The light output functions for protons of ST-401 and BC-408 plastic scintillators were measured using white neutron source produced by the 9Be（d,n） 10B reaction at the HI-13 Tandem Accelerator at China Institute of ...The light output functions for protons of ST-401 and BC-408 plastic scintillators were measured using white neutron source produced by the 9Be（d,n） 10B reaction at the HI-13 Tandem Accelerator at China Institute of Atomic Energy（CIAE）.The LOFs of plastic scintillators for protons in the energy range of 0.5-16.5 MeV were obtained by the time-of-flight（TOF） technique and an iterative procedure.Two parameters（kB and C） were deduced by fitting the experimental data.展开更多
In order to promote the light output powers of GaN-based light emitting diodes (LEDs), two kinds of novel corrosive liquidshave been developed in this paper to roughen the surface of the indium tin oxide (ITO) current...In order to promote the light output powers of GaN-based light emitting diodes (LEDs), two kinds of novel corrosive liquidshave been developed in this paper to roughen the surface of the indium tin oxide (ITO) current spreading layer of LEDs. As aresult, the textured transparent ITO layer greatly enhanced the external quantum efficiency of the LEDs. Provided that a wafersample was dipped in a kind of corrosive liquid developed by us for only about 60 s, the light output powers of the LEDs canbe promoted by 24.7%, compared with conventional GaN-based LEDs. It is obvious that the presented method is simple, rapidand cost-effective.展开更多
As the quality of power LED improves and the cost of power LED reduces, semiconductor lighting will replace incandescent and fluorescent lighting gradually, causing another revolution on the lighting history. And its ...As the quality of power LED improves and the cost of power LED reduces, semiconductor lighting will replace incandescent and fluorescent lighting gradually, causing another revolution on the lighting history. And its driving solution has been greatly accelerated. Based on the white power LED I-V characteristics and the application ambiance, proposed is a new LED lighting solution, suiting indoor and outdoor illumination. According to the test results, the design is optimized, and the electrical efficiency is 95% and the output current deviation is 13.0%.展开更多
In this study,we constructed two annular detector arrays comprising 24 wedge-shaped CsI(Tl) crystals,and tested them using anαsource and radioactive beams of ^(14-16) Con a CD_2 target.We compared the properties of a...In this study,we constructed two annular detector arrays comprising 24 wedge-shaped CsI(Tl) crystals,and tested them using anαsource and radioactive beams of ^(14-16) Con a CD_2 target.We compared the properties of a CsI(Tl) crystal encapsulated with various reflectors,revealing that using the 80-μm-thick ESR film to pack the CsI(Tl) crystal yielded the largest light output with the smallest non-uniformity in light output (ΔLO).For the 24 CsI(Tl) detectors with the 80-μm-thick ESR films,the average energy resolution improved as the average light output increased;however,it deteriorated as theΔLO value increased.To form two annular Si-CsI(Tl) telescopes for identifying the light-charged particles,theΔLO value and energy resolution of each CsI(Tl) detector were maintained under 20%and 7.7%,respectively.These telescopes were tested for the first time in a direct nuclear reaction experiment using ^(14-16) C+d.The results demonstrated that the Z=1 and Z=2 charged particles were adequately discriminated by the telescopes using the standardΔE-E method.展开更多
文摘The light output functions for protons of ST-401 and BC-408 plastic scintillators were measured using white neutron source produced by the 9Be（d,n） 10B reaction at the HI-13 Tandem Accelerator at China Institute of Atomic Energy（CIAE）.The LOFs of plastic scintillators for protons in the energy range of 0.5-16.5 MeV were obtained by the time-of-flight（TOF） technique and an iterative procedure.Two parameters（kB and C） were deduced by fitting the experimental data.
基金supported by the Natural Science Foundation of Guangdong Province, China (Grant Nos. 8251063101000007, 10151063101000009 and 9451063101002082)the Scientific & Technological Plan of Guangdong Province (Grant Nos. 2008B010200004, 2010B010600030 and 2009B011100003)+2 种基金the National Natural Science Foundation of China(Grant Nos. 61078046 and 10904042)the Key Project of Chinese Ministryof Education (Grant No. 210157)the Scientific & Technological Project of Education Department of Hubei Province (Grant No. D20101104)
文摘In order to promote the light output powers of GaN-based light emitting diodes (LEDs), two kinds of novel corrosive liquidshave been developed in this paper to roughen the surface of the indium tin oxide (ITO) current spreading layer of LEDs. As aresult, the textured transparent ITO layer greatly enhanced the external quantum efficiency of the LEDs. Provided that a wafersample was dipped in a kind of corrosive liquid developed by us for only about 60 s, the light output powers of the LEDs canbe promoted by 24.7%, compared with conventional GaN-based LEDs. It is obvious that the presented method is simple, rapidand cost-effective.
文摘As the quality of power LED improves and the cost of power LED reduces, semiconductor lighting will replace incandescent and fluorescent lighting gradually, causing another revolution on the lighting history. And its driving solution has been greatly accelerated. Based on the white power LED I-V characteristics and the application ambiance, proposed is a new LED lighting solution, suiting indoor and outdoor illumination. According to the test results, the design is optimized, and the electrical efficiency is 95% and the output current deviation is 13.0%.
基金supported by the National Natural Science Foundation of China (Nos.12275007, U1867214, 11775004)the funding from the State Key Laboratory of Nuclear Physics and Technology,Peking University,China (No. NPT2021ZZ01)funding from heavy Ion Research Facility,Lanzhou,China (No. HIR2021PY002)。
文摘In this study,we constructed two annular detector arrays comprising 24 wedge-shaped CsI(Tl) crystals,and tested them using anαsource and radioactive beams of ^(14-16) Con a CD_2 target.We compared the properties of a CsI(Tl) crystal encapsulated with various reflectors,revealing that using the 80-μm-thick ESR film to pack the CsI(Tl) crystal yielded the largest light output with the smallest non-uniformity in light output (ΔLO).For the 24 CsI(Tl) detectors with the 80-μm-thick ESR films,the average energy resolution improved as the average light output increased;however,it deteriorated as theΔLO value increased.To form two annular Si-CsI(Tl) telescopes for identifying the light-charged particles,theΔLO value and energy resolution of each CsI(Tl) detector were maintained under 20%and 7.7%,respectively.These telescopes were tested for the first time in a direct nuclear reaction experiment using ^(14-16) C+d.The results demonstrated that the Z=1 and Z=2 charged particles were adequately discriminated by the telescopes using the standardΔE-E method.
