Accelerating Oxygen Electrocatalysis Kinetics on Metal-Organic Frameworks via Bond Length Optimization

Metal-organic frameworks(MOFs)have been developed as an ideal platform for exploration of the relationship between intrinsic structure and catalytic activity,but the limited catalytic activity and stability has hampered their practical use in water splitting.Herein,we develop a bond length adjustment strategy for optimizing naphthalene-based MOFs that synthesized by acid etching Co-naphthalenedicarboxylic acid-based MOFs(donated as AE-CoNDA)to serve as efficient catalyst for water splitting.AE-CoNDA exhibits a low overpotential of 260 mV to reach 10 mA cm^(−2)and a small Tafel slope of 62 mV dec^(−1)with excellent stability over 100 h.After integrated AE-CoNDA onto BiVO_(4),photocurrent density of 4.3 mA cm^(−2)is achieved at 1.23 V.Experimental investigations demonstrate that the stretched Co-O bond length was found to optimize the orbitals hybridization of Co 3d and O 2p,which accounts for the fast kinetics and high activity.Theoretical calculations reveal that the stretched Co-O bond length strengthens the adsorption of oxygen-contained intermediates at the Co active sites for highly efficient water splitting.

Chord length sampling correction analysis for dispersion fuel in Monte Carlo simulation

Dispersion fuels,knowned for their excellent safety performance,are widely used in advanced reactors,such as hightemperature gas-cooled reactors.Compared with deterministic methods,the Monte Carlo method has more advantages in the geometric modeling of stochastic media.The explicit modeling method has high computational accuracy and high computational cost.The chord length sampling(CLS)method can improve computational efficiency by sampling the chord length during neutron transport using the matrix chord length?s probability density function.This study shows that the excluded-volume effect in realistic stochastic media can introduce certain deviations into the CLS.A chord length correction approach is proposed to obtain the chord length correction factor by developing the Particle code based on equivalent transmission probability.Through numerical analysis against reference solutions from explicit modeling in the RMC code,it was demonstrated that CLS with the proposed correction method provides good accuracy for addressing the excludedvolume effect in realistic infinite stochastic media.

Effects of different orthokeratology lens designs on slowing axial length elongation in children with myopia

AIM:To elucidate whether differences exist in the impact on retarding the elongation of axial length(AL)among children with myopia when utilizing orthokeratology(ortho-k)lenses employing the corneal refractive therapy(CRT)design versus those employing the vision shaping treatment(VST)design.METHODS:This retrospective clinical trial aimed to collect and analyze AL data from individuals who wore ortho-k lenses for three years.A total of 654 subjects were enrolled and prescribed one of the three specific brands of ortho-k lenses:CRT,Euclid,and Mouldway.The study’s primary focus was to compare the rates of AL elongation and myopic progression across these three brands of ortho-k lenses.RESULTS:In the 3-year follow-up,the AL elongation exhibited variations of 0.73±0.36 mm in the CRT lens group,0.59±0.37 mm in the Euclid lens group,and 0.63±0.38 mm in the Mouldway lens group.A noteworthy disparity emerged between the CRT and Mouldway groups(P<0.01),as well as between the CRT and Euclid groups(P<0.001).Additionally,it was observed that 32.1%of participants who wore CRT lenses experienced a decelerated progression of myopia,in contrast to 47.2%in the Euclid group and 44.4%in the Mouldway group.Statistical analyses revealed a statistically significant distinction between the CRT and Euclid groups(P<0.01),and similarly,the CRT group demonstrated a statistically significant difference when compared to the Mouldway group(P<0.05).CONCLUSION:Ortho-k lenses represent a pragmatic strategy for mitigating the advancement of myopia.In contradistinction to ortho-k lenses utilizing the CRT design,those employing the VST design exhibited a more favorable impact regarding retarding AL elongation.

Phenotypic Characterization and QTL/Gene Identification for Internode Number and Length Related Traits in Maize

Internode number and length are the foundation to constitute plant height, ear height and the above-ground spatial structure of maize plant. In this study, segregating populations were constructed between EHel with extremely low ear height and B73. Through the SNP-based genotyping and phenotypic characterization, 13 QTL distributed on the chromosomes (Chrs) of Chr1, Chr2, Chr5-Chr8 were detected for four traits of internode no. above ear (INa), average internode length above ear (ILaa), internode no. below ear (INb), and average internode length below ear (ILab). Phenotypic variation explained (PVE) by a single QTL ranged from 6.82% (qILab2-2) to 12.99% (qILaa5). Zm00001d016823 within the physical region of qILaa5, the major QTL for ILaa with the largest PVE was determined as the candidate through the genomic annotation and sequence alignment between EHel and B73. Product of Zm00001d016823 was annotated as a WEB family protein homogenous to At1g75720. qRT-PCR assay showed that Zm00001d016823 highly expressed within the tissue of internode, exhibiting statistically higher expression levels among internodes of IN4 to IN7 in EHel than those in B73 (P Zm00001d016823 might provide novel insight into molecular mechanism beyond phytohormones controlling internode development in maize.

Evaluation of the slipstream in different regions around a train with respect to different nose lengths:A comparison study

In this work,the flow surrounding the train was obtained using a detached eddy simulation(DES)for slipstream analysis.Two different streamlined nose lengths were investigated:a short nose(4 m)and a long nose(9 m).The time-average slipstream velocity and the time-average slipstream pressure along the car bodies were compared and explained in detail.In addition to the time-averaged values,the _(max)imum velocities and the pressure peak-to-peak values around the two trains were analyzed.The result showed that the nose length affected the slipstream velocity along the entire train length at the lower and upper regions of the side of the train.However,no significant effect was recognized at the middle height of the train along its length,except in the nose region.Moreover,within the train’s side regions(y=2.0-2.5 m and z=2-4 m)and(y=2.5-3.5 m and z=0.2-0.7 m),the ratio of slipstream velocity U_(max) between the short and long nose trains was notably higher.This occurrence also manifested at the train’s upper section,specifically where y=0-2.5 m and z=4.2-5.0 m.Similarly,regarding the ratio of _(max)imum pressure peak-to-peak values Cp-p_(max),significant regions were observed at the train’s side(y=1.8-2.6 m and z=1-4 m)and above the train(y=0-2 m and z=3.9-4.8 m).

Aerodynamic Features of High-Speed Maglev Trains with Different Marshaling Lengths Running on a Viaduct under Crosswinds

The safety and stability of high-speed maglev trains traveling on viaducts in crosswinds critically depend on their aerodynamic characteristics.Therefore,this paper uses an improved delayed detached eddy simulation(IDDES)method to investigate the aerodynamic features of high-speed maglev trains with different marshaling lengths under crosswinds.The effects of marshaling lengths(varying from 3-car to 8-car groups)on the train’s aerodynamic performance,surface pressure,and the flow field surrounding the train were investigated using the three-dimensional unsteady compressible Navier-Stokes(N-S)equations.The results showed that the marshaling lengths had minimal influence on the aerodynamic performance of the head and middle cars.Conversely,the marshaling lengths are negatively correlated with the time-average side force coefficient(CS)and time-average lift force coefficient(Cl)of the tail car.Compared to the tail car of the 3-car groups,the CS and Cl fell by 27.77%and 18.29%,respectively,for the tail car of the 8-car groups.It is essential to pay more attention to the operational safety of the head car,as it exhibits the highest time average CS.Additionally,the mean pressure difference between the two sides of the tail car body increased with the marshaling lengths,and the side force direction on the tail car was opposite to that of the head and middle cars.Furthermore,the turbulent kinetic energy of the wake structure on the windward side quickly decreased as marshaling lengths increased.

Impact of multifocal gas-permeable lens designs on short-term choroidal response, axial length, and retinal defocus profile

AIM:To investigate the impact of multifocal gas permeable contact lens(MFGPCL)in various add power and distance/near area allocation on short-term changes of choroidal thickness(ChT),axial length(AL),and retinal defocus profile in young adults.METHODS:Seventeen young adults(2 males and 15 females;age 23.17±4.48y)were randomly assigned to wear two designs binocularly with a one-week washout period in between.Total of four MFGPCL designs were assessed.All designs were distance-center that varied in two add power(+1.50 and 3.00 D)and/or two distance zone(DZ)diameters(1.50 and 3.00 mm;design A:DZ 1.5/add 3.0,B:DZ 1.5/add 1.5,C:DZ 3.0/add 3.0,D:DZ 3.0/add 1.5).ChT,AL,and peripheral refraction data were collected on each subject at baseline,on days 1 and 7 of MFGPCL daily wear.ChT was assessed in four quadrants using a spectraldomain optical coherence tomography.RESULTS:AL was shortened by-26±44μm with lens C,-18±27μm with lens D,-13±29μm with lens A,and-8±30μm with lens B(all P<0.05).A significant overall increase in ChT was observed with all 4 designs(lens A:+6±6μm,B:+3±7μm,C:+8±7μm,and D:+8±7μm).Temporal and superior choroid exhibited more choroidal thickening associated with MFGPCL.All designs induced significant relative peripheral myopia(RPM)beyond the central 20o across the horizontal meridian in both nasal and temporal fields(P<0.05).CONCLUSION:MFGPCLs show a significant influence on ChT and AL,which are associated with significant increase in RPM after short-term wear.The reliability and feasibility of quantifying short-term changes in ChT support its use as a promising marker for the long-term efficacy of myopia-controlling treatments.

Revisiting the Electron Radius in Light of Length Contraction

In previous work, the electron radius was identified as the “actual electron radius.” However, this is more accurately described as the electron radius at rest. This study reexamines the electron with an emphasis on the electron radius under motion, incorporating the effects of length contraction. The findings suggest that the radius is subject to Lorentz contraction, which has interesting implications for relativistic effects at the subatomic level.

Exploring the Implications of the Deformation Parameter and Minimal Length in the Generalized Uncertainty Principle

The breakdown of the Heisenberg Uncertainty Principle occurs when energies approach the Planck scale, and the corresponding Schwarzschild radius becomes similar to the Compton wavelength. Both of these quantities are approximately equal to the Planck length. In this context, we have introduced a model that utilizes a combination of Schwarzschild’s radius and Compton length to quantify the gravitational length of an object. This model has provided a novel perspective in generalizing the uncertainty principle. Furthermore, it has elucidated the significance of the deforming linear parameter β and its range of variation from unity to its maximum value.

Fine mapping and characterization of a major QTL for grain length,QGl.cau-2D.1,that has pleiotropic effects in synthetic allohexaploid wheat

Grain size is one of the determinants of grain yield,and identifying the genetic loci that control grain size will be helpful for increasing grain yield.In our previous study,a quantitative trait locus(QTL)for grain length(GL),QGl.cau-2D.1,was identified from an F2 population developed from the cross between the natural(TAA10)and synthetic(XX329)allohexaploid wheat.In the present study,we mainly fine mapped and validated its genetic effects.To this end,multiple near-isogenic lines(NILs)were obtained through marker-assisted selection with TAA10 as the recurrent parent.The secondary populations derived from 25 heterozygous recombinants were used for fine mapping of QGl.cau-2D.1,and the allele from XX329 significantly increased GL,thousand-grain weight(TGW),total spikelet number per spike(TSN)and spike compactness(SC).Using NILs for XX329(2D+)and TAA10(2D−),we determined the genetic and pleiotropic effects of QGl.cau-2D.1.The target sequences were aligned with the wheat reference genome RefSeq v2.1 and spanned an~0.9 Mb genomic region.TraesCS2D03G0114900(ortholog of Os03g0594700)was predicted as the candidate gene based on whole-genome re-sequencing and expression analyses.In summary,the map-based cloning of QGl.cau-2D.1 will be useful for improving grain weight with enhanced GL and TSN.

Interrelationships between Length of the Day, Moon Distance, Phanerozoic Geodynamic Cycles, Tidal Dissipation and Earth’s Core: Review and Analysis

The rotation of the Earth and the related length of the day (LOD) are predominantly affected by tidal dissipation through the Moon and the growth of the Earth’s core. Due to the increased concentration of mass around the rotation axis of the spinning Earth during the growth of the core the rotation should have been accelerated. Controversially the tidal dissipation by the Moon, which is mainly dependent on the availability of open shallow seas and the kind of Moon escape from a nearby position, acts towards a deceleration of the rotating Earth. Measurements of LOD for Phanerozoic and Precambrian times open ways to solve questions concerning the geodynamical history of the Earth. These measurements encompass investigations of growth patterns in fossils and depositional patterns in sediments (Cyclostratigraphy, Tidalites, Stromatolites, Rhythmites). These patterns contain information on the LOD and on the changing distance between Earth and Moon and can be used as well for a discussion about the growth of the Earth’s core. By updating an older paper with its simple approach as well as incorporating newly published results provided by the geoscientific community, a moderate to fast growth of the core in a hot early Earth will be favored controversially to the assumption of a delayed development of the core in an originally cold Earth. Core development with acceleration of Earth’s rotation and the contemporaneous slowing down due to tidal dissipation during the filling of the ocean may significantly interrelate.

Simple bone cysts of the proximal humerus presented with limb length discrepancy:A case report

BACKGROUND Simple bone cysts(SBC)are benign tumor-like bone lesions typically identified in children.While SBC may lead to growth disturbances or growth arrest,such cases are uncommon.The mechanisms behind these observations remain unclear.Additionally,research on the etiology of SBC remains inconclusive,and there has been no consensus on the appropriate timing and methodology for treatment.CASE SUMMARY Here,we present our experience in the successful surgical management of a 10-year-old girl with SBC,who presented with a pathological fracture complicated by malunion of the displaced fracture,varus deformity,and limb length discrepancy.We hypothesized two possible etiologies for the patient’s growth arrest and subsequent humerus varus deformity:(1)Direct disruption of the physis by fluid from the cyst itself;and(2)damage to the epiphysis due to repetitive pathological fractures associated with SBC.In addressing this case,surgical intervention was undertaken to correct the proximal humerus varus deformity.This approach offered the advantages of simultaneously correcting angular abnormalities,achieving mild limb lengthening,providing definitive SBC treatment,and reducing the overall treatment duration.CONCLUSION As per current literature,acute correction of acute angular deformity in proximal humeral SBC is not well comprehended.However,in this specific case,acute correction was considered an optimal solution.

Frame Length Dependency for Fundamental Frequency Extraction in Noisy Speech

The fundamental frequency plays a significant part in understanding and perceiving the pitch of a sound. The pitch is a fundamental attribute employed in numerous speech-related works. For fundamental frequency extraction, several algorithms have been developed which one to use relies on the signal’s characteristics and the surrounding noise. Thus, the algorithm’s noise resistance becomes more critical than ever for precise fundamental frequency estimation. Nonetheless, numerous state-of-the-art algorithms face struggles in achieving satisfying outcomes when confronted with speech recordings that are noisy with low signal-to-noise ratio (SNR) values. Also, most of the recent techniques utilize different frame lengths for pitch extraction. From this point of view, This research considers different frame lengths on male and female speech signals for fundamental frequency extraction. Also, analyze the frame length dependency on the speech signal analytically to understand which frame length is more suitable and effective for male and female speech signals specifically. For the validation of our idea, we have utilized the conventional autocorrelation function (ACF), and state-of-the-art method BaNa. This study puts out a potent idea that will work better for speech processing applications in noisy speech. From experimental results, the proposed idea represents which frame length is more appropriate for male and female speech signals in noisy environments.

Reducing Extended Hospital Lengths of Stay

In the United States, the costs of health care have become a major burden for the health care system. In order to address this problem, the hospitals of Syracuse, New York, developed programs to provide subacute and complex care. The Subacute programs provided patient transportation services for dialysis and other types of care outside hospitals. They also developed programs for services such as intravenous therapy in nursing homes. The Complex Care Programs, such as intravenous therapy and mental health services, have provided alternatives to extended care in hospitals. During the past five years, utilization of these programs has varied, declining between 2019 and 2022, and then increasing between 2022 and 2024. The programs have avoided the need for 1530 - 2974 patient days in hospitals. The programs saved the Syracuse hospitals approximately $600 per inpatient day. This amounted to savings of $918,000 - $1,784,400 per year. These programs demonstrated how relatively small mechanisms can save large amounts of health care resources.

Production Chain Length and PPI-CPI Divergence:Analysis Based on the Global Input-output Price Model

Productivity and international energy price shocks are reflected in PPI and CPI via industrial chains.China’s in-depth participation into the global value chains has increasingly lengthened its industrial production chains.The question is how the changing length of production chains will affect CPI and PPI,as well as CPI-PPI correlation?By constructing a global input-output price model,this paper offers a theoretical discussion on the impact of production chain length on the CPI-PPI divergence.Our findings suggest that the price shock of international bulk commodities has a greater impact on China’s PPI than that on CPI.The effects on both China’s PPI and CPI estimated by using the single-country input-output model are higher than the results estimated with the global input-output model.However,the difference between CPI and PPI variations estimated with the global input-output model is greater than the result estimated with the single-country input-output model,which supports the view that the lengthening of production chains,especially international production chains,leads to a divergence between CPI and PPI.Empirical results based on cross-national panel data also suggest that the lengthening of production chains has reduced the CPI-PPI correlation for countries,i.e.the lengthening of production chains has increased the PPI-CPI divergence.That is to say,policymakers should target not just CPI in maintaining price stability,but instead focus on the stability of both PPI and CPI.Efforts can be made to proactively adjust the price index system,and formulate the industrial chain price index.

Nonlinear Relationship and Its Evolutionary Trace between Node Degree and Average Path Length of China Aviation Network Based on Complex Network

In order to reveal the complex network characteristics and evolution principle of China aviation network,the relationship between the node degree and the average path length of China aviation network in 1988,1994,2001,2008 and 2015 was studied.According to the theory and method of complex network,the network system was constructed with the city where the airport was located as the network node and the airline as the edge of the network.On the basis of the statistical data,the node average path length of China aviation network in 1988,1994,2001,2008 and 2015 was calculated.Through regression analysis,it was found that the node degree had a logarithmic relationship with the average length of node path,and the two parameters of the logarithmic relationship had linear evolutionary trace.Key word:China aviation network,complex network,node degree,average length of node path,logarithmic relationship,evolutionary trace.

Nonlinear Relationship and Its Evolutionary Trace between Average Degree and Average Path Length of Edge Vertices of China Aviation Network Based on Complex Network

In order to reveal the complex network characteristics and evolution principle of China aviation network,the relationship between the average degree and the average path length of edge vertices of China aviation network in 1988,1994,2001,2008 and 2015 was studied.According to the theory and method of complex network,the network system was constructed with the city where the airport was located as the network node and the airline as the edge of the network.On the basis of the statistical data,the average degree and average path length of edge vertices of China aviation network in 1988,1994,2001,2008 and 2015 were calculated.Through regression analysis,it was found that the average degree had a logarithmic relationship with the average path length of edge vertices and the two parameters of the logarithmic relationship had linear evolutionary trace.

Fine mapping and candidate gene analysis of qGL10 affecting rice grain length

Grain size influences the yield and quality of rice(Oryza sativa L.),and grain length is one of the component traits of grain size.In this study,a near-isogenic line LB3 with long grain size was constructed using japonica rice cultivar 02428,with short grain size,as the recipient parent and indica rice cultivar ZYX,with long grain size,as the donor parent,by multi-generation backcrossing and selfing.BSA-seq was used for preliminary QTL mapping and InDel markers were developed to fine map the locus.The major QTL,tentatively named qGL10,for grain length was located in a 128.45 kb region of chromosome 10.Combined with haplotype analysis of rice varieties,expression pattern analysis of candidate genes suggested LOC_Os10g39130(OsMADS56)as a candidate gene.Sequence alignment of OsMADS56 in 02428 and LB3 revealed that there were 15 SNPs in the promoter region and four in the coding region.Further haplotype analysis suggested that SNP9(G/A)located in the TGTCACA motif might account for the different expression levels of OsMADS56 in 02428 and LB3.These results lay a foundation for the application of qGL10 in molecular breeding of new rice varieties.

Temperature dependence of the photothermal laser cooling efficiency for a micro-cantilever

The relationship between the photothermal cooling efficiency of a micro-cantilever＇s mechanical mode and the en- vironmental temperature is studied. The micro-cantilever and a polished fiber end form a low finesse Fabry-Perot （FP） cavity. Experimental results in a temperature range from 77 K to 298 K show that temperature has an obvious influence on photothermal cooling efficiency. The photothermal cooling efficiency, ηph, at 100 K is 10 times that at 298 K. This accords well with the theoretical analysis that the high photothermal cooling efficiency can be achieved when photothermal response time, τph, and mechanical resonant frequency, ω0, are close to the optimal photothermal cooling condition ω0τph = 1. Our study provides an important approach for high effective photothermal cooling and high-sensitivity measurement for force microscopy.

The impact of emergency department length of stay on the outcomes of trauma patients requiring hospitalization: a retrospective observational study

BACKGROUND: We aimed to explore the impact of the emergency department length of stay(EDLOS) on the outcome of trauma patients.METHODS: A retrospective study was conducted on all trauma patients requiring hospitalization between 2015 and 2019. Patients were categorized into 4 groups based on the EDLOS(<4 h, 4–12 h,12–24 h, and >24 h). Data were analyzed using Chi-square test(categorical variables), Student’s t-test(continuous variables), correlation coefficient, analysis of variance and multivariate logistic regression analysis for identifying predictors of short EDLOS and hospital mortality.RESULTS: The study involved 7,026 patients with a mean age of 32.1±15.6 years. Onefifth of patients had a short EDLOS(<4 h) and had higher level trauma team T1 activation(TTA-1), higher Injury Severity Score(ISS), higher shock index(SI), and more head injuries than the other groups(P=0.001). Patients with an EDLOS >24 h were older(P=0.001) and had more comorbidities(P=0.001) and fewer deaths(P=0.001). Multivariate regression analysis showed that the predictors of short EDLOS were female gender, GCS, SI, hemoglobin level, ISS, and blood transfusion. The predictors of mortality were TTA-1(odds ratio [OR]=4.081, 95%CI: 2.364–7.045), head injury(OR=3.920, 95%CI: 2.413–6.368), blood transfusion(OR=2.773, 95%CI: 1.668–4.609), SI(OR=2.132, 95%CI: 1.364–3.332), ISS(OR=1.077, 95%CI: 1.057–1.096), and age(OR=1.040, 95%CI: 1.026–1.054). CONCLUSIONS: Patients with shorter EDLOS had different baseline characteristics and hospital outcomes compared with patients with longer EDLOS. Patients with prolonged EDLOS had better outcomes;however, the burden of prolonged boarding in the ED needs further elaboration.