Light-emitting devices based on atomically thin MoSe_(2)

Atomically thin MoSe_(2) layers,as a core member of the transition metal dichalcogenides(TMDs)family,benefit from their appealing properties,including tunable band gaps,high exciton binding energies,and giant oscillator strengths,thus pro-viding an intriguing platform for optoelectronic applications of light-emitting diodes(LEDs),field-effect transistors(FETs),sin-gle-photon emitters(SPEs),and coherent light sources(CLSs).Moreover,these MoSe_(2) layers can realize strong excitonic emis-sion in the near-infrared wavelengths,which can be combined with the silicon-based integration technologies and further encourage the development of the new generation technologies of on-chip optical interconnection,quantum computing,and quantum information processing.Herein,we overview the state-of-the-art applications of light-emitting devices based on two-dimensional MoSe_(2) layers.Firstly,we introduce recent developments in excitonic emission features from atomically thin MoSe_(2) and their dependences on typical physical fields.Next,we focus on the exciton-polaritons and plasmon-exciton polaritons in MoSe_(2) coupled to the diverse forms of optical microcavities.Then,we highlight the promising applications of LEDs,SPEs,and CLSs based on MoSe_(2) and their heterostructures.Finally,we summarize the challenges and opportunities for high-quality emis-sion of MoSe_(2) and high-performance light-emitting devices.

Improving efficiency of organic light-emitting devices by optimizing the LiF interlayer in the hole transport layer

The efficiency of organic light-emitting devices （OLEDs） based on N,N＇-bis（1-naphthyl）-N,N＇-diphenyl-N,1＇- biphenyl-4,4＇-diamine （NPB） （the hole transport layer） and tris（8-hydroxyquinoline） aluminum （Alq3） （both emission and electron transport layers） is improved remarkably by inserting a LiF interlayer into the hole transport layer. This thin LiF interlayer can effectively influence electrical performance and significantly improve the current efficiency of the device. A device with an optimum LiF layer thickness at the optimum position in NPB exhibits a maximum current efficiency of 5.96 cd/A at 215.79 mA/cm2, which is about 86% higher than that of an ordinary device （without a LiF interlayer, 3.2 cd/A）. An explanation can be put forward that LiF in the NPB layer can block holes and balance the recombination of holes and electrons. The results may provide some valuable references for improving OLED current efficiency.

Highly efficient polymer phosphorescent light-emitting devices based on a new polyfluorene derivative as host

Several highly efficient iridium-complex polymer light-emitting devices （PLEDs） are fabricated, with a newly synthesized blue conjugated polymer, poly[（9,9-bis（4-（2-ethylhexyloxy）phenyl）-fluorene）-co-（3,7-dibenziothiene-S,S- dioxide15）] （PPF-3,TSO15）, chosen as host. High luminous efficiencies of 7.4 cd.A-1 and 27.4 cd.A-1 are achieved in red and green PLEDs, respectively, by optimizing the doping concentrations of red phosphorescent dye iridium bis（1- phenylisoquinoline） （acetylacetonate） （Ir（piq）） and green phosphorescent dye iridium tris（2-（4-tolyl）pyridinato-N, C2＇） （Ir（mppy）3）.Furthermore, highly efficient white PLEDs （WPLEDs） with the Commission Internationale de l＇Eclairage （CIE） coordinates of （0.35, 0.38） are successfully produced by carefully controlling the doping concentration of the irid- ium complex. The obtained WPLEDs show maximal efficiencies of 14.4 cd.A-1 and 10.1 lm.W-1, which are comparable to those of incandescent bulbs. Moreover, the electroluminescent spectrum of the white device with an initial luminance of about 1000 cd.m-2 is stable, subject to constant applied current stress, indicating that good device stability can be obtained in this system.

Enhancement of Frster energy transfer from thermally activated delayed fluorophores layer to ultrathin phosphor layer for high color stability in non-doped hybrid white organic light-emitting devices

Fluorescence/phosphorescence hybrid white organic light-emitting devices（WOLEDs） based on double emitting layers（EMLs） with high color stability are fabricated.The simplified EMLs consist of a non-doped blue thermally activated delayed fluorescence（TADF） layer using 9,9-dimethyl-9,10-dihydroacridine-diphenylsulfone（DMAC-DPS） and an ultrathin non-doped yellow phosphorescence layer employing bis[2-（4-tertbutylphenyl）benzothiazolato-N,C2＇]iridium（acetylacetonate）（（tbt）_2Ir（acac））.Two kinds of materials of 4,7-diphenyl-1,10-phenanthroline（Bphen） and 1,3,5-tris（2-Nphenylbenzimidazolyl） benzene（TPBi） are selected as the electron transporting layer（ETL）,and the thickness of yellow EML is adjusted to optimize device performance.The device based on a 0.3-nm-thick yellow EML and Bphen exhibits high color stability with a slight Commission International de l＇Eclairage（CIE） coordinates variation of（0.017,0.009） at a luminance ranging from 52 cd/m^2 to 6998 cd/m^2.The TPBi-based device yields a high efficiency with a maximum external quantum efficiency（EQE）,current efficiency,and power efficiency of 10%,21.1 cd/A,and 21.3 lm/W,respectively.The ultrathin yellow EML suppresses hole trapping and short-radius Dexter energy transfer,so that Forster energy transfer（FRET）from DMAC-DPS to（tbt）_2Ir（acac） is dominant,which is beneficial to keep the color stable.The employment of TPBi with higher triplet excited state effectively alleviates the triplet exciton quenching by ETL to improve device efficiency.

Numerical model of multilayer organic light-emitting devices

A numerical model of multilayer organic light-emitting devices is presented in this article. This model is based on the drift-diffusion equations which include charge injection, transport, space charge effects, trapping, heterojunction interface and recombination process. The device structure in the simulation is ITO/CuPc （20 nm）/NPD （40 nm）/Alq3 （60 nm）/LiF/Al. There are two heterojunctions which should be dealt with in the simulation. The I-V characteristics, carrier distribution and recombination rate of a device are calculated. The simulation results and measured data are in good agreement.

Improving Efficiency by Doping PtOEP into Spiro Light-Emitting Devices

To investigate effective means of improving the efficiency of organic light-emitting devices （OLEDs） by making full use of ,triplet emission, a phosphorescent material Pt （II） Octaethylporphine （PtOEP） is doped into polymer host polyspirobifluorene （Spiro） to allow radiative recombination of triplet excitons. The current and brightness characteristics of the devices are tested and the electroluminescent spectra are described. Both fluorescence and phosphorescence are ob- served,and an obvious increase in external quantum efficiency is realized compared to undoped devices when different phosphorescent dopant concentrations are tried. Thus,the phosphorescent emission from triplet excited states might be an effective way to increase the efficiency of OLEDs when the concentration of the phosphorescent dopant is properiy controlled.

Luminescent Enhancement of Heterostructure Organic Light-Emitting Devices Based on Aluminum Quinolines

High performance organic light-emitting devices （OLEDs） have been investigated by using fluorescent bis （2-methyl-8-quinolinolato）（para-phenylphenolato）aluminum（BAlq） as an emissive layer on the performance of multicolor devices consisting of N, N＇-bis-（1-naphthyl）-N,N＇diphenyl- 1,1＇-biphenyl-4,4＇- diamine （NPB） as hole transport layer. The results show that the performance of heterostructure blue light-emitting device composed of 8-hydroxyquinoline aluminum （Alq3） as an electron transport layer has been dramatically enhanced. In the case of high performance heterostructure devices, the electroluminescent spectra has been perceived to vary strongly with the thickness of the organic layers due to the different recombination region, which indicates that various color devices composed of identical components could be implemented by changing the film thickness of different functional layers.

ZnO-based deep-ultraviolet light-emitting devices

Deep-ultraviolet（DUV） light-emitting devices（LEDs） have a variety of potential applications.Zinc-oxide-based materials,which have wide bandgap and large exciton binding energy,have potential applications in high-performance DUV LEDs.To realize such optoelectronic devices,the modulation of the bandgap is required.This has been demonstrated by the developments of Mg_xZn_（1-x）O and Be_xZn_（1-x）O alloys for the larger bandgap materials.Many efforts have been made to obtain DUV LEDs,and promising successes have been achieved continuously.In this article,we review the recent progress of and problems encountered in the research of ZnO-based DUV LEDs.

Performance and stability-enhanced inorganic perovskite light-emitting devices by employing triton X-100

Significantly enhanced electroluminescence performance and stability of all-inorganic perovskite light-emitting devices(PeLEDs) have been achieved by adding triton X-100 into the perovskite precursors.The small perovskite grains arranged tightly and formed large grains as the triton X-100 were introduced.Thus the nonradiative defects originated from Pb atoms at the grain boundaries were highly passivated by triton X-100 and resulted in the promotion of PeLED performance,including a turn-on voltage of 3.2 V,a brightness of 63500 cd/m^(2),a current efficiency of 17.4 cd/A,and a prolonged lifetime of 2 h in air.

Improvement of electron injection of organic light-emitting devices by inserting a thin aluminum layer into cesium carbonate injection layer

We investigate the electron injection effect of inserting a thin aluminum（Al） layer into cesium carbonate（Cs2CO3）injection layer. Two groups of organic light-emitting devices（OLEDs） are fabricated. For the first group of devices based on Alq3, we insert a thin Al layer of different thickness into Cs2CO3 injection layer, and the device＇s maximum current efficiency of 6.5 cd/A is obtained when the thickness of the thin Al layer is 0.4 nm. However, when the thickness of Al layer is 0.8 nm, the capacity of electron injection is the strongest. To validate the universality of this approach, then we fabricate another group of devices based on another blue emitting material. The maximum current efficiency of the device without and with a thin Al layer is 4.51 cd/A and 4.84 cd/A, respectively. Inserting a thin Al layer of an appropriate thickness into Cs2CO3 layer can result in the reduction of electron injection barrier, enhancement of the electron injection, and improvement of the performance of OLEDs. This can be attributed to the mechanism that thermally evaporated Cs2CO3 decomposes into cesium oxides, the thin Al layer reacts with cesium oxides to form Al–O–Cs complex, and the amount of the Al–O–Cs complex can be controlled by adjusting the thickness of the thin Al layer.

Recombination Efficiency and Width in Bilayer Organic Light-emitting Devices

A bilayer model with ohmic anode contact and injection limited cathode contact has been proposed to calculate the recombination efficiency and recombination zone width of the device. The effects of the thickness of hole transport layer and the barriers of organic/organic interface on the combination efficiency and recombination width have been discussed. It is found that： （1） When the electrons are blocked fully and the holes are not blocked significantly at the organic/organic interface, for a given Lh/L, the recombination efficiency increases with increasing the applied voltage, but at a higher applied voltage, the recombination efficiency decreases with increasing Lh/L; （2） The recombination efficiency increases with increasing applied voltage and Hh＇, and when applied voltage and Hh＇ exceed some value, the recombination efficiency appears as a plateau; （3） The recombination width decreases with increasing the applied voltage and Lh/L. This model might explain the relative experiment phenomena.

Air-Stable Ultrabright Inverted Organic Light-Emitting Devices with Metal Ion-Chelated Polymer Injection Layer

Here,this work presents an air-stable ultrabright inverted organic lightemitting device(OLED)by using zinc ionchelated polyethylenimine(PEI)as electron injection layer.The zinc chelation is demonstrated to increase the conductivity of the PEI by three orders of magnitude and passivate the polar amine groups.With these physicochemical properties,the inverted OLED shows a record-high external quantum efficiency of 10.0% at a high brightness of 45,610 cd m^(-2) and can deliver a maximum brightness of 121,865 cd m^(-2).Besides,the inverted OLED is also demonstrated to possess an excellent air stability(humidity,35%)with a half-brightness operating time of 541 h@1000 cd m^(-2) without any protection nor encapsulation.

Dependence of Performance of Organic Light-emitting Devices on Sheet Resistance of Indium-tin-oxide Anodes

The dependence of the performance of organic light-emitting devices（OLEDs） on the sheet resistance of indiumtin-oxide（ITO） anodes was investigated by measuring the steady state current density brightness voltage characteristics and the electroluminescent spectra. The device with a higher sheet resistance anode shows a lower current density, a lower brightness level, and a higher operation voltage. The electroluminescence（EL） efficiencies of the devices with the same structure but different ITO anodes show more complicated differences. Furthermore, the shift of the light-emitting zone toward the anode was found when an anode with a higher sheet resistance was used. These performance differences are discussed and attributed to the reduction of hole injection and the increase in voltage drop over ITO anode with the increase in sheet resistance.

Negative capacitance in doped bi-layer organic light-emitting devices

This paper reports that the doped bi-layer organic light-emitting devices are fabricated by doping in different regions of the light-emitting layer, the admittance and luminance spectra to characterize the capacitance and luminance of the device are measured. Negative capacitance （NC） appeared at low frequencies when the doped devices are biased with high voltages. The measured phase difference between AC voltage applied across the device and AC current flowing through the device show that the device is inductive when NC appears.

Polymer light-emitting devices using poly(ethylene oxide) as an electron injecting layer

The performance of polymer light emitting devices(PLEDs)based on polyvinyl carbazole(PVK)is improved by introducing a nanoscale interfacial thin layer,made of poly(ethylene oxide)(PEO),between the calcium cathode and the PVK emissive layer.It is believed that the PEO layer plays a key role in enhancing the device performance.In comparison to the device with Ca/Al as the cathode,the performance of the PLED with PEO/Ca/Al cathode,including the driving voltage,luminance efficiency is significantly improved.These improvements are attributed to the introduction of a thin layer of PEO that can lower the interfacial barrier and facilitate electron injection.

High-contrast top-emitting organic light-emitting devices

In this paper we report on a high-contrast top-emitting organic light-emitting device utilizing a moderate-reflection contrast-enhancement stack and a high refractive index anti-reflection layer.The contrast-enhancement stack consists of a thin metal anode layer,a dielectric bilayer,and a thick metal underlayer.The resulting device,with the optimized contrast-enhancement stack thicknesses of Ni（30 nm）/MgF 2（62 nm）/ZnS（16 nm）/Ni（20 nm） and the 25-nm-thick ZnS anti-reflection layer,achieves a luminous reflectance of 4.01% in the visible region and a maximum current efficiency of 0.99 cd/A（at 62.3 mA/cm 2） together with a very stable chromaticity.The contrast ratio reaches 561：1 at an on-state brightness of 1000 cd/m^2 under an ambient illumination of 140 lx.In addition,the anti-reflection layer can also enhance the transmissivity of the cathode and improve light out-coupling by the effective restraint of microcavity effects.

Study on Microcavity Organic Light-emitting Devices Containing Negative Refractive Index Dielectric Layer

A new structure containing negative refractive index dielectric layer（NRlDL） is introduced into microcavity. The properties of the new mierocavity organic light-emitting devices（MOLEDs） are investigated. In the experiment, the transfer matrix method is adopted. The dependence of reflectance and transmittance on the refractive index and thickness of NRIDL are analyzed in detail. Compared with the electroluminescence spectra of non-NRIDL diodes, the line widths of the spectra of the MOLEDs are narrower and all the peaks enhance. The results show that the new structure is beneficial to improve the performance and reduce the thickness of microcavity devices.

Lowering the driving voltage and improving the luminance of blue fluorescent organic light-emitting devices by thermal annealing a hole injection layer of pentacene

We chose pentacene as a hole injection layer（HIL） to fabricate the high performance blue fluorescent organic lightemitting devices（OLEDs）. We found that the carrier mobility of the pentacene thin films could be efficiently improved after a critical annealing at temperature 120℃. Then we performed the tests of scanning electron microscopy, atomic force microscopy, and Kelvin probe to explore the effect of annealing on the pentacene films. The pentacene film exhibited a more crystalline form with better continuities and smoothness after annealing. The optimal device with 120℃ annealed pentacene film and n-doped electron transport layer（ETL） presents a low turn-on voltage of 2.6 V and a highest luminance of 134800 cd/m^2 at 12 V, which are reduced by 26% and improved by 50% compared with those of the control device.

Tunable surface plasmon-polariton resonance in organic light-emitting devices based on corrugated alloy electrodes

We report a feasible method to realize tun able surface plasm on-polarit on(SPP)res onance in orga nic light-emitt ing devices(OLEDs)by emplo ying corrugated Ag-Al alloy electrodes.The excited SPP res onance in duced by the periodic corrugations can be precisely tuned based on the composition ratios of the Ag-Al alloy electrodes.With an appropriate composition ratio of the corrugated alloy electrode,the photons trapped in SPP modes are recovered and extracted effectively.The 25%in creaseme nt in luminance and 21%enhan ceme nt in curre nt efficie ncy have bee n achieved by using the corrugated Ag-Al alloy electrodes in OLEDs.

Developments and challenges ahead in blue perovskite light-emitting devices

Recently,perovskite light-emitting diodes(Pe LEDs)have developed rapidly in the green,red,and nearinfrared light emissions,owing to the unique optoelectronic characteristics of halide perovskites,such as high carrier mobility,narrow emission linewidths,high photoluminescence quantum yield,as well as bandgap tunability.However,the efficiency improvement in blue(especially deep-blue)Pe LEDs is still inferior to other analogs,which severely restricts the Pe LED applications.Here,we systematically summarize the substantial progress in the performance of blue Pe LEDs based on different blue perovskite candidates,and recent advances from three aspects(i.e.,the sky-blue,pure-blue,and deep-blue light emissions).Then,we point out several challenges existing in deep-blue Pe LEDs,such as the effect of Cl-ions incorporation,spectral instability,ion migration,and the difficulty of charge injection,and highlight the strategies to improve device efficiency,to motivate further research and development of blue Pe LEDs.