and results are presented in tables and charts followed by critical discussions.The survey found that onethird of the construction professionals have a good awareness and half of them having a higher level awareness about LC practices.More than one third of the construction organisations are adopting LC principles with a high consensus on the suitability and acceptability,and they recognised that time commitment is necessary for the successful implementation and achieve benefits.The study concludes that the reduction in project delivery time and construction at site waste is the key advantage of implementing LC priciples in design and construction stages in the omani construction industry.展开更多
The objective of this ongoing joint research program is to determine how 3D/4D modeling, simulation and visualization of Products (buildings), Organizations and Processes (POP) can support lean construction. Initial f...The objective of this ongoing joint research program is to determine how 3D/4D modeling, simulation and visualization of Products (buildings), Organizations and Processes (POP) can support lean construction. Initial findings suggest that Process Design Pattern may have the potential to intuitively support ICT based lean construction. We initiated a 'Process Archeology' in order to reveal the requirements for tools that can support the planning, simulation and control of lean construction methods. First findings show that existing tools provide only limited support and therefore, we started to develop new methodologies and technologies to overcome these shortcomings. Through the introduction of Process Design Patterns, we intent to establish process thinking in the interdisciplinary POP design. Optimized construction processes may be synthesized with semi-automatic methods by applying Process Design Patterns on building structures. By providing process templates that integrate problem solution and expert knowledge, Process Design Patterns may have the potential to ensure high quality process models.展开更多
The integration of building information modeling(BIM)and lean construction(LC)provides a solution for the management of megaprojects.Previous studies have generally focused on the theoretical or empirical adoption of ...The integration of building information modeling(BIM)and lean construction(LC)provides a solution for the management of megaprojects.Previous studies have generally focused on the theoretical or empirical adoption of BIM and LC.Moreover,only a few studies have examined the approach of simultaneously using BIM and LC in megaprojects.Therefore,an intensive study on the application of BIM and LC in megaprojects,particularly to explore considerably effective integrated application modes of BIM and LC in megaprojects,will substantially promote the management efficiency of megaprojects.The current study describes a method that integrates owner-dominated BIM and LC that was developed in a case study.The proposed method provides a framework for all stakeholders to use BIM and LC in a megaproject dominated by the owner.The interactional relations among the owner,BIM,and LC were analyzed and positive interactions were identified.These positive interactions served as a basis for the implementation of this integrated approach in a case study and could be applied to other megaprojects.The megaproject(i.e.,airport construction project)was examined to verify the performance of the developed method.Results showed that the integration of BIM and LC dominated by the owner can improve management performance and achieve high quality standard.展开更多
Performance measurement(PM)generates useful data for process control,facilitates communication between different sectors,and helps to align efforts on the most important aspects of the business.Thus,PM plays a key rol...Performance measurement(PM)generates useful data for process control,facilitates communication between different sectors,and helps to align efforts on the most important aspects of the business.Thus,PM plays a key role in the management of projects and organizations.PM is also important in the implementation of lean production principles and methods,such as reducing the share of nonvalue-adding activities,increasing process transparency,building continuous improvement into the process,and benchmarking.Moreover,the adoption of the lean production philosophy requires changes in PM.Despite its importance,limited studies have been conducted on the use of PM systems for assessing the impact of lean production programs in construction projects.In addition,studies on how lean companies(or projects)use performance measurement and to what extent the indicators adopted reflect the result of actions that have been undertaken are limited.This study proposes a set of requirements in PM systems of construction projects from the perspective of lean production and a taxonomy of performance metrics for lean production systems.Five empirical studies have been carried out on construction companies from South America involved in the implementation of lean production systems.The scope of this investigation is limited to the construction projects as production systems rather than PM at the level of construction organizations.展开更多
The construction industry is facing a gradual but important transformation toward more productivity and collaboration.In this framework,two major approaches are often cited in the literature as having the potential to...The construction industry is facing a gradual but important transformation toward more productivity and collaboration.In this framework,two major approaches are often cited in the literature as having the potential to improve the practices in the industry:Building Information Modeling(BIM)and Lean Construction.Several scientific studies have demonstrated the synergy of these two approaches and very recent research has reported positive results from the use of software applications as support for their implementation on construction sites.However,the stakes of such integration have been very little studied.This article presents the results of a research project conducted within a general contractor firm that decided to implement BIM and Last Planner System(LPS)on its construction sites.The research uses a four-stage action research approach,including the characterization of the research issue,the establishment of an action plan,its implementation and its evaluation.Compared to recent related studies,the research is less enthusiastic.While it highlights the need for new tools to improve production planning and control,it also points to a strong resistance to change by practitioners at the site.They emphasize the necessity for adequate pre-service training and the need for new resources that can work flill-time on the ongoing training of site teams.In addition,some limitations of the tool lead workers to believe that it can quickly become a factor that slows down their daily work rather than improving it.Based on the advice of professionals,the paper formulates some recommendations to the industry,the researchers and the software developers.展开更多
While logistics comprises an important part of tunneling costs,it is generally not considered a lever of performance but rather a con-straint to a project’s progress.This study presents some insights on how smart tec...While logistics comprises an important part of tunneling costs,it is generally not considered a lever of performance but rather a con-straint to a project’s progress.This study presents some insights on how smart technology can impact the tunneling industry.The impact is even greater because of the complexity of the tunneling supply chain,and smart technology could help support this process.Finally,we discuss how the nature of the tunneling industry invites stakeholders to develop a common understanding of the project prior to con-struction to successfully deploy smart technology during the use or maintenance phase.展开更多
This study provides a critical review of the concepts of Agile,Lean,Scrum,and Last Planner®System(LPS).A comparative analysis is conducted between LPS and Scrum to expand LPS by considering Scrum’s best practice...This study provides a critical review of the concepts of Agile,Lean,Scrum,and Last Planner®System(LPS).A comparative analysis is conducted between LPS and Scrum to expand LPS by considering Scrum’s best practices.Eight dimensions,namely,1)origins,2)main purpose,3)overall system/framework process,4)tools or artifacts maintained by the team,5)team composition and main roles,6)regular events or team meetings,7)metrics/dashboards,and 8)approach to learning,are evaluated.After analyzing side by side the eight dimensions,it was found that many aspects from Scrum already exist in LPS in the same or similar form.However,the authors identify four main elements from Scrum that can be leveraged to improve the LPS benchmark,such as considering the Scrum“Increment”concept into LPS,having a clear definition of roles and responsibilities,or adding an equivalent to a Scrum Master to have a designated"rule keeper”in LPS.These opportunities to be considered in new LPS benchmarks need to be tested and validated with real applications.To the best of the authors5 knowledge,this work is the first to comprehensively compare Scrum(Agile)and LPS(Lean)and could be seen as a contribution toward the evolution of the Last Planner System for the academic and industrial environments.展开更多
文摘There are frequent failures in the project delivery in time and increasing the waste in Oman construction industry.Lean Construction(LC)principles which are lean thinking in design and construction process may be a possible solution.Hence,the paper is aimed on exploring the status of the LC practices and its impact on Omani Construction Industry(OCI).The paper presents barriers,potential benefits,and the measures of suitability and acceptability of LC principles.A quantitative research approach was adopted and research data was collected using an online questionnaire survey in Oman.The data were analysed and results are presented in tables and charts followed by critical discussions.The survey found that onethird of the construction professionals have a good awareness and half of them having a higher level awareness about LC practices.More than one third of the construction organisations are adopting LC principles with a high consensus on the suitability and acceptability,and they recognised that time commitment is necessary for the successful implementation and achieve benefits.The study concludes that the reduction in project delivery time and construction at site waste is the key advantage of implementing LC priciples in design and construction stages in the omani construction industry.
文摘The objective of this ongoing joint research program is to determine how 3D/4D modeling, simulation and visualization of Products (buildings), Organizations and Processes (POP) can support lean construction. Initial findings suggest that Process Design Pattern may have the potential to intuitively support ICT based lean construction. We initiated a 'Process Archeology' in order to reveal the requirements for tools that can support the planning, simulation and control of lean construction methods. First findings show that existing tools provide only limited support and therefore, we started to develop new methodologies and technologies to overcome these shortcomings. Through the introduction of Process Design Patterns, we intent to establish process thinking in the interdisciplinary POP design. Optimized construction processes may be synthesized with semi-automatic methods by applying Process Design Patterns on building structures. By providing process templates that integrate problem solution and expert knowledge, Process Design Patterns may have the potential to ensure high quality process models.
基金This study was supported by the Key Research Projects in Colleges and Universities(15A560021)Key Research Projects of Henan Science and Technology Department(182107000007).
文摘The integration of building information modeling(BIM)and lean construction(LC)provides a solution for the management of megaprojects.Previous studies have generally focused on the theoretical or empirical adoption of BIM and LC.Moreover,only a few studies have examined the approach of simultaneously using BIM and LC in megaprojects.Therefore,an intensive study on the application of BIM and LC in megaprojects,particularly to explore considerably effective integrated application modes of BIM and LC in megaprojects,will substantially promote the management efficiency of megaprojects.The current study describes a method that integrates owner-dominated BIM and LC that was developed in a case study.The proposed method provides a framework for all stakeholders to use BIM and LC in a megaproject dominated by the owner.The interactional relations among the owner,BIM,and LC were analyzed and positive interactions were identified.These positive interactions served as a basis for the implementation of this integrated approach in a case study and could be applied to other megaprojects.The megaproject(i.e.,airport construction project)was examined to verify the performance of the developed method.Results showed that the integration of BIM and LC dominated by the owner can improve management performance and achieve high quality standard.
文摘Performance measurement(PM)generates useful data for process control,facilitates communication between different sectors,and helps to align efforts on the most important aspects of the business.Thus,PM plays a key role in the management of projects and organizations.PM is also important in the implementation of lean production principles and methods,such as reducing the share of nonvalue-adding activities,increasing process transparency,building continuous improvement into the process,and benchmarking.Moreover,the adoption of the lean production philosophy requires changes in PM.Despite its importance,limited studies have been conducted on the use of PM systems for assessing the impact of lean production programs in construction projects.In addition,studies on how lean companies(or projects)use performance measurement and to what extent the indicators adopted reflect the result of actions that have been undertaken are limited.This study proposes a set of requirements in PM systems of construction projects from the perspective of lean production and a taxonomy of performance metrics for lean production systems.Five empirical studies have been carried out on construction companies from South America involved in the implementation of lean production systems.The scope of this investigation is limited to the construction projects as production systems rather than PM at the level of construction organizations.
文摘The construction industry is facing a gradual but important transformation toward more productivity and collaboration.In this framework,two major approaches are often cited in the literature as having the potential to improve the practices in the industry:Building Information Modeling(BIM)and Lean Construction.Several scientific studies have demonstrated the synergy of these two approaches and very recent research has reported positive results from the use of software applications as support for their implementation on construction sites.However,the stakes of such integration have been very little studied.This article presents the results of a research project conducted within a general contractor firm that decided to implement BIM and Last Planner System(LPS)on its construction sites.The research uses a four-stage action research approach,including the characterization of the research issue,the establishment of an action plan,its implementation and its evaluation.Compared to recent related studies,the research is less enthusiastic.While it highlights the need for new tools to improve production planning and control,it also points to a strong resistance to change by practitioners at the site.They emphasize the necessity for adequate pre-service training and the need for new resources that can work flill-time on the ongoing training of site teams.In addition,some limitations of the tool lead workers to believe that it can quickly become a factor that slows down their daily work rather than improving it.Based on the advice of professionals,the paper formulates some recommendations to the industry,the researchers and the software developers.
文摘While logistics comprises an important part of tunneling costs,it is generally not considered a lever of performance but rather a con-straint to a project’s progress.This study presents some insights on how smart technology can impact the tunneling industry.The impact is even greater because of the complexity of the tunneling supply chain,and smart technology could help support this process.Finally,we discuss how the nature of the tunneling industry invites stakeholders to develop a common understanding of the project prior to con-struction to successfully deploy smart technology during the use or maintenance phase.
文摘This study provides a critical review of the concepts of Agile,Lean,Scrum,and Last Planner®System(LPS).A comparative analysis is conducted between LPS and Scrum to expand LPS by considering Scrum’s best practices.Eight dimensions,namely,1)origins,2)main purpose,3)overall system/framework process,4)tools or artifacts maintained by the team,5)team composition and main roles,6)regular events or team meetings,7)metrics/dashboards,and 8)approach to learning,are evaluated.After analyzing side by side the eight dimensions,it was found that many aspects from Scrum already exist in LPS in the same or similar form.However,the authors identify four main elements from Scrum that can be leveraged to improve the LPS benchmark,such as considering the Scrum“Increment”concept into LPS,having a clear definition of roles and responsibilities,or adding an equivalent to a Scrum Master to have a designated"rule keeper”in LPS.These opportunities to be considered in new LPS benchmarks need to be tested and validated with real applications.To the best of the authors5 knowledge,this work is the first to comprehensively compare Scrum(Agile)and LPS(Lean)and could be seen as a contribution toward the evolution of the Last Planner System for the academic and industrial environments.