Four kinds of Au nanorods（NRs）with different aspect ratios are designed to adjust the relationship between resonance energy level of longitudinal（L）and transverse（T）modes.During the femto-second Z-scan experimen...Four kinds of Au nanorods（NRs）with different aspect ratios are designed to adjust the relationship between resonance energy level of longitudinal（L）and transverse（T）modes.During the femto-second Z-scan experiments,huge saturable absorption phenomena are observed while the energy level T is located between one to two times of the energylevel L.This means that the energy may transfer between longitudinal and transverse energylevels in the same and/or different Au NRs.It effectively depresses the production of revised saturated absorption and increases the saturable absorption efficiency.This method is significant for the preparation of high-efficiency saturable absorption devices.展开更多
It is important to select suitable parameters of a submerged entry nozzle （SEN） for optimizing the flow and temperature patterns in a mold. The effect of SEN design on the mould level stability, meniscus steel flow ...It is important to select suitable parameters of a submerged entry nozzle （SEN） for optimizing the flow and temperature patterns in a mold. The effect of SEN design on the mould level stability, meniscus steel flow velocity, and heat transfer of the mold of a medium thin slab caster was studied by means of 1：1 water modeling and industrial testing. The advantages of a 2-port SEN compared with a 3-port SEN are the following： more optimal flow patterns with a lower mold level fluctuation and a lower meniscus steel flow velocity; proper powder consumption without slag bears due to a reasonable liquid powder thickness. The argon flow rate can be reduced and the mold average heat flux and temperature near the edges of the copper plate are reduced. At a casting speed of 2.5 m·min^-1, the mold level fluctuation lies within ＋5 mm. In addition, soft cooling of the steel shell in the mold is realized, which is suitable for casting crack susceptible steel grades.展开更多
The four-level model of laser-induced collisional energy transfer （LICET） for the ion-ion collision system is established based on the time-dependent SchrSdinger equation for the electron dynamics, through which the...The four-level model of laser-induced collisional energy transfer （LICET） for the ion-ion collision system is established based on the time-dependent SchrSdinger equation for the electron dynamics, through which the equations of motion of the probability amplitudes and cross section of the collision system are obtained. Numerical calculations are performed for the Ca＋ Sr＋ system, with the results showing that the peak of the LICET spectrum appears at a resonant frequency of the transfer laser. The magnitude of the obtained collision cross section is in the order of 10-16 cm2, and is comparable to that obtained in atomic systems, which indicates the validity of the established four-level model.展开更多
The effect of delay time on photoelectron spectra and state populations of a four-level ladder K2 molecule is investigated by a pump1–pump2–probe pulse via the time-dependent wave packet approach. The periodical mot...The effect of delay time on photoelectron spectra and state populations of a four-level ladder K2 molecule is investigated by a pump1–pump2–probe pulse via the time-dependent wave packet approach. The periodical motion of the wave packet leads to the periodical change of the photoelectron spectra. The Autler–Townes triple splitting appears at zero delay time, double splitting appears at nonzero delay time between pump1 and pump2 pulses, and no splitting appears at nonzero delay time between pump2 and probe pulses. The periodical change of the state populations with the delay time may be due to the coupling effect between the two pulses. It is found that the selectivity of the state populations may be attained by regulating the delay time. The results can provide an important basis for realizing the optical control of molecules experimentally.展开更多
Register transfer level mapping (RTLM) algorithm for technology mapping at RT level is presented,which supports current design methodologies using high level design and design reuse.The mapping rules implement a sou...Register transfer level mapping (RTLM) algorithm for technology mapping at RT level is presented,which supports current design methodologies using high level design and design reuse.The mapping rules implement a source ALU using target ALU.The source ALUs and the target ALUs are all represented by the general ALUs and the mapping rules are applied in the algorithm.The mapping rules are described in a table fashion.The graph clustering algorithm is a branch and bound algorithm based on the graph formulation of the mapping algorithm.The mapping algorithm suits well mapping of regularly structured data path.Comparisons are made between the experimental results generated by 1 greedy algorithm and graphclustering algorithm,showing the feasibility of presented algorithm.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 11404410 and 11504105the Hunan Provincial Natural Science Foundation under Grant No 2016JJ3140
文摘Four kinds of Au nanorods（NRs）with different aspect ratios are designed to adjust the relationship between resonance energy level of longitudinal（L）and transverse（T）modes.During the femto-second Z-scan experiments,huge saturable absorption phenomena are observed while the energy level T is located between one to two times of the energylevel L.This means that the energy may transfer between longitudinal and transverse energylevels in the same and/or different Au NRs.It effectively depresses the production of revised saturated absorption and increases the saturable absorption efficiency.This method is significant for the preparation of high-efficiency saturable absorption devices.
文摘It is important to select suitable parameters of a submerged entry nozzle （SEN） for optimizing the flow and temperature patterns in a mold. The effect of SEN design on the mould level stability, meniscus steel flow velocity, and heat transfer of the mold of a medium thin slab caster was studied by means of 1：1 water modeling and industrial testing. The advantages of a 2-port SEN compared with a 3-port SEN are the following： more optimal flow patterns with a lower mold level fluctuation and a lower meniscus steel flow velocity; proper powder consumption without slag bears due to a reasonable liquid powder thickness. The argon flow rate can be reduced and the mold average heat flux and temperature near the edges of the copper plate are reduced. At a casting speed of 2.5 m·min^-1, the mold level fluctuation lies within ＋5 mm. In addition, soft cooling of the steel shell in the mold is realized, which is suitable for casting crack susceptible steel grades.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10674036 and 10774033)Program of Excellent Team in Harbin Institute of Technology,China
文摘The four-level model of laser-induced collisional energy transfer （LICET） for the ion-ion collision system is established based on the time-dependent SchrSdinger equation for the electron dynamics, through which the equations of motion of the probability amplitudes and cross section of the collision system are obtained. Numerical calculations are performed for the Ca＋ Sr＋ system, with the results showing that the peak of the LICET spectrum appears at a resonant frequency of the transfer laser. The magnitude of the obtained collision cross section is in the order of 10-16 cm2, and is comparable to that obtained in atomic systems, which indicates the validity of the established four-level model.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11704178 and 11764041)the Scientific Research Fund of Hunan Provincial Education Department,China(Grant No.15B204)
文摘The effect of delay time on photoelectron spectra and state populations of a four-level ladder K2 molecule is investigated by a pump1–pump2–probe pulse via the time-dependent wave packet approach. The periodical motion of the wave packet leads to the periodical change of the photoelectron spectra. The Autler–Townes triple splitting appears at zero delay time, double splitting appears at nonzero delay time between pump1 and pump2 pulses, and no splitting appears at nonzero delay time between pump2 and probe pulses. The periodical change of the state populations with the delay time may be due to the coupling effect between the two pulses. It is found that the selectivity of the state populations may be attained by regulating the delay time. The results can provide an important basis for realizing the optical control of molecules experimentally.
文摘Register transfer level mapping (RTLM) algorithm for technology mapping at RT level is presented,which supports current design methodologies using high level design and design reuse.The mapping rules implement a source ALU using target ALU.The source ALUs and the target ALUs are all represented by the general ALUs and the mapping rules are applied in the algorithm.The mapping rules are described in a table fashion.The graph clustering algorithm is a branch and bound algorithm based on the graph formulation of the mapping algorithm.The mapping algorithm suits well mapping of regularly structured data path.Comparisons are made between the experimental results generated by 1 greedy algorithm and graphclustering algorithm,showing the feasibility of presented algorithm.
